Soundblaster X-Fi Sorround 5.1 (USB) and Sorround Sound via S/PDIF?

Hi,
I use a X-Fi XtremeMusic with the DD / DTS Connect Pack in my PC for sorround sound over S/PDIF in Music/Games/etc. That works like a charme and I have no problems at all (thanks do daniel_k )
Recently I purchased a new laptop and liked the idea of connecting my sorround system with it too, so I looked around and purchased a "Soundblaster X-Fi Sorround 5.". Sadly the DD/DTS Pack does not install for this device...
Now, as far as I know, the only real sorround sound I will get would be from audio signals that are in the correct format (that is: movies)
I guess I'm kind of f****d right now.. Is there any workaround for this? The only thing I really want is to play games on my sorround system via S/PDIF. I *could* connect it directly to my speakers, but that would end in a cable mess... and would kind of make my whole audio setup pointless.
If anyone knows some other USB soundcard which can "convert" EAX/other Sorround Signals to Dolby Digital..shoot Though I'd like to stick with creative if possible.
If not...well, I can still send it back to the merchant. :/
My hardware if it helps:
- Teufel Concept-E Magnum (Analog sorround speakers)
- Teufel DecoderStation 3 (decodes DD/DTS and stuff to an analog signal for the speakers)

Originally Posted by Wildcopper
Just as I suspected, you didn't intend to help here.
There are many cards build with the Via EnvyHD codec/chip for instance, among which high quality Terratec ones, which have SAP without any HDMI output.
Check the Via site if you don't trust me (and the Terratec one).
SAP does NOT require HDMI. You are talking about apples and oranges here, you don't even know what SAP is. Please, let knowledgeable people post instead of trying to sound smart when you know nothing.
EDIT: Oh, and not to mention... even if those are "motherboard codecs", as you say... they are still SAP certified by Cyberlink and can output full HD sound without downsampling, and they do NOT require an HDMI output. So now maybe you will let people who know what they are talking about post instead of posting your ignorant nonsense.
Haha, he gets mad when he gets schooled.
Don't get angry at me, it's not my fault if you don't know the difference between onboard audio and a sound card.
It's PAP (protected audio path), not SAP. SAP is secondary audio programming, something entirely different.
PAP doesn't require HDMI, but I've yet to see a sound card that supports PAP but doesn't feature an HDMI output (so my point about needing a sound card with HDMI still stands). If you had read my earlier edit of post #2 you would see that I've already addressed the motherboard/HDMI issue.
List these sound cards you speak of, I still don't see any specific models listed.

Similar Messages

  • Connecting USB and another computer via wireless

    Can I connect the printer to one computer via USB and another via wireless?
    This question was solved.
    View Solution.

    photonics wrote:
    Can I connect the printer to one computer via USB and another via wireless?
    Hi,
    Yes, but when sending 2 print jobs from 2 computers at the same time, the wreless job will fail. In many case it will recover itself but sometimes it can't.
    Regars.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Lenovo N500 NS74APB and corrupted sound via HDMI

    Hello. I have connected the laptop to TV LCD (Philips PFL7403D/12) with HDMI cable and I noticed corrupted sound. There are noises (crackles) and vanishing sound for seconds. Also when i.e. moving the window between the screens, the crackles occure. On internal speakers the sound is correct. What can be the problem? Is it laptop, TV or HDMI cable, which causes the problems?

    I also use the N500 modell (747) and want to watch videos, I have problems with the sound, too.
    I have connected the notebook with a HDTV projector, resolution 1920 x 1200,  via HDMI cable.   
    The screen of the notebook is dark.
    Problem: I can hear nothing, the sound from the movie cannot get out from the notebook by the audio front connector.
    Question: How can I catch the sound? Any ideas?
    Thanks

  • Mimo Monitor via USB and additional monitor via mini-display?

    Hi,
    I currently have a 2009 MBP, with a second monitor I attach via the mini-display port. I'm thinking of adding a USB monitor like this one - http://www.mimomonitors.com/products/imo-pivot-touch
    Will the MBP/OS X support this additional screen?

    I think this question might best be addressed to the makers of the monitor. I imagine they must have tested it with MBPs, and perhaps also with additional monitors.
    Just out of curiosity, what do you plan to use the tiny monitor for? Its screen is even smaller than the 1984 128K Mac's, though its resolution is slightly higher.

  • Scratching noise while using usb and internal sound simultaneous

    Hey,
    I am using a new usb soundcard and my inernal sound, to
    work with virtual dj. I played one song on the card and wanted
    to listen to the other using my headphones. Everytime I use both
    at the same time, I have a really loud scratching noise.
    Also if I am not using the external soundcard.
    Its working on my friends mac.
    please help :/
    kind regards
    Phillipe

    The problem is the same with AC adapter plugged in or without it.
    It's quite complicated to check the screws now - they are closed with the special stickers of the service center, if i'll remove those stickers i think the warranty terms will be violated and the warranty will dissapear.
    If there would be some way to check serial number of the motherboard was installed first i could come to those guys with this information and ask to open the cover together with me and to check the numbers if they are the same.
    I agree, maybe i should give it to another service, there are 2 different official services in my city. I just think it is a bit wront to simply let go that 1.5 months i could not use the item i've paid for about 1000 usd and nothing was done at all.

  • Movie too large via imovie and no sound via idvd.

    Help! I have a movie on a minidv tape that is one hour and 21 minutes long.
    This is a very important tape and I dont want to delete any of it.
    I don't understand why I can't create a dvd (which can hold a 2 hour movie).
    If I use idvd it captures the video but there is no sound.
    If I download it via imovie, then try to create a dvd, it tells me that the movie
    is too large. How can it be too large if the movie is less than 2 hours and should be able to fit on the dvd.
    Can anyone help this beginner. (I just bought this g5 yesterday).

    Hi
    iDVD 6 should be able to make a DVD disk with 60 min or 120 min movie +
    menu.
    Can it be so that Your menu are to complex (or when added together results
    in more than 120 min)
    Sounds can be tricky and iDVD can count in sounds that You thought be out-
    side Your movie (stretching out after the video ended). If So re do the sound
    part of Your movie and be carefull that no audio cont after the movie is ended.
    In iDVD: (strang but it is like this)
    Best Quality is for movies + menus more than 60 min and less than 120
    Best Performances for movies + menu less than 60 min.
    Yours Bengt W

  • No bass and mids sound on left speaker?

    On Vista 64 I get no bass and mids sound via the left inbuild speaker with whatever Realtek driver I try (upto R2.15). No such problem on OS X and no problem via headphones out.
    Seems like a driver bug to me, but I'd like to get feedback from other users.
    Message was edited by: T1mur

    Hi,
    Got the same Problem with a MacBook unibody and under Win XP or Vista (tried both). Tried every update I could get my hands on, but nothing works. Did You got any clue what it could be? I need some advice since apple don't want to help since it is a "windows related" problem.
    Any ideas so far?
    Greetings
    Daniel

  • I have no mouse or keyboard. I have tried USB and wireless. Help?

    How can I get back control of my commuter?  Cursor floats with mouse, but no clicking.  I have used USB and wireless mouses and keyboards. Keyboard will "wake" but no other function . 2011 iMac 27. what can I do?

    These are the instructions:
    http://support.apple.com/kb/PH3878?viewlocale=en_US
    Where does the problem occur?  What happens?
    Ciao,

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • 4s Hotspot tethering only works with USB and BT but not with wifi

    Hi,
    XP sp3 - iPhone 4s with ios 5.0.1 - on Three one plan
    Tethering with wifi works to a friends Samsung phone, wifi on the pc confirmed working with the apple store wifi, tethering with USB and BT works with good connection speeds on my laptop but when i try to tether with wifi it connects to the laptop at 54mbps and all appears well, even claims to have received a small amount of data packets, but no data comes to any browser. The iPhone reports 1 connection to the hotspot and stays connected with a non-pulsing blue bar after the first minute.
    In the PC i have tried this http://windows.microsoft.com/en-US/windows7/Change-the-order-of-network-protocol -bindings
    I've deleted my firewall (zone alarm) completely and turned off windows firewall to go naked surfing for a second even though they don't cause a problem with USB tethering, makes no difference
    I've deleted the network connection numerous times
    "repaired" connection
    dissabled and enabled the wifi
    turned off the wireless with a hardware switch and on again
    disabled bluetooth
    rebooted many times
    reinstalled itunes (latest)
    loads more things i can't remember
    This is causing me a nightmare. I've been through everything i can find online, been to the Apple store genius bar (genius appeared to have sub zero knowledge / interest as it involved a MS machine), been to a Three shop (legally not allowed to touch my PC apparently) and been to a Sony shop (laptop make, not their fault if my iphone doesn't work). All very frustrating.
    Please help if you can! Any suggestion will be tried unless it involves sledge hammers or lakes, and only then for a few more days at most.

    Turned off bluetooth on phone, turned off hotspot and on again, phone asked if i wanted to turn on bluetooth or go with USB and wifi only, said usb/wifi only. Still nothing. Rebooted PC and iphone. Turned on hotspot, pc seemlessly connects to network, still no data comes.
    One odd thing is zone alarm asks me to "select a security zone for the wireless network at ip address: *******.0" every time and doesn't seem to remember the setting over sessions. When i get the status of the connection the ip address is *****.2 and default gateway is same ********.1 Not sure if that's anything.
    Also getting a javascript error about an undefinded component (trustcheckermozilla) since i updated zonealarm but as i said even completely uninstalling zonealarm made no difference. I'll update firefox as well but tried with IE and still no data.

  • 20" Cinema display with USB and firewire ports not working

    I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
    Any help please

    Verify that the display’s USB and FireWire cables are firmly plugged in to the
    computer. Do they show in your profiler?
    Try different ports in the computer.
    Verify that your computer ports are working with other known problem free device.

  • External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

    Hi
    How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
    Is there a DVI adaptor already for Thunderbolt?
    Thanks,
    JFR

    The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

  • MBPro w/Mini DisplayPort to Cinema Display w/only USB and Firewire ports?

    I've searched the threads for something that will explain what kind of cable I need to use my Cinema Display with my MacBook Pro, and I'm not finding anything. The MacBook Pro has the Mini DisplayPort for video out, and the Cinema Display's only ports are two USB and two FireWire.
    All of the video cables I've seen in the online Apple store are either Mini DisplayPort to DVI or Mini DisplayPort to VGA, neither of which would work. Tech support told me that the computer and the display are compatible -- can anyone tell me which cable I need?

    I have been using the display for several years, connected to my G4 PPC Mac Pro. Now that I have a new MacBook Pro, I was thinking of getting rid of the tower and simply using the laptop.
    The cord coming out of the back of the display is connected to the tower with both the DVI plug and two USB plugs. It didn't occur to me to look on that cord because my understanding was that there was a port on the display itself, and I always think of that cord as simply a power cord.
    I understand getting a DVI-to-Mini DisplayPort converter cable, but the Cinema Display is apparently powered by the Mac Pro tower. Would a laptop be able to power the Cinema Display? And would I have to connect both USB plugs to the laptop? That would take up both of the MacBook Pro's USB ports.

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

  • HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

    I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help!  There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

    Right click on your device icon on the left pane of iTunes and click on transfer pur....

Maybe you are looking for