Soundblaster Live Driver is

Hello,
I have a Soundblaster Li've Card which I inherited from my brother. As for the version, I think it is just the original. I cannot be sure because I cannot access the card to get info about it. The issue I am having prevents it.
The issue is this: First off I noticed a reverb effect, I have had this before, and in the past just accessed the card thru my start menu (XP is my OS BTW) and changed the settings on the card. I tried to do that this time, and got an error saying "AudioHQU- Cannot initialize audio driver. Reinstall audio driver."
I am not sure how to do that as the only options I can find are to either update the driver or roll it back.
I tried to update the driver patch from the site, I got the file successfully, and ran it directly, but it said it could not find the hardware. Then I tried to roll it back and that did not work either. I also ran a diagnostic using the Creative software on my start menu. The results found a failure on: Mixer Driver, Sound Font Setting, and Mixer Settings Check.
I am not sure what to do to make all of this pan out. I am not an idiot, but not an expert either. I updated the driver a few months ago which seems to have caused this mess, but now I seem to not be able to go forward OR back.
If someone could help me I would appreciate it a lot. Though I believe the product is out of warranty, it is still a perfectly functional card, other than the reverb and driver issue.
Thanks!

Alastor,
Try using Li'veDrvUni-Pack(ENG).exe driver for the sound card.
You can download this driver from http://us.creative.com/support/downloads/ and do a search for the filename.
Jason

Similar Messages

ALsa + Soundblaster Live 5.1 + 5.1 Sound

HI there!
I finally bought a 5.1 Surround System today, but I have a major problem. Only the Subwoofer, Fron-Left- and Front-Right-Speakers are working, no Sound from Center, Surround-Left- and Surround-Right-Speakers
Here is my modules.conf, Alsa-Page says it should work:
# module : ALSA
alias char-major-116 snd
alias snd-card-0 snd-emu10k1 snd_cards_limit=1
options snd-emu10k1 snd_index=0 snd_id="EMU10K1" snd_extout=0x1f0f
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd-pcm-oss snd_dsp_map=0 snd_adsp_map=3
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
And now my .asounrc
pcm.emu10k1 {
type hw
card 0
ctl.emu10k1 {
type hw
card 0
I tried so much already and nothing works
I played around with alsamixer and I finally got the Center-Speaker to work, but it just works instead of the Front-Left-Speaker. It really sucks.
Maybe you can help me, it would be nice.

i had some same issues , but i have soundblaster live 24-bit , but disabling the onboard bios didnt do anything for me , so i had to look for some ways to figure out how to fix this , * love thy google.com/linux *
bash# speaker-test -c6 -t2 ( this is to test your surround speakers , providing your using ca0106 driver such as myself )
if you only get a few channels you could also make your ~/.asoundrc file with some goodies in it ill post a few examples i have found
pcm.ca0106 {
type hw
card 0
ctl.ca0106 {
type hw
card 0
ctl.!default {
type hw
card 0
pcm.!default {
type hw
card 0
pcm.!default {
type plug
slave.pcm "dout"
pcm.dout {
type dmix
ipc_key 1025
slave {
pcm "hw:0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
ctl.dout {
type hw
card 0
pcm.duplicate {
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
pcm.dmixs51 {
type dmix
ipc_key 1024
slave {
pcm "hw:0,1"
rate 48000
channels 6
period_time 0
period_size 1024
buffer_time 0
buffer_size 4096
pcm.!default {
type plug
slave.pcm "dmixs51"
pcm.duplicate {
type plug
slave.pcm "dmixs51"
slave.channels 6
route_policy duplicate
Now dont forget to run alsaconf before you do this and make sure you have 5.1 surround speakers for this as well
any other questions about the soundblaster live 24-bit , contact me and ill try to help if i can , ( i have been reading about this for days )

SoundBlaster Live! 24 and Vista - Deteriorating Sound Qual

I've recently upgraded to Vista Business, and my system informs me that except for the drivers for an ancient scanner all is working properly.
When playing music (using a Creative SB Li've 24bit card with the most recent driver installed), all starts off well (in fact playback is better than under XP Pro) but the sound quality starts to deteriorate badly, especially when I open a browser. Quite often the browser itself seems to freeze.
I have 3Gb RAM, with a 3.60Ghz P4 processor.
Task Manager tells me that often I am running at 00% of CPU capacity, though the problem seems to occur at lower usage too.
I've checked everything I know to check but just can't seem to get to the root of the problem. Can anyone suggest anything I should be looking at?

Sadly no real progress.
I simply pulled the Soundblaster Live 24 out of the computer and am using the onboard sound instead which at least for me Arch recognized just fine.
I haven't been able to get any suggestions for why the Soundblaster was not working, but I am going to try another sound card a friend lent me and see what happens.

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

Problem with DTT3500 soundset and onboard Soundblaster live! 24-bit

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster live!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster live! 5.1. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5.1 surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster live! 24-bit?
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...?
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5.1 speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster live! 24-bit is an enhanced version of the soundblaster live! 5.1? Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt0104&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
I would apreciate any help, as i'm really stuck at the moment.

does anybody use the soundblaster live! 24-bit to power a surround speaker set? or is it just impossible? (for gaming)

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

Problems installing soundblaster live

I just bought a kt4 ultra I am trying to install a soundblaster live sound card, I go to the bios and disable the audio on board option, but when windows xp starts it recognizes the sound card but then it hangs, any help to fix this is much appretiated. thanks

try pci 4

What is the difference between Icloud and Live Drive?

I had purchased for me seperate storage space where by i could download music/pictures to my cyper drive and my Ipad would pick it up. Is this Icloud or Live Drive?

That is livedrive. You cannot use icloud to keep your files online unless the files are generated using iworks. But, icloud is free from apple, 5 gb worth of space. Currently usage is pretty limited, cannot compare wth livedrive, dropbox or sugarsync.

I want to centralize my Itunes Media library to a Mybook Live drive.

I have bought a My Book Live drive as it said I coudl run an iTunes Server. I want to be able to have one central Itunes Media location for all my music and apps etc. So I have moved this to the My Book live. When I open Itunes I see all my music under the LIBRARY and under SHARED/MyBookLive. I don't see my apps or other items? Also if I add a new album to my music library it shows up in both on the PC I add the music from but not on any of the other PC I have in my house. So I want to have a simple solution with all mymusic and apps etc in a single place that looks the same on each of my PC's?
Any ideas

Thanks for the quick reply!
No, I simply went to Itunes, Library, Music. As you mention, I can't click and drag the folder, so I click and drag a section of songs at a time, but then they are all resorted to "by artist" instead of "by title".
All I am trying to do is create space on my internal hard drive by transferring ITunes to an external hard drive (so Time Machine is not an option). Any suggestions, or is what I am trying to do not possible?

Windows Media Player 11 problems with SoundBlaster Live! Driv

My sound card stops working as soon as I try to watch a video with WMP. I have a Creative Labs SoundBlaster Li've! with a driver date of 8/29/2002. When I go to adjust audio properties, the system doesn?t recognize the card even though it is still listed in the hardware and says ?Device is working properly. I have reloaded the driver, and the card begins to work again, but as soon as I attempt to view a video, I?m back to the same place.
When I run the diagnostics included with the SoundBlaster card prior to running WMP, it passes on Hardware Detection, Wave Driver, MIDI Driver, DirectSound Driver, DirectSound3D Driver, but not on Mixer Driver, SoundFont Setting and Mixer Settings Check. After I run WMP, the only test that will pass is the Hardware Detection.
I have also tried this with the October 2002 driver set for SoundBlaster. In addition, I have downloaded the most recent driver set from Creative Labs.
I'm running Windows XP SP2.
Other programs like iTunes and various games work after I reinstall the drivers, but will not work after WMP starts. It appears that WMP is the source of the problem. Any suggestions?

Make sure you have the DRM update for the Li've drivers. I suspect WMP is cutting out the sound. Just to make sure that this is in fact the case, you could try playing back your clip with some other media player.

Soundblaster Live! CT4620 - what driver to install for Windows XP P

Please can someone help me? I've upgraded from Windows 98SE to Windows XP Pro and need to install a driver for my Soundblaster Li've! CT4620. I tried to install one driver and it says "The Windows operating system is not supported" and the install exits. I'm stuck! What should I do?
Thanks,
Nick

Hi Nick,
The CT4620 is the original SB Li've! card. You should be able to install the Li've driver unipack:
Li'veDrvUni-Pack(ENG).exe
It's available under Support> Download (just select "SB Li've!" in the product list).
Cat

Creative SoundBlaster Live! 5.1 Digital driver update - wont wo

Hello I've had this problem for as long as I can remember. I have already searched the forum in hope that I would find a solution. I didn't.
Ok, this is how it is. About two years ago I bought computer parts which I assembled together and "Creative SoundBlaster Li've! 5. Digital RETAIL PCI" was one of them.
I have tried every single driver you have under your support page and none of them will work! I always get the message:
"Setup could not detect any Sound Blaster Audio card on your system.
Please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
Setup will now exit."
Right. All drivers gives me this. I know that you guys will probably ask after the serial number now but I'm too lazy to check at the very moment and I know that the serial check will be a SB Li've! 5. digital card anyway so I don't see how that would solve this issue you are having with your, sorry to say this, outdated installs.
The card is installed correctly in the device manager as "Creative SB Li've! series". And how come I can install it from the CD but not from your internet drivers?
I'm using Windows 2000 Professional with service pack 4 by the way.
Is there a chance these installs wont work with latest service packs, that they were designed for earlier service packs and Microsoft maybe changed the way to detect hardware in later service packs?
I'd appreciate any help I can get because I really need to update my drivers, I got a small sound problem now it seems (soundeffects volume goes down and there is a bit of distortion when it's too many of the same sound playing - or when a soundeffect is to loud).
Thanks for a great card in general, I'm going to buy (I don't remember the name now) one of those new cards later on - that is suposed to be over 4 times better than the previous soundblaster cards? .

Hmm, the install extracts files but not in the current directory or in windows temp. How would I extract the content from the install file so I can patch it's
EDIT: I extracted it with winrar and I got the following files:
data.cab
data.hdr
data2.cab
Diagnose.cab
disk.id
Driver.cab
ikernel.ex_
layout.bin
PC3.cab
Setup.exe
Setup.ini
setup.inx
Wstudio.cab
I know there should have been some sort of audio folder here but I didn't find any, so I tried the program and it said patch applied and all that. I try to run setup.exe and it will still not work. Probably because I'm doing it all wrong :P.Message Edited by Ice_ on 06-5-2006 04: AM
EDIT2: Ok I got several driver files so I just extracted "Li'veDrvUni-Pack(ENG).exe" to C:\sb\ and ran the tool as you described. I could launch the install without problems. By the way, Li'veDrvUni-Pack(ENG).exe is containing the latest drivers as well right? So I dont need to do this with "Li'veDrvPack_Patch.exe" as well?
Thanks!Message Edited by Ice_ on 06-5-2006 04:5 AM

Driver for CT4660 digital I/O card - with Soundblaster Live SB0

Hi - I searched the Knowledge Base here and the Support Driver section of the Creative Labs website and nowhere can I find a driver for the Digital I/O card CT4660. I have a Soundblaster Li've SB000 and the digital I/O card together with the connector cable. Can anyone help me out or point me in the right direction? Googled the web too, but just found one other message of someone looking for the same thing with no replies posted to that thread.
Thanks and happy New Year.
Mike

ort 0) configured for buffered output. Intermittently the following error appears, "An exception 0E has occurred at address in VxD NIPALK (01) + address. This was called from address in VxD NIPALK (01) + address. It may be possible to continue normally.I've never seen this error before, but there is a newer version of the NI-DAQ driver (6.9) available for download from the NI website at:
http://digital.ni.com/softlib.nsf/current

Help I need to locate a driver for my soundblaster live 24 bit soundcard

My son has been given the following PC games for christmas:-
Command & Conquer 3,
Command & Conquer Red Alert 3,
Arma; Armed Assault,
Medal of Honour: Airborne
The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
here is it:
[url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
Good luck and Merry Christmas!!!
Message Edited by CTman on 2-26-2008 0:2 [email protected]

Looking for driver for SOUNDBLASTER LIVE 24bit & AUDIGY SE (CA0106) Ver 5.12.01.

Im unable to get my Audigy onboard sound running and need to try some/lots of drivers until it is stating AUDIGY in the hardware manager
More details: http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=23993
5.2.0.54 can anyone tell me if this is compatible? or any details/bugs etc
Message Edited by ozprostreet on 05-07-2008 05:20 PM

Anyone?

Soundblaster Live Driver is

Similar Messages

Maybe you are looking for