Soundblaster live platinum 5.1 upgr

Hello I am new to this forum so I was hoping someone would kindly help me out. I have a soundblaster li've 5. with a creative sound card model SB0060 and has an audio extension (digital I/O) connector. Yes I know quite old stuff. I used to do a lot of recording with cubase, wavelab, etc and for various reasons drifted away from it. I am ken to start again and although I love my front panel? (li've dri've IR) so was wondering is it possible to just purchase a new soundcard that is compatible with the li've dri've IR. The reason for the swap and I assume my deduction is correct. Since I moved from Win98 to XP I have a terrible judder during music playback that is very intermittent but very annoying ?Any help out there would be very appreciated. Regards?MusicmanUK

halfnuts wrote:
Pay special attention to the replies from Creative staff as they are the most helpful.
I can appreciate sarcasm as much as the next person, but I think you should take a look at the announcement at the top of each board: "These forums are primarily intended for user interaction. Read more."
sloman - it would be strange the driver stops working once you install the driver. Did you check the mixer (when the driver is installed)? You didn't mention which options are set there, but as long as this is all selected it should work. Do the headphones work on the dri've then? Can you record from the input on the back of the card?
Cat

Similar Messages

Soundblaster live platinum 5.1 sound prob

I have Soundblaster li've platinum 5.. I have just formatted and restored all my software.
I can not get any sound from the inputs from the front panal of my sound card.
I am using XP. If I uninstall the software for sound card i can then get sound through an instrument plugged into the dual line in/mic socket. But as soon as i reistall the software it goes.
I have downloaded the patch from the site, all updates for xp service packs are installed.
I have installed the sound card then service pack and then vice versa but still nothing.
HELP its driving me somewhat mad.
Andy suggestions will be greatly recieved.
cheers
sloman

halfnuts wrote:
Pay special attention to the replies from Creative staff as they are the most helpful.
I can appreciate sarcasm as much as the next person, but I think you should take a look at the announcement at the top of each board: "These forums are primarily intended for user interaction. Read more."
sloman - it would be strange the driver stops working once you install the driver. Did you check the mixer (when the driver is installed)? You didn't mention which options are set there, but as long as this is all selected it should work. Do the headphones work on the dri've then? Can you record from the input on the back of the card?
Cat

Soundblaster Live Platinum on Win 98 / SB16 enumeration hang

I removed my Platinum card from an old computer to place in a Vaio, but they turned out to be imcompatible...so I went to replace it in the old computer. When I tried to reinstall, the plug & play of Win98 keeps getting snagged during start up while "loading SB6 enumeration". The software seems to be up and running with that one flaw...once the soundcard is placed in the PCI slot and enabled, the computer freezes.
Any hints?
Thanks,
Vance

Right, we've tried some more things now so will update on the problem. We've disconnected the li've dri've, which made no difference at all. We've swapped sound cards. I now have the Platinum card in my system and it's working perfectly. The Soundblaster card that I used to have on the MSI motherboard is now back on my husband's PC (where it was originally installed with no sound problems) and we're getting the scratchy, screeching problem. The only thing we can think of now is a software conflict somewhere...any ideas?

HELP soundblaster live platinum replacement installation

hello i have recently formatted my computer forgetting that i had damaged my installation cd for my soundblaster li've platinum and im wondering where to get a replacement. i have tried drivers from creative but it still doesnt work, i have had it for 7 years, when i first had it it was on win 98 but then i went on to xp and most of the stuff went on and i updated the rest and it worked with no probs but now nothing (it had adobe reader, proddy parrot, keytar, mixer etc.). please helpthanx

Search for badboy's installation ISO thread and you'll find a link to where he's getting the files hosted now.
You want the Audigy /SBLi've5. cd ISO. That includes the latest stuff for the Li've including the full RemoteCenter installation. The SBLi've Unipack download from Creative has less models of the card in the inf, doesn't include the 254 patch for the Li'veDri've and the other downloads (with the exception of PlayCenter) won't install unless a previous version is already installed (they're only updates). The cd I mentioned has the whole package you need. It is an ISO image so you just burn it to a cdr with Nero, the free IMGBURN, or some other cd mastering software.
It is also available for purchase by calling Creative.
The original cd you lost includes Windows 2000's Li'veWare which needed to be patched for XP with a seperate download that Creative no longer offers. It may still be on driverguide.com. I think it was called SBLi'veXPUpdate.exe or something like that. There was an older version only for the 4. cards and a newer one for all the cards.
The other stuff you mentioned was on other cd's included with the retail Platinum box. Most of that is outdated now anyway and some of it can conflict with Windows. I remember ProdyParrot would interfere when I still had a dialup connection. It would change something so I could no longer disconnect from the icon. It would be greyed out. I don't know whether the CubaseVST 4 Creative Edition works on XPSP2 or not. The new cd I mentioned will not contain these extras anyway.
I used to enjoy that stupid parrot and Dr. Sbatso!

SoundBlaster Live Platinum x XP S

Hi,
My soundcard stops to work after I installed the SP2. Already did everything that was mentioned here and nothing.
My doubt is about the driver, only say about upgrade, where I find the SBLW-XPWEB-W3-US?! I used this 2 drivers and another find driversguide but nothing works.
I really need help
TIA
Iassa

Hi,
My soundcard stops to work after I installed the SP2. Already did everything that was mentioned here and nothing.
My doubt is about the driver, only say about upgrade, where I find the SBLW-XPWEB-W3-US?! I used this 2 drivers and another find driversguide but nothing works.
I really need help
TIA
Iassa

Soundblaster live platinum Recorder volume way too

i've been using this soundcard for awhile and i've never had a problem with it until recently when i tried to record something and it said my sound card wasnt in so i plugged it back in and reinstalled the drivers and i have sound but when i try to record u cant hear anything and i've adjusted the volumes and i've gone and made sure that i went to volume control and checked everything out and everything is set right.. what should i do?

You could try a cleansweep of the soundcard (removing the drivers software completely, then reinstalling):
http://us.creative.com/support/kb/article.asp?l=2&sid=72
Once the card is up and running again, check the mixer settings to ensure the microphone is selected as the recording source, and that you've adjusted the volume. Does it record the signal? If it's recorded, but you can't hear it while you're recording, then check the micrphone isn't muted.
Cat

Problem with DTT3500 soundset and onboard Soundblaster live! 24-bit

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster live!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster live! 5.1. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5.1 surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster live! 24-bit?
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...?
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5.1 speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster live! 24-bit is an enhanced version of the soundblaster live! 5.1? Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt0104&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
I would apreciate any help, as i'm really stuck at the moment.

does anybody use the soundblaster live! 24-bit to power a surround speaker set? or is it just impossible? (for gaming)

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

ALsa + Soundblaster Live 5.1 + 5.1 Sound

HI there!
I finally bought a 5.1 Surround System today, but I have a major problem. Only the Subwoofer, Fron-Left- and Front-Right-Speakers are working, no Sound from Center, Surround-Left- and Surround-Right-Speakers
Here is my modules.conf, Alsa-Page says it should work:
# module : ALSA
alias char-major-116 snd
alias snd-card-0 snd-emu10k1 snd_cards_limit=1
options snd-emu10k1 snd_index=0 snd_id="EMU10K1" snd_extout=0x1f0f
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd-pcm-oss snd_dsp_map=0 snd_adsp_map=3
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
And now my .asounrc
pcm.emu10k1 {
type hw
card 0
ctl.emu10k1 {
type hw
card 0
I tried so much already and nothing works
I played around with alsamixer and I finally got the Center-Speaker to work, but it just works instead of the Front-Left-Speaker. It really sucks.
Maybe you can help me, it would be nice.

i had some same issues , but i have soundblaster live 24-bit , but disabling the onboard bios didnt do anything for me , so i had to look for some ways to figure out how to fix this , * love thy google.com/linux *
bash# speaker-test -c6 -t2 ( this is to test your surround speakers , providing your using ca0106 driver such as myself )
if you only get a few channels you could also make your ~/.asoundrc file with some goodies in it ill post a few examples i have found
pcm.ca0106 {
type hw
card 0
ctl.ca0106 {
type hw
card 0
ctl.!default {
type hw
card 0
pcm.!default {
type hw
card 0
pcm.!default {
type plug
slave.pcm "dout"
pcm.dout {
type dmix
ipc_key 1025
slave {
pcm "hw:0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
ctl.dout {
type hw
card 0
pcm.duplicate {
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
pcm.dmixs51 {
type dmix
ipc_key 1024
slave {
pcm "hw:0,1"
rate 48000
channels 6
period_time 0
period_size 1024
buffer_time 0
buffer_size 4096
pcm.!default {
type plug
slave.pcm "dmixs51"
pcm.duplicate {
type plug
slave.pcm "dmixs51"
slave.channels 6
route_policy duplicate
Now dont forget to run alsaconf before you do this and make sure you have 5.1 surround speakers for this as well
any other questions about the soundblaster live 24-bit , contact me and ill try to help if i can , ( i have been reading about this for days )

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

SoundBlaster Live! 24 and Vista - Deteriorating Sound Qual

I've recently upgraded to Vista Business, and my system informs me that except for the drivers for an ancient scanner all is working properly.
When playing music (using a Creative SB Li've 24bit card with the most recent driver installed), all starts off well (in fact playback is better than under XP Pro) but the sound quality starts to deteriorate badly, especially when I open a browser. Quite often the browser itself seems to freeze.
I have 3Gb RAM, with a 3.60Ghz P4 processor.
Task Manager tells me that often I am running at 00% of CPU capacity, though the problem seems to occur at lower usage too.
I've checked everything I know to check but just can't seem to get to the root of the problem. Can anyone suggest anything I should be looking at?

Sadly no real progress.
I simply pulled the Soundblaster Live 24 out of the computer and am using the onboard sound instead which at least for me Arch recognized just fine.
I haven't been able to get any suggestions for why the Soundblaster was not working, but I am going to try another sound card a friend lent me and see what happens.

Soundblaster audigy platinum jack panel compatibility with audigy 2 or audigy 2

Can I use a Soundblaster audigy platinum dri've (the front case jack panel) with an audigy 2 or audigy 2 zs sound card? Is it compatible? This is so I don't have to by a platinum version of the audigy 2 or audigy 2zs and spend the money on another dri've panel just to upgrade the sound card.

As both the Audigy and Audigy 2 lines report they are compatible with WinXP, is there any reason I wouldn't be able to use my Audigy Platinum system I bought in 200 with a suped up new Dell Dimention desktop system I just bought? I guess the question behind the question is, what's the difference between the Audigy and Audigy 2 besides just the parts not being compatible with each other and the true bit thing fixed? Thanks!
Message Edited by sseres on <SPAN class=date_text>03-26-2005 <SPAN class=time_text>03:5 PM
Message Edited by sseres on 03-28-2005 07:06 AM

Problems installing soundblaster live

I just bought a kt4 ultra I am trying to install a soundblaster live sound card, I go to the bios and disable the audio on board option, but when windows xp starts it recognizes the sound card but then it hangs, any help to fix this is much appretiated. thanks

try pci 4

Soundblaster Audigy Platinum EX + Xbox 360 = Surrou

Hi everyone, this is my first post on the forum, so don't shoot me if i ask something obvious. Also I am sorry for my bad English, please keep in mind that I'm not a nati've speaker.
So here comes my question:
This is the setup I am thinking about:
-Xbox 360 (playing a game with Dolby Digital 5. surround encoding.)
--Connection: digital optical audio cable (Toslink)
-Connected to: The optical input on the external module of my Soundblaster Audigy Platinum EX
<img height="37[/img] src="http://img88.imageshack.us/img88/7660/dri'vefrontor.jpg" width="500" alt="">
-This card is installed on a PC with an Athlon XP 3000+, 52mb ram, 60Gb harddisk,... A recent pc in other words, running Windows XP Media Center Edition.
-[url="http://www.creative.com/products/product.asp?category=4&subcategory=25&product=4090 &nav=0">Creative InspireT6060[/url] speakerset, connected to the sound card using the analog connectors:
<img border="0" height="73" src="http://img237.imageshack.us/img237/804/bracketpe9.jpg" width="505" alt="">
Will I be able to hear surround sound from the xbox game trough my analog speakers this way (When the PC is turned on offcourse.), or will i get (upmixed) stereo audio, or even worse: no sound at all?
I hope someone can answer this question,
Greets,
FORZA M

That's correct in your case (connecting to the expansion bay) the soundcard will decode the DolbyDigital and send it to the analog speakers.
For me it is veird that you want to us a whole PC to do that - energy consumption, heat, space occupied (you will need a separate monitor for PC and a big-screen TV for XBox 360).
Another solution would be an external decoder - like a digital receiver or Creative's DDTS-00: http://www.creative.com/products/pro...6&product=9468
Message Edited by SoNic2367 on 0-2-2006 :08 AM

No Support for SoundBlaster Live! Platinum

I own a SoundBlaster Li've! Platinum 5. and recently discovered that it is the only piece of hardware not supported by Creative on Windows Vista (No Intended Development).
It's Top product has no intended development for Vista. However, even the much cheaper SoundBlaster Surrond 5. has intended development. Am I missing something here?
I replaced my old Windows XP Pro with the newer Windows Vista. All the hardware components of my PC have available for download, drivers and or software for Windows Vista, All but one, the most expensi've component, my much loved SoundBlaster Li've! Platinum 5..
I am not complaining about the quality of the product, as I like to reinforce is outstanding. I am a music lover, which is the reason why I bought the SoundBlaster Li've! Platinum 5.. With the Li've! interface, I can connect all my analog equipment (VHS, Tape deck and Turntable) as well as use the remote control to control the PC. I changed the batteries of the remote last month, for the first time since I bought the PC. Impressi've, as most makers just use cheaper batteries which only last a month or so.
My PC is only 3 years old. A P4 3Ghz with dual channel ram is still a fast machine.
The Radeon 9600 graphics card is supported, The Leadtek Digital tv tuner is supported, Even the cheaper onboard sound (Realtek 7.), which I never use, is supported.
Since this SoundBlaster Li've! Platinum 5. was the most expensi've of all SoundBlaster models, it does not seem right that Creative only supports the cheaper, everyday models.
It does send the wrong message to consumers. I tells the consumer not to buy Creative's expensi've models and instead buy the cheaper models. Am I the only customer with this problem?
Every single owner of this great model won't be able to update their machines to Windows Vista. Please Support this great model, Creative's own Rolls-Royce.
Message Edited by webpet on 09-29-20070:42 AM
Message Edited by webpet on 09-29-20070:44 AM
Message Edited by webpet on 09-29-20070:56 AM
Message Edited by webpet on 09-29-20070:58 AM

I did not use the files available for download from this site. The original disks that came with my boards contained software for Windows 2000.When I upgraded to Windows XP, I rang the local?office of Creative and arranged to have the Creative?software for Windows XP?deli'vered by mail. I received a disc with all drivers for both boards and the remote control. It has the only way that I got it going on XP. The irony of buying expensi've, good quality boards is that the hardware outli'ves the operating system that it was built for originally. And to reward customer loyality, the hardware makers, stop supporting their own?flagship models in the hope that we will eventually buy their latest, more expensi've products, which in most cases is just a marketing exercise?at re-naming old?products, while increasing the prices of product lines which have poor customer demand. How many?Audigy 7. models have they been so far?99.5% of customers can not tell a SoundBlaster Li've Platinum 5. from an Audigy 7., based solely on hearing alone, since?both cards?have such similiar real world performances.
??Message Edited by webpet on 0-06-200705:3 PM

Soundblaster live platinum 5.1 upgr

Similar Messages

Maybe you are looking for