Soundblaster live 5.1 causes blue sreen device error on b

I have a Soundblaster Li've 5. sb0220 that I am attempting to installl in an older pc running windows 2k. I do not remember what kind of mobo it has. Everytime I go to boot the computer, it gives me a blue sreen and says something about bios not being compatible with the device. The only way to get the computer to boot is to remove the card, and then it boots fine. I can't even get to a point where I can load drivers. Has anyone had this issue, and if so how did you resolve it. This happened with the same pc when it was running XP, so it has to be some kind of hardware conflict and I am just not sure how to get around it. I have disabled the onboard sound device so that the only one that should be working is the SB

Try using this CD instead.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8432

Similar Messages

Blu-Ray "device error"code 3 note

Im getting this error on almost every progect I do I
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
And sometimes this works this time it is not.Ive been searching the web on this and its been going on since CS3
1.How do I get this to work?
2.Why has this error been going on for so long (3 versions) ?
IM using Encore CS5 Mac Pro
Thanks
This photo is from a different post that had the same issue

The Error code 3 comes mainly in two scenarios:
1. When the AuthorScriptHDMVSessions files gets corrupted and
2. When either your Blu ray disc or the burner is damaged.
This device error is most probabily because of your damaged disc.
Try using new BD.
Best of luck.
Thanks,
Ramesh.

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

Blue tooth device missing.

The laptop i own is a LENOVO G560 purchased from new york.I currently reside in mumbai,India. When i was about to set up my laptop to my surprise the bluetooth device was not detected..After several calls to the customer care and installing and reinstalling the drivers several times, I was told that there is a hardware issue.After exchanging emails and several calls to customer care again, i was told to visit the service center.
Now this is just the start of my horrifying experience. When i visit the service center , they open up the laptop and i was told that the blue tooth device is missing.And they refuse to order any part and fix it, because this is a case of manufacturing defect as there was no device present in the first place.So i was told to call up the customer care from the service center, as they do not communicate with the customer care themselves.And the customer care refused to help me with it saying it was the technical department and they do not handle such cases.So i was told to write an email asking for a replacement of the laptop.
Now i have written an email, but have got no reply yet. I don't know what i am supposed to do!

Hi roshanp25,
Oh my, i'm so sorry for all the troubles you are having. Something should be missing that caused the miscommunication.
Let me see what i can do for you. Do you mind to send me a private message with some details below?
Full Name
Machine Type Model (e.g.2005, or 7660-14A)
Machine Serial Number
Phone Contact
Email Address
Reference number with call centre(the customer you've mentioned) and service centre
Thank you.
Regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Is there a way to play to 2 blue tooth devices at the same time?

is there a way to play to 2 blue tooth devices at the same time from my ipad?

If you want to have 2 sets of headphones plaing at the same time, just get a headphone splitter. Here's a link to several that will work on your iPad......http://search.yahoo.com/search;_ylt=Ao7XF2KB2RaGRXX1SKOKmICbvZx4?p=headphone+spl itter+ipad&toggle=1&cop=mss&ei=UTF-8&fr=yfp-t-701

Fresh install of Server 2012 R2 causes inaccessible boot device on first Reboot

Hello Everyone,
Doing a fresh install of Windows Server 2012 R2 on a SuperMicro X9DRT-HF+ motherboard based server. The server is using iSCSI boot, setup detects the iSCSI disk and copies its files, finishes the "Getting files ready for installation" "Installing
Updates" phase, reboots, takes a while and eventually gives a Blue screen with Inaccessible Boot Device error. I have tried some changing options in the BIOS, I've had Nimble (storage array) support on the phone and they confirmed the setup is correct
but for some reason after the first reboot Windows can no longer find its install files and gives a BSOD.
Additional Information:
Server: SuperMicro X9DRT-HF+ (no internal disk)
Storage: iSCSI disk provided from Nimble CS220 Array
Windows 2008 R2 Server installation will proceed without any problems.
I checked the \Windows\Panther\Setupact.log / CBS.log file and there doesn't seem to be anything indicating a problem.
I have googled a number of times to find solutions but most articles reference a similar problem after installing a particular KB (which shouldn't be the case here). Need some help :)

Hey Tim,
Thanks for your reply, since the start of this post I have also installed MDT to try a different approach to installing the OS. Using MDT I have injected the Intel I350 driver into the installation so it should be restarting with the driver loaded.
The odd thing is that when the server reboots the Windows startup screen loads for about 4 minutes before it gives the INACCESSIBLE_BOOT_DEVICE error. This would indicate to me that it sees the disk and tries to boot from it but then something goes wrong.
Other than the \Windows\Panther location is there another place I should be looking for log files during this part of the Windows install? I have reviewed all the locations listed under the TechNet library article "hh824819" (I can't post
a link to the article but a google search brings it up) but I can't seem to find a log of when the server crashes what it is doing at that point.

Skype video crashes my GPU driver and causes blue screen.

Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

SOLUTION: Flash Video Causing Blue Screen & Lockups

Symptoms: While playing a flash video, your screen locks up; goes black; you can hear audio in the background; and/or Blue Screen of Death. The Blue Screen indicates a fault in nv4_disp.dll.
================= SOLUTION =================
Newer versions of Nvidia Drivers are causing the problem. Disabling hardware acceleration in Flash only reduces the frequency of the lockups, but does not resolve the issue.
Use this version of the Nvidia driver (but no later): 266.58
Get it here: http://www.nvidia.com/Download/Find.aspx?lang=en-us
This is confirmed to resolve the problem.
Later Nvidia drivers added CUDA 4.0 (Unified Virtual Addressing (UVA) and GPUDirect™ v2.0) which is the root cause of the issue with "older" cards such as the 200 series and the 8 series.
If you have a somewhat older graphics card, there really is little need to update past version 266.58.
========================
Keywords: Flash Movies youtube videos Nvidia Lockup Blue Screen Crash bluescreen bsod
Dump:
crash dump file: C:\WINDOWS\Minidump\Mini081511-02.dmp
This was probably caused by the following module: nv4_disp.dll (nv4_disp+0x1DB0EC)
Bugcheck code: 0x1000008E (0xFFFFFFFFE0000001, 0xFFFFFFFFA2AC1925, 0xFFFFFFFF9F6CC8B8, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
file path: C:\WINDOWS\system32\nv4_disp.dll
product: NVIDIA Compatible Windows 2000 Display driver, Version 280.26
company: NVIDIA Corporation
description: NVIDIA Compatible Windows 2000 Display driver, Version 280.26
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nv4_disp.dll (NVIDIA Compatible Windows 2000 Display driver, Version 280.26 , NVIDIA Corporation).
Google query: nv4_disp.dll NVIDIA Corporation KERNEL_MODE_EXCEPTION_NOT_HANDLED_M

Thanks for the heads up!
Chris

BB Desktop Software causes Blue Screen at Windows XP

Hi,
I'm using BB Desktop Software 6.1.0.35 at Windows XP over Lenovo X201 laptop. When I try to sync the adressbook or calendar between my BB(Storm II 9520) and my laptop, it often causes blue screen at my laptop.
I tried to uninstall and reinstall the desktop software but the blue screen occures again. But, the same version of Desktop Software at Windows VISTA over HP pavillion Desktop doesn't cause similar problem.
Please kindly let me know how can I fix it or please check if there are any defects at your Desktop Software.
If you need, I can send the screenshot to you via email.
Best Regards,

Just unisntall this version and install the desktop version 5.1. That will not give you blue screen infact it is fully compatible with xp
Need any help please let me know

Device error when burning Blu Ray disk at 96%

Very simple program to use so far. Just drag and drop.
My current project was shot in HD 1080p about 2 hours or 13 gig long and I made 4 lower resolution DVD's no problem. I like how it shrunk it with out me having to do anything other than check the box (use space available)
However when I went to make Blu Rays in addition to taking about 18 hours its gets right to the end and spits the disk out unfinished and has device error at about 96% of burning finished. Disk will not play.
I have ruined 3 blank 4x blu ray disks so far, same result. I have down loaded and installed the 8.01 update, I will turn off the screen saver and anything else I can find, before I try it again.
Its a new computer with only PE8 running on it. Quad core Gateway with 8 gig ram and a almost empty 1tb hard drive and LG blue ray writer.
I have not tried to burn anything else with the blu ray writer, as thats what PE8 was for.
I did not have the timeline fully rendered before I started, if that makes any difference.
Anybody have any ideas.
Thanks in advance.
Philip

Sorry I'm a newby. I'll put this is PRE 8 where it belongs.

HT201413 I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

Hi there,
If you are experiencing an issues where iTunes is not recognizing your iPod, then I would recommend taking a look at the article below.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
-Griff W.

Device error to export on Blu-Ray

In Adobe Elements 4, when i made export to Blu-Ray a device error apear . I repeat the export three times with diferent discs,Verbatim 2xBD-R , Memorex 4xBD-R,and the same problem apear..The computer is a Sony Vaio AR-71S. Please help me...

No need to say that you already tried to restart application.
For 'Device error', try whether device working properly with some other application like Window Movie Maker or other app comes with BluRay burner.
'Device error': try to connect device first and add media to it and than start Premiere Elements
'Device Error': Insert some bluray dics or movie to bluray burner and check whether window explorer able to read it properly.
'Device Error': update Blu-ray burner firmware.
'Device Error': In Premiere Elements, Share, select 'BluRay' not 'DVD' and click on rescan.
Please try these options and till than let me think some more way to help.

None of Blue tooth devices are being detected by my iPad

My iPad won't detect any bluetooth device. It keeps on looking and looking but will not detecte while the same device will be detected by my iPhone 4 and iPhone3.
I have tried 3 Hands free blue tooth devices but none is being detected. iPad won't even detect the iPhone 4 sitting next to it.

Many headsets use the Hands Free Profile (HFP) which is not supported by the iPad but is supported by the iPhone. On the iPad you can connect to devices that uses the A@DP profile which support stereo headphones and some headsets and speakers, keyboards via the HID profiles and some other devises for gaming. See the following for supported profiles:
http://support.apple.com/kb/HT3647

Soundblaster live 5.1 causes blue sreen device error on b

Similar Messages

Maybe you are looking for