Soundblaster Audigy 2NX External Sound Card Fidelity Degradat

I get a muted, out of phase, tinny sound along with the music being played; sounds ok for a while then this happens regurlarly. Closing player & reopening stops the problem temporarily but recurs. I've uinstalled/reinstalled software & updated as well. Any suggestions?Message Edited by Vince8 on 0-22-2005 09:50 PM

You should insist to have the installation CD. There are several essential software in the CD which may not be avaibale for download. Alternati'vely, you may want to contact Creative technical support to get/buy the CD.

Similar Messages

Is the 'Creative Sound Blaster X-Fi 5.1 Pro' external sound card compatible with OS X Mavericks?

If not, could you recommend any decent external sound card with a 3 jack connection for analog 5.1 PC surround speakers that is?
Thanks in advance

Ostbulle you unnistall first Creative Audio console?
http://lh4.google.es/rmorinr/RqYKLZ7cvgI/AAAAAAAAAfA/ptuslMM0CQg/s44/audioConsole2.JPG">
Try Sound Blaster X-Fi Audigy Beta Driver 200707:
http://?connect. creativelabs.com/?beta/default.aspx
Message Edited by Rad-Wulf on 07-24-200703:23 PM

5.1 or 7.1 external sound card

I have a new iMac but it only has a 2.1 optical audio output on the back. I'd like to connect a 5.1 DD external sound card USB 2.0 (maybe even up to 7.1 Dolby Digital) to it to connect to my DD receiver. However, I am also using Windows Vista Ultimate through Boot Camp separately and may add VMWare Fusion later on to run both OSX and Vista side by side so I'd want to have both of them compatible and even before that. I've been looking for cards but haven't found any that are supported by both Apple AND PC. Either that or they are all internal PC cards. Does anyone know of any external cards that are supported by both?

Tiery wrote:
My iMac has a combination 1/8" optical/analog output jack on the back of it that
you can use for either connection but I've never heard of such a "combo" jack.
There are two "standard" optical-digital-audio connectors. The original "square"
one is still used in most larger audio/video components. The newer/smaller one,
used mainly in portable gear, is exactly the same size as a mini headphone plug.
The iMac's 'combo' jacks support either analog or digital-optical connections --
depending on which type of plug is inserted.
Radio Shack carries adaptors/cables of both types (usually at outrageously high
prices). For online vendors, try http://monoprice.com Great prices and a good
reputation for quality/service among the HDTV-fanatics on avsforum.com.
Here are just two examples; browse monoprice.com for many more:
[optical mini-plug to toslink adaptor|http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042301&pid=2671&seq=1&format=2]
[optical mini-plug to toslink cable|http://www.monoprice.com/products/product.asp?cid=102&cp_id=10229&cs_id=1022902&pid=1557&seq=1&format=2]
I thought the only way I could get DD 5.1 out is through a USB adaptor.
That should work, too -- but I don't believe it's necessary.
Looby

Suggestions on 5.1 external sound card

Hello to all and Happy New Year! Hope everyone had fun and were kept safe.
I am in need of a 5.1 external sound card for my PB. Any suggestions, opinions, or actual experience with such would be greatly appreciated. Thanks, Quick

Hello to all and Happy New Year! Hope everyone had
fun and were kept safe.
I am in need of a 5.1 external sound card for my
PB. Any suggestions, opinions, or actual experience
with such would be greatly appreciated. Thanks, Quick
Check out http://www.audiomidi.com/Sonica-Theater-P3436.aspx?CPID=392&AFID=3
And for a review: http://www.insidemacgames.com/reviews/view.php?ID=422
M-Audio also makes the Transit: http://www.m-audio.com/products/en_us/Transit-main.html
Hope that helps. I don't have personal experience with these, but have been looking into solutions to connect my Mini to my sound system.
MDD Dual 1.25 G4 Mac OS X (10.4.3) Mac Mini, G4 Powerbook

Surround sound via external sound card

I'm looking to connect my W520 to a tv for watching movies. The video is all set up with a DP to HDMI adapter directly from the laptop to the tv. The sound, however, must pass through a receiver first. The receiver only has RCA inputs - it's quite old. I know the hypothetical setup would definitely work because I have a cable tv set top box connected that way.
What's missing is an external sound card that is:
- compatible with the w520
- capable of outputting 5.1 surround sound
- capable of connecting via RCA, be it through an adapter or not
Can anyone recommend a reliable external sound card for the job?

Have you tried one of these?
dynadock PA3927U-1PRP dynadock U3.0
You can stream 5.1 audio (and the video for that matter as it supports two displays). It also supports USB3.0 as an added perk (the dock itself can be plugged into a usb 3.0 port for best performance). It has one HDMI connection, one DVI-I, and an ethernet connection builtin as well as the usb connections.
PS Missed the bit about you only having RCA connections on your receiver. Lol I would get a new receiver. But then again this device may help you as it does have analog outputs (front,rear and c/sub). You would need to build/find cables though (3.5mm x3 to RCAs).
Btw no SPDIF? If no your receiver must be a pretty old one. Hope its a good one ;-). If you have an coax/optical input then there are also USB devices that will provide 5.1 (maybe even 7.1 nowadays) via the SPDIF connection.

External Sound Card Problems

I've been enjoying my HP dv7-1025nr for the past few months with no problems. I recently decided to get into home audio recording and purchased an M-audio profire 2626 external sound card which connects through firewire. I've yet to get any sound from my computer through the device. I have downloaded and installed all the latest drivers several times (both for the profire and every other device on my computer). I've also updated the flash bios for my hp (which i'm still trying to figure out why there's no "advanced" tab in the menu...other users have resolved irq issues this way and it's not even an option for me). I have reinstalled my OS (several times). The M-audio tech support suggested purchasing a dedicated firewire card with a TI chipset to solve previous connectivity issues, so I got a Siig 2-port ExpressCard. My current problem is that even with the profire set as my default playback device, there seems to be a problem where windows is unable to send it any sounds. If I try to use itunes or windows media player, the timer won't even start when i press play. Everything works perfectly when i change the windows default playback device to anything else (laptop speakers, spdif out or nvidia hdmi out). I'm confident that everything on the profire's end is working correctly and there must be some form of harware or software conflict (windows services or otherwise). Device manager doesn't show and irq conflicts but i'm wondering if there could still be one. Windows is recognizing the device and the m-audio control utility is working. The profire also works perfectly through my other computer (a gateway laptop running xp). I have spent 2 weeks trouble shooting this problem and have come to the conclusion it cannot be fixed through normal trobleshooting means. I need a programmer to help me out with this one. Please help.

model external sound kard is e-mu 0404. it is unkhnown for may hp laptab

External sound card

Hi,
I'm looking for an external sound card for my 24" 2.4 GHz iMac either USB or FW. I don't need surround sound, but I do need good Vista driver support for gaming. The drivers for the onboard Realtek sound card produce a lot of cracking noises and pauses with Vista.
Any ideas? (Mind that I don't just want an external interface for the onboard sound card, but an external sound card)
Thanks.

mani wrote:
How do you call a device that splits the earphone and mic contacts
so I can use the mic with my iMac?
I'd call it an "adapter," but those of the UK persuasion would
prolly call it an "adaptor." Either way, I have no idea where
to get one for (yet another) weird Apple-proprietary connector.
Be aware that the iMac's "line input" isn't sensitive enough
for most microphones. You will probably need a mic preamp if
you want to use the Etymotic's microphone with the iMac.
The Creative XMOD has a "LineIn/MicIn" jack, but (as usual)
Creative's specs tell you next to nothing -- maybe it would
work with the Etymotic's mic output ...maybe NOT.
good luck,
Looby

Compatible external sound card needed for mac mini...

I need an external sound card for a mac mini. does anyone know which ones are compatible?

My experience is with consumer-level devices, not "pro" gear. If I'm understanding correctly, you want to use the built-in sound output jack on the Mac mini with headphones, to monitor ("preview music"), while you use USB to output sound to a "mixer board."
I used a USB device a while back called PowerWave (from Griffin Tech). I could output sound to it, and it acted as an amp to power standard "living room" (not self-powered) speakers. It also had a mini-stereo jack on it, like the one on Mac mini, which could be used with headphones at the same time (I put a self-powered subwoofer on that output). And it also had sound input. It was very cool.
I also used a FireWire device called FireWave (also from Griffin Tech). But that was more of a way to add 5.1 surround sound output to a Mac.
There is a current USB device from Griffin Tech called iMic.
http://store.griffintechnology.com/desktop/imic (says "out of stock")
http://www.amazon.com/Griffin-7725-IUAI-iMic-Audio-Interface/dp/B003Y5D776/ref=s r_1_2?ie=UTF8&qid=1339226388&sr=8-2
It's sort of a cheaper version of that old PowerWave, with a more limited set of features (no amp). It does provide audio output (and input) from a USB port, and it's relatively inexpensive. But, I'm not sure if you can send sound output to TWO devices at the same time, using standard system settings (if that's important for what you're doing).
I also found out about this recently
http://cycling74.com/products/soundflower/
which might be useful for what you are doing...

Ipad sound to external sound card.

hi .. i have an ipad 2 and i am wondering if i can use an external sound card .that will get and input (usb) from the ipad via using the dock cable ( white ipad cable).
what i mean to say is .. i want to use this ipad as a player and the sound goes to an external professional sound card and from the sound card the output ( rca/ xlr or trs) to a mixer/amplifier .
thanks
mack macky .

Looked into that. May work for your problem but not with the Jam. I contacted dockStubbs and they are aware of the problem and supposedly working on a fix. I have searched high and low for an answer and cannot find one. Here is a tech support request I sent Apogee today.....
"Trying to figure out how to charge ipod while using the JAM. Love the interface but need to figure out a way to charge while playing. Split apogee cord open and tapped in a usb cord to the black and red wires. That powers up the jam but no charging power to ipod. There is an extra blue wire in cable, don't know what it is for. I have not attemted tapping into the green and white wires. I know the ipods, iphones,ect require the data wires be tied to +5v and -5v with some simple resistors in order to get 2.8v and 2v on data wires to initiate a charge but I am fearful that if I do that it will roast the JAM. I think the blue wire has something to do with providing some sort of power but not sure what. Also noticed that there is no blue wire in the USB to JAM cable. Any insight would be much appreciated!
Thank you, "
Curious as to what kind of response I'll get.
Here is some info links for the 30 pin connectors for any DIY'ers
http://pinouts.ru/PortableDevices/ipod_pinout.shtml
http://irq5.io/2012/06/25/the-apple-30-pin-dock-connector/

Yamaha trigger box to external sound card

i've got a yamaha dtxpress IV and i need to record from a mac.
i am currently trying to find out which card should do the trick while being compatible to cubasis/asio.
the yamaha trigger box has a midi out, headphones and mic available...
i already have a cable from midi-out to usb...but i do not know if this will really do.
so what i really want to know is if there's an available external sound card from creative that could connect to a midi-out and be compatible to cubasis/asio at the same time.
ps:i have no clue whatsoever if this is something simple or not!!
Cheers

Hi again,
I just found a link on M-Audio's website (forum) that says the Fast Track Pro does not support sleep mode, and that I should set my computer to never go to sleep. *****, a little, but I guess it's not a huge deal. And, ultimately, what matters is the sound quality that I get. And, that is quite good!
In the meantime, your point about an external power supply (besides the USB power) is interesting, and a really good point. I wonder if I powered the interface with the optional external power supply, would that alleviate the problem (since the power to the M-Audio box would be continuous). I may, one day, order the optional power supply and check it out. In the meantime, I will simply set my computer to never go to sleep.
I do have a question in this regard, though: Is "going to sleep" the same issue as "screensaver". I ask this because I've figured out how to set the screensaver to "never", but I don't see anything about "sleep" mode. Is this the same thing? If not, how do I access the "sleep mode" settings?
Thanks again!
Vic

ITunes only through external sound card

Hi,
I've recently bought a Focusrite Liquid Saffire 56 and am really enjoying it. When i'm not using it for recording, I keep it connected to my speakers as it gives a better output than that of the 3.5mm headphone jack (for an aux in to my speakers).
I was just wondering if there was any way that i could get ONLY iTunes out of the external sound card so that all my sounds from other apps like Mail and Safari etc. would come through my Macbook Pro's speakers? I just don't like it when I get the big air rush sound coming through my speakers when an email is sent using Mail, and then other little bleeps from everything else are quite annoying too.
Thanks in advance
mr meister

Open the "Sound" "System Preference"
Select the "Sound effects" tab. Tell it to play sound effects
through Internal Speakers.

AUDIO QUESTION: Running external sound card plus internal sound a once

Hello,
I have a question about the possibility of operating an external sound card (Line 6 tone port UX1) and operating internal audio at the same time. In system preferences, it just lets me have one or the other.
Is there a workaround or program that would allow me to do this.
It is necessary because I need a cueing output and a master output for djing with my m-audio xsession pro.
Any suggestions would be great.
Thanks,
Lynx

model external sound kard is e-mu 0404. it is unkhnown for may hp laptab

Which external sound card with optical out is compatible for macbook

hello guys!i got a macbook model 2011 and i want to connect with my speakers which is logitech z5500 with an optical cable!Of course i have read a lot of answers in various forums that told me about the optical out of mac which is the headphones out too!but this doesnt give me real surround 5.1 and i want something more specific such as an external sound card to give me the real sound!i prefered Creative Xfi pro but i have also read that iOSX doesnt recognize the soundcard or have various problems!
please help me !!!!

No Creative sound cards are fully compatible with Vista at this time. Nobody really knows if or when there will be fully working, stable drivers from Creative that work with Vista. If you really need sound, the only fully working cards are from C-media I believe. My on-board C-media sound chip works perfectly with Vista.

External Sound Cards for Captivate

can someone suggest a couple of external sound cards with
plug jacks for microphone that work well with captivate?

Hi samarui,
"Creative Labs" has always built a decent sound card, as does
"M-Audio" and "Yamaha". Some Captivate users have reported
difficulties with USB audio cards, so if that's your pleasure,
trial and error might be the order of the day.
If you are using a PCI slot card for an internal
installation, note that caution should be taken to avoid conflicts
with audio built into the motherboard - though this may not be
necessary (or applicable) since your interest seems to be with
external, not internal cards...
In any case, good luck!
.

Audigy 4 pro sound card HELL please advise!!!

hi all,
right i'll TRY to keep it simple!.....
BEFORE my (recently brand new) hard dri've died and caused me all sorts of probs (and ?300) my soundcard was fine it was :
windows 7
audigy 4
cubase 4
daniel k's drivers (i think OR it was the one that came with the card)
with this i HAD the option of acti've X driver OR creative asio (used this as was much much better)
SINCE it died i've tried everything for days and days of hell to get this driver on, heres the symptoms:
using the CD that came with the audigy it takes 45 mins to load and then tells me there is NO sound card fitted (tried this 3 or 4 times)..
i physically took t?he card out (twice) and it made no difference and still didnt recognise any card fitted.
i've had to system restore a few times to get it 'see' ANY driver.....i've also downloaded some drivers but same symptoms as above.
using the acti've x the latency is a prob though i have adjusted it to make it work BUT am thinking this is one of the reasons my cubase freezes / crashes / and now makes crackling noise especially when using a reverb vst.
the whole system was great B4 this and i've lost 3 or 4 days and am now at the throwing it out of the window phase.
BEFORE it handled superior drummer as a VST and midi / audio files + reverbs all at the same time NO problem.
the current set up is almost identical and in fact a tickle better than B4 so WHY wont it see a sound card ?when trying a different dirver?
HELP! Si in Brighton.

ta...yes it does.
works (almost) fine with the acti've X driver, apart from telling me line/mic is NOT available....spent all day (again) trying to get the 3.8 daniel K pack on there.....came back with 'somethings wrong' meessage each time.
it just baffles me that my hard dri've
cd rom AND now (maybe) the card all ferk up at exactly the same time!
i recorded afterwards and it was fine for hours.....
cheers si

Soundblaster Audigy 2NX External Sound Card Fidelity Degradat

Similar Messages

Maybe you are looking for