Soundblaster X-fi xtreme audio icon used for equalizer.

I have bout the sound blaster x-fi xtreme audio soundcard and the software is installed but there is no icon in the taskar and i cannot find the graphic equalizer. I am using vista, is this the problem?

;Re: Soundblaster X-fi xtreme audio icon used for equalizer.O .Go to the Start Menu on the Windows Desktop
2.now look for the Creative Sound Blaster X-Fi Folder
3.look for the Creative Volume Panel and click it on
4.after you click it on , it should appear in your task tray
5.form your task tray click on the icon, that will open it up the Enterainment Mode
6.form there all of your controls are there, like, EQ. Bass, X-FI CMSS, EAX, X-FI Crystarlizer, Mixer, Speakers, imput, output
Message Edited by denb45 on 0-04-2009 0:28 [email protected]

Similar Messages

No 6.1 channel speakers option with soundblaster x-fi xtreme audio

Here is my problem: I have a 6.1 channel speakers and a yamaha receiver, but my computer doesn't show 6.1 configuration, and neither does the creative software. Both control panel and creative software only have 5.1 and 7.1. When I use my speakers with my dvd player everything works just fine. My soundcard is the soundblast x-fi xtreme audio pci, and I have windows XP. Does anybody know what's going on?

6.1 isn't really a common speaker configuration so I doubt that many sound cards discretely support it. I'm assuming that the only way to get 6.1 audio is from a movie with a Dolby or DTS -encoded track via SPDIF or letting the receiver upmix 5.1 input into the rear mono channel.
How are you connecting the sound card to the receiver? Are you using SPDIF or direct analog connections? If watching DVD movies, I'd recommend SPDIF, provided your DVD software supports it, you should be able to send a 6.1 encoded stream over SPDIF to the receiver, but for everything else I'd recommend the direct 5.1 analog connections, set your sound card to 5.1 and then let the receiver upmix to the rear channel if you so desire to use that feature.

Soundblaster X-fi Xtreme Audio and ALch

I bought a Soundblaster X-fi Xtreme Audio soundcard to go with my new computer as I have always used Creative and have been impressed by them. However, in Vista, my rear speakers do not seem to work. I did some research and found that ALchemy was what I needed, but I cannot get this to install. It gives me the error message that my card isnt supported. Is there any workaround for this? I feel pretty miffed having an X-Fi card and being excluded from proper sound in Vista.

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

Creative soundblaster x-fi xtreme audio PROB

Hello!
Ive just bought a ceati've soundblaster x-fi xtreme audio some days ago but it dosent work properly.
I bought a ( http://www.clasohlson.se/Product/Product.aspx?id=383530 ) becouse i wanted to connect my PC to my reci'ver but i cant choose Spdif in the console launcer.
-It just says unknown or no signal in the Digital I/O menu.
What am i doing wrong?
Help!

The Digital I/O jack on the Xtreme Audio soundcard isn't an optical out jack so you can't use an optical cable directly with the card. If your receiver has coaxial jack, you can get a 3.5mm minijack to coaxial cable to work with the soundcard.
JasonMessage Edited by Jason-CL on 04-08-2007 02:6 AM

SoundBlaster X-Fi Xtreme Audio PCI-Express and XFX 9800GT graphics c

Hi
I have just bought a SoundBlaster X-Fi Xtreme Audio PCI-Express card and looked at the motherboard where I have a XFX 9800GT graphics card installed and noticed the PCI-E slot where it attatches to the motherboard is right next to the graphics card and I am concerned it may cause air flow ventilation problems for the fan on the graphics card. The gap is about 2 mm.
.Does anyone think think this may cause the graphics card problems?
2. Is there an adapter/extention?lead that can be?connected to the PCI-E slot so I can attatch?the X-Fi Extreme card so I can move it away from the graphics card ?
Any ideas on this much appreciated.
Mack

The only way your going to know the answer to is by measuring the cards tempds before and after installing the sound card.
Graphic cards run with certain temp limits, and I guess there must be one for yours.
No idea on 2...all google throws up is "PCI Express to PCI Adapter".

SoundBlaster X-FI Xtreme Audio: short freeze / dropouts

hi,
my problem is:
from time to time my audio playback stops and whatever's coming out of my speakers at that point stopps for half a second or so and then continues as it should. video output and key/mouse input freezes while this happens.
it happens during regular working and in games.
it's annoying and I don't know what causes this problem. so I don't know how to fix it.
specs:
Soundblaster X-FI Xtreme Audio PCI? driver version 5.2..62
Windows XP SP3 and latest fixes
Core2Quad Q6600
3 GB DDR2-RAM
GA EP-35 DS3
GeForce 8800GT PCIe
TP Link WiFi PCI
anything that might help would be nice!

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

PLEASE HELP!! ExpressCard Sound Blaster X-Fi Xtreme Audio Sound Card for NOTEBO

Hi. I'm new here and found this forum because I have problems with my?Sound Blaster X-Fi Xtreme Audio Sound Card for notebooks. The card itself works fine with my Dell XPS notebook but I also purchased the upgrade kit-speaker docking module that would allow me to play my 4/4. speakers. The problem lies withiin the speaker docking module (upgrade kit). I'm running Windows Vista, could this be the problem? I don't get sound from my speakers. When I run the diagnostic test I only hear sounds from my front left and right speakers and nothing from my sub and my back speakers. I hear NOTHING when I play music or anything off of my laptop. Please help with this issue. Thank you.

That's great, but ideally i would require to purchase from the UK.....

Do SoundBlaster X-Fi Xtreme Audio support O2ja

The sound will be weird when playing some songs. Etc song :Identity Part 2 Hard
Operating system : Windows XP Pro SP2
Speaker : Altec Lansing Vs42
Motherboard : Asus P4V800-X
Soundblaster Driver : .4.78
P.S : o2jam is a music game, more information visit www.o2jam.com.my
Message Edited by frey88 on 03-07-2008 04:24 AMMessage Edited by frey88 on 03-07-2008 04:25 AM

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

SoundBlaster X-Fi Xtreme Audio Notebook connections to speake

Was wondering if anyone out there could tell me something? i have the creative S750 Gigaworks 7. surround sound speakers. i have just purchased the X-Fi Xtreme audio notebook card with the surround sound connection piece. on my sub there are four ports: Green, orange, white and black. Now on the other end of that very same cable there are only three, the typical Black, Green and Orange that i have used on my desktop for my 7. surround sound needs. My question is, where do i get this cable with both ends having all four colors to connect into my external speakers dock? if anyone can help me on this I would be greatly appreciati've. Thanks.........

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

Problem with SoundBlaster X-Fi Xtreme Audio Card Installat

I just completed installation of my X-Fi Xtreme Audio card for PCI express slot. I followed instructions and cancelled the prompt for audio drivers (by the hardware wizard) and installed via the Creative Labs CD. The installation went well and the card appears to be
functioning normally. My problem is that whenever I boot up the computer, the hardware wizard keeps discovering my card as new hardware and prompting me for a driver. I have been cancelling each time, but the last time I put in the CD, and had it search for the driver in the Audio/Drivers/driver/WinXP/bin, but it didn't seem to be able to locate the driver to satisfy itself.
What should I do (besides turning off the hardware wizard) to end this cycle of "new hardware found" episodes every time I boot.
I hope that someone can help with this.
ps: I would have liked to speak briefly with a Creative Tech Support person, but they seem to have conveniently left any telephone contact numbers off of their website, so I must depend on your help. Thanks.

Hi,
Please check the "Support" folder on your installation CD for Customer Support contact details.

Soundblaster X-FI Xtreme Audio rear speakers won't wo

have an XP PS2 64 and the driver is ?5.2..68 dated 5/8/2007
front L+R and Center work.... the rear speakers just have a faint humm or buzz
when i did the?driver update it installed this 5.2..620 dated 9/25/2007
this update made it terrible, no center sound and the 2 front were scratchy,skippy,crackly....still no rear speakers...settings don't do anything
found this update Creative Sound Blaster X-Fi Xtreme Audio Pack .04.0078 (40.7 MB) [color="#222222">4 Oct 07
[color="#222222">it wouldn't let me install this update, said a more update driver is already installed
[color="#222222">after the st install and update i couldn't get the rear speakers to work.....system volume,conf,xfi controls panel etc....nothing worked
[color="#222222">can someone tell me which driver will get the surround sound to at least work
[color="#222222">my eyes are starting to bleed from all the reading........follow a thread only to find 5min later that it didn't work or the results weren't posted
[color="#222222">disappointed with the lack of support from creative,the?video card i installed took 5min and the sound card has 5hrs of reading with no end in site
[color="#222222">help please,point me in the right direction or a link that would solve my problem

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

Driver for SoundBlaster X-fi Xtreme audio Pci Expr

I bought a sound blaster X-fi X-treme audio Pci Express,Two weeks ago. Then I travelled to Brazil...When I got here in Brazil ,I notice my dvd Driver wasn`t scratched,but broked...And there is no driver for this type of sound card in the site...Someone can HELP ME?

please tell me how much of your CPU is using this card when you are just listening to music .
you can find the drivers here:
http://us.creative.com/support/downl...ype=0&x=20&y=7

Where are the icons used for Audio/Midi Setup Stored

I have OS X 10.8.5 installed on My 2009 Macbook Pro.I also have Pro Tools 8 And Digital Performer 7.2.4 installed. I appear to have multiple copies of the generic Folder Instlled as well. How do I create another folder with my custom icons and where should it be placed.
Regards
Charlie Parker

Steve B5 wrote:
what is the proper setting for Hz?
44100
And should the 2ch be 16bit, 20bit or 24 bit?
16 is standard, 24-bit (new to GB4) is the highest resolution

What is the following icon used for?

It is a rectangle with a small black triangle at the lower right. It has another rectangle in the center of the outer one that has what looks like a gradient in it. Lighter to the left and darker to the right. I am taking a test and they want to know the following:
creating an inverted image, reversing the existing color palette
creating a cloud pattern using two colors
creating a color gradient using two or more colors
What is the answer? I have never seen this before and I do not have CS5.
Thanks, the sooner the better...

I'm thinking they just stylized it, because no, it doesn't exactly match the gradient icon in the Tools panel in the current release of Photoshop.
Here's the same tool in Photoshop 6.0 (6 major versions older). That's closer, but still not a perfect match.
For completeness, here's what it looks like in PS CS6:
-Noel

Airport Express - Discontinuous Audio when used for streaming music

I recently installed a new iMac with Leopard along with Time Capsule as the base station connected wirelessly to the iMac. Added Airport Express to this network and everything looks like it works after a couple of tries.
When I play iTunes on the iMac and select the Airport Express speakers, I get a discontinuous sound. iTunes plays the music for 10 sec, stops for a few sec, then picks up where it left off...repeat endlessly.
iTunes plays back fine on the computer's speakers.
Any thoughts on how to fix the discontinuous music streaming ?

1. Check to make sure that iTunes isn't hogging all of your CPU when it is running. If your CPU starts running at 100%, you will get audio dropouts. Make sure that unnecessary processes don't load at boot time.
ok, cpu is fine, between 0 and 25% when playing
2. In Quicktime, Edit -> Preferences -> Quicktime Preferences -> Audio -> uncheck "Safe Mode". If this doesn't work, then recheck. You should reboot to make sure.
DOne, rebooted, undone, redone, nothing helps
3. In Airport Express Utility, Wireless -> Wireless Options -> Check on Use Interference Robustness
also done
4. If you have a lot of wireless internet routers in your neighbourhood you can try changing your wireless channel. Netstumbler will show you what's going on in your area.
tried all of the 13 channels!
5. If using a router and your Airport Express is a client of your router, move the antennas on your wireless router. One of the antennae should be at a 45 degree angle from the router so that the two antennas don't cause a conflict with each other. (Imagine dropping two stones into a pool of water where the waves created by the stones are equal to the radio waves produced by your router; the waves hit each other and distort the path of each one; by moving one of the antennae on an angle, this conflict is avoided.)
antennas turned as you told me, still not better
6. In iTunes, you might try changing the following: Edit -> Preferences -> Advanced -> Change the buffer streaming to "small" (or one of the others).
done, and also tried "medium" and "large"....
7. If you are using a third-party router, and you are comfortable with changing the settings, and if you have this setting, you might want to try lowering or increasing the Beacon Interval.
not familiar with this, what is a third party router? I have one main router for adsl and digital tv, + trying to get airport working for music...
8. Of course, don't have a metal filing cabinet, or hollow tubes (yeah, even toilet paper rolls -- so no iTunes in the bathroom, please) -- as these would also interfere with broadcast.
no interferences, no metallic cabinet, no toilets around lol
what can I do more? give it back to the shop, buy a MAC computer instead of my pc? I think I'm going to give that thing back to the shop....
Thank you very much for all your help but here I'm realy, realy getting fed up with this. Either it should work perfectly, either not, but here, sometimes it works, sometimes not, and there's no appearant reason when it drops.....you'll never know when it's gonna happen and for how long.
So disapointed!

Soundblaster X-fi xtreme audio icon used for equalizer.

Similar Messages

Maybe you are looking for