Soundbar/wifi automatically turning on and off

Hi,
I have a HP dv7t-3000 notebook. This notebook has the 'touch sensitive' bar on top of the keyboard with entertainment controls like volume/mute/play-stop-forward etcc.. and the wifi 'touch sensitive button'
My problem is that these are being automatically turning on and off. My volume for example is automatically going up and down. My sound at this very moment is turn 'mute' on  and off like every second. My wifi is also turning on and off- the wifi 'touch sensitive button is turning red and blue repeatedly' (so on and off)
My question is, is there a way to DISABLE this whole 'touch bar'. I never turn my wifi off so I don't need that stupid button, and I'd rather control my volume in Windows than to have this stupid thing keep changing volumes up and down and muting on and off.
So I'd just like to keep wifi-on and then have this stupid bar be disabled! Who cares about these buttons if they're gonna behave like this.

If you updated to iOS 7 then I believe its something with iOS 7 because you are not the only one who has that problem, try to restore your iPhone and see if the problem is solved. If not , wait for iOS 7.1 it should be fixed on that new software.
Note:- don't forget to back up your phone before restoring or you will loose all your stuff.
-Let me know if this helped you, have a nice day :) ~iMond
For more news and help, Like this page on Facebook: www.facebook.com/inewslate
and there you can send your questions in a message.

Similar Messages

  • My wifi keeps turning on and off by itself. Help please

    My wi-fi keeps turning on and off by itself. Please help.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Can iPod be set to automatically turn on and off at certain times?

    At my work, I have been using my iPod to play overhead music through the PA system - using the radio feature mostly, but sometimes a playlist. However, I have to remember to turn it on and off everyday, which doesn't always work out too well. Is there a feature that can be set so that it will turn itself on automatcially each day and turn off automatically each day? Its the Nano, sixth generation. Any feedback is appreciated!

    You can set a time in the clock but that wouldn't be much of an improvement because you would have to do it every day.

  • Help! Wifi keeps turning on and off repeatedly

    Hi,
    So I've been having this problems where randomly my wifi signal will suddenly turn off for like 3 seconds, then turn back on for 3 seconds, then turn off for 3 sec, etc etc... it will do this for like an entire afternoon! So it won't let me on the internet. Sometime I can get it to stop temporarily (when I say temporarily, I mean like for 5 min) when I turn airport off, then turn it back on. But it will just start up again in 5 min.
    I thought it was because I bought a cheap $30 Belkin wireless router, so I decided to breakdown and buy the $100 airport express router, thinking it would be top quality. But the problem still persists!
    However, I don't have this problem when I use my iPod touch with the wifi (the signal remains the same), so I'm thinking it's a problem with my laptop...
    I've been searching the internet for solutions, but I can't find anyone with the problem. Does anyone know how to fix it?
    I would really appreciate any advice, thanks!!!

    bump

  • How to Set Automatic to turn on and off at specified time my TV with STB

    It seems very frustrating talking with Verizon tech support, that's why I turn to you guys to find if anyone knows the answer to my question above.,from my experience calling verizon for my tech support regarding fiosTV and most of my experience from Verizon are either inept and giving the customer the run around by keeping you on hold for the longest and not having the answer after all the time I spend with the tech on the phone or they will tell you that the that there is no such thing; and when you call again when you get another tech on the phone you get completely different answer if not an inept answer. 
    My Specific question is, if  I turned off my STB (top box) and my TV at a particular time; and I like my TV with STB to turn on at a specified time ( example I turned off my STB and TV at 9:00 PM ) and would like my TV with the STB to be turn on like 11:00 PM to turn off at 12:00 midnight by itself, not to record  but just to turn on as reminder and to serve as power saver incase I fall asleep ( this is just example scenario). How would I do that? The manual of either remote control or the STB does not provide that information. My television manual say the TV can but I can not turn it on automatically with the STB connected.
    I called Verizon tech, he first sounded inept and sounded like he just talking from a scripted lines, and would not tell me straight forward that he does not know the answer; I  explained that I switched to Verizon Fios for its claim in high and advance technology as they compare themselves by far higher in technology as compared with Cable or direct TV, and with Cable Vision I was able to used the above automatic turn on and off with the remote; I asked for his supervisor or maybe more expert tech support, He turned over the call to his supervisor, who told me that the STB or the remote Fios TV does not have that level of capability which sounded to me like a joke, he also told me that the STB can not be turn on and off because STB is always set as on; I told him I can see the green light turns on and off on the STB each time I press the ON button on the Verizon Remote; he defended that its always on because the timer is ON, and he told me instead FIOSTV has another feature that although it will not turn the feature on and off automatically, it will serve as reminder, I asked him How to carry out that function, the tech supervisor said  to me to just press the record button on my remote, which I know right away that it will just record, and  I told him that its not what I want to accomplish, this Tech Supervisor insisted that it will not record but will set to notify me, but surely it did record and it just wasted and used my DVR memory capacity the time when he put me on hold for a long period of time, I knew it recorded because the red button on the STB/TVR was on., and it did not notify me in anyway what time the TV and STB will turn on. That was a complete  waste of time, instead of him getting the issue to higher level of their tech support and try to research thru and get back to the client. To me, simple feature as this, is such absurd to claim that fiosTV has more advance features than others, where infact they can not even have their tech support answer such simple question.  
    Any one here has any idea, please help.

    The set top box does not offer any auto on or auto off feature. 
    you can only do that if your TV offers the feature. 
    If neither your TV nor the STB offer that feature (in this case the stb does not offer) then you can go to a radio shack or a similiar store and purchase a AC timer.  they make them and you plug them into your wall, they are very cheap.
    I have had directv and fios and neither of my systems did an automatic on or off. 
    BUT my samsung TV upstairs does have that feature (auto on and off)   and I have not checked my mitsubishi downstairs. 
    so you may want to check your settings on your TV to see if it will do it, like my samsung does. 

  • Although I turned off WiFi, set as 'require admin password to turn on and off wifi, when I turn on my MacBook Pro, retina latest model, just got for a month, it turns on wifi automatically, is this a back door or virus or security hole? Thank you

    I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
    Is this a back door? Security hole?
    The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
    What is the problem?

    I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
    Is this a back door? Security hole?
    The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
    What is the problem?

  • My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

    My iPod cannot turn on, however it can when it is on my iPod dock. It won't even sync into my computer. Once I take it off of my dock it automatically turns black and I can't turn t on. How can I get it back to normal?

    Does your home button work?

  • Can I assign the switch on the side of my ipad to turn on and off wifi?

    Can I assign the switch on the side of my Ipad to turn on and off wifi?

    No. The only choices are audio mute or orientation lock.

  • My backlit keyboard will not go off automaticaly i have the box checked but it still doesn't turn on and off. i am having to do it using the f5 and f6 keys. anyone know how to make it work automatically in low light?

    i am having a problem with my back lit keyboard on my 13in mac book pro. i have the box checked in the keyboard setting for auto so the keyboard should turn on and off in low light conditions but it doesnt. anyone know how i can getit to work properly?

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • How can I automatically have the XRAID turn on and off at a specific time?

    Hi Everyone,
    I was wondering if anyone can help me figure out how to turn on and off the XRAID at a specific time. My electrical bills are crazy. Is there a way to get this done?
    Thanks,
    Jorge

    Hi Everyone,
    I was wondering if anyone can help me figure out how
    to turn on and off the XRAID at a specific time. My
    electrical bills are crazy. Is there a way to get
    this done?
    Thanks,
    Jorge
    I think turning the RAID on and off periodically is a bad idea. But if you really really really want to do this ....
    Connect the xserve raid to a 'metered power strip such as those provide by APC. you can telnet to the power strip via the network to power off individual port)
    write a script (run on the xserve or powermac that the RAID is connected to (direct or via switch)
    0) quit application (issue a quit command or if the application have a stop command (example databse can be stopped)
    1) unmount volume (must)
    2) issue a telnet command via expect script to control the power strip to power off the array.
    If you have java cli access to the array (see alienraid.org).(I have not tried this before.)
    http://alienraid.org/article.php?story=xserveraidtools12&query=command
    You can issue a command to execute the RAID admin shutdown command.
    Put the master script into a unix cron job.
    macbook pro   Mac OS X (10.4.7)   typing this on a white box pc

  • Help, My iPod just turns on and off...my PC doesn't even get to "see" it.

    I just got the 5G 60 Gig iPod. I was charging it for the first time. And of course windows wanted to jump on in. iTunes started up and wanted to transfer music, the unit wanted it's initial setup, but iTunes switched it over to th Do Not Disconnect mode. I got the register your new iPod screens to come up, then music started automatically transfering. Then I got I must reboot my computer screen...I ignored it, figuring it had to finish getting the music transfered. Then about a 1/3 into the music tansfer, I got some kind of could not find error concening the music, then my computer stopped doing anything. I did a restart, no all my iPod does is turn on and off by itself, (from the Apple icon, to back off) and won't stop doing it. I tried resetting the unit, but then it still continues. Connecting and reconnecting the USB cable, restarting the PC etc....Help, what do I do. Frustrated is beyond what I'm feeling right now...I keep thinking what the **** I just spent, for this to be the end result!! Is this unit fried? Or will it get damaged!!! HELP

    I had exactly the same issue when connecting my new BLACK 60mb Video iPod to connect to my PC via USB 2.0.
    The iPod kept Crashing & Freezing also iTunes become unstable and very slow, it kept saying "unable to write to disk" every 5 minutes and I had to disconnect & re-connect for the same message to show again in 5 mins later, it eventually told me not to disconnect the iPod. However, after 30 mins i just did it.
    I then opened iPod updater and re-attached my ipod with USB 1.
    This seemed to take an age to recognise (5 mins +) but bear with it. Once it was connected I reinstated to factory settings, once I did this it automatically told me to update my software to 1.1.1.
    When I then opened iTunes it again took 5 mins to connect, but it then started to transfer my music, which took over 6 hours to do 22MB.
    Having said that I have had no "can not write messages"
    Today I have conencted (again taking 5 mins to connect) but it has transfered over 1000 photos in under 4 mins and updated all tunes.
    hope this helps,

  • Ipod nano keeps turning on and off

    My ipod nano keeps turning off and on automatically and when I push a button once its on then it freezes, and when I reset it then it starts turning on and off again....what do I do someone please help me

    Hello Mo0nangel,
    Welcome to Apple Discussions.
    First, try updating the iPod software. Follow the steps in this article:
    Updating iPod software
    If the problem persists, you may have to restore your iPod:
    Restoring iPod to factory settings
    Unfortunately, restoring will wipe your nano clean of all songs and photos.
    Gary

  • Clicks & glitches in the automation when bypass turns on and off

    I get clicks & glitches when I automate logic plugins to turn on/off (bypass) on an audio track. The clicks & glitches happen at the point in the automation when bypass turns on and off.
    Has anyone else experienced this?
    Who can help me with this?
    Thanks so much
    ps - I use Logic Pro 8

    Certain fx plug ins unfortunately just do that when you switch them on and off while audio is passing through them. It's not technically a bug, it's just the way the audio is handled by the plug in that means it can't manage to cleanly cut in and out. When this happens, you have to use alternative methods such as the one already suggested. Depending on what you need to do there are other ways around this. If you're able to engage/disengage the plug in at moments of silence in the audio (such as in between words in a vocal track), then you could use volume automation to go in very precisely to silence the clicks when they happen. But if you're automating the effect on continuous audio, sereen's suggestion of using an aux and automating the send is a more appropriate workaround. Another technique is to just bounce an entire copy of the track with the effect on it, and then just edit it in and out (still on a separate track if you like) as needed, this way you can use fades as well to clean it up. But this is only appropriate in certain situations and might not be the right approach depending on what you're doing.

  • HT203483 My Wifi is Glictching on and off

    Wifi is glitching on and off, it i s the ipods problem, the wifi is fine on all other devices

    I guess you did not like the suggestions in the reply to your other post 18 hours ago
    My wifi keeps disconnecting automaticly
    . Making a new post and not even referencing the previous post/replies is counterproductive and rude.

  • New 5th generation headphones keep turning on and off my music. Which wire do I cut to disconnect the control system for the right earbud

    The wires are probably loose in the rubber and the control panel on the right ear bud keep turning on and off my music, summoning s voice, and turning up and down my music. It's really obnoxious and I would like to know which wire to cut to disconnect the control panel. Thanks.

    I had exactly the same issue when connecting my new BLACK 60mb Video iPod to connect to my PC via USB 2.0.
    The iPod kept Crashing & Freezing also iTunes become unstable and very slow, it kept saying "unable to write to disk" every 5 minutes and I had to disconnect & re-connect for the same message to show again in 5 mins later, it eventually told me not to disconnect the iPod. However, after 30 mins i just did it.
    I then opened iPod updater and re-attached my ipod with USB 1.
    This seemed to take an age to recognise (5 mins +) but bear with it. Once it was connected I reinstated to factory settings, once I did this it automatically told me to update my software to 1.1.1.
    When I then opened iTunes it again took 5 mins to connect, but it then started to transfer my music, which took over 6 hours to do 22MB.
    Having said that I have had no "can not write messages"
    Today I have conencted (again taking 5 mins to connect) but it has transfered over 1000 photos in under 4 mins and updated all tunes.
    hope this helps,

Maybe you are looking for

  • How do I set the frame size

    I am Making a program for purchasing games, with the basic layout alsot done, except on problem. When the purchase button is pressed, a dialog shows up but nothing is seen until i resize it. How would i set the frame size so that i do not need to res

  • Silverlight plug-in update - can't get it to work

    Silverlight plug-in disabled on Mac laptop: I tried updating several times - I get a message telling me that the update is installed - but the the plug-in remains disabled. How do I get the update to work? Thank you.

  • Handling Execption in ccBPM.

    Hello to All. Recently I working with SAP XI (now SAP PI) since one month ago, I have a few experience with this module. I need to handle execption and error. I read about that , some persons told me use BPM . and other said use Fault Message Type. P

  • Issue in Price record determination

    Hello All, Scenario: The sales order has to determine 2 types of tax ( service , VAT)in the pricing procedure, so the customer classification has respective  parameters and the price conidtions are maintained for both the condition types the problem

  • Java httpservlet and php

    Hi. I'm trying to work out an interface in php for a java http servlet. But i have some problems when i try to redirect my response to the php page. Any idea how i can do this (or if i can do this)?