SoundBlaster Live! LS Not functioning proper

Howdy,
I had accidently deleted some of my drivers for my On-Board sound card, so I bought a "Creative SoundBlaster Li've LS" sound card. I installed it (including the little wire). After installing all the information from the CD, I reboot and tried my sound. I do not get any sound what-so-ever from a standard 2 speaker setup. When I plug in my 5. surround sound, I will hear the song, but it is extremely distorted and barely understandable.
) I have a 5. Surround Sound Speaker system from Altec Lansing.
2) Speakers are not the problem, I have sounds when I plug the speakers into the CD player.
Thank you,
Bryan

ZauR,
I'm not 00% sure why you are having a conflict with your PCI video card, however this has nothing to do with the fact that onboard sound can conflict with any PCI sound card. It is a common troubleshooting step to be followed.
I am done arguing this with you. This is not solving anything and the problem on this thread has been resolved. I am locking this thread.
Jeremy

Similar Messages

HT201412 my lower right screen of iphone 4 is not functioning proper . I have to press hard to make it go. and my letter "o" it not functions while typin a message. please help

My lower right screen touch
of iphone 4 is not functioning proper . I have to press hard to make it go. and my letter "o" it not functions while typin a message. please help

There is a possibility that your digitizer has malfunctioned. I had a similar problem on my iphone 3gs whereas the lower left part of my screen didnt respond to touch at all. Take your phone to an Apple store and have them fix it for you. I fixed my iphone 3gs' digitizer by replacing it myself because my phone was out of warranty, and there arent any Apple stores nearby. But you should definitely take your phone to Apple store and let them fix it for you, because in order to replace digitizer on iphone 4, you really need to be skillful when it comes to phone repairs,and attemting any repairs yourself voids your warranty. Hope I helped. Cheers mate

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

Clean-up not functioning prope

When I tried to perform a clean-up on my zen 20gb it went past 00% and eventually stopped at 553% i'm sure this can't be correct and was wondering if I should perform a format all or reload OS instead?

I know what you mean. My Microphoto froze earlier, and then couldn't rebuild the library (it stopped at 9 of 959 songs every time.) So I decided I'd try the clean up in recovery mode.
Well, apparently it's still working on cleaning up, and doing a very thorough job at.. 600% as of right now. At first I thought this maybe meants files, not percent, but I ost certainly don't have 6K+ files on my microphoto.
Oh, and it won't turn off while it's scanning. I assume this is because it would be damaging?

Form created in Muse now live and not working

I would greatly appreciate some assistance (and fast as my project is live and not functioning). Basically, I created and edited a nice website with a form in Muse, then published to BC to chop it into code, then Ftp'd the files to myself and then over to the client's servers. Everything looks great, except the form I added is not functioning. Muse chat support has told me:
Surjeet: It is automatically integrate with BC when published on BC
Surjeet: But if you want to host it on other servers then you have to make some changes on the onclick of the form.
However, he couldn't tell me what changes need to be made because
Surjeet: Unfortunately, HTML / CSS / JavaScript and Site implementation related issues are outside the scope of our support boundaries.
Then he tell me that
Surjeet: The webForm will be functionable only when published on BC.
AAACK! I really need help. Adobe shouldn't allow you to add a form if it is not going to work on client servers - they are touting this product as for designers with no tech knowledge.
Can anyone please please tell me what code or ? on the form needs to be changed, added, deleted, etc. to get it to function on my client's server? Project is due today!
Thank you in advance!

Link
Cant help without a link.
You may have modified the form to knock off severl things to make it work correctly.

My input/output port is no longer functioning. After hitting the proper buttons in the System Requirements/Sound, it still does not function.

After having my MacBook Pro for just less than a year, the input/output port is suddenly not functioning. Even after clicking the correct buttons in the System Requirements/Sound section, I cannot record through the input and listen through the output modes.

Hi Tim,
Your MBP has a one year hardware warranty on it, so I would contact AppleCare or go in to an Apple Store.

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

Satellite P300D-110 integrated webcam is not functioning properly.

Hello everyone,
as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
*How did this happen?*
You tell me. This is how it went;
* Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
* Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
To give a quick summary of the thread;
* Using Camera Assistance Software provided by Toshiba I can take pictures.
* Using Camera Assistance Software provided by Toshiba I can record sound.
* Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
* I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
* I have downloaded and isntalled the latest drivers from the Toshiba website.
* My laptop is about a week old.
I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
And if possible WITHOUT having to reinstall Windows Vista Home Premium.
I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
Sincerely,
a sad customer.

Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

Direct Show causing "A device attached to the system is not functioning"

Hello,
I've been using direct show for about a year to connect to four webcams. I have an intermittent problem where by one of the cameras (at random) will not display the live feed. This could not happen for several weeks possibly months and then suddenly the
camera dies.
I run the following bit of code and receive error code -2147024865.
IMediaControl mediaCtrl = (FilterGraph)m_filterGraph as IMediaControl;
hr = mediaCtrl.Run();
DsError.ThrowExceptionForHR(hr);
In Hex this equates to 8007001F. From doing a bit of googling I found that this means a "A device attached to the system is not functioning".
No other application uses these webcams and nothing has changed to them physically. Direct Show, seems to make this camera unusable at random times.
Has anybody else experienced this problem and over came it?
Thank you in advance,
Mike

Hi Roman,
Thank you for your reply. I'm using a Logitech webcam and this camera is used by the Logitech controller software. This allows us to control the zoom, pan, focus and camera settings whilst connected to the camera in C# application. When this problem occurs,
the webcam device still shows up in device manager and the settings of the webcam state that the device is working properly.
I thought it may of been introduced by a possible memory leak that causes the camera to not respond, or that when the application closes it would leave the camera in a unusable state.
I've contacted Logitech to ask about drivers for the webcam and they state that it uses windows plug and play drivers. These are currently up to date.
The reason I thought that it may of been introduced by direct show is because these cameras have been used before on other products but using different software, Steribar (a software tool to use the view of a webcam as a cheap barcode reader), and haven't
experienced this problem with the cameras with this software. However very intermittently the custom C# app that I have created causes this problem.
Thank you for you time.
Mike

Drop Down Menu not functioning

I'm very VERY new to dreamweaver/fireworks but have been making small changes to multipul websites for a company. They have asked me to come up with a totally new design for their primary webpage and I'm having an issue with the drop-down menu.
I'm created the menu in fireworks using the hotspot tool and it "previews" just fine in both fireworks and dreamweaver. I went through the export process in fireworks and exported the hotspots/images and html code into my primary folder for the website. I pasted the html-code in the location that I wanted on the webpage.
When I upload the page and go to view it the drop-down-menu does not function properly. I have to add an <div> after my .jpg banner for the images of the dropdown to appear. Even then the pull-down-menu does not show up properly.
*Side note* the page also loads VERY SLOWLY now, not sure why. In an attempt to start over I access the "remote view" of the webpage through dreamweaver and deleted all but the "Admin" folder which it did not allow me to delete? Did I majorly mess something up here?
I'm also attachin and image that is a screenshot of what the menu/root folder looks like in dreamweaver
www.greatermichiganpmc.org <--page
Code for drop-down:
<div id="container">
<div id="header">
    <div align="center">
      <p align="center">
        
        <img src="index-banner.jpg" width="700" height="223" /></p>
      <div id="FWTableContainer1508856550"> <img name="indexpulldown" src="indexpulldown.gif" width="699" height="32" border="0" id="indexpulldown" usemap="#m_indexpulldown" alt="" />
          <map name="m_indexpulldown" id="m_indexpulldown">
            <area shape="rect" coords="601,6,691,26" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133643_0', 'MMMenu0914133643_0',601,26,'indexpulldown');" />
            <area shape="rect" coords="503,6,593,26" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133421_1', 'MMMenu0914133421_1',503,26,'indexpulldown');" />
            <area shape="rect" coords="404,6,493,28" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133324_2', 'MMMenu0914133324_2',404,28,'indexpulldown');" />
            <area shape="rect" coords="304,6,394,26" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133237_3', 'MMMenu0914133237_3',304,26,'indexpulldown');" />
            <area shape="rect" coords="206,6,295,28" href="javascript:;" alt="" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuShowMenu('MMMenuContainer0914133022_0', 'MMMenu0914133022_0',206,28,'indexpulldown');" />
            <area shape="rect" coords="106,6,196,26" href="http://www.greatermichiganpmc.org/news.html" alt="" />
            <area shape="rect" coords="6,6,97,28" href="http://www.greatermichiganpmc.org" alt="" />
          </map>
          <div id="MMMenuContainer0914133643_0">
            <div id="MMMenu0914133643_0" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/uastar.html" id="MMMenu0914133643_0_Item_0" class="MMMIFVStyleMMMenu0914133643_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133643_0');"> UA Star </a> <a href="http://greatermichiganpmc.org/uatraining.html" id="MMMenu0914133643_0_Item_1" class="MMMIVStyleMMMenu0914133643_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133643_0');"> UA Training </a> </div>
          </div>
        <div id="MMMenuContainer0914133421_1">
            <div id="MMMenu0914133421_1" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/links.html" id="MMMenu0914133421_1_Item_0" class="MMMIFVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> Links </a> <a href="http://www.greatermichiganpmc.org/buyersguide.html" id="MMMenu0914133421_1_Item_1" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> Buyer's Guide </a> <a href="http://www.greatermichiganpmc.org/career.html" id="MMMenu0914133421_1_Item_2" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> A Career </a> <a href="http://www.greatermichiganpmc.org/training.html" id="MMMenu0914133421_1_Item_3" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> Training </a> <a href="http://www.mitripartite.com/survey.htm" id="MMMenu0914133421_1_Item_4" class="MMMIVStyleMMMenu0914133421_1" onmouseover="MM_menuOverMenuItem('MMMenu0914133421_1');"> MTC Survey </a> </div>
        </div>
        <div id="MMMenuContainer0914133324_2">
            <div id="MMMenu0914133324_2" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/officers.html" id="MMMenu0914133324_2_Item_0" class="MMMIFVStyleMMMenu0914133324_2" onmouseover="MM_menuOverMenuItem('MMMenu0914133324_2');"> Officers </a> <a href="http://www.greatermichiganpmc.org/members.html" id="MMMenu0914133324_2_Item_1" class="MMMIVStyleMMMenu0914133324_2" onmouseover="MM_menuOverMenuItem('MMMenu0914133324_2');"> Members </a> </div>
        </div>
        <div id="MMMenuContainer0914133237_3">
            <div id="MMMenu0914133237_3" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/meetings.html" id="MMMenu0914133237_3_Item_0" class="MMMIFVStyleMMMenu0914133237_3" onmouseover="MM_menuOverMenuItem('MMMenu0914133237_3');"> Meetings </a> <a href="http://www.greatermichiganpmc.org/community.html" id="MMMenu0914133237_3_Item_1" class="MMMIVStyleMMMenu0914133237_3" onmouseover="MM_menuOverMenuItem('MMMenu0914133237_3');"> Community </a> </div>
        </div>
        <div id="MMMenuContainer0914133022_0">
            <div id="MMMenu0914133022_0" onmouseout="MM_menuStartTimeout(100);" onmouseover="MM_menuResetTimeout();"> <a href="http://www.greatermichiganpmc.org/tsr.html" id="MMMenu0914133022_0_Item_0" class="MMMIFVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> TSR </a> <a href="http://www.greatermichiganpmc.org/histroy.html" id="MMMenu0914133022_0_Item_1" class="MMMIVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> History </a> <a href="http://www.greatermichiganpmc.org/staff.html" id="MMMenu0914133022_0_Item_2" class="MMMIVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> Staff </a> <a href="http://www.greatermichiganpmc.org/awards.html" id="MMMenu0914133022_0_Item_3" class="MMMIVStyleMMMenu0914133022_0" onmouseover="MM_menuOverMenuItem('MMMenu0914133022_0');"> Awards </a> </div>
        </div>
      </div>
    </div>
</div>
<div id="sidebar1">
    <h3><img src="index-side.jpg" width="200" height="581" /></h3>
</div>
Any and all help is appreciated. Thank you in advance

Firstly, the link to the imported stylesheet is wrong - it appears to be pointing to your hard drive: that needs to be fixed and if it relates to the menu, likely the reason why the menu isn't visible.
@import url("../../../../../../../../S|/All Users Documents/Graphics/Chris/Greater Michigan PMC/indexpulldown.css");
Are you working in a defined DW site? It's very important that you are - it's the way that DW keeps track of all the links and paths.
Define a site:
http://kb2.adobe.com/cps/140/tn_14028.html
Next: Those FWs exported dropdowns are atrocious, there was a reason the functionality was removed from the latest FWs and DW.   Even though a CSS version is available, it may be ok to use for protyping for certainly not for live production sites.
POP UP MENUS - why not to use them:
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
http://apptools.com/rants/jsmenu.php
http://apptools.com/rants/menus.php
There are much better ways to build a dropdown menu, one of them is the Spry Menu available in CS3 and CS4. They too, can cause issues, but at least the links throughout your site are inside the html code, not in the javascript.
Spry Menus: - already included with CS4
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS8B985763-4DFA-4415-B242-B2C 2D7DED657a.html
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt5_03.html
Better Ways to create CSS dropdown menus (user friendly and search engine friendly):
CSS Dropdown menus by Suckerfish:
http://www.htmldog.com/articles/suckerfish/dropdowns/
As for this:
*Side note* the page also loads VERY SLOWLY
now, not sure why. In an attempt to start over I access the "remote
view" of the webpage through dreamweaver and deleted all but the
"Admin" folder which it did not allow me to delete? Did I majorly mess
something up here?
I'm not really sure what you mean and which folders you deleted from where ;-)

Excel alligment is not coming proper

Hi guru
My requirement is convert spool to excel format .
i am using 'RSPO_RETURN_ABAP_SPOOLJOB' and 'SO_RAW_TO_RTF' function module and after that i loop the internal table value in one string . my problem is that excel alignment is not coming proper and all are coming in one cell . please help me i need to finish this requirement
<< Priority normalized >>
Edited by: Rob Burbank on Jan 10, 2012 12:21 PM

my code is this please provide me exact solution
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
        EXPORTING
          rqident              = gd_spool_nr                    "Spool Request Number
          first_line           = 1
        TABLES
          buffer               = it_spool_xls                            "Internal table that will have the Spool Request No data
        EXCEPTIONS
          no_such_job          = 1
          not_abap_list        = 2
          job_contains_no_data = 3
          selection_empty      = 4
          no_permission        = 5
          can_not_access       = 6
          read_error           = 7
          OTHERS               = 8.
   LOOP AT it_xls_spool.
        CONCATENATE xls_string it_xls_spool INTO xls_string.           "xls_string will have the data as one string
      ENDLOOP.
   CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
        EXPORTING
          text     = xls_string                         "String of String data type
         =_       =
        IMPORTING
          buffer   = xls_str                             "String of XString data type
        EXCEPTIONS
          failed   = 1
          OTHERS   = 2.
      IF sy-subrc <> 0.
        message 'converted not in excel' type 'E' .
      ENDIF.
pdf_content = cl_document_bcs=>xstring_to_solix( xls_str ).
but data is not coming with proper alligment please suggest me where i need to change the code.

Hotmail, only in Firefox, does not function, chrome, yes, IE, yes, but not firefox--WHY?

I have uninstalled all versions of Firefox, no matter-Hotmail loads, but when trying to open any email or part of hotmail, does not function. I have now added Chrome and IE and they have no probs with Hotmail!
So, WTF?????

It has been suggested that the Foxit Reader plug-in can cause problems with Hotmail. Try disabling it, reloading the page and see if it helps.
* [http://forums.mozillazine.org/viewtopic.php?p=11970053#p11970053 Hotmail disabled in Firefox V.12 • mozillaZine Forums]
* [[Using plugins with Firefox|How to disable plug-ins in Firefox]]
If that doesn't help,
# [[How to clear the cache|Clear the cache]].
# [[Cookies|Delete cookies]] from *.live.com.
# [[Options window - Content panel|Check that Javascript is enabled]].
# Check that Javascript is not blocked an in extension like NoScript or Adblock Plus.

USB Keyboard/Mouse do not function in Bios (Bios Change log too)

I have 1.7 and the system seems fairly stable, a few BSOD's occasionally and it normally seems to occur when the system is idle. I can work on that, but now when I boot my usb keyboard will not function for the EFI/Bios. I have a Old PS2 keyboard working for now but was hoping there is some work around that someone might now. Everything is enabled in the Bios and I even disabled, saved, re- enabled, saved.
Saving (F10) still causes the system to power down, but I can live with that.
Now for the BIOS, can we get a change log to determine what issues are being resolved with these update? I have 1.8b7 downloaded but last update I lost my Raid array so I want to see change logs before a possible rebuild.
Lastly I am used to new hardware having issues especially with OCing, but the EFI/BIOS seems extremely temperamental. First MSI board and my work is on the road a lot so I am hoping to get some of this fixed soon.
Thanks for any advice

Quote
a few BSOD's
What are the Stop: error codes? 124? 050?
Quote
Now for the BIOS, can we get a change log to determine what issues are being resolved with these update? I have 1.8b7 downloaded but last update I lost my Raid array so I want to see change logs before a possible rebuild.
https://forum-en.msi.com/index.php?topic=144655.0

Soundblaster Live X-Gamer (ct47

I don't have my original driver installation anymore.
When i downloaded the drivers from the website, it gave me the 'cannot find soundblaster hardware error'
I was able to get the card to play sound by using winzip to open the driver .exe.
However, this only allows me to have working sound. The Gameport does not function when installed this way.
Attempts to install "Creative Game Port" driver after installing the driver that makes sound work only creates a "!" entry in my device manager and does not work.
Any suggestions on how I can get it to play sound and have the gameport work?
Thanks in advance,
justin

Marc4ucb,
Test your speakers with a different audio source such as a portable CD player. Replace the cable connected to your sound card, and connect it to the test source such as a portable CD player or portable MP3 player.
Jason

Problem with DTT3500 soundset and onboard Soundblaster live! 24-bit

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster live!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster live! 5.1. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5.1 surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster live! 24-bit?
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...?
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5.1 speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster live! 24-bit is an enhanced version of the soundblaster live! 5.1? Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt0104&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
I would apreciate any help, as i'm really stuck at the moment.

does anybody use the soundblaster live! 24-bit to power a surround speaker set? or is it just impossible? (for gaming)

SoundBlaster Live! LS Not functioning proper

Similar Messages

Maybe you are looking for