Soundblaster Audigy 2 ZS Platinum and Acid Pr

Hello. I am using an Emachines with 3.3GHz Celeron and .5G RAM and Windows XP SP2. I am trying to record with Acid Pro 6 at 24bit and 44.khz (seems to work with the default audio device - Microsoft Sound Mapper or something like that) but I do not get the I/O options that I have with?the Audigy. I went to Options - Preferences then clicked on the Audio device tab and I tried to switch the audio device?to Soundblaster Audigy 2 ZS and I get a message saying that this device does not support that bitrate or sample rate. The only time it will let me switch to Soundblaster Audigy is if I first change to 24bit and 96khz. The problem with this rate is that?it consumes hard dri've space rapidly. Can the Audigy 2 ZS support a 24/44. rate? I am still trying all kinds of troubleshooting. I'm also researching on the Acid Pro forum for info. Any feedback will be appreciated. Thank you. Jeremiah

jmw wrote:
I went to Options - Preferences then clicked on the Audio device tab . . .
Edit:? I went to Options and Preferences in Acid Pro 6 to try changing the audio device type. Could I get a little reassurance that Audigy 2Z Platinum (Not the Movie Editor) supports 24/44. or 24/48?jmw

Similar Messages

SoundBlaster Audigy 2 Platinum Softw

Hey,
I just reinstalled my OS (WinXP SP2) and need to install the drivers & software for my SoundBlaster Audigy 2 Platinum card. I no longer have the cd and the drivers & software on Creatives' site is only upgrades... Anyone have an idea how I can go about installing the drivers and software without the CD?
Thx!

A couple of things.
There are websites out there with full drivers for hardware out there. Usually, they take the installer off of the manufacturer's website (with consent) and post it on theirs. If the manufacturer decides to discontinue download services for their drivers, these websites will still have the drivers on there. Do a Google search and find out. MAKE SURE, however, that you download Creative-signed drivers (otherwise, they're bootleg).
Or, you can go to a local hardware store (where you got the sound card) and ask them to tear open a box for you and install the software. If the store is like a Best Buy or Circuit City, they may have a copy of the driver sitting behind the desk at their customer support/computer service area. They will install it for you, but they may charge.
One final thing, check the Creative website again. They may actually have the driver on there, I tend not to look hard enough the first time, so I always double-check.

SoundBlaster Audigy 2 Platinum h

ok i installed my audigy 2 platinum with the expansion bay in the front i am using a fiberoptic cable to goto my Kenwood Dolby Digital & DTS reciever when i am on the desktop evthing is cool nice big sounds but when i run the set up i cant hear my rear center or sub also when i play call of duty united offensi've EAX is all screwed up all my drivers are up to date im going crazy here can anyone help?

ok cool that is what i wanted to hear but do u know why eax doesnt work on call of duty united offensi've? i just get a greyed out box in the sound options and when it is set to eax it sounds like it wants to work it will like be in surround for a split second then it sounds like it goes back to momo the only way i can get good sound is to put it to miles 2d audio any help with this one?

Soundblaster Audigy ZS 2 and teufel decoderstatio

I want to buy the teufel decoderstation 3 for my Surround-system Teufel Conzept E. I have the Soundblaster Audigy ZS 2. My Question: Does the Audigy 2 ZS work with the teufel decoderstation 3.
Here is the link for the decoderstation:
http://www.teufel.de/de/Multimedia/s_2.cfm
Here is the link for my Surround-System:
http://www.teufel.de/de/Multimedia/s_38.cfm
The Sites are in German.
thx.

It will work for DVDs or any other source which is pre-recorded in Dolby Digital/DTS. Games and stuff will work in stereo if you connect digitally via SPDIF ( coax/optical ).
I don't think it has 5. channel inputs. It appears to have a lot of stereo inputs for connecting different stereo souces as well as an optical and a coax input.

Soundblaster Audigy SE static and low volume problems...

Well, after failed attempts at getting my onboard ich5 chipset to work (which turned out to be Alsa 1.0.10 and 1.0.11 as 1.0.9 worked fine with it.) I decided to get a new soundcard. I purchased a Soundblaster Audigy SE.
The card is detected, there are no errors, and I can actually hear sounds coming from every application that plays audio. The only problem is, there's a loud static over these sounds which makes the sounds barely audible. Loud static, low sound. I've tried several different options in alsamixer but it doesn't help the static. By the way, the only options in alsamixer are for IEC. There are no "Master" or "PCM" sliders. (Not sure if this is what these cards do or not.)
Is there anyone out there that has this card and has been successful with it? I'm definitely having no luck with the sound thing lately. If anyone has any information or experiences with it, let me know please. I've googled around but really found nothing that helps as far adjustments and whatnot.
NOTE: I have read of success with this card in some other distributions.

maybe you can set it manually with amixer.
amixer -h
probably something like:
amixer sset Master on
amixer sset PCM on
and to increase the volume:
amixer sset Master 30
amixer sset PCM 30
but it prolly don't work... Have you checked out the links at the bottom of: http://wiki.archlinux.org/index.php/All … nd_at_once ?
Also i seem to be getting louder sound from the oss emulation kernel module for some reason... maybe you can up the audio in audacios or something for the oss sound and have it affect the whole system? that's just a shot in the dark..

Soundblaster Audigy 2 EX and Time coded Vi

Hi there,
I use a sb Audigy 2 EX and the program Virtual DJ 4 and two turntables with Time coded VInyl.
The first turntable is connected to the line in port and the second turntable to line in 3.
Line works fine but I don't get a signal on line 3..
Is there a difference between the line in ports? (I am not using the Microphone input).
What could I do wrong?
Thanks for your thoughts.

djshado wrote:
Yes the KX Drivers made my my audigy sound card into a dj station And i am very happy i have the save file for the settings so if ever someone actually needs or wants it they can msg and I will send it
If anyone else has tried to use Virtual DJ with the an Audigy Card and KX Drivers, can you guys tell me if u the the bpm is off by -8% all the time even when at 0. Any response will be apreciated.
Just a thought --> (44.1-48)/48 = -8.12% --> ...
jutapa
Message Edited by jutapa on 01-27-2006 07:28 AM

Audigy 1 Platinum and Prince of Persia:Warrior Wit

Ok, I have an Audigy Platinum. I recently updated to the latest drivers and everything. I usually don't like updating the drivers for this card, but i recently had to due to PowerDVD6 sound not working correctly in 5.. Well I fixed the PowerDVD6 problem, and now have a new problem. I recently installed Prince of Persia :Warrior Within, and once passed the UBI soft logo, the sound shuts off, and I'm left without sound. I also noticed that when I ALT-TAB back to the desktop, I go to my AUDIO HQ, and check the EAX Control panel, and its empty, no presets, or environments.. All I wanna know is, WHAT DO I DO?!!!!
I would hate to have to purchase a new Card, even I understand this is an older card..
Please Help!!:angry:

I have the same problem, is there some way to change the language settings?
Edit:: press the i (info button) then press twice the first button, you can choose languages by clicking the right flag
Message was edited by: Emiel187

Creative Audigy 1 Platinum and 2.1 Surround So

Ok, i have a Audigy Plat. so have the front dri've etc etc.... i also have the Creative i-trigue 3300 which is a 2. surround sound system....at the moment the way it works is that i connect the 2 speakers into the sub woofer and then the sub woofer into my sound card...thouhg this maybe a 2. system, in real terms the sound card doesnt treat it as a 2. system...
I was just wondering if i can connect like the sub to the digital/analog out of the card and the 2 speakers to the rear and line out of the card?
Reagrds

For 2. and 4., those 2 and 4 speaker settings are what the proper settings are called. Your speaker's sub will control what it sends to the satellites.
Don't worry, they just didn't change the labels. Most cards send the full signal out and most speakers take it from there.
5. is different as the card sends dedicated signals to all 6 speakers.

SoundBlaster Audigy Value: Delay and echoing of sound output from head

I'm having problems with the sound output of my voice when chatting using a headset.. I can hear echoes and there are delays occasionally. I first thought the problem was with the headset, and so I changed it. However, the problem persists!
When I plugged my headset in my laptop instead of the desktop with the Audigy Value installed, I didn't encounter any problems at all with the sound. So I thought the problem is with the Audigy Value souncard.
What could be causing these problems?

You need set the ASIO latency through CT ASIO panel and not through Audition settings. ASIO Panel has only settings as milliseconds so if you select 10 or lower value your delay problems should be fixed.
jutapa

Soundblaster Audigy 2 Value and Digital I/O Mod

I recently bought this card, and the shop I bought it at did not sell the Digital I/O Module. I was wondering if anyone knew somewhere in Australia where I could buy it.

Only place I've ever seen any of the bays sold is on Creatives UK online store and then its for an A2ZS so not sure it will work for you for basically 80 pounds with VAT. Here's a link for it http://uk.europe.creative.com/shop/product.asp?prod=588

SoundBlaster Audigy 2 Platinum eX card

My computer has been crashing for some time and I could not figure what was causing the problem. ?I ran a diagnostic test with Systems 9 Professional and during the "multimedia sequencer test" the computer crashed and then rebooted. ?During the second test, the sequencer was okay, however, the "wave audio test right speaker" froze up the computer and I had to hard boot. ?My speakers are the Klipsch with a sub-woofer. ?Any help at this time would be most appreciated.
Thanks,
JoeCool

I found your link BadBoy :-)
Thanks for the effort in putting all CD-ROMs in to ISO.
A bookmark for sure.
Creative should make it their duty to do this though.

Soundblaster Audigy and Ventri

I have a soundblaster Audigy SL? and use ventrillo for gaming. I tried headphones... I even physically unplugged my speakers from my soundcard and I still get game noise on vent? which of course dri'ves my friends crazy with the "feedback"? I have my connections plugged in accordingly? is there a setting somewhere i have missed?

I *think* you have WhatUHear as the record device. Open up the Creative Control Panel (volume) and the far right option with the word Rec as the heading may have WhatUHear under it. You can click a drop down arrow and chose Microphone. Also, in Control Panel go to Sounds and Audio Devices, Audio Tab and click volume for Sound Recording. Make sure the tick is in the Microphone column.

Audigy 2 Platinum random rebo

I got the Audigy 2 Platinum shortly after it was originally released. It worked for several months beautifully, then started randomly blue screening and making a terribly high-pitched noise before rebooting itself. I tried different pci slots and it kept doing it whether I was playing games or typing a paper.
Eventually, I built a new computer with a new motherboard and figured that would cure the problem. It didn't take long before the reboots started. This time I assumed it was actually the card to blame. I found a replacment platinum card on Creative's Ebay Store and installed it only to still suffer from the same problem.
I have the latest drivers and latest software via this site's support links.
If anybody could share any light on this matter, I'd deeply appreciate it as my onboard sound is nothing compared to the brilliance of the Audigy 2 Platinum.
My system in a nutshell:
MSI Neo4-F
AMD 64 3000+
Connect3d X800XL PCI-E
Soundblaster Audigy 2 Platinum
2 x 200GB SATA HD
024MB OCZ Platinum Revision 2 (2-2-2-5)
Also, I've disabled onboard sound but the problem still occurs.Message Edited by gillbell on 2-3-2005 0:6 PM

Please move your thread here: http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39573
Are you using Ventrillo or TeamSpeak?
Describe the stuff you are doing when this happends...

New Mic + New Audigy 2 Platinum = Lots of Background No

I just purchased a new microphone and the Creative SoundBlaster Audigy 2 Platinum. I linked the microphone I'm using below. I have installed all of the drivers for the Audigy card and noticed when I am trying to record voice, I hear a substantial amount of background noise even in a completely silent room. I have included a link to a test mp3 and wav below where you can hear what the mic sounds like. I have the mic plugged into the back of the soundcard.
I have also attempted to move the microphone closer to my mouth, farther away, facing different positions, etc... Nothing really seems to work. It also sounds a bit quiet even with the volume turned all the way up.
Microphone:
http://www.audiocubes.com/product/Au...icrophone.html
Microphone Configuration:
http://student.dpg.devry.edu/~d00754...figuration.gif
Sample audio file using windows sound recorder:
http://student.dpg.devry.edu/~d00754524/example.wav
Sample audio file using Creative Mediasource Player:
http://student.dpg.devry.edu/~d00754524/example.mp3
Thanks in advance for the help.Message Edited by icroyal on 2-2-2005 08:30 PM

Anyone?

Neo4-F + Audigy 2 Platinum issue

Hi all!
I've had an audigy 2 platinum sitting around my house since it originally came out. I never installed it on my new board because I was lazy, and impressed with the onboard sound. I'm a musician and gamer and it is time to get that crisp sound back.
I installed the card and about 20 minutes later, my computer blue screened and made a horribly high pitched noise until it rebooted itself. After rebooting, the frequency of these reboots increased. I turned off onboard audio and switched pci-slots, neither solved the problem. I figured the card was static-shocked or simply dying, and I bought a replacment. The replacment does the exact same thing!
Now that I'm on my second card, I leaning towards a compatibility issue with the motherboard. My computer runs oh so sweet until an audigy is placed in it.
The blue screen refers to something like "IRQL_LESS_THAN_OR_NOT_EQUAL." That may not be exactly it, but I think its close.
I've live-updated the board and have the latest BIOS. No overclocking.
My machine in a nutshell.
MSI Neo4-F
AMD 64 3000+
Connect3d X800XL PCI-E
Soundblaster Audigy 2 Platinum
2 x 200GB SATA HD
1024MB OCZ Platinum Revision 2 (2-2-2-5)

Hi,
Post your computer's complete PSU (Power Supply Unit) specifications. These can be found on a label in the PSU itself.
Also, please make a signature with your complete computer specifications on it, including floppy, optical drive(s), hard drive(s),
graphic card(s), RAM manufacturer and ammount, and any other add-on card installed.
For more info, click here.
Once this is done, I'm sure the folks here will be more than happy to help.
Be well

Soundblaster Audigy 2 ZS Platinum and Acid Pr

Similar Messages

Maybe you are looking for