Soundblaster Audigy and Ventri

I have a soundblaster Audigy SL? and use ventrillo for gaming. I tried headphones... I even physically unplugged my speakers from my soundcard and I still get game noise on vent? which of course dri'ves my friends crazy with the "feedback"? I have my connections plugged in accordingly? is there a setting somewhere i have missed?

I *think* you have WhatUHear as the record device. Open up the Creative Control Panel (volume) and the far right option with the word Rec as the heading may have WhatUHear under it. You can click a drop down arrow and chose Microphone. Also, in Control Panel go to Sounds and Audio Devices, Audio Tab and click volume for Sound Recording. Make sure the tick is in the Microphone column.

Similar Messages

Soundblaster Audigy and Windows

I've just installed Windows XP on a new hard dri've. I'm running an older computer with a 700mhz Celeron processor with an Audigy soundcard. On Windows ME it worked fine, but since upgrading, sounds work fine, but when I try playing music of any kind it locks my machine up so bad I have to shut it down manually. I've tried reinstalling Windows and the soundcard drivers, and nothing works. Is there a known issue with the Audigy and Windows XP?
I'm greatful for anything you can tell me, I'm at a loss.
Thank you

Why bother with Microsoft?
They didn't even add in 6. in Windows XP
Seriously, use Creative Speaker Settings.

Soundblaster Audigy 2 ZS Platinum and Acid Pr

Hello. I am using an Emachines with 3.3GHz Celeron and .5G RAM and Windows XP SP2. I am trying to record with Acid Pro 6 at 24bit and 44.khz (seems to work with the default audio device - Microsoft Sound Mapper or something like that) but I do not get the I/O options that I have with?the Audigy. I went to Options - Preferences then clicked on the Audio device tab and I tried to switch the audio device?to Soundblaster Audigy 2 ZS and I get a message saying that this device does not support that bitrate or sample rate. The only time it will let me switch to Soundblaster Audigy is if I first change to 24bit and 96khz. The problem with this rate is that?it consumes hard dri've space rapidly. Can the Audigy 2 ZS support a 24/44. rate? I am still trying all kinds of troubleshooting. I'm also researching on the Acid Pro forum for info. Any feedback will be appreciated. Thank you. Jeremiah

jmw wrote:
I went to Options - Preferences then clicked on the Audio device tab . . .
Edit:? I went to Options and Preferences in Acid Pro 6 to try changing the audio device type. Could I get a little reassurance that Audigy 2Z Platinum (Not the Movie Editor) supports 24/44. or 24/48?jmw

Soundblaster Audigy ZS 2 and teufel decoderstatio

I want to buy the teufel decoderstation 3 for my Surround-system Teufel Conzept E. I have the Soundblaster Audigy ZS 2. My Question: Does the Audigy 2 ZS work with the teufel decoderstation 3.
Here is the link for the decoderstation:
http://www.teufel.de/de/Multimedia/s_2.cfm
Here is the link for my Surround-System:
http://www.teufel.de/de/Multimedia/s_38.cfm
The Sites are in German.
thx.

It will work for DVDs or any other source which is pre-recorded in Dolby Digital/DTS. Games and stuff will work in stereo if you connect digitally via SPDIF ( coax/optical ).
I don't think it has 5. channel inputs. It appears to have a lot of stereo inputs for connecting different stereo souces as well as an optical and a coax input.

Logic 5.5 and Soundblaster Audigy 2 NX

Hi,
Apologies if I ask some realy dumb questions, but I'm a complete novice in terms of this sort of thing.
I have Logic 5.5 for my PC and have bought the Soundblaster Audigy 2 NX to use with the program so that I can record guitars, bass, and vocals for my band. I have gone through the process of installation via the CD supplied with the sound card, but Logic will not allow me to do any recording. I am reliably informed that this is to do with the fact that I don't have any ASIO drivers (not really sure what that means though!).
Is there somewhere that I can download (preferably for free!) the necessary drivers to make the program work, or is the product unlikely to work at all?
Any help is appreciated.
Cheers,

Maybe Asio4all - http://www.asio4all.com
jutapa

Creative L3500 Speaker system and Soundblaster Audigy 2 ZS Soundcard (I have a driver probl

Yes I have had a driver problem so i went to the download section of this site and picked up a driver program for my soundcard yet it doesn't work. When i do uninstall my soundcard (i need to uninstall current driver to install new driver)and i restart my comp after removing the old one i get sound, but i notice i don't get very good sound, not as good as my old before it stoped working. But then after i install new one it just doesn't work!
Please help me if you know about drivers!!!!
PS: I use windows XP and if you need any more info just request it from me.Message Edited by Nick345 on 02-28-200605:05 PM

JRe: Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs0 I'm afriad that the CMSS3D option did not work? ? I still cannot get any speakers to play out of the rear of the soundcard.
As I said before, the goal is to try to get sound to play out of both the headset and the speakers attached to the rear of the soundcard simuntaneously.
The headset is plugged into one of those devices in the front that is in a 5 & /4" bay that has the individual knobs for adjusting volume for the headset and outbound levels for the microphone.
The speakers are plugged into the back of the soundcard and do not play any sound in any of the sockets, starting from the firewire port and counting 3 over.
Any suggestions? I? thought it might have something to do with the setting of the speakers from control panel - > Sounds and Audio Devices -> Advanced and picking the right choice there. No luck however. Same for the Creative Speaker Settings as well.
I'm at wits end and I'd be very thankful to whoever can resolve this for me. =)

Soundblaster Audigy SE static and low volume problems...

Well, after failed attempts at getting my onboard ich5 chipset to work (which turned out to be Alsa 1.0.10 and 1.0.11 as 1.0.9 worked fine with it.) I decided to get a new soundcard. I purchased a Soundblaster Audigy SE.
The card is detected, there are no errors, and I can actually hear sounds coming from every application that plays audio. The only problem is, there's a loud static over these sounds which makes the sounds barely audible. Loud static, low sound. I've tried several different options in alsamixer but it doesn't help the static. By the way, the only options in alsamixer are for IEC. There are no "Master" or "PCM" sliders. (Not sure if this is what these cards do or not.)
Is there anyone out there that has this card and has been successful with it? I'm definitely having no luck with the sound thing lately. If anyone has any information or experiences with it, let me know please. I've googled around but really found nothing that helps as far adjustments and whatnot.
NOTE: I have read of success with this card in some other distributions.

maybe you can set it manually with amixer.
amixer -h
probably something like:
amixer sset Master on
amixer sset PCM on
and to increase the volume:
amixer sset Master 30
amixer sset PCM 30
but it prolly don't work... Have you checked out the links at the bottom of: http://wiki.archlinux.org/index.php/All … nd_at_once ?
Also i seem to be getting louder sound from the oss emulation kernel module for some reason... maybe you can up the audio in audacios or something for the oss sound and have it affect the whole system? that's just a shot in the dark..

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

Connecting Soundblaster Audigy 2zs to Home Theater Amplif

Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..

I am in the same situation as you. As the CL told me
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound.

Dual Soundblaster Audigy Inst

Oddly, this is not going well at all. Some history first.
I'm sure many would question the why's. I've seen other people post that they want to use two soundcards and everyone says why.
I play alot of video games, and use voice chat. I'd like to hear game sound from my 5. sound system, and hear voice chat in a headset.
I used to use two computers to accomplish this, but recently, my spare had a harddri've problem and went down. So i went to a local vendor and got a Soundblaster Audigy SE about 2 days ago. Testing with that and my onboard sound has been abysmal. Usually within a couple minutes, the setup will interact unfavorably with a videogame. With a game (eve-online or FFXI Online) running on one card (doesn't matter which) and Teamspeak/roger wilco/ventrilo running on the other, the game tends to get buggered up (popping sounds, then eventually the graphics either get very messed up, like the game losing track of where my character is). If i only use one app on one card, or both apps on one card, no issues.
So, last night i went and bought another SB Audigy SE, thinking that perhaps there was a clocking issue with the on board card. Maybe, maybe not, as right now, as soon as windows attempts to bring both cards online during an acti've session of windows, it crashes/reboots immediately. If both cards are started during startup, the machine throws a Kmode exception 0xe bluescreen and hangs. I did disable the onboard card before attempting any of this, and reset the ESCD via bios.
I attempted to uninstall the drivers and install both cards simultaneously by doing a fresh install, this just results in the Kmode blue screen. In safe mode, with both cards acti've, if i change the settings on one card, the settings on the other card change as well. I had read on the internet (various google results) that sometimes installing two of the exact same card will result in your system thinking both cards are the same card.
So, i'm looking for a solid "I've seen/done this and you can fix it by:..." sort of answer, but any musings would be helpful too.

I *think* you have WhatUHear as the record device. Open up the Creative Control Panel (volume) and the far right option with the word Rec as the heading may have WhatUHear under it. You can click a drop down arrow and chose Microphone. Also, in Control Panel go to Sounds and Audio Devices, Audio Tab and click volume for Sound Recording. Make sure the tick is in the Microphone column.

Audigy and BA75

I am trying to use Boston Acoustic BA7500G digital speakers with my SoundBlaster Audigy card. I can't get any sound out of them, but the device is working properly. Has anyone tried this combo before?

And here is the link to the Intel site for the PINOUTS for your front panel jacks.......
You can find AC97 and INTEL HD Audio or Azalia
http://www.intel.com/support/motherb...sb/CS-0585.htm
Lastly since Creative does not make an adapter for everyone's front panel jacks...... These guys do. I received mine in about four days, and the cable is sturdy.
www.x-tap.com

Audigy and ddts-

After i opened the box today and hooked up the ddts to my promedia 5. ultras....i was very happy. I am running my ps2 into it with a toslink, and it sounds great. I have a audigy regular (mp3 or gamer), and the only setup I can get to work with it is with the digital coax and the converter to /8, HOWEVER, when using the digital coax i do NOT have the option of anything but stereo! I got the ddts mainly for up-mixing my mp3s. Can you get anything else (ie prologic, or neo6? is there a better way to hook them up? I tried using an old cable i had laying around from an old minidisk player that has one side /8th and the other toslink, however I'm not sure if it even works correctly in this application. I tried hooking up from the audigy to the ddts with a /8th to rca, and could not get any sound, except for some buzzing in the center channel. I also recieved today my creative audigy 2 zs notebook, however my dell inspiron 9200 wont get here for a few days . Will I have similiar problems with this? If it turns out my toslink to /8th cable is faulty my plan was to go buy a toslink cable and the /8th converter and use it that way. Will that work properly with my new notebook and/or my current desktop? My goal was to have all three components (ps2, notebook, desktop) hooked up digitally (I love anything and everything 5., including my mp3s). Should I be having this problem with my audigy and the digital coax? Should the /8th to rca work?
Thanks a lot,
Mike

Analog output on the soundcard --> DDTS-100 switchbox
Switchbox --> DDTS-100 main unit
Switchbox --> Speakers
Digital out on the soundcard --> Coaxial input on the DDTS-100 main unit
The digital output on the soundblaster can ONLY SEND OUT EITHER A PCM STEREO SIGNAL OR AN ENCODED DATA STREAM (AC-3). In order to make the DDTS-100 decode the data stream correctly you MUST have the software set to SPDIF passthrough and also have that set in the Audio HQ or the Audio console. Put the switchbox to decoder mode. The only way to light up the lights of the DTS and Dolby Digital is to feed the main unit with an encoded data stream of those sound formats. If you try to play anything and put it through the digital out that is not DTS or DD you are going to get... Stereo.
In order to get sound from the side speakers you must first set the switch on the back of the DDTS-100 main unit to 6.1/7.1 and set the upmix to 5.1-->7.1 or 6.1-->7.1 (depending on the source) on the main volume controller of the S750.
Message Edited by rico01 on 08-17-2005 09:38 PM

Conflict between audigy and Olympus voice recor

I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)

Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

Can not install driver for Creative Soundblaster Audigy 2

Hello
I excuse myself for my unworthy english.
I disabled motherboard audio in Bios before installation and before putting soundcard in
It says that i can not find any soundcard
but when i search for audio? drivers in thedevice manager(correct word for it's)
it copies some files and audio works
the sound card is listed in dxdiag but in games i have bad performance
My system:
Windows XP Professional(directly after installing windows i installed SP2 then SP3)
Direct X 9.0c
Intel Pentium 4? 3 Gh
Gigabyte GA-8G000MK
2 GB DDR ram
?Nvidia 6200 256 MB
Soundblaster Audigy 2 ZS
My system is completely new.
Directly after installing windows(on formated partition)
i installed SP2 then SP3
then i installed Motherboard drivers
then i installed graphic drivers
then i installed antivirus drivers
then i installed wireless lan drivers
then i tried to install audigy 2 ZS drivers.i tried from CD and newest.Both didnt work
i disabled antivirus before installation attempt
i would be happy about help
Only one cable is used from CD-rom to soundcard:? CD-in
no other cable..buti was able to install long ago
Message Edited by ignaz on 08-2-2008 09:27 AMMessage Edited by ignaz on 08-2-2008 0:36 AM

Your welcome try my pax drivers that might slove your issue

PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

Problem:
I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2.
When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I have no problem, but when I install version .0.4.077 (in this example: or I install version 055 or I install version 077), I have the following problem: (through Control Panel) in system properties/hardware/device manager, I find PCI Device listed in " other devices " with a black exclamationmark in a yellow circle, while the SB Audigy LS is listed in the group " sound, video and game controllers ". The soundcard works, which is great but why is the exclamationmark showing? I already tried a different PCI slot, IRQ assignement in BIOS, but is still shows. The strange thing is, if I install first version 055 and then version 077, the problem is gone. A new problem that occurs if I do so, is that the PC hangs when starting Windows (but I'm not sure if that has to do with the fact that I install version MediaSource 5 Player-Organizer 5.20.23 over version 5.0.38, just to keep the MediaSourceGo! Toolbar (because it's no longer part of the softwarebundle version 20.23 - which has been confirmed by the support of Creative), the same with version of CD Burner Plugin 5.0.44 over 5.0.3 because it's not really clear on the website, if you need the previous version or if it's a full "update"). Please URGENT (with detailed info on every explained problem/issue - so I can try to resolve it) help.
Thanx,
Oli4
Message Edited by Alejandrootje on 0-02-2008 09:55 PMMessage Edited by Alejandrootje on 0-02-2008 09:56 PMMessage Edited by Alejandrootje on 0-03-2008 0:38 PMMessage Edited by Alejandrootje on 0-06-2008 02:9 AM

maybe you should ask Eugene Gavrilov (?) to write his KX-Drivers for MSDOS too.. maybe he'll do so if you donate him an Audigy 4 *lol*

Soundblaster Audigy and Ventri

Similar Messages

Maybe you are looking for