Soundblaster Audigy 2 Value and Digital I/O Mod

I recently bought this card, and the shop I bought it at did not sell the Digital I/O Module. I was wondering if anyone knew somewhere in Australia where I could buy it.

Only place I've ever seen any of the bays sold is on Creatives UK online store and then its for an A2ZS so not sure it will work for you for basically 80 pounds with VAT. Here's a link for it http://uk.europe.creative.com/shop/product.asp?prod=588

Similar Messages

  • Audigy Value and Digital Out probl

    I read the faq.
    I have the Audigy Value card with the digital I/O mini-jack. I tried using a standard optical cable with an adapter mini-jack "cap" to pop on one end to plug into the sound card, and the other end into my digital in on my stereo. I still can't get any sound, is there some setting I am missing.
    I pop in my Hercules sound card that has a normal type optical out and everything works fine without me messing with it, so I know it isn't the stereo input.

    Fuzzylogic,
    These articles should help explain what is going on:
    http://us.creative.com/support/kb/ar...p?l=2&sid=5764
    http://us.creative.com/support/kb/ar...p?l=2&sid=4858
    Jeremy

  • SoundBlaster Audigy Value: Delay and echoing of sound output from head

    I'm having problems with the sound output of my voice when chatting using a headset.. I can hear echoes and there are delays occasionally. I first thought the problem was with the headset, and so I changed it. However, the problem persists!
    When I plugged my headset in my laptop instead of the desktop with the Audigy Value installed, I didn't encounter any problems at all with the sound. So I thought the problem is with the Audigy Value souncard.
    What could be causing these problems?

    You need set the ASIO latency through CT ASIO panel and not through Audition settings. ASIO Panel has only settings as milliseconds so if you select 10 or lower value your delay problems should be fixed.
    jutapa

  • Audigy 4 and digital NAD L70 surround system - No surround?

    Hi guys and girls.
    I have a fine Audigy 4 sound card and an even more fine NAD L70 A/V surround system (DVD player and mid-powered surround amplifier - The baby brother of this one: http://www.nadelectronics.com/av_rec...73_framset.htm ).
    I have 4 speakers connected to the L70, 2 front and 2 rear.
    My problem is, that I cannot get any sound out of the rear speakers, when testing e.g. the Creative Speaker Calibrator.
    I've connected the computer to the L70 via the Digital Out on the Audigy 4 and the Digital Coaxial In on the L70.
    I've set the Input Selector to Cable/Sat.
    I've set the Speaker Configuration to
    - Front: Large
    - Center: None
    - Surr: Large
    - Sub: None
    I've set the Creative Speaker Settings to "4/4.1 Speakers".
    Where am I doing wrong? Why is it so hard to set up to work correctly?
    And why cant I find a "Digital Out Only" button as with my old SB Live! 5.1
    I've tried several (all?) possible combinations on the computer side and on the amplifier side, with no help.
    I can get music from the computer to go to all speakers by switching between the surround modes on the L70.
    Has anyone tried anything like this?
    Very best regards
    Svend Koustrup / eSKape

    Lex,
    The information I gave Felix2 is not "horrible" or wrong, they are the truth. There is no need to start attacking again, if you are not clear on the information I gave in his thread, ask for more clarification, but do not attack.
    If you are having problems getting it set up, it's best to provide some detail on what settings you have changed, how everything is configured, and someone will probably be able to help you.
    The start of your post isn't very clear, do you have a standard Audigy 4 or an Audigy 4 Pro? The Audigy 4 Pro does have an optical output on the external dri'vebay, the standard Audigy 4 (just a card) does not have an optical output. You would need to connect through a coaxial input (minijack to RCA, then RCA-RCA).
    Cat

  • Difference between audigy value and sound blas

    Since i am unable to find comparisions between soundblaster 24bit and AudigyValue in site , Anyone can give me the difference between these two ?

    Other than the name, not much. Both cards lack the EMU0K/2 chip, and have to do all processing in software (cpu processing instead of on the card). Oh yeah and the Audigy SE has newer drivers than the Value (and will probably install on the SB 24 bit).
    All things considering if you are looking at a card for gaming (or just about anything else) avoid both of them.

  • Audigy Value and low profi

    Hi,
    I was looking for an sound card which I can use in a case with low profile slots. So I found the Creative Audigy Value. I think the height of it is ok but it seems that there is no low profile bracket for it. Can I use this sound card in such cases nevertheless?

    yes i have just bought the sound blaster audigy SE, not sure whether thats slim edition or slow or something but anyway its a half height card. I've been using the card unbracked for about a week with no trouble. If you are moving the PC about a lot it might flop from side to side about a bit but should be fine.

  • Please helpe me - Audigy 2 ZS and Digital I/O Mod

    <SPAN class=time_text>
    <SPAN>Hi,
    <SPAN>
    <SPAN>I bought the Creative Digital I/O Module, in the Creative Website, to have Digital sound from my sound card - SB Audigy 2 ZS - but now that I installed the I/O Module in the Digital Out of my card, I have no signal.
    <SPAN>It seems that Creative Digital I/O Module do not work with Creative SB Audigy 2 ZS, it'ss wright? Is any chance to have digital sound with this card and may speakers - Teac PowerMax 500, which have a decoder?
    <SPAN>
    <SPAN>Tanks
    <SPAN>
    <SPAN>JP
    <SPAN>
    <SPAN>(
    ps.
    I have read in one Portuguese magazine (PC Guia) that have made a configuration to have a PC to one room, with digital sound, and their used de Creative Aud. 2ZS with de Creative Digital I/O Module, but now I think the their are telling a big lie, since it seems that I/O Module doesn?t work with that card.)
    Message Edited by pedrom on <SPAN class=date_text>2-2-2005<SPAN class=time_text>02:57 PM
    Message Edited by pedrom on 2-2-2005 02:57 PM

    do you mean this?
    http://uk.europe.creative.com/shop/product.asp?prod=773
    base on the specification requirement there....it doesn't support audigy 2 zs....

  • Audigy 2 ZS and digital I/O mod

    Device manager states I have an Audigy 2 ZS, I'm running windows XP SP2. It has the digital jack on the top of it, and I purchased the "Digital I/O" module because it had an optical adapter on it. It's currently on my media center and I'm trying to get it connected to my surround sound. I've read a few threads about enabling the digital out only on the windows settings and I've done so. I still don't see any light coming through the cable.
    Is the Audigy 2 ZS not compatible with the digital i/o module? If not then why did I pay so much for an audigy 2 / why is there a digital out on it / how am I supposed to get an optical signal from it's Thanks in advance guys!

    do you mean this?
    http://uk.europe.creative.com/shop/product.asp?prod=773
    base on the specification requirement there....it doesn't support audigy 2 zs....

  • SPDIF passthrough with Audigy SE and Digital I/O Car

    Does anyone have this working or know if its possible with Vista 32bit's?Comparing my pc (built-in soundcard) with my new PC that has the Audigy, it looks like there are some tabs missing in Control Panel in the Playback->Digital Output Device screen, but I'm not sure if thats relevant or not. Maybe its possible to set SPDIF passthrough somewhere else?

    Ok, well...can anyone tell me, for certain, which cards work with SPDIF passthrough in Vista? I really need this working, and if I have to buy another card, that would suck, but I need it for my htpc.

  • Soundblaster Live Value and Windows

    I have been previously running Soundblaster Li've Value on an Windows ME computer without any problems. I have now upgraded to Windows XP, could you please advise what files I require to run Soundblaster Li've Value on Windows XP including the application file. Are any files required from the original Soundblaster CD. I would appreciate your advise. kevsim

    [size="3" face="Times New Roman">Catherina-CL, ?I thank you for the advice and for the others in sharing their experiences.
    [size="3" face="Times New Roman">I still have a few problems and would appreciate some further help.
    [size="3" face="Times New Roman">I have installed the update as suggested.
    [size="3" face="Times New Roman">When I was running Sounblaster under Windows ME, there was an applet called ?What You Hear?, I can now no longer find this applet.
    [size="3" face="Times New Roman">The other issue is, previously I had a sound recorder which would record in stereo, since the upgrade I can no longer find this, it was part of Soundblaster.
    [size="3" face="Times New Roman">kevsim

  • Onboard Realtek HD audio vs. Soundblaster Audigy Value?

    I have a SB Value from my old setup, it has eax 2.0 or 3.0
    But the MSI P965 Neo realtek hd audio sounds good also.
    What gives the best performance during games? methinks its the SB value but I want to here from you thanks..
    cheers!

    Neo's audio "sharks", Platinum's slightly "battle", Creative's? well.... I use Digital Out always so the audio analog filter on the boards are useless.. unless Realtek chip did something amazing to reduce Dolby Digital Encoding quality... So, for Creative, well... their digital output "sharks" as they don't have DD or DTS encoding capability, their analog filters still no match to those real digital content. REgardless XP or Vista, well, I am still satisfied.

  • Soundblaster Live Value with Digital Audio Output Card Help

    ; Hi, I have an?0 yr old?gateway with this sound card system and am trying to play an aftermarket Logitech Z-4 speakers without success. I get nothing. Will this sound card work with these speakers? Should I try to download drivers from Logitech? Changes to Bios? Any help would be appreciated. Thanks, [email protected]

    Salut M?lancolie
    Donc pour la li've elle fonctionne tr?s bien sous xp j'en ai 2 encore a ce jour
    Seul les logiciel fournis avec ne fonctionne plus.
    Pour les driver je te conseille de prendre les derniers pour la X-FI , ils regroupe aussi les drivers pour la li've :
    http://www.touslesdrivers.com/index.php?v_page=23&v_code=2660
    Cepandant il faut qu'une fois t?l?charger tu d?compresse dans un dossier et tu installe manuellement les pilotes par mettre a jour les drivers / choisir moi meme dans une liste, la il te d?tectera la li've et te l'installera, tu reboot et hop
    Salut.

  • Audigy Value and Windows Vista 64-b

    can any one get me this drivers can not find it in the database

    Should have looked in the Vista section,?http://forums.creative.com/creativel...essage.id=8972

  • Windows Vista vs. Sound Blaster Audigy Value = Problem

    I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
    Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
    Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
    Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
    I will be extremely thankful to you if you please provide a solution to these problems.
    Thank You........

    altho i tried this with audigy se u might wanna check this
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

  • Audigy Value, 24-bit + 96kHz suppo

    Hi, currently I am using Creative Audigy Value and Windows Vista Business. http://www.creative.com/products/pro...05&product=489As it said, it should support 24-bit / 96kHz. It work really well in Windows XP. However, no 96kHz option can be found in Windows Vista.
    The driver that I used is downloaded from Windows Update.(Ver. 5.2..200, release on 2/4/2007)
    Or ...should I update it via Creative web? Thanks~!
    Ben

    I reccomend using the ones from Creative's website, on my Audigy SE it allowed 96kHz capability.

Maybe you are looking for

  • How do I have the same "events" on two Macs?

    I have the "family pack" and just installed on both Macs. I have the same exact pictures on both Macs. I organized all the events on one Mac and now I would like to have the same events on the second Mac. On the previous version of iPhoto, I simply w

  • How to compare current date with past date

    Sample code for comparing current date with past date i dont want to Calender.set method to compare it. How can i do it?

  • Removing Blank Space (line) Accompanying Layout Breaks

    I've used a layout break to make a portion of text two-column after a one-column section. Whatever I do, whereever I put it, the layout break takes space. It's a farily tight document, in a 10pt. font, and the line the layout break takes screws up th

  • Unexpected parallelism in Oracle 11g

    Oracle documentation says that, when setting PARALLEL_DEGREE_POLICY to AUTO following things happen: 1.A SQL statement is issued. 2.The statement is parsed and the optimizer determines the execution plan. 3.The threshold limit specified by the PARALL

  • Email Event Read/View Access

    In our current setup in development tier we have access of add, edit, and delete to the email event. In production tier we do not have any those access. I was wondering if the email event can have view/read access so that we can see the email event.