Soundblaster Audigy ZS 2 and teufel decoderstatio

I want to buy the teufel decoderstation 3 for my Surround-system Teufel Conzept E. I have the Soundblaster Audigy ZS 2. My Question: Does the Audigy 2 ZS work with the teufel decoderstation 3.
Here is the link for the decoderstation:
http://www.teufel.de/de/Multimedia/s_2.cfm
Here is the link for my Surround-System:
http://www.teufel.de/de/Multimedia/s_38.cfm
The Sites are in German.
thx.

It will work for DVDs or any other source which is pre-recorded in Dolby Digital/DTS. Games and stuff will work in stereo if you connect digitally via SPDIF ( coax/optical ).
I don't think it has 5. channel inputs. It appears to have a lot of stereo inputs for connecting different stereo souces as well as an optical and a coax input.

Similar Messages

  • Soundblaster Audigy SE static and low volume problems...

    Well, after failed attempts at getting my onboard ich5 chipset to work (which turned out to be Alsa 1.0.10 and 1.0.11 as 1.0.9 worked fine with it.) I decided to get a new soundcard. I purchased a Soundblaster Audigy SE.
    The card is detected, there are no errors, and I can actually hear sounds coming from every application that plays audio. The only problem is, there's a loud static over these sounds which makes the sounds barely audible. Loud static, low sound. I've tried several different options in alsamixer but it doesn't help the static. By the way, the only options in alsamixer are for IEC. There are no "Master" or "PCM" sliders. (Not sure if this is what these cards do or not.)
    Is there anyone out there that has this card and has been successful with it? I'm definitely having no luck with the sound thing lately. If anyone has any information or experiences with it, let me know please. I've googled around but really found nothing that helps as far adjustments and whatnot.
    NOTE: I have read of success with this card in some other distributions.

    maybe you can set it manually with amixer.
    amixer -h
    probably something like:
    amixer sset Master on
    amixer sset PCM on
    and to increase the volume:
    amixer sset Master 30
    amixer sset PCM 30
    but it prolly don't work... Have you checked out the links at the bottom of: http://wiki.archlinux.org/index.php/All … nd_at_once ?
    Also i seem to be getting louder sound from the oss emulation kernel module for some reason... maybe you can up the audio in audacios or something for the oss sound and have it affect the whole system? that's just a shot in the dark..

  • Soundblaster Audigy 2 EX and Time coded Vi

    Hi there,
    I use a sb Audigy 2 EX and the program Virtual DJ 4 and two turntables with Time coded VInyl.
    The first turntable is connected to the line in port and the second turntable to line in 3.
    Line works fine but I don't get a signal on line 3..
    Is there a difference between the line in ports? (I am not using the Microphone input).
    What could I do wrong?
    Thanks for your thoughts.

    djshado wrote:
    Yes the KX Drivers made my my audigy sound card into a dj station And i am very happy i have the save file for the settings so if ever someone actually needs or wants it they can msg and I will send it
    If anyone else has tried to use Virtual DJ with the an Audigy Card and KX Drivers, can you guys tell me if u the the bpm is off by -8% all the time even when at 0. Any response will be apreciated.
    Just a thought --> (44.1-48)/48 = -8.12% --> ...
    jutapa
    Message Edited by jutapa on 01-27-2006 07:28 AM

  • SoundBlaster Audigy Value: Delay and echoing of sound output from head

    I'm having problems with the sound output of my voice when chatting using a headset.. I can hear echoes and there are delays occasionally. I first thought the problem was with the headset, and so I changed it. However, the problem persists!
    When I plugged my headset in my laptop instead of the desktop with the Audigy Value installed, I didn't encounter any problems at all with the sound. So I thought the problem is with the Audigy Value souncard.
    What could be causing these problems?

    You need set the ASIO latency through CT ASIO panel and not through Audition settings. ASIO Panel has only settings as milliseconds so if you select 10 or lower value your delay problems should be fixed.
    jutapa

  • Soundblaster Audigy 2 Value and Digital I/O Mod

    I recently bought this card, and the shop I bought it at did not sell the Digital I/O Module. I was wondering if anyone knew somewhere in Australia where I could buy it.

    Only place I've ever seen any of the bays sold is on Creatives UK online store and then its for an A2ZS so not sure it will work for you for basically 80 pounds with VAT. Here's a link for it http://uk.europe.creative.com/shop/product.asp?prod=588

  • Soundblaster Audigy 2 ZS Platinum and Acid Pr

    Hello. I am using an Emachines with 3.3GHz Celeron and .5G RAM and Windows XP SP2. I am trying to record with Acid Pro 6 at 24bit and 44.khz (seems to work with the default audio device - Microsoft Sound Mapper or something like that) but I do not get the I/O options that I have with?the Audigy. I went to Options - Preferences then clicked on the Audio device tab and I tried to switch the audio device?to Soundblaster Audigy 2 ZS and I get a message saying that this device does not support that bitrate or sample rate. The only time it will let me switch to Soundblaster Audigy is if I first change to 24bit and 96khz. The problem with this rate is that?it consumes hard dri've space rapidly. Can the Audigy 2 ZS support a 24/44. rate? I am still trying all kinds of troubleshooting. I'm also researching on the Acid Pro forum for info. Any feedback will be appreciated. Thank you. Jeremiah

    jmw wrote:
    I went to Options - Preferences then clicked on the Audio device tab . . .
    Edit:? I went to Options and Preferences in Acid Pro 6 to try changing the audio device type. Could I get a little reassurance that Audigy 2Z Platinum (Not the Movie Editor) supports 24/44. or 24/48?jmw

  • Soundblaster Audigy and Ventri

    I have a soundblaster Audigy SL? and use ventrillo for gaming. I tried headphones... I even physically unplugged my speakers from my soundcard and I still get game noise on vent? which of course dri'ves my friends crazy with the "feedback"? I have my connections plugged in accordingly? is there a setting somewhere i have missed?

    I *think* you have WhatUHear as the record device. Open up the Creative Control Panel (volume) and the far right option with the word Rec as the heading may have WhatUHear under it. You can click a drop down arrow and chose Microphone. Also, in Control Panel go to Sounds and Audio Devices, Audio Tab and click volume for Sound Recording. Make sure the tick is in the Microphone column.

  • SoundBlaster Audigy RX/5 Bass Redirection

    Hi everyone,
    i have buy the soundblaster audigy rx/5 and after i installed the driver i cant find any option to activated bass redirection. I wondered about because every onboard soundcard i ever had has this option.
    So exists any way to enable bass redirection for example an alternate driver like the one for audigy 2 and 4 on this forum?

    Hi,
    Unfortunately the Sound Blaster Audigy RX does not support bass redirection.
    I found this site with more information on bass redirection and a download link here.
    I've not tested this filter, so I cannot tell you if it will work to your requirement.
    Use at your discretion and risk.
    Regards,
    Colin-CL

  • Logic 5.5 and Soundblaster Audigy 2 NX

    Hi,
    Apologies if I ask some realy dumb questions, but I'm a complete novice in terms of this sort of thing.
    I have Logic 5.5 for my PC and have bought the Soundblaster Audigy 2 NX to use with the program so that I can record guitars, bass, and vocals for my band. I have gone through the process of installation via the CD supplied with the sound card, but Logic will not allow me to do any recording. I am reliably informed that this is to do with the fact that I don't have any ASIO drivers (not really sure what that means though!).
    Is there somewhere that I can download (preferably for free!) the necessary drivers to make the program work, or is the product unlikely to work at all?
    Any help is appreciated.
    Cheers,

    Maybe Asio4all - http://www.asio4all.com
    jutapa

  • Creative L3500 Speaker system and Soundblaster Audigy 2 ZS Soundcard (I have a driver probl

    Yes I have had a driver problem so i went to the download section of this site and picked up a driver program for my soundcard yet it doesn't work. When i do uninstall my soundcard (i need to uninstall current driver to install new driver)and i restart my comp after removing the old one i get sound, but i notice i don't get very good sound, not as good as my old before it stoped working. But then after i install new one it just doesn't work!
    Please help me if you know about drivers!!!!
    PS: I use windows XP and if you need any more info just request it from me.Message Edited by Nick345 on 02-28-200605:05 PM

    JRe: Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs0 I'm afriad that the CMSS3D option did not work? ? I still cannot get any speakers to play out of the rear of the soundcard.
    As I said before, the goal is to try to get sound to play out of both the headset and the speakers attached to the rear of the soundcard simuntaneously.
    The headset is plugged into one of those devices in the front that is in a 5 & /4" bay that has the individual knobs for adjusting volume for the headset and outbound levels for the microphone.
    The speakers are plugged into the back of the soundcard and do not play any sound in any of the sockets, starting from the firewire port and counting 3 over.
    Any suggestions? I? thought it might have something to do with the setting of the speakers from control panel - > Sounds and Audio Devices -> Advanced and picking the right choice there. No luck however. Same for the Creative Speaker Settings as well.
    I'm at wits end and I'd be very thankful to whoever can resolve this for me. =)

  • Connecting Soundblaster Audigy 2 to 2 speaker syste

    Hi all,
    I am using a Soundblaster Audigy 2 ZS. My PC is connected to a 7. Creative THX system.
    That is working pretty fine.
    I also have my LCD TV connected to my PC as secondary display and I've got a Teufel 5. system which I want to connect to the audigy.
    Reason: I want to watch movies played on my PC on my normal television. I could of course connect the audigy to the Teufel system, BUT this would mean switching cables all the time (from PC 7. to TV 5.).
    Is there some kind of high quality switch with which I could save this reconnecting of cables all the time?
    Thanks a lot in advance.
    and kind regards
    Sven

    Hello all,
    I am having a similar issue. I would like to connect my Audigy 2ZS to a Sony Reciever (STR DE-898) preferably via the digital out. The sound card and reciever are 25 feet apart.
    I have read that the digital out on the Audigy 2ZS is specifically for creative lab speakers, and that if you connect it to a normal reciever that it may damage the reciever is this true?
    Second, the other option that I have is to buy the 7. adaptor and connect RCA extension cables to the reciever.
    The last option is to connect it to the regular headphone jack out, and use an extension cable to connect to the reciever (This is what I am currently using), but the sound quality is terrible.
    Please help, I read the recent post on digital out ,which helped some, but still the question remains... if you connect the digital out on the Audigy 2ZS to a Sony receiver will this damage the receiver?Message Edited by asharabi98 on 05-27-2006 0:38 AMMessage Edited by asharabi98 on 05-27-2006 0:39 AM

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

  • Connecting Soundblaster Audigy 2zs to Home Theater Amplif

    Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
    My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
    I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..

    I am in the same situation as you. As the CL told me
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
    You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
    From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound.

  • Dual Soundblaster Audigy Inst

    Oddly, this is not going well at all. Some history first.
    I'm sure many would question the why's. I've seen other people post that they want to use two soundcards and everyone says why.
    I play alot of video games, and use voice chat. I'd like to hear game sound from my 5. sound system, and hear voice chat in a headset.
    I used to use two computers to accomplish this, but recently, my spare had a harddri've problem and went down. So i went to a local vendor and got a Soundblaster Audigy SE about 2 days ago. Testing with that and my onboard sound has been abysmal. Usually within a couple minutes, the setup will interact unfavorably with a videogame. With a game (eve-online or FFXI Online) running on one card (doesn't matter which) and Teamspeak/roger wilco/ventrilo running on the other, the game tends to get buggered up (popping sounds, then eventually the graphics either get very messed up, like the game losing track of where my character is). If i only use one app on one card, or both apps on one card, no issues.
    So, last night i went and bought another SB Audigy SE, thinking that perhaps there was a clocking issue with the on board card. Maybe, maybe not, as right now, as soon as windows attempts to bring both cards online during an acti've session of windows, it crashes/reboots immediately. If both cards are started during startup, the machine throws a Kmode exception 0xe bluescreen and hangs. I did disable the onboard card before attempting any of this, and reset the ESCD via bios.
    I attempted to uninstall the drivers and install both cards simultaneously by doing a fresh install, this just results in the Kmode blue screen. In safe mode, with both cards acti've, if i change the settings on one card, the settings on the other card change as well. I had read on the internet (various google results) that sometimes installing two of the exact same card will result in your system thinking both cards are the same card.
    So, i'm looking for a solid "I've seen/done this and you can fix it by:..." sort of answer, but any musings would be helpful too.

    I *think* you have WhatUHear as the record device. Open up the Creative Control Panel (volume) and the far right option with the word Rec as the heading may have WhatUHear under it. You can click a drop down arrow and chose Microphone. Also, in Control Panel go to Sounds and Audio Devices, Audio Tab and click volume for Sound Recording. Make sure the tick is in the Microphone column.

  • Can not install driver for Creative Soundblaster Audigy 2

    Hello
    I excuse myself for my unworthy english.
    I disabled motherboard audio in Bios before installation and before putting soundcard in
    It says that i can not find any soundcard
    but when i search for audio? drivers in thedevice manager(correct word for it's)
    it copies some files and audio works
    the sound card is listed in dxdiag but in games i have bad performance
    My system:
    Windows XP Professional(directly after installing windows i installed SP2 then SP3)
    Direct X 9.0c
    Intel Pentium 4? 3 Gh
    Gigabyte GA-8G000MK
    2 GB DDR ram
    ?Nvidia 6200 256 MB
    Soundblaster Audigy 2 ZS
    My system is completely new.
    Directly after installing windows(on formated partition)
    i installed SP2 then SP3
    then i installed Motherboard drivers
    then i installed graphic drivers
    then i installed antivirus drivers
    then i installed wireless lan drivers
    then i tried to install audigy 2 ZS drivers.i tried from CD and newest.Both didnt work
    i disabled antivirus before installation attempt
    i would be happy about help
    Only one cable is used from CD-rom to soundcard:? CD-in
    no other cable..buti was able to install long ago
    Message Edited by ignaz on 08-2-2008 09:27 AMMessage Edited by ignaz on 08-2-2008 0:36 AM

    Your welcome try my pax drivers that might slove your issue

Maybe you are looking for