Soundblaster Audigy 2 + Additional Audio Slots in the PC-.C

Shalom!
Im using a Soundblaster Audigy 2 on an Asus KN8E Deluxe 754 with a case that has 2 front Audio "slots" (sorry for my non-technical English) (headphonse and microphon)
How Do I set up my board an my soundcard to recognise these two additional audio slots? it is really unnerving to have to get at the back of your pc every time you want to use your headset.
Would anybody be as kind to help?
Thank you
Szandor

radodrill,
It's always difficult to troubleshoot equipment I don't have. But the manual for your Videomate (p27) says that newer Compro TV cards "have PCI audio feature which enables audio through the PCI interface." As best I can tell, this is enabled by selecting "By PCI Audio" in the System Device in "Settings of ComproPVR." If you have that option, you probably want to disable this so that the Videomate uses the cable and does not transmit over the bus.Message Edited by Katman on 03-0-200602:47 PM

Similar Messages

I purchased an additional audio function for the apps ＂baby monitor＂today, but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

I purchased an additional audio function for the apps ＂baby monitor＂today， but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

Refund
http://www.apple.com/emea/support/itunes/contact.html

All additional audio tracks in synchronized or compound clips are merged into the mono-mix.

Hi all.
I have a video with a stereo track and six separate audio tracks from set. I synced them. If you open the synchronized clip in a separate timeline, all audio tracks are on place and have their names. But if I append it to the storyline and expand audio components, there are only two audio tracks: monomix from the original video with its name and one stereo track named "a1", which is a mix of all additional audio tracks. The same thing happens if I make a compound clip, with a small difference. It forced me to give up the work I wanted to do.
Screenshots:
https://www.dropbox.com/sh/frvgk3d1hjbo6s6/Y3AWxAirnn
Any thoughts?
Victor

Multicam works, but it is not very convenient. I can not use Sync-N-Link as I had planned, I get problems with export AAF and DaVinci do not like multicam in XML.
Channel configuration mirrors two tracks in the storyline, as you can see in the screenshots.

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

Problem:
I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2.
When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I have no problem, but when I install version .0.4.077 (in this example: or I install version 055 or I install version 077), I have the following problem: (through Control Panel) in system properties/hardware/device manager, I find PCI Device listed in " other devices " with a black exclamationmark in a yellow circle, while the SB Audigy LS is listed in the group " sound, video and game controllers ". The soundcard works, which is great but why is the exclamationmark showing? I already tried a different PCI slot, IRQ assignement in BIOS, but is still shows. The strange thing is, if I install first version 055 and then version 077, the problem is gone. A new problem that occurs if I do so, is that the PC hangs when starting Windows (but I'm not sure if that has to do with the fact that I install version MediaSource 5 Player-Organizer 5.20.23 over version 5.0.38, just to keep the MediaSourceGo! Toolbar (because it's no longer part of the softwarebundle version 20.23 - which has been confirmed by the support of Creative), the same with version of CD Burner Plugin 5.0.44 over 5.0.3 because it's not really clear on the website, if you need the previous version or if it's a full "update"). Please URGENT (with detailed info on every explained problem/issue - so I can try to resolve it) help.
Thanx,
Oli4
Message Edited by Alejandrootje on 0-02-2008 09:55 PMMessage Edited by Alejandrootje on 0-02-2008 09:56 PMMessage Edited by Alejandrootje on 0-03-2008 0:38 PMMessage Edited by Alejandrootje on 0-06-2008 02:9 AM

maybe you should ask Eugene Gavrilov (?) to write his KX-Drivers for MSDOS too.. maybe he'll do so if you donate him an Audigy 4 *lol*

Audio Trouble: SoundBlaster Audigy with ABIT AS8 motherboa

Having trouble getting audio to work on my new ABIT AS8 motherboard. No mixer device detected. No audio devices detected.Creative SoundBllaster Audigy Card and Software/drivers are installed.Have uninstalled ABIT's Realtech '97, etc. hardware from system, but still no sound. When uninstalled, message appears saying 3D.dll program from ABIT uGuru audio driver is needed. Have uninstalled and re-installed SoundBlaster Audigy software/drivers, but still no go. Get message saying detects previous sound driver which can interfere with audio function during installation, even when ABIT Realtech '97 audio software/drivers are supposedly uninstalled. No other sound drivers or software is on my system.Seems that Multimedia Audio driver has to be the uGuru, AS8 audio driver!
Want to use my SounBlaster software on my system...Any help will be much appreciated!

Thanks for the reply.
I've got everything working after an MS service pack 2 update.
Still have a question mark by multimedia device controller in the device manager, though...
Do I still need to disable the on board sound divice in the system bios?
Will this help out with the multimedia device controller issue?
thanks a bunch!!

Updating drivers for the Soundblaster Audigy 2

Okay here's my problem, my original driver from the CD was dated from August 2004 so I decided to use the autoupdate. It installed the new driver but then my eax, and pretty much everything else wouldn't work. I followed all the uninstall directions given on the site and then only installed the newer driver, it does work fine but it seems that when you?download the standalone drivers it'sdoesn't come?with anything except for a small basic creative?audio control panel and no graghic equalizer and trying to figure out what else I need to download is confusing as hell. After that I uninstalled the new driver, cleaned?everything out,?I?went to put the CD in to go back to the original driver and it tells me there's no soundblaster card detected even though the autoupdate detected it just fine. So now I'm back to using the updated driver. As I said before it does work fine and I really don't use EAX or any other effects for games or movies but I would still like a graphic equalizer. Does anyone know if I can download a standalone equalizer for this driver?

i installed all these? and have all the cards functions ..A 2ZS driver dated 9 oct 06DTS Neo? 6 dated 22 Dec 06? , CD Burner plug in 22 Dec 06? , Creative Media Source Player? 22 Dec 06 , Vienna Sound Font? 29 Mar 06 , Creative Media Source DVD Audio? 25 Jan 06 ,? i also have Media Source Player dated ?3 Aug 05 ? and all the Aug 05 Dated software installed as i have a remote that will not wotk with Media Player 5www://us.creative.com/support/downloadsselect Soundblaster then ?Audigy , then Audigy 2 ZS , to find the softwareMessage Edited by Toronto699 on 08-05-20070:4 AM

I have a 27" IMac. I want to add additional monitors to it. There is a vga slot for the first monitor. I would like to add a second monitor but there is not another via slot. Is there an adapter I can get for via to usb?

I have a 27" IMac. I want to add additional monitors to it. There is a vga slot for the first monitor. I would like to add a second monitor but there is not another vga slot. Is there an adapter I can get for vga to usb?

Here's the problem I am trying to research for you...
There does exist a way to add a second monitor via USB:
USB 2.0 to HDMI Audio Video 1080P Adapter for Windows and Macbook
It's the only device I know of that can do that. The problem is that it wants a HDMI connection. So that means a HDMI-to-VGA adapter or converter needs to be found (not VGA-to-HDMI, those are easier to find).
Interesting article realted to this:
Hdmi to vga adapter
Maybe somthing like this converter will work.

TS4498 Can i move my installation of Logic 10 to another hard drive, as its nearly full and i want to free up space so i can install the additional audio files too.

Hi All,
       ....i've recently bought and downloaded Logic Pro X.........the software is great.......i love it. But when i bought it from apple, it gave me no choice where to install it. It just went ahead and installed it in the drive which has my operating system in it. Which, in itself is not a problem........but, in my case, the hard drive in question is almost full...........so when i decided to add the additional audio files which come with Logic...........a message was displayed that not enough free space is available for additional audio files.......please remove files to free up space!
        I would love to free up space, but i only have a small 64gb SSD (which is where my operating system is installed). Normally, by moving files around (to another hard drive for example) would be the answer to this problem, but.........and here's the problem..........Logic, and my operating system cannot be moved to another hard drive, once installed it seems logic is there for good.
        Come on Apple!!!!!!!!!!.................i have a terrabyte of space on my other hard drive!! ready and waiting for some music files and or Logic!!!! .........why on earth could you not of given me the option of an installation disk choice!!!!!
      .......well, it seems i'm stuffed now, and £130 lighter in the pocket. I could be the next Mody or Fat Boy Slim............but alas............it's not even looking like i'm gonna even be a one hit wonder.
     ........if anyone knows how to move logic to another destination drive, please help and when i'm famous, i'll sing at your wedding :-)

The vast majority of applications must be install on the system drive in order to run correctly.
Generally the applications take up very little disk space. It is usually the files they produce that need the space. Seeing as how I don't use Logic I can't do this but you might want to check how to move the files generated by Logic to another drive.
Allan

What can i do to fix the following : You may need an additional audio decoder to play the soundtrack of this file. This file contains a track in the Dolby AC3 Audio (code "8192") format. You may need to install a DirectShow decoder for this audio format i

You may need an additional audio decoder to play the soundtrack of this file.
This file contains a track in the Dolby AC3 Audio (code "8192") format. You may need to install a DirectShow decoder for this audio format in order to hear the soundtrack of this file.

Luckily, there are DOZENS of video/media players and extensions avaliable for the Mac. Many of them are FREE, some of the better FREE ones are...
PERIAN (quicktime extension)
http://perian.org/
QUICKTIME 7.6.6
http://support.apple.com/kb/DL923
VLC media player
http://www.videolan.org/vlc/
NICEPLAYER
https://code.google.com/p/niceplayer/
And if none of those work, there is a possibility that those video files may be corrupted.

The soundblaster audigy problems.

hi, i just registered here. i'm very glad to see you guys. but i have a problem. when i'm listening music, my computer is making noise (when the hard disc transfers datas).
my computer is made up :
MSI-KT3 ULTRA AR-U (MS- 6380E) (BIOS VER.5.7)
AMD ATHLON XP 2100+
DDR 266 512MB (MT)
DDR 266 512MB (KINGSTON)
MAXTOR 6L080J4 80GB
HL-DT-ST CDRW GCE-8400B (LG 40X12X40X)
SONY DVD-ROM DDU1612
SOUNDBLASTER AUDIGY GAMER
MSI-MS-STARFORCE GEFORCE 4 TI 4600
(AGP 4X, 128MB)
REALTEC RTL8139/810X FAMILY FAST ETHERNET NIC
MS WINDOWS HOME EDITION XP SP1

MY OS IS HOME EDITION XP SP1. IRQ IS 17. BUT I CHANGED IRQ MANY TIMES. IT DIDN'T WORK. I THINK MY NETWORK CARD IRQ SAME AS SOUNDCARD.
MY POWER SUPPLY BRAND NAME IS 'HIGH POWER', +3.3V 28AMPS, AND +5V 30AMPS. (PEAK LOAD 340W, 285W MAX.

Remote Audio Jacks for the Sound Blaster Audigy 2

Hello My case has built in remote audio jacks on the front panel. Is it possible to hook up my Sound Blaster Audigy 2 ZS to this system? I have several individual cables that I connect to a sound card to provide remote audio jacks at the front of the PC. Is this possible? Thanks

Are you are asking for something like this?http://audigy2zshowto.blogspot.com/

Creative Zen Plus & Creative Soundblaster Audigy 4. Can the two be linked in any w

Hello and good morning. I've an extensi've collection of music consisting of 35,000 tracks which I play through my Creative Soundblaster Audigy 4 via my hi fi system. In order to access these tracks when using the Creative Zen Plus, I notice it calls up only the file name which is a time consuming effort to get tracks transferred. To your knowledge,is there a way to use the Creative Soundblaster to 'drag and drop' individual tracks straight into the Creative Zen using the 'burn now' facility?
Any help and assistance would be highly appreciated. Thank you very much indeed for your help.
Alan L.

Didn't your soundcard come with MediaSource? If so, you can transfer the tracks that have already been converted to MP3 or WMV format directly to your player. MediaSource also displays the content by ID3 Tag titles once they've been entered into the Music Library.

How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
But in BIOS is possible set only disable or auto-detect. When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard. Please tell me, what can I do for enable both audiocards ?

It's been awhile but as I promised here is my update:
I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

SoundBlaster Audigy Probl

Ok I've been having a LOT of problems lately with my SoundBlaster Audigy. Recently I decided to take out one of my two hard dri'ves and once I installed windows to my other hard dri've my sound card started acting funny. Sometimes it works, most of the time it doesn't. When I try using the install file for the card it says "No Soundblaster detected."? When I check my Device Manager I see this:??Other Devices
?Multimedia Audio Controller?and for some reason I see this as well:?Network Adapter
?!394 Net Adapter?It only shows the network adapter when the sound card is in the PCI slot. When I do a properties on the Sound card I see this:?The drivers for this device are not installed. (Code 28)To reinstall the drivers for this device, click Reinstall Driver.
Device Type: Other Devices
Manufacturer: Unknown
Location: PCI Slot 3 (PCI bus 2, device , function 0)
Driver Provider: Unknown
Driver Date: Not available
Driver Version: Not available
Digital Signer: Not Digitally Signed?Ok now here is another thing that happens..... I decided to install the sound card by going through the Device Manager and it installs. Well when I check the Device Manager it shows up as this:?Emu0Kx Audio (DF80)
Creative Auidigy Audio Processor (WDM)Device Type: Sound, video and game controllers
Manufacturer: Creative Technology, Ltd.
Location: PCI Slot 3 (PCI bus 2, device , function 0)Driver Provider: Creative
Driver Date: 8/2/2002
Driver Version: 5.2..253
Digital Signer: Microsoft Windows Hardware Compatibility Publ?Resource type - DF80 - DF9f
IRQ - 23?The Network Adapter Says this:?Network Adapter
?!394 Net Adapter?This device cannot start. (Code 0)Click Troubleshoot to start the troubleshooter for this device. Device Type:? Network Adapters
Manufacturer: Microsoft
Location: On OHCI Compliant IEEE 394 Host Controller
Driver Provider: Microsoft
Driver Date: 7//200
Driver Version: 5..2535.0
Digital Signer: Microsoft Windows XP PublisherDriver Files:
C:\WINDOWS\System32\DRIVERS\nic394.sys?But! When I try to install the soundcard with the install file it still says I don't have a SoundBlaster. I have used the updated install file as well as the v.0. I am not understanding this at all. No matter what I do the soundcard doesn't show up as a SoundBlaster. But I have sound, not as the correct soundcard, but I do have sound. When I did get it to work and show up as a SoundBlaster Audigy, it works for maybe a few hours then I get a horrible screeching sound from my speakers then my computer freezes up. I restart the computer and my Soundcard is gone again.
Does anyone have any ideas what I can do to fix it or can I? Is my soundcard going bad? Any help is appreciated, thanks.

Wrothgar,
Try following these uninstallation steps from this Knowledgebase article SID72. After you have finish uninstalling and removing all the files as instructed from the guide, do not reboot but shutdown the computer and remove the soundcard from the computer instead. Next, power on the computer without the soundcard and then let Windows finish its startup before shutting it down again. Slot the soundcard back into the computer and proceed with the re-installation from the CD.
Jason

Soundblaster Audigy 2 + Additional Audio Slots in the PC-.C

Similar Messages

Maybe you are looking for