Soundbooth error when I try to record - WinFile.cpp-705

We are using Soundbooth on a high school classroom computer. When we try to record from a microphone we get the following error message: ..\..\Src\Win\WinFile.ccp-705
Does anyone know what is causing this error?
The permission rights on school computers are fairly restricted.  Our school's Tech Department blames the problem on Quicktime. I think this is a permissions issue.
I would appreciate help solving this problem.
Thanks!

Hi Mahesh --
I have Adobe Captivate 6 and use Windows 7 Enterprise.  Below is a screen shot of the error.  Unfortunatley, it is in German, but it says  : Adobe Captivate can't be started.  Check to see if Adobe Captivate is configured to be run in adminstrator mode.  If so, configure Microsoft Powerpoint to be run in administrator mode and restart Adobe Captivate.
Thanks again.

Similar Messages

  • Error when I try to record application simulation in Adobe Presenter 8

    Hello, I have a 30 day trial of Adobe Presenter 8 and a subscription to Adobe Captivate 6.  I would like to record an application simulation within Presenter, but I receive an error after entering a SWF-Name that states that Captivate cannot be started and to check to see if Captivate is configured to be run in administrator mode. (Captivate is actually already open in admin mode.)
    Any suggestions?
    Thank you!  Ryan 

    Hi Mahesh --
    I have Adobe Captivate 6 and use Windows 7 Enterprise.  Below is a screen shot of the error.  Unfortunatley, it is in German, but it says  : Adobe Captivate can't be started.  Check to see if Adobe Captivate is configured to be run in adminstrator mode.  If so, configure Microsoft Powerpoint to be run in administrator mode and restart Adobe Captivate.
    Thanks again.

  • HELP!!  I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!! Adobe Presenter

    HELP!!  I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!! 
    Adobe Presenter
    Adobe Presenter has encountered an unexpected problem while
    working with this presentation.  Try saving your work to a new file and
    restarting PowerPoint.  If the problem persists, consult the Help menu
    item, or contact support at http://www.adobe.com/support/presenter.

    Please provide your system specification. Also is it happening on a specific presentation or every presentation.
    Regards,
    Rajeev.

  • I have an error -5000 when I try to record in GarageBand..I urgen need help, I have an error -5000 when I try to record in GarageBand..I urgen need help

    I have an error -5000 when I try to record in GarageBand V10,02..I urgen need help, I have an error -5000 when I try to record in GarageBand..
    I just reinstal OSX 10,9,2 marveiks and downdload the GB.. but when I try to record, the error ocurr
    I urgen need help
    thanks

    This is probably one of the files that is required by the template you are using.
    These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
    You need to dig down through the folders and files to find what you want...
    Contents/Resources/da.lproj/Templates/
    If the file is missing you would need to re install the iWeb app...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • "Error when reading ATP delta records"

    Hi,
    I have created Integration models for Location, Product, ATP Check, ATP Configuration, Stock and Sales Order.
    After creating IM's when I tried to run ATP on my Sales Order I'm getting  error " "Error when reading ATP delta records".
    Can anyone provide me why I'm facing this error.
    Thanks in Advance.
    Ram

    Dear Ram,
    For the product/locations you are checking, it appears that ATP objects in the liveCache are missing which normally are created automatically  when products and locations are created in APO.
    I would advise to recreate all needed products and locations.
    In APO, i.e. make again an initial data transfer of the master data from R/3. Previously the existing ones should be deleted to be sure that they will be created again. Then the problem should be solved. 
    If this does not help please check the the connection and LC settings to LDA and please try to restart the livecache. A potential explanation for the error would be an incorrectly maintained LDA connection to liveCache. Please check this by running transaction  /SAPAPO/OM13 and selecting the 'checks' section.                    
    The problem with the LDA connection could be e.g. very simple. If you check the table dbcon, which contains the description of the liveCache connections , if the liveCache names for LCA and LDA are different you should ensure, that the connections LCA and LDA are setup for the same liveCache (con_env in dbcon).                  
    I hope this helps.
    Regards,
    TIbor

  • Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

    Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
    -or-
    The icon in the dock bounces once, and nothing happens.

    Windows or Mac, and exactly which operating system version?

  • Error when I try to open Firefox. Says Firefox is running in the background and cannot open. Suggests closing that window or restart system. This has happened several times recently. I reinstalled but am still getting the error. Any thoughts?

    I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?

    This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
    I know this sounds weird, but it has worked for me about 80% of the time.

  • TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networ

    My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networkl.

    Can't connect to the iTunes Store
    Make sure that time zone is correct in addition to date and time

  • Error when I try to import db

    I get the following error when I try to import a DB from my machine (9.2) to a 8.1.7.4 Unix (Sol 2.8) box. I can import locally on my 9.1 fine. Anyone hab=ve any ideas?
    Thanks
    Here is the message:
    Import: Release 9.2.0.1.0 - Production on Wed Feb 5 07:46:50 2003
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.4.0 - Production
    IMP-00003: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    IMP-00023: Import views not installed, please notify your DBA
    IMP-00000: Import terminated unsuccessfully

    Hi,
    Whenever you are exporting and importing database remember following rules;
    1. The Import utility and the database to which data is being imported (the target database) must be the same version.
    2. The version of the Export utility must be equal to the lowest version of the source or target database.
    Good luck. :)
    -San

  • I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

    I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can

    Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

    The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
    Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
    While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

  • Why am I getting an ORA-04052 error when I try to compile a Procedure?

    Hi,
    The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
    CREATE OR REPLACE PROCEDURE APPS.Find_String (
    pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
    IS
    cursor cur_get_dependancy
    is
    SELECT distinct owner, name, type
      FROM [email protected]        -- prod.world
    WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
       AND referenced_type <> 'SYNONYM'
       AND owner <> 'SYS'
    order by name;
    v_owner  varchar2(40);
    v_name   varchar2(50);
    v_type   varchar2(40);
        BEGIN
           dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
           dbms_output.put_line(' ');
           dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
           dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
            FOR i IN cur_get_dependancy
            LOOP
                v_owner := RPAD(i.owner, 30, ' ');
                v_name  := RPAD(i.name, 45, ' ');
                v_type  := RPAD(i.type, 30, ' ');
                dbms_output.put_line(v_owner ||v_name|| v_type);
            END LOOP;
    END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
    What's even stranger is that I took the SELECT statement
    SELECT distinct owner, name, type
      FROM [email protected]        -- prod.world
    WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
       AND referenced_type <> 'SYNONYM'
       AND owner <> 'SYS'
    order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
    ORA-04052: error occurred when looking up remote object [email protected]
    ORA-00604: error occurred at recursive SQL level 1
    ORA-02068: following severe error from PINP
    ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?

    OK Justin,
    Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
    By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
    SQL> conn apps/apps1@dev1
    Connected.
    SQL> SELECT distinct owner, name, type
      2    FROM [email protected]
      3   WHERE lower(referenced_name) = lower('ALL_USERS')
      4     AND referenced_type <> 'SYNONYM'
      5     AND owner <> 'SYS'
      6   order by name;
    OWNER                          NAME                           TYPE
    PUBLIC                         ALL_USERS                      SYNONYM
    XDB                            DBMS_XDBUTIL_INT               PACKAGE BODY
    XDB                            DBMS_XDBZ0                     PACKAGE BODY
    SYSTEM                         MVIEW_EVALUATIONS              VIEW
    SYSTEM                         MVIEW_EXCEPTIONS               VIEW
    SYSTEM                         MVIEW_FILTER                   VIEW
    SYSTEM                         MVIEW_LOG                      VIEW
    SYSTEM                         MVIEW_RECOMMENDATIONS          VIEW
    SYSTEM                         MVIEW_WORKLOAD                 VIEW
    ORASSO                         WWCTX_API                      PACKAGE BODY
    PORTAL                         WWCTX_API                      PACKAGE BODY
    ORASSO                         WWEXP_UTL                      PACKAGE BODY
    PORTAL                         WWEXP_UTL                      PACKAGE BODY
    PORTAL                         WWPOB_API_PAGE                 PACKAGE BODY
    PORTAL                         WWPOF                          PACKAGE BODY
    ORASSO                         WWPRO_PROVIDER_VALIDATION      PACKAGE BODY
    PORTAL                         WWPRO_PROVIDER_VALIDATION      PACKAGE BODY
    PORTAL                         WWSBR_EDIT_ATTRIBUTE           PACKAGE BODY
    PORTAL                         WWSBR_FOLDER_PORTLET           PACKAGE BODY
    PORTAL                         WWSBR_USER_PAGES_PORTLET       PACKAGE BODY
    ORASSO                         WWUTL_API_PARSE                PACKAGE BODY
    OWNER                          NAME                           TYPE
    PORTAL                         WWUTL_API_PARSE                PACKAGE BODY
    PORTAL                         WWUTL_EXPORT_IMPORT_LOV        PACKAGE BODY
    ORASSO                         WWUTL_LOV                      PACKAGE BODY
    PORTAL                         WWUTL_LOV                      PACKAGE BODY
    PORTAL                         WWV_CONTEXT                    PACKAGE BODY
    PORTAL                         WWV_CONTEXT_UTIL               PACKAGE BODY
    PORTAL                         WWV_DDL                        PACKAGE BODY
    PORTAL                         WWV_GENERATE_UTL               PACKAGE BODY
    PORTAL                         WWV_GLOBAL                     PACKAGE
    PORTAL                         WWV_MONITOR_DATABASE           PACKAGE BODY
    PORTAL                         WWV_PARSE_AS_SPECIFIC_USER     PACKAGE BODY
    PORTAL                         WWV_PARSE_AS_USER              PACKAGE BODY
    PORTAL                         WWV_SYS_DML                    PACKAGE BODY
    PORTAL                         WWV_SYS_RENDER_HIERARCHY       PACKAGE BODY
    PORTAL                         WWV_THINGSAVE                  PACKAGE BODY
    PORTAL                         WWV_UTIL                       PACKAGE BODY
    PORTAL                         WWV_UTLVALID                   PACKAGE BODY
    38 rows selected.
    SQL>Let me know what you think.
    Thanks again.

  • Get file not found error when I try to sync

    I get file not found error when I try to sync Iphone.

    SteveDVD,
    The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
    If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
    And yes, the re-Importation should yield the same result as Linking/re-Linking.
    Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
    That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
    Good luck,
    Hunt

  • Java error when I try to execute runInstaller

    Hi all,
    Someone can tell me why I get this error when I try to execute the runInstaller script ?
    echoes:/temp/Disk1$ ./runInstaller
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-05-13_09-29-09PM. Please wait ...echoes:/temp/Disk1$ Oracle Universal Installer, Version 10.1.0.3.0 Production
    Copyright (C) 1999, 2004, Oracle. All rights reserved.
    Exception java.lang.UnsatisfiedLinkError: /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/libawt.jnilib: occurred..
    java.lang.UnsatisfiedLinkError: /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/libawt.jnilib:
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)
    at java.lang.Runtime.loadLibrary0(Runtime.java:822)
    at java.lang.System.loadLibrary(System.java:992)
    at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
    at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
    at java.awt.Component.<clinit>(Component.java:545)
    at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
    at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:278)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:714)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
    Exception in thread "main" java.lang.NoClassDefFoundError
    at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
    at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:112)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:772)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
    I'm trying to install the 10g db on a PowerMac G5 with 4 gig ram, OSX 10.4.9 with all the latest patches.
    The oracle user shell config is the following :
    =====================================
    ORACLE_BASE=/opt/oracle
    ORACLE_HOME=$ORACLE_BASE/product/10.1.0/db_1
    ORACLE_SID=mydb
    export ORACLE_BASE ORACLE_SID ORACLE_HOME
    if [ $DYLD_LIBRARY_PATH ]
    then
    DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:$ORACLE_HOME/lib
    else
    DYLD_LIBRARY_PATH=$ORACLE_HOME/lib
    fi
    HTDOCS=/usr/local/htdocs
    export DYLD_LIBRARY_PATH HTDOCS
    PATH=/usr/local/bin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:$ORACLE_HOME/bin
    export PATH
    PS1='\h:\w\$ '
    export PS1
    alias l='ls -la'
    alias svrmgrl='sqlplus /nolog'
    ================================
    Thanks in advance,
    Max

    Is the Oracle runInstaller message telling me that it wants IBMJava2 -1.3.1, even though is says to install 1.3.1 or higher?Yeah, it has been known to act a bit funny on newer releases of JRE.
    ~Jer

Maybe you are looking for