Soundblaster X-fi Xtreme Audio and ALch

I bought a Soundblaster X-fi Xtreme Audio soundcard to go with my new computer as I have always used Creative and have been impressed by them. However, in Vista, my rear speakers do not seem to work. I did some research and found that ALchemy was what I needed, but I cannot get this to install. It gives me the error message that my card isnt supported. Is there any workaround for this? I feel pretty miffed having an X-Fi card and being excluded from proper sound in Vista.

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

Similar Messages

  • SoundBlaster X-Fi Xtreme Audio PCI-Express and XFX 9800GT graphics c

    Hi
    I have just bought a SoundBlaster X-Fi Xtreme Audio PCI-Express card and looked at the motherboard where I have a XFX 9800GT graphics card installed and noticed the PCI-E slot where it attatches to the motherboard is right next to the graphics card and I am concerned it may cause air flow ventilation problems for the fan on the graphics card. The gap is about 2 mm.
    .Does anyone think think this may cause the graphics card problems?
    2. Is there an adapter/extention?lead that can be?connected to the PCI-E slot so I can attatch?the X-Fi Extreme card so I can move it away from the graphics card ?
    Any ideas on this much appreciated.
    Mack

    The only way your going to know the answer to is by measuring the cards tempds before and after installing the sound card.
    Graphic cards run with certain temp limits, and I guess there must be one for yours.
    No idea on 2...all google throws up is "PCI Express to PCI Adapter".

  • No 6.1 channel speakers option with soundblaster x-fi xtreme audio

    Here is my problem: I have a 6.1 channel speakers and a yamaha receiver, but my computer doesn't show 6.1 configuration, and neither does the creative software. Both control panel and creative software only have 5.1 and 7.1. When I use my speakers with my dvd player everything works just fine. My soundcard is the soundblast x-fi xtreme audio pci, and I have windows XP. Does anybody know what's going on?

    6.1 isn't really a common speaker configuration so I doubt that many sound cards discretely support it. I'm assuming that the only way to get 6.1 audio is from a movie with a Dolby or DTS -encoded track via SPDIF or letting the receiver upmix 5.1 input into the rear mono channel.
    How are you connecting the sound card to the receiver? Are you using SPDIF or direct analog connections? If watching DVD movies, I'd recommend SPDIF, provided your DVD software supports it, you should be able to send a 6.1 encoded stream over SPDIF to the receiver, but for everything else I'd recommend the direct 5.1 analog connections, set your sound card to 5.1 and then let the receiver upmix to the rear channel if you so desire to use that feature.

  • Soundblaster X-fi xtreme audio icon used for equalizer.

    I have bout the sound blaster x-fi xtreme audio soundcard and the software is installed but there is no icon in the taskar and i cannot find the graphic equalizer. I am using vista, is this the problem?

    ;Re: Soundblaster X-fi xtreme audio icon used for equalizer.O .Go to the Start Menu on the Windows Desktop
    2.now look for the Creative Sound Blaster X-Fi Folder
    3.look for the Creative Volume Panel and click it on
    4.after you click it on , it should appear in your task tray
    5.form your task tray click on the icon, that will open it up the Enterainment Mode
    6.form there all of your controls are there, like, EQ. Bass, X-FI CMSS, EAX, X-FI Crystarlizer, Mixer, Speakers, imput, output
    Message Edited by denb45 on 0-04-2009 0:28 [email protected]

  • SoundBlaster X-FI Xtreme Audio: short freeze / dropouts

    hi,
    my problem is:
    from time to time my audio playback stops and whatever's coming out of my speakers at that point stopps for half a second or so and then continues as it should. video output and key/mouse input freezes while this happens.
    it happens during regular working and in games.
    it's annoying and I don't know what causes this problem. so I don't know how to fix it.
    specs:
    Soundblaster X-FI Xtreme Audio PCI? driver version 5.2..62
    Windows XP SP3 and latest fixes
    Core2Quad Q6600
    3 GB DDR2-RAM
    GA EP-35 DS3
    GeForce 8800GT PCIe
    TP Link WiFi PCI
    anything that might help would be nice!

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Creative soundblaster x-fi xtreme audio PROB

    Hello!
    Ive just bought a ceati've soundblaster x-fi xtreme audio some days ago but it dosent work properly.
    I bought a ( http://www.clasohlson.se/Product/Product.aspx?id=383530 ) becouse i wanted to connect my PC to my reci'ver but i cant choose Spdif in the console launcer.
    -It just says unknown or no signal in the Digital I/O menu.
    What am i doing wrong?
    Help!

    The Digital I/O jack on the Xtreme Audio soundcard isn't an optical out jack so you can't use an optical cable directly with the card. If your receiver has coaxial jack, you can get a 3.5mm minijack to coaxial cable to work with the soundcard.
    JasonMessage Edited by Jason-CL on 04-08-2007 02:6 AM

  • Do SoundBlaster X-Fi Xtreme Audio support O2ja

    The sound will be weird when playing some songs. Etc song :Identity Part 2 Hard
    Operating system : Windows XP Pro SP2
    Speaker : Altec Lansing Vs42
    Motherboard : Asus P4V800-X
    Soundblaster Driver : .4.78
    P.S : o2jam is a music game, more information visit www.o2jam.com.my
    Message Edited by frey88 on 03-07-2008 04:24 AMMessage Edited by frey88 on 03-07-2008 04:25 AM

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Problem with SoundBlaster X-Fi Xtreme Audio Card Installat

    I just completed installation of my X-Fi Xtreme Audio card for PCI express slot. I followed instructions and cancelled the prompt for audio drivers (by the hardware wizard) and installed via the Creative Labs CD. The installation went well and the card appears to be
    functioning normally. My problem is that whenever I boot up the computer, the hardware wizard keeps discovering my card as new hardware and prompting me for a driver. I have been cancelling each time, but the last time I put in the CD, and had it search for the driver in the Audio/Drivers/driver/WinXP/bin, but it didn't seem to be able to locate the driver to satisfy itself.
    What should I do (besides turning off the hardware wizard) to end this cycle of "new hardware found" episodes every time I boot.
    I hope that someone can help with this.
    ps: I would have liked to speak briefly with a Creative Tech Support person, but they seem to have conveniently left any telephone contact numbers off of their website, so I must depend on your help. Thanks.

    Hi,
    Please check the "Support" folder on your installation CD for Customer Support contact details.

  • SoundBlaster X-Fi Xtreme Audio Notebook connections to speake

    Was wondering if anyone out there could tell me something? i have the creative S750 Gigaworks 7. surround sound speakers. i have just purchased the X-Fi Xtreme audio notebook card with the surround sound connection piece. on my sub there are four ports: Green, orange, white and black. Now on the other end of that very same cable there are only three, the typical Black, Green and Orange that i have used on my desktop for my 7. surround sound needs. My question is, where do i get this cable with both ends having all four colors to connect into my external speakers dock? if anyone can help me on this I would be greatly appreciati've. Thanks.........

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Soundblaster X-FI Xtreme Audio rear speakers won't wo

    have an XP PS2 64 and the driver is ?5.2..68 dated 5/8/2007
    front L+R and Center work.... the rear speakers just have a faint humm or buzz
    when i did the?driver update it installed this 5.2..620 dated 9/25/2007
    this update made it terrible, no center sound and the 2 front were scratchy,skippy,crackly....still no rear speakers...settings don't do anything
    found this update Creative Sound Blaster X-Fi Xtreme Audio Pack .04.0078 (40.7 MB) [color="#222222">4 Oct 07
    [color="#222222">it wouldn't let me install this update, said a more update driver is already installed
    [color="#222222">after the st install and update i couldn't get the rear speakers to work.....system volume,conf,xfi controls panel etc....nothing worked
    [color="#222222">can someone tell me which driver will get the surround sound to at least work
    [color="#222222">my eyes are starting to bleed from all the reading........follow a thread only to find 5min later that it didn't work or the results weren't posted
    [color="#222222">disappointed with the lack of support from creative,the?video card i installed took 5min and the sound card has 5hrs of reading with no end in site
    [color="#222222">help please,point me in the right direction or a link that would solve my problem

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • Vista 64 - X-fi Xtreme Audio and Fatal1ty headset problem

    Hi All,
    I bought a Xtreme Audio soundcard today, and found a problem.
    When I connect my headset with the front connection on my PC -> no problem
    when I connect my microphone with the front connection on my PC -> no problem, mic is working.
    When I connect them both, the microphone isn't working.
    To fix it, I have to disconnect my headset
    Is this a known issue ?
    Or is there someone who can help me ?
    regards,
    Corn

    *second bump*

  • X-Fi Xtreme Audio and no sound

    This is really getting annoying. I had a X-Fi Fatality FPS before (which had no optical on the back), and then i bought a X-Fi Xtreme Audio.. but.. The mic just doesnt want to work. I connect the mic jack to the only input there is - where the mic icon is aswell - and.. nothing.
    The mic is enabled in windows, but it sees the input as Line-In, and not microphone!
    Im using this driver: XFXA_PCDRV_LB__04_0000
    How do i get this working? (The mic isnt broken)

    Got it fixed. The newest driver supplied by Creative, doesnt have the "Creative Console Launcher" - which means you cant switch the mode of the FlexiJack.
    Good job Creative.........................

  • X-Fi Xtreme Audio and optical in (win

    hey, i bought an x-fi xtreme audio specifically so i could hook up my xbox to my computer speakers through my sound card via an optical cable.
    I hooked everything up, but i dont see any option in audioconsole to let me have my computer recieve audio through the optical input, decode it, and output it through my speakers.
    I hear theres supposed to be some sort of digital i/o tab, but there is none.
    these?are the tabs?i?have?in audioconsole:
    X-Fi Crystalizer | Headphone detection | performance | restore defaults | device information | speakers | eax efefcts | X-Fi CMSS-3D?
    any?help?on?this?would be greatly appreciated.

    i found a simple workaround for my problem.
    I uninstalled all the creative drivers and software, then disabled the card from teh hardware menu. i enabled onboard sound in teh bios and installed the drivers that were on my motherboard disc, and the line in worked fine right off the bat.
    im?a long?time?customer?of creative ever since my?first sound?blaster 6?and?i?would?have sworn by?all?their?products, but?the?last tow sound cards?i've gotten from them,?the?audigy?4?and?this xfi?have given?me?nothing but problems. ?now i see what theyre doing, not supporting windows xp anymore, and im?now done?with creative for good.
    bye.
    Message Edited by DavyC42 on 05-4-2008 08:26 AM

  • X-Fi Xtreme Audio and A

    Hi. Does Xtreme Audio support Creative ASIO drivers for low latency recording?

    Never seen mentioned it would ... asio4all driver should work w/ this model too.
    jutapa

  • XFI PCIe Xtrem Audio and Vista 64 b

    I want to ask you guys a question, worked ok With the 4Gb memory On Vista 32 all are good, this card are a little crippled from Creative , but i dont complained. This card sound just like Extrem Audio PCI, or like SB li've 24 or AudigySE with modded into Daniel driver Xtrem Audio.

    Hi,
    This forum is intended for user interaction. Although the Forum is moderated by Creative employees who may provide answers to some questions, the moderators onboard are not here to provide direct support for your Creative products. If you require immediate assistance, you will need to contact http://forums.creative.com/showthread.php?t=4

Maybe you are looking for

  • White Outline Around Placed Transparent .PNG

    I have put together an ad for my small company but am having a problem after printing to a high-res pdf with there being a thin white border where the edge of the actual file (its a square) is.  This placed file is a transparent PSD file. Can anyone

  • Apple tv mirroring problems

    Sometimes when i used the morroring fuction from my macbook to my apple tv, the video is transfered and the sound does not. Also there are times when both the sound and audio transfer and it works fine. Why does this happen? Its starting to get reall

  • ITunes 10 won't start in Windows Vista, but QuickTime Player will.

    I recently had iTunes updated to iTunes 10 using Apple Software Update. After the update was done, iTunes 10 worked well. Then just earlier, I tried to start iTunes, but it won't. No system message appears meaning there is no error. I tried rebooting

  • Pagination and Reset Pagination

    I do not understand what pagination means and what "reset pagination" does. I think I need an example where I can observe the difference between using or omitting a pagination reset. I created a page with a report and a search tool. Apex created auto

  • Terminal doesn't show changes immediately

    Hi, since some days I have an annoying problem: When I type something, for example 10 x [Return], my xterm doesn't "react" immediately. Nothing happens for at least several seconds. When I switch the window and switch back the input / command is show