Soundblaster zx control panel. How to make it close and exit?

When you open the control panel then close it. Its not really closed but minimized in the tray. Is there a registry hack I can do to make it actually close. So I don't have to click close, then right click it again on the tray and hit exit.

hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b

Similar Messages

  • Syslogd - How to make it close and open a new messages file

    I am doing some testing and I need that every time I start my testing a new
    var/adm/messages file is started.
    I can mv the /var/adm/messages file and touch a new message file. However,
    the syslogd process still does not notice this. I know there is a way to
    give a signal to the syslogd process without having to reboot the machine.
    So, the instruction will be kill -<signal> <process ID - pid>
    However, I do not know which signal.
    I give kill -l, and it shows me a lot of signal but no speciafication or
    description of each.
    in the man pages of the syslogd it is mentioned this possibility, but it
    does not say the signal.
    Please can you help me with this.
    Please e-mail to [email protected]
    Thanks

    Hi,
    i have a solution cum - question:
    Solution:
    we can clear the /var/adm/messages file (just before starting the testing) by :
    # > /var/adm/messages.
    Q: Though this is a very crude way of doing it, This serves the purpose doesnt it ? and has worked for me. I havent found any problems with this and I dont need to reboot either .
    Is there any problem that i am unaware of in this approach. ?
    HTH,
    Rgds,
    Sonith

  • How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

    how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

    Hi bluegrandpanash,
    Thanks for visiting Apple Support Communities.
    If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Best Regards,
    Jeremy

  • HT4847 icloud is not in my control panel - how do I add to my computer

    icloud is not in my control panel - how do I add to my computer

    You need to install the iCloud control panel on your computer:
    http://support.apple.com/kb/DL1455

  • How to make the dblink and what is the use of this

    plz any body tell me "how to make the dblink and what is the use of this"
    sujit

    Do you understand how to make the Slider work using code to read its value?  You will need to look into that in order to do this.
    What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1.  That way the yellow will gradually fade as you slide.
    What you will then need  to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider.  You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
    You should not start new postings for the same topics that you arlready have postings for.  Doing so in the future might result in them being removed.

  • How to make Sales group and office field mandatory in VA01 first screen

    hi gurus,
    can anybody tell me how to make Sales group and sales office mandatory field on VA01 tcode first screen. i have requirement to make it compulsary on the first screen otherwise they wont be able to goto next screen.
    will reward points for sure
    thanks
    mandy

    Hi! Mandy,
    Try using t.code SHD0, choose your transaction variant here, further choose your screen variant.
    Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry required by you make the necessary changes(Output only, invisible or required) and save.
    The system will prompt to assign a package and request enter the necessary values.
    Provide your feedback.
    Regards,
    PATHIK

  • How to make New Document and Upload Document to have same Content Type in Document Library in Sharepoint 2010

    Hi,
    How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
    Note : I have created custom Content Type since I have custom columns along with upload column..
    Regards, Shreyas R S

    go to library settings 
    Change new button order and default content type
    set your custom content type to be #1
    when you upload new document it will automatically have your custom content type
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • How to make your iPad and iPhone commicate with each other

    How to make your iPad and iPhone commicate with each other

    this is very easy...
    firstly disconnect the DSL modem for the linksys..
    then connect the computer to the linksys router (port 1/2/3/4)..
    then access the linksys setup UI
    open ur web browser
    site: http://192.198.1.1/
    username: [blank]
    password: admin
    now hook up the westell modem.. and goto the status page ...
    check Internet IP.
    if then Internet IP is 192.168.1.* then,
    disconnect the westell from the router and goto the setup page.
    change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
    save settings....
    connect the westell and viola ur online...
    if the Internet IP is 0.0.0.0 then
    goto the setup page and change the 'Internet connection Type' to 'PPPoE'
    once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
    sud be something like '[email protected]'
    once done save settings...
    goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
    hope this helps...
    cheers..
    Life is short... So get movin !!!
    DopeLorD

  • How to make own editor and call it?

    could you please tell me how to make own editor and call it on a clicking of a push button corresponding to an test Item

    In the Object Navigator... just click on the 'Editor' Node and press the '+' (Create) button....
    Set then any properties as you like....
    So simple...
    Greetings,
    Sim

  • How to make an ebook and sell it on the ibook or app store??

    How to make an ebook and sell it on the ibook or app store??
    Can anybody help me please T^T
    By the way I'm in Thailand and want to sell my ebook around the world.
    This is my dream ^^.. Help me please...

    Hi,
    Start with the ADC iOS dev center here.
    http://developer.apple.com/devcenter/ios/index.action
    Carolyn

  • How to make an before and after effects?

    So, I want to make a video that show the audience this is before and after the edit. And i want to make it look like this YouTube Rewind 2014: Behind the Scenes - YouTube
    How to make it?
    Thanks:)

    Really? You take footage of you shooting the video with another camera then you edit it together with shots of the finished project. If you want to show before and after shots of an effect you just put the original footage on top and animate a mask or opacity to reveal the rendered effect below.
    If you can't figure out how to make a before and after then you will have a very difficult time doing any effects using AE because there is absolutely nothing in this before and after but very basic editing and masking.

  • HT1420 How to make Apple ID and iCloud the same Id?

    How to make Apple ID and iCloud ID the same after they have been created?
    iTunes keeps asking for ID and passwords that were created differently.

    You can't im afraid. I wanted to do the same and got the following from Apple:
    I am sorry, you cannot update your email address to MobileMe address as each Apple ID is unique.
    Ross, I would like to let you know that, you cannot change your Apple ID if it was at any time a .Mac or MobileMe email address, even if your subscription has ended or been canceled.
    The email address that ends in .me is already an Apple ID as well, as when you set up a MobileMe email its automatically set up as an Apple ID. So you cannot use this email address on another account. It is permanently associated with your MobileMe Apple ID.
    This article provides helpful information when choosing which Apple ID to use with iCloud:
    Apple IDs and iCloud
    http://support.apple.com/kb/HT4895
    This page also covers topics such as moving MobileMe accounts to iCloud, managing your Apple ID, and how to get content purchased with multiple Apple IDs onto your iOS device.
    I hope this information was helpful. If you require further assistance, please do not hesitate to reply to this email and I will be more than happy to assist you further.
    Sincerely,
    Thenmozhi
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/
    I wrote back and tried to escialte the issue but got no where. The whole thing is very disappointing and I hope Apple sort it out eventually.

  • Hello, i would like to know how to make horizontal sites and it moves with the scroll

    Hello, i would like to know how to make horizontal sites and it moves with the scroll

    Hi
    You can refer to these videos :
    http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
    https://www.youtube.com/watch?v=gZI_K1TXqOM
    Thanks,
    Sanjit

  • Spry Accord. Panel - How to make it closed Please help!

    Hi, I would like to ask for your help with the following:
    I made a spry accord. panel. I was wondering how to make the first tab being closed when I open up the following page. Somehow when I made it, it created that the first tab stays open all the time. I was wondering if I can make it being closed and only open when I click on the Artisan Collection.
    Thank you so much for your help in advance! Agi
    Here is the link and you will see the panel on the left handside:
    http://mallinfurniture.com/browse_c01.html

    Hi,
    Thank you so much for the answers. I tried what you recommended. An error message came up saying the following. Also, I noticed something weird in my coding... Maybe that is why it is not working. I copy the coding as well. Thank you so much for taking the time to help me out!!!
    Error message: "This document contains JavaScript code for a widget that no longer exists. If you don't remove the code, the browser might display JavaScript errors when loading the page. Would you like Dreamweaver to find all the instances of this code for you?" Ok, No.
    When I click on Ok. Nothing happens. What am I doing wrong?
    Coding - the end of my page:
    <script type="text/javascript">
    <!--
    var Accordion1 = new Spry.Widget.Accordion("CatalogMenu", {defaultPanel: params.panel ? params.panel: 0});
    //-->
    </script>
    <script type="text/javascript">
    <!--
    var Accordion1 = new Spry.Widget.Accordion("Accordion1", { useFixedPanelHeights: false, defaultPanel: -1 }); //--> </script> </body>
    </html>
    It looks like I have double of that. When I removed the first accordion, all of my panels were opened...
    What could ne wrong?
    Thank you! Agi

  • Slow Soundblaster Z control panel - error message

    Hello,
    my control panel have a problem, that loads up very slowly and also is very laggy, if i use it. I also get an error (screenshot attached). I allready reinstalled the driver completely, killed all creative drivers from disk, still same problem.
    Any help?
    Windows 8.1 64x, latest updates and patches
    Error.jpg

    I think I've seen similar errors when trying to navigate the control panel using keyboard.
    so make sure to use mouse only.
    control panel can load slowly first time after restart.
    this should not happen when launching second time via tray icon.
    anyway it never seemed laggy to me.
    I would rather pass the fade in/out animation when switching category/tab, but not a big deal.

Maybe you are looking for