Soundblaster creative tactic3D Rage wireless headset, Having problem charging

Just bought the headset installed all the software and charged them for the 8 hours.
Now the USB-chord (the charger) won't connect to the headset when I plug them in.
The USB is plugged in directly to the computer but as soon as they are plugged to the headset i get this message (USB Device Not Recognized)
I got w7 if that helps
EDIT: It helped when i used a USB adapter directly into a power outlet but not into the computor

Hi Guys,
You can refer to these forum threads for similar topics:
Article 1:
http://forums.creative.com/showthread.php?t=700751
Article 2:
http://forums.creative.com/showthread.php?t=702488
Cheers!
Philip-CL

Similar Messages

  • Cant hear any audio from Sound Blaster Tactic3D Rage Wireless headset

    after getting the Sound Blaster Tactic3D Rage Wireless headset i red through the booklet inside and saw that i could download software for it so i went to the address it gave me and downloaded the firmware for windows and after it was finished and i had restarted my computer the headset and USb connector would both flash nonstop. as well as this i cant hear any audio from the headset. help me if you can

    Just discharge it and then charge it. Should work then, and never ever try those firmware updates they are the terrorists of these headsets

  • Soundblaster Rage Wireless headset, strange problem

    i was playing a game when the headset just startet to reboot and continued to reboot when it got connected to the usb stick again, the headset have been stuck in a reboot cycle for the past 24 hours.
    anyone got an ide of what to do?
    tried to update the firmware on the stick but it failed and now the stick is dead.

    Hi danblo88,
    Do you want to try upgrading the firmware again?
    I have found two threads with similar problems, maybe you can try the solutions other users tried. One user tried discharging the headset battery and it worked, the other tried to remove the battery in the headset and put it back and it worked.
    http://forums.creative.com/showthread.php?t=709043
    http://forums.creative.com/showthread.php?t=708216

  • Sound Blaster Tactic3D Rage Wireless Firmware update fail

    Hey guys,
    As the title says, I have a bit of a problem. I just bought the Tactic3d Rage Wireless headset, and decided to update the firmware as I like to have the latest drivers when I get started on new hardware. So I update the transmitter while the headset was turned off. No problem.
    Then when it came to the headset I removed the transmitter and plugged the headset directly to the computer and started the appropriate application. At the end of the upgrade it said it failed to load the system after the new drivers was installed or something similar, and now it's just there flashing blue all the time. It doesn't respond to anything, and if I try upgrading the firmware again it says it can't find the headset.
    So I'm wondering A) Did I do something wrog here? and B) How do I fix it? Is there a way to restore the factory settings of the headset somehow?
    Please help! Thank you in advance.

    Hi guys,
    In an effort to centralize similar topics within our forum threads, I am closing this thread.
    Kindly post on the centralized thread (link below) for your concerns/ solutions to this particular concern:
    soundblaster tactic3d rage
    Cheers!
    Philip-CL

  • Soundblaster tactic3D rage wireless problems

    Hello so today i got this new headset Soundblaster tactic3D rage wireless, and after charging for 8 hours i plugged the power cable out, and inserted the usb adapter.
    Everything worked fine, the sound was good. i then decided to go and download the drivers etc.
    Then i tryed to install the firmware update, and i got an error where it said that it failed.
    After that, my headset was completely dead, its constantly glowing red, i cant pair it with the usb adaptar, and i have tryed everything. Cant turn the headset off at all.
    I have lookd around these forums but didnt really find any good answers on how i could fix this.

    apparently you need to get it replaced, as the failed firmware bricked it. Only answer I found out so far. That or maybe getting a kind soul with the previous firmware to give it to you might get it working again.

  • Creative Sound Blaster Tactic3D Rage Wireless crackling sound

    Tactic3D Rage Wireless crackling sound all the time when playing any sound on the headset.
    Work OK on laptop and other PC in the home. Just not my PC lol. Motherboard: Zotac H55-ITX Wifi. CPU Intel i3.

    Pauleley,
    Welcome to the forum!
    Sounds like an "interference" issue to me. Definitely not an issue with the headset as it is working perfectly fine on another machine. The transmitter operates in the 2.4Ghz frequency spectrum so you might want to check out what other devices runs on the same spectrum near to your computer (just a thought).

  • Tactic3D Rage Wireless Constantly Turns Off while Charging

    I got the Tactic3D Rage Wireless a couple of years ago and it has had many problems from the time I received it. I eventually got the others fixed, or mostly fixed, but this one has been annoying me increasingly in the past few months.
    The headset not only rapidly connects and disconnects with Windows 8 (I think it is a problem with windows and not the headset for this one), but it also turns off the second I turn it on while charging. This makes the headset completely useless when I am charging it. This would not be as bad, but now the headset will not actually charge when it is on its charger. After it "charges" for a few hours, I take it off of the charger and I immediately begin to hear the beeping, notifying me that the headset is low on battery.
    I finally made an account on these forums after a couple of days failing at searching for this problem with others so now I am posting this. Help is greatly needed for I don't want to be forced to spend more money on another headset if I can get this one fixed. Please reply with any questions I have not answered, and have a good day.

    Hi Logo594
    You may want to refer to this article, specifically the last paragraph of the article regarding charging.
    http://support.creative.com/kb/ShowA...spx?sid=111092
    You also mentioned that this headset is at least a couple of years old, so it is possible that the battery
    does not hold its charge well. If this still does not work, You may contact Support here.
    Cheers,
    Colin-CL

  • HP H8000 Wireless Headset Dongle problem

    HP H8000 Wireless Headset Dongle problem
    The dongle has stopped working, the blue light which it has generally does not show up anymore.
    Eventually the headset is nolonger useful without the dongle working..
    Pls help how do I fix this or get a new dongle....

    Victor,
    Please use this form instead. Let us know if you are still having problems writing in.

  • Want to buy a Tactic3d Rage Wireless transmitter

    So, I've lost my transmitter for my headset(Yeah, i know). However, the creative support is basically charging me for a new headset when I want to buy a transmitter from them, so I thought I could check if anyone here had an old, used one for sale?

    Originally Posted by Hannestheguy
    So, I've lost my transmitter for my headset(Yeah, i know). However, the creative support is basically charging me for a new headset when I want to buy a transmitter from them, so I thought I could check if anyone here had an old, used one for sale?
    Hi Hannestheguy,
    Hope you get to buy a transmitter for your Rage Wireless headset!
    But in any case it doesnt work out, maybe you can purchase a cheaper set through alternative online sources? (EX: Amazon) I've posted a link below in case youre interested:
    http://www.amazon.com/Creative-Blast.../dp/B008Y1KLME
    Of course this is only a last resort if you dont have the luxury of waiting for a seller.

  • Having problems charging my iphone4,have had it 8 months no problems until now, help?

    I'm having problems charging my iphone4 on any charger.  Does anyone have any help?

    Could you be a little more specific than "having problems"?   Have you tried another cable?

  • Sound Blaster Tactic3D Rage Wireless - Driver and Firmware update, now it's frozen?????????

    Just recieved my headphones yesterday - plugged it in and charged it = works. I then decided to download the newest drivers and firmware and went straight to bed. This afternoon, suddenly no sound is detected, what so ever! The USB Power LED flashes slowly and a constant red glow is showing at my headphones.. When I try to re-pair it, the USB Power LED flashes rapidly as it should, but neither the Mic Mute button, nor the Connect Button on the headphones responds.. It feels like the headset is simply just frozen right after the new driver/firmware installation.
    I've tried everything pretty much.. Went from Wireless to USB to see if that helped, but it didnt. Tried to remove / setback the drivers, still dosn't work. Headphones is just completely frozen with no buttons working and a constant red glowing light - can't be turned off or restarted!!!
    WHAT TO DO?!?
    Cheers,
    Alexander

    My headphones just ran out of power during the day = it resetted itself. I then connected it again and re-paired it. Atm it's working perfectly fine again. I will now try to reinstall the Control Panel, not the driver though, hopefully it will work this time and wont make the headphones go into "non-responding-retarded-mode" once again :-)
    Conclusion: For me it felt like it was either the Drivers or the Firmware update, maybe both, which made my headphones "crash", or atleast not respond to any command / buttons pushed. If anyone faces the same or similar problems as me, due to installation of drivers/firmware, let your headset run out of power (if you as me, don't know how to remove the battery manually) and just reconnect it :-) Should work then.
    - Alexander

  • E1500 wireless router having problems streaming video and netflix

    We got a new E1500 router 2 nights ago. The internet works fine, but it has big trouble streaming videos and Netflix, those types of things. I have changed my MTU setting and all the settings suggested in the "Guide Me" section. My drivers are up to date on my router and on my pc. It just started happening with this router. We had a Netgear before and we have no problems streaming at all. I have rebooted and reset the router and cable modem.
    Does anyone else have some suggestions I can try?
    Thanks,
    Debbie

    The concern that you have is for both wired and wireless or just for the wireless? If it is for wireless then try these troubleshooting steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
    1] Open the software and go to the option which says "Router Settings"
    2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
    3] Then go to the Wireless tab, change Channel width to 20 MHz only and change the Channel to 6, 9, 11...Save the settings..
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
    Then check the status of streaming video and netflix.

  • Nokai E71 and PS3 Wireless Headset pairing problem

    hi!
    My PS headset should be good with my E71 Phone,
    but i have no idea, how to pair them!
    I've tried to find answer online, but couldn't.
    Could someone please give me some advice?
    Thx!

    many have talked about its need, I dont know when a software update will enable this
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Wireless Adapter having problems

    My laptop Paviion 15-b008TX contains Ralink Radio Model RT3290. I have issue connecting to the wifi.I have tried updating the latest drivers anduninstalled and install back the wireless adapter again, but none of it works.How can i solve this issue? Can I just change a new wireless adapter outside?If its possible what are the wireless adapter model that is compatible with my laptop? 

    You need to open firewall ports on your cisco router
    Port number are (88 , 3074 , 443 , 10070 - 10080)
    Use port triggering instead of port fowarding.. You can find this under the application and gaming tab. on the setup page of the router. 
    Change the MTU size to 1365. Disable the UPnP. Go to Security tab and uncheck the box 'Filter anonymous internet request'.
    Make sure that the router firmware is upto date.

  • Why am I having problems charging my phone after upgrade to IOS 6?

    I just updated my phone to the IOS system yesterday. Ever since I did that, my phone will not charge right! I keep getting an error saying my charger is not compatible with my phone anymore..but yet it was before the update? Any suggestions to fix this problem?

    My iphone battery is loosing 1% per minute talking on a call - that is not exceptable given that it never behaved this way prior to the 7.1 update. I have gone through and turned off everything that I read that may be causing the new batterey drain - but nothing is helping.

Maybe you are looking for

  • Time Machine tells me to start a new backup

    Recently I changed the motherboard in my MacBook Pro because of a crash in the graphics card. When they gave me my computer back Time Machine has been seeing it as another machine, when it has the same hard drive (which is the one I want to back up).

  • 24" iMac and 3GB RAM limit issues

    I have a legitimate concern with the 24" iMac and wanted to know if anyone else thinks it's an issue. Read Apple's tech note on late model 2006 iMacs including the new 24" model. http://developer.apple.com/documentation/HardwareDrivers/Conceptual/HWT

  • Downgrade to from IOS6 to IOS 5.1

    I need to downgrade my Ipod touch from IOS6 to IOS5.1.1 how can I do it. Just bought my Ipod 2 days ago. If not possible then I will return it

  • Consignment fill-up - Output Printing Problem - Z customizing problem

    Dear Gurus, I have customized and copied the following 2 sales documents types: - OR - KB into ZSTA and ZKB When I create a Sales Order using VA01 and ZSTA, and chose 1 material + 1 service, the printed invoice clearly shows 2 items for each one of t

  • Standard BAPI for creating groups in SAP

    Hi, I have a requirement to create user groups in SAP executing a BAPI from an external application. As an input parameter the group name and group description will be passed to the BAPI. I am unable to find the standard BAPI for the same. Can anyone