Soundblaster Live! CT4620 - what driver to install for Windows XP P

Please can someone help me? I've upgraded from Windows 98SE to Windows XP Pro and need to install a driver for my Soundblaster Li've! CT4620. I tried to install one driver and it says "The Windows operating system is not supported" and the install exits. I'm stuck! What should I do?
Thanks,
Nick

Hi Nick,
The CT4620 is the original SB Li've! card. You should be able to install the Li've driver unipack:
Li'veDrvUni-Pack(ENG).exe
It's available under Support> Download (just select "SB Li've!" in the product list).
Cat

Similar Messages

What driver to install for audigy 2 zs

& hi
i just reformatted my computer and installed w7 64 bits, 8 gb of ram, and i see that daniel k just released a 3.8 version of his driver....
i also see official driver?
Creative Sound Blaster Audigy 2.8.007
i own a audigy 2 zs, wich driver should i install?

[url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">the latest[/url] would be a good place to start

ITUNES 10.6 is not installing for windows 7

ITUNES 10.6 is not installing for windows 7;

Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users.

Hi @mfatihbodur
Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
Validity Fingerprint Sensor Driver (Windows 8.1)
HP SimplePass Identity Protection Software (Windows 8.1)
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How to disable drive letter assignment for Windows 7 64 bit

Hi everybody,
Currently, I have a problem that need your help for my company
I received a new request from my boss, that is disable USB removeable storage on Windows 7 64 bit
I found out and apply some solutions from internet but it cannot be solved
In some solutions, I pay attention to a good one: Disable drive letter assignment for Windows 7 64 bit
I think it may solve my problem. But how to do it??? I need your help from all of you
Thanks for your support!!!!

Hi,
Let's verify your issue. Did you want to disable USB storage device?
If yes, try this:
1. If you have not ever already done so, you must connect a USB storage device
to the computer now, and wait until Windows installs it and displays it in the Computer window with an assigned drive letter, then
disconnect it.
2. Press the Windows + R keys to open the Run dialog, type
regedit, and press Enter.
3. If prompted by UAC, then click on Yes.
4. In Registry Editor, navigate to the location below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\USBSTOR
5. In the right pane of USBSTOR, double click on Start to modify it.
6. Type in 4, click on OK.
7. Close Registry Editor windows.
Karen Hu
TechNet Community Support

How do I transfer animations on a portable hard drive set up for windows os onto my new macro?

How do I transfer animations on a portable hard drive set up for windows os to my new mac book pro?

You should be able to copy from a drive even if it is setup for Windows.
If might help if you can tell us how the drive is formatted.
Allan

Bluetooth driver fix needed for Windows 8.1 new install

I recently did a clean install on my Lenovo Thinkpad T61P of Windows 8.1. Bluetooth is missing in PC Settings but does show up in services and it is enabled and set to automatic. Don't think that matters as the program or drivers are missing. Can someone direct me to the proper download link to get this installed and showing up in PC Settings so I can get it running? I cannot find proper download to install and this is a well known issue as I have upgraded from a XP system.
thanks in advance

thanks for replying. As I was waiting for some answers to how to fix this bluetooth issue, I was continally bombarded with this popup window for time and date per the side window screen when you scroll over by it. I tried fixing it and decided to go into the mouse properties in Control Panel, went to mouse, and then into Ultranav. I unchecked the second feature that evidently froze my cursor, and now I have no cursor at all. I have booted up and as soon as I enter my login pin, I lose the cursor. I have tried system restore but it wants my anti virus disabled and I have not been able to do it. I have gone bake into the same settings feature to enable, but as soon as I do, it immediately transfers me out of the Ultranav properties menu.
Short question, Can I boot load the new driver into this OS that it needs? I do not see this driver as a property for my touchpad. I suppose I could get a mouse and try it, but do not have the USB end for the ones I have. Any idea how to get this Ultranav driver loaded without any cursor? I have no idea and system restore does not work without disabling antivirus and I cannot do this without cursor. Tried to boot to safe mode but I have not been successful as I don't know how evidently. Any suggestions would be appreciated then I will get back to you on the bluetooth issue.
thanks
edit to say I found a laser mouse and inserted it and it did get my cursor back. I have not disabled antivirus and doing another system restore. Two points come up as a result of this. How do I disable my antivirus using Windows 8.1 on a laptop that does not have FN + F8 option? Is there a file you can install to get this nice bootup option to work?
Second. is it possible to put a shortcut on the desktop or startup page for system restore. Maybe it is in the programs section as I just now thought it may be there but can't look right now as doing a system restore.
Finally if anyone can tell me the current drivers to download and install for a Lenovo T61P using Windows 8.1 for the updated Ultranav files and also the bluetooth recognition file. I will get back and answer your questions on what is seen as soon as I am up and running again, which should be shortly.
And if anyone has the answer to disabling the popup date and time window in lower left hand corner when the charms menu is activated, I would greatly appreciate it as this drives me crazy. this is how I got all these things messed up to begin with.
thanks and I hope this is not confusing.

What drive to install the Beta?

My major programs are installed on my C drive including the operating system, CS5 standard, and LR4. I would like to install the Beta CS6 to my D drive that I use to install some of my other programs. Can I do that without any glitches to how the beta will run? My thoughts on installing to Drive D is that it would facilitate a cleaner uninstall of the beta when the final CS6 product is ready. I use Windows 7 64 bit, 12 gb ram, Nvidia GT430, and 7 hard drives.
Thanks,
Lee

VMware Player 4.x is not complicated at all. The only problem: You need an OS licence for Windows.
The chance of system corruption is not affected by installing to C: or D:. The main configuration storage in Windows is the registry and there is only one instance. The system directory exists only once (%Systemroot%), too.
If an installation crashes registry or Systemroot it will do so and it doesn't matter which drive you are using.
Installing a program on different drives will not do what you expect. It doesn't minimize the risk.
Ciao, Walter

What kind of install for upgrade?

I am running a Powermac G4 tower with Panther. For a variety of reasons I never upgraded the system but now I would like to upgrade to Tiger. There are too many programmes and devices that won't work under Leopard but I am now encountering compatibility problems with Panther. Also Safari keeps quitting. My question is what kind of upgrade should I do? I was thinking I would wipe the hard disks clean (I have two) and start afresh with Tiger. Is this advisable? If so, what do I need to save in order not to lose all my programmes and drivers? I have an external hard drive big enough to back up the whole system. And how do I reintall all that after Tiger is installed?

Hi-
I was thinking I would wipe the hard disks clean (I have two) and start afresh with Tiger. Is this advisable?
As long as the drive that you erase is not the Panther volume, erasing the drive and installing Tiger as a new volume is good.
In Tiger, use either the Setup Assistant or the Migration Assistant to move all needed files and applications from the Panther volume to the Tiger volume.
Do not erase or modify the Panther volume until you have tested everything in Tiger.

Wifi driver not installing for windows7 64 Bit edition

HI
i had replaced my operating system to windows ultimate Bit.
My laptop model no: G580 (20157)
after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
then after i tried to reinstall my driver and installed my driver.but wifi is not working
please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
please anyone suggest me wether there is any other driver for this problem....

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
NOTE: To check how the BIOS menu looks and to explore its options click here.
Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
Support Drivers & Software downloads
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Sound Balster live! - What driv

Hey, my soundcard is a SB Li've! (WDM) but on the wevsite there is no drivers for a card with that name. So what driver should i download instead?
Cheers

<FONT color=#ff3300>it says there is no updates for the produkt, can that be right?
my bad, theres no Danish drivers. I joust had to selekt the uk instead.
thx
Message Edited by Jhondon on 07-27-2006 02:38 AM

Satellite P100-426 - What sound driver I need for Windows 7 64bit?

Hello,
I have installed Windows 7 64bit to my P100-426. It was no problem but I can't foud a driver for the sound chip and I also don't know wich sound chip is on board.
Maybe someone can help me.
thank's a lot.
sven_lee

Hey,
The problem is hat neither for Windows Vista 64bit or Windows 7 64bit are drivers available for your notebook model. I have checked this on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
According the Toshiba page your notebook has Conexant sound chip
But Conexant doesnt provide drivers directly so you have to check the Toshiba website again
I found out that Satellite P300 has also Conexant sound card and there is a driver for Windows 7 64bit available. In my opinion you should try the sound driver from Satellite P300. Theoretically this should work. ;)

Don't know what driver to download for my NX6600

I have an NX6600 card that I do not use sli (at least thats close to what it is). I am having problems figuring out what driver I need. They show a driver from 2004 for the NX6600. They also show newer drivers for geforce 6 cards. I don't know if my nx6600 is a geforce card or not?
They show a driver for the nx6600 that uses the sli specifically so I can't use that one.
Any Suggestions?

I'm sorry I mistyped. Is my nx6600 pciexpress card a geforce 6 card. They have a lot of new drivers for that type. I have tried the uni driver in the past and I have had some problems. I have also read on the Asus board that if you pick the wrong driver it could cause windows to crash at bootup. A problem I have been having as I build new machines. So I wanted to try something else.
For example: You take about 2 hours updating all the patches on a windows 2k/xp machine and it works fine. You reboot it and it works fine. You walk in the next day and turn it on and windows says a systemcde file is missing, or some other nonsense.
F8 etc doesn't allow you in. Using win 2k your only solution is formating the beast.
But Xp is smart enough to get around it, boot with XP and it says we need to do a chkdisk your drive has bad sectors. Every few times windows comes up with this bogus drive bad warning. The hd's are fine unless 8 drives in 8 different systems are bad. Windows checkdisk does not find bad sectors.
One guy in the Asus forum said the nvidia driver is causing it from the msi cd. He used one on the msi web site and his is fine now.

What download is good for Firefox 33 for silent install for windows os?

In fire Fox 33 download we see there is setup stub .exe , when will setup.exe for firefox 33 be available as we cannot do a silent install for setup stub.exe . we have no issues in doing silent install for setup .exe which we had for previous versions , also where we can find the download for firefox 32

Older releases can be found on the Mozilla CDN server, but keep in mind that older versions are not safe to use on internet as they have disclosed security vulnerabilities.
*http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/32.0.3/
*https://www.mozilla.org/security/known-vulnerabilities/firefox.html
*https://www.mozilla.org/security/known-vulnerabilities/firefoxESR.html
You can also look at the Firefox 31.2.0 ESR version if you want to use an older version that is up to date:
*https://www.mozilla.org/en-US/firefox/organizations/all.html
*https://www.mozilla.org/en-US/firefox/31.2.0/releasenotes/
*https://www.mozilla.org/en-US/firefox/organizations/system-requirements/

Clarification on Bootcamp 3.1 install for Windows 7 Support

Hello all,
I'm looking for some expert opinon on how the BootCamp 3.1 update is supposed to be performed.
As some 3rd party websites state that these updates need to be applied prior to the Windows 7 install. While Apple's online documentation talks about installing 7 and then doing the update.
The reason why I think that apple's process is more accurate is because the 64-Bit driver download is an ".exe" extension. However before I do anything with my MacBook Pro I wanted to find out what others are doing for this OS install process.
If you could clarify the process it would be appreicated as the Software Update feature in Mac OS X doesn't seem to find any updates related to BootCamp.
Thanks in advance

So what you are saying is that even though the bootcamp utility exists and has already allocated my spot for Windows 7 on Snow Leopard Boot camp doesn't exist thus I can't get the 3.1 update yet?
I'm very familiar with computing terms, and setting up devices... However no documentation really clarifies the whole 3.1 process. All that I can see from apple's perspective is to allocate the bootcamp space. Run the windows 7 install, and then use the snow leopard update and the assoicated drivers (32/64 bit).
However even with the Mac OS X online, I can't figure out how you get that update as each site talks differently.
If someone can clarify exactly from an out of box Mac, to snow leopard boot camp allocation and windows 7 install for these 3.1 updates it would greatly help with my confusion points here.
Thanks!

Soundblaster Live! CT4620 - what driver to install for Windows XP P

Similar Messages

Maybe you are looking for