SoundEffects don't work in AE CS3 ..

I am new to AfterEffects and I have gone through the tutorials included with
the Master Collection .. but I have some issues where things don't work.
Key among these is sound effects. I can't preview them in Bridge .. I just
get broken images. It's not Bridge as I can preview other sound files in
Bridge just fine. But the Sound Effects included in the Presets of AE don't
appear to be valid files.
Is this a known issue or am I going to have to reinstall something?
Thanks!
Nancy

ah .. thanks, Steven .. I'll give that a try. Much appreciated! Nancy <[email protected]> wrote in message news:[email protected].. > Weird, I've never even noticed those. They aren't really sound effects in > the traditional sense, meaning they are not sound clips per se. They are > actually using AE's Tone effect, which is a tone generator, able to > produces tones at various pitches and rhythms. Since it is an effect, and > Adobe didn't bother to post samples like they did for the visual effects, > you'll need to drop the desired preset on a solid with in AE to preview > it. > > These presets are pretty limited/specific, but could certainly be helpful > for a number of things.

Similar Messages

Hyperlinks that I create in InDesign CS3 don't work in the PDF

I've created several hyperlinks in an InDesign CS3 file, using the Hyperlinks panel. But when I export to PDF format, the hyperlinks don't work. Even the ones that start with http:// or www. don't work. Is that just the way it is? Or am I doing something wrong?
Thanks,
Ellen

Is there a button? I don't see anything saying "Hyperlinks" in the Export dialog box. I've attached an image of what I'm seeing.
Thanks

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have original cs3 master collection but scratched. i need to install it on my macbook pro (mavericks). Adobe download links don't work. I have original serial number. what should i do? i paid a lot for the package.

I have original cs3 master collection but scratched. i need to install it on my macbook pro (mavericks). Adobe download links don't work. I have original serial number. what should i do? i paid a lot for the package.

Downloads available:
Suite: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Links don't work

Hi, i have a problem.
I have modified a page made with dreamweaver4 with my new
dreamweaver CS, and any links don't work in Internet Explorer! Only
the e-mail button works correctly.
The old pages continue to work correctly.
Help me please!
Thanks in advance
I send a part of the code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN" "
http://www.w3.org/TR/html4/loose.dtd">

<html>
<head>
<title>frame_up.jpg</title>
<meta http-equiv="Content-Type"
content="text/html;">

<script
language="JavaScript">
<!--
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document;
if((p=n.indexOf("?"))>0&&parent.frames.length)
d=parent.frames[n.substring(p+1)].document;
n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for
(i=0;!x&&i<d.forms.length;i++) x=d.forms
[n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++)
x=MM_findObj(n,d.layers.document);
if(!x && d.getElementById)
x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new
Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a
))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src;
x.src=a[i+2];}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr;
for(i=0;a&&i<a.length&&(x=a)&&x.oSrc;i++)
x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new
Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0;
i<a.length; i++)
if (a
.indexOf("#")!=0){ d.MM_p[j]=new Image;
d.MM_p[j++].src=a;}}
<td rowspan="7"><img
name="frame_up_r4_c5"
src="files/frame_up_r4_c5.jpg"
width="59" height="78"
border="0"
alt=""></td>
<td rowspan="3"><a
href="azienda.htm"
target="princ"
onMouseOver="MM_swapImage('frame_up_r4_c6','','files/frame_up_r4_c6_f2.jpg',1);&quot ;
onMouseOut="MM_swapImgRestore();"><img
name="frame_up_r4_c6"
src="files/frame_up_r4_c6.jpg"
width="62" height="12"
border="0"
alt=""></a></td>
<td rowspan="7"><img
name="frame_up_r4_c7"
src="files/frame_up_r4_c7.jpg"
width="25" height="78"
border="0"
alt=""></td>
<td rowspan="3"><a
href="menu.htm" target="princ"
onMouseOver="MM_swapImage('frame_up_r4_c8','','files/frame_up_r4_c8_f2.jpg',1);&quot ;
onMouseOut="MM_swapImgRestore();"><img
name="frame_up_r4_c8"
src="files/frame_up_r4_c8.jpg"
width="68" height="12"
border="0"
alt=""></a></td>
<td rowspan="7"><img
name="frame_up_r4_c9"
src="files/frame_up_r4_c9.jpg"
width="26" height="78"
border="0"
alt=""></td>
<td rowspan="3"><a
href="news.htm" target="princ"
onMouseOver="MM_swapImage('frame_up_r4_c10','','files/frame_up_r4_c10_f2.jpg',1);&qu ot;
onMouseOut="MM_swapImgRestore();"><img
name="frame_up_r4_c10"
src="files/frame_up_r4_c10.jpg"
width="39" height="12"
border="0"
alt=""></a></td>
<td rowspan="7"><img
name="frame_up_r4_c11"
src="files/frame_up_r4_c11.jpg"
width="27" height="78"
border="0"
alt=""></td>
<td rowspan="3"><a
href="scheda.htm"
target="princ"
onMouseOver="MM_swapImage('frame_up_r4_c12','','files/frame_up_r4_c12_f2.jpg',1);&qu ot;
onMouseOut="MM_swapImgRestore();"><img
name="frame_up_r4_c12"
src="files/frame_up_r4_c12.jpg"
width="149" height="12"
border="0"
alt=""></a></td>
<td rowspan="7"><img
name="frame_up_r4_c13"
src="files/frame_up_r4_c13.jpg"
width="25" height="78"
border="0"
alt=""></td>
<td rowspan="3"><a
href="contatti.htm"
target="princ"
onMouseOver="MM_swapImage('frame_up_r4_c14','','files/frame_up_r4_c14_f2.jpg',1);&qu ot;
onMouseOut="MM_swapImgRestore();"><img
name="frame_up_r4_c14"
src="files/frame_up_r4_c14.jpg"
width="65" height="12"
border="0"
alt=""></a></td>
<td rowspan="3"
colspan="3"><img
name="frame_up_r4_c15"
src="files/frame_up_r4_c15.jpg"
width="247" height="12"
border="0"
alt=""></td>
<td><img
src="files/spacer.gif"
width="1" height="5"
border="0"
alt=""></td>
</tr>
<tr>
<td><img
name="frame_up_r5_c2"
src="files/frame_up_r5_c2.jpg"
width="20" height="3"
border="0"
alt=""></td>
<td><img
src="files/spacer.gif"
width="1" height="3"
border="0"
alt=""></td>
</tr>
<tr>
<td rowspan="2"><a
href="uk/home_uk.htm"
target="_top"><img
name="frame_up_r6_c2"
src="files/frame_up_r6_c2.jpg"
width="20" height="10"
border="0"
alt=""></a></td>
<td><img
src="files/spacer.gif"
width="1" height="4"
border="0"
alt=""></td>
</tr>
<tr>
(................................................................)

I'm having the same issue with non-working iWeb Page links. This was the first site I built on my iWeb, and posted on my .mac account. Everything works on iweb, but once I "publish all to .mac", the links become inactive. I've reset and tried everything but can't figure out what the problem is. Check it out.
http://web.mac.com/nicholassegura/iWeb/NicholasSegura/Welcome.html
user name: friend
pw: creative

I think I installed a pirated copy of CS5.1 Extended and now my purchased Elements 10 don't work!

So yeah, that's right. I admitted to a crime. Wanna fight about it?
I didn't know that it wasn't a legitimate copy. So now my purchased copies for Adobe Photoshop Elements 10 and Adobe Premier Elements 10 don't work! I tried restoring to a previous point, using a forced uninstall program that cleans the registry. I uninstalled my Elements copies, and when I reinstall them they don't show up in the start menu. I tried using the Adobe cleaner tool. I really do not want to use my restore DVD's for this laptop.
Help!
I can provide the Serial Numbers, and the codes on the DVD's put on the clear ring of the DVD, a copy of the purchase...etc.

Windows 7 64 bit home premium, ASUS A53 Core i5 processor, NVIDIA 610M
Actually it is relevant, because there is an activation program that generates a serial number.
[Wed May 02 21:30:40 2012] ---------------------------------------------------------
[Wed May 02 21:30:40 2012] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Wed May 02 21:30:40 2012] ---------------------------------------------------------
[Wed May 02 21:30:40 2012] Win OS Version: 6.1
[Wed May 02 21:30:40 2012] Cleaner Tool version        : 3.0.0.49
[Wed May 02 21:30:40 2012] Cleanup source directory    : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeSuiteCleanerTool
[Wed May 02 21:30:40 2012] [AdobeProgramFiles]        : C:\Program Files (x86)\Adobe
[Wed May 02 21:30:40 2012] [AdobeProgramFiles_x64]    : C:\Program Files\Adobe
[Wed May 02 21:30:40 2012] [AdobeCommon]            : C:\Program Files (x86)\Common Files\Adobe
[Wed May 02 21:30:40 2012] [AdobeCommon_x64]        : C:\Program Files\Common Files\Adobe
[Wed May 02 21:30:40 2012] [UserRoamingAppData]        : C:\Users\Scott\AppData\Roaming
[Wed May 02 21:30:40 2012] [UserLocalAppData]        : C:\Users\Scott\AppData\Local
[Wed May 02 21:30:40 2012] [StartMenu]                : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
[Wed May 02 21:30:40 2012] [System32Folder]            : C:\Windows\system32
[Wed May 02 21:30:40 2012] [SharedApplicationData]    : C:\ProgramData
[Wed May 02 21:30:44 2012] Language selected: English
[Wed May 02 21:30:44 2012] Displaying the Adobe End User License Agreement
[Wed May 02 21:30:44 2012] Please enter (y) for Yes or (n) for No.
[Wed May 02 21:30:46 2012] Choose any one from the options below :
[Wed May 02 21:30:46 2012] 1. CS3, CS4
[Wed May 02 21:30:46 2012] 2. CS5-CS5.5
[Wed May 02 21:30:46 2012] 3. Adobe Flash Player 10.2
[Wed May 02 21:30:46 2012] 4. Quit
[Wed May 02 21:30:46 2012] Choice :>
[Wed May 02 21:30:53 2012] User selected: CS5-CS5.5
[Wed May 02 21:30:53 2012] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db" "C:\Program Files (x86)\Common Files\Adobe\backup20120502T213053\pdb.db"
[Wed May 02 21:30:55 2012] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db" "C:\Program Files (x86)\Common Files\Adobe\backup20120502T213053\Media_db.db"
[Wed May 02 21:30:55 2012] Opened PDB database connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Wed May 02 21:30:55 2012] Opened MediaDB database connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Wed May 02 21:30:55 2012] List of products installed on this machine
[Wed May 02 21:30:55 2012] Listing products for cleanup:
[Wed May 02 21:30:55 2012] Please select a number corresponding to the product that needs to be removed else press Ctrl + C to Quit :>
[Wed May 02 21:31:03 2012] User selected: 'Clean All'
[Wed May 02 21:31:03 2012] WARNING : All the CS5-CS5.5 products and installer related data will be REMOVED from the machine. Do you want to continue..
[Wed May 02 21:31:04 2012] Please enter (y) for Yes or (n) for No. :>
[Wed May 02 21:31:06 2012] Please wait for Adobe Creative Suite Cleaner Tool to finish........
[Wed May 02 21:31:06 2012] *-*-*-*-*-*-* Start removing product : ALL *-*-*-*-*-*-*
[Wed May 02 21:31:06 2012] :: Cleaning-up left over inventories ::
[Wed May 02 21:31:06 2012] Inventory: 'AdobeApplicationManager-1.0' Type: SelfUpdate, Action: NoDelete
[Wed May 02 21:31:06 2012] Inventory: 'uninstallts', Type: RIBS, Action: Delete
[Wed May 02 21:31:06 2012] Deleting folder: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0\uninstallts
[Wed May 02 21:31:06 2012] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: False
[Wed May 02 21:31:06 2012] ::Start:: Removing AUM contents
[Wed May 02 21:31:06 2012] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:AdobeAAMUpdater-1.0
[Wed May 02 21:31:06 2012] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Wed May 02 21:31:06 2012] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:ADOBE_UPDATER_STARTUP_UTILITY
[Wed May 02 21:31:06 2012] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Wed May 02 21:31:06 2012] Deleting scheduled task : AdobeAAMUpdater-1.0-Scott-PC-Scott
[Wed May 02 21:31:06 2012] Executing command: schtasks /delete /TN "AdobeAAMUpdater-1.0-Scott-PC-Scott" /F
[Wed May 02 21:31:06 2012] ERROR: The system cannot find the file specified.
[Wed May 02 21:31:06 2012] Deleting scheduled task : AdobeUpdater Task-Scott-PC-Scott
[Wed May 02 21:31:06 2012] Executing command: schtasks /delete /TN "AdobeUpdater Task-Scott-PC-Scott" /F
[Wed May 02 21:31:06 2012] ERROR: The system cannot find the file specified.
[Wed May 02 21:31:06 2012] Deleting folder: C:\Users\Scott\AppData\Local/Adobe/AAMUpdater/1.0
[Wed May 02 21:31:06 2012] ::Finish:: Removing AUM contents
[Wed May 02 21:31:06 2012] ::Start:: Removing OOBE
[Wed May 02 21:31:06 2012] Executing command "taskkill /F /FI "IMAGENAME eq AAM Updates Notifier.exe""
[Wed May 02 21:31:06 2012] INFO: No tasks running with the specified criteria.
[Wed May 02 21:31:06 2012] Deleting folder: C:\Program Files (x86)\Common Files\Adobe/OOBE
[Wed May 02 21:31:08 2012] Deleting folder: C:\Program Files (x86)\Common Files\Adobe/AAMUpdaterInventory/1.0
[Wed May 02 21:31:08 2012] Folder does not exist: C:\Program Files (x86)\Common Files\Adobe/AdobeApplicationManager
[Wed May 02 21:31:08 2012] ::Finish:: Removing OOBE
[Wed May 02 21:31:08 2012] Removing content of Product : CS5Installer, Version : CS5
[Wed May 02 21:31:08 2012] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Wed May 02 21:31:08 2012] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Wed May 02 21:31:08 2012] Folder does not exist: C:\Users\Scott\AppData\Local\Adobe\OOBE
[Wed May 02 21:31:08 2012] Folder does not exist: C:\ProgramData\Adobe\SLStore_v1
[Wed May 02 21:31:08 2012] *-*-*-*-*-*-* Finished removing product : ALL *-*-*-*-*-*-*
[Wed May 02 21:31:08 2012] All the CS5-CS5.5 products and CS installer files have been removed.
[Wed May 02 21:31:08 2012] Action : Created the C:\Program Files (x86)\Common Files\Adobe\backup20120502T213053 folder as backup of PDB and MediaDB for this session.
[Wed May 02 21:31:08 2012] LOG FILE SAVED TO: C:\Users\Scott\Adobe Creative Suite Cleaner Tool.log
[Wed May 02 21:31:08 2012] Adobe Creative Suite Cleaner Tool completed successfully
[Wed May 02 21:31:08 2012] ---------------------------------------------------------
[Wed May 02 21:31:08 2012] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Wed May 02 21:31:08 2012] ---------------------------------------------------------

Hyperlinks to folder locations don't work

Hello,
I'm having trouble creating functioning hyperlinks to folder locations on local or network drives. I've tried this both in InDesign CS3 and InDesign CS1 on Windows XP.
I select the text, create new hyperlink, choose 'URL' as Type, then paste the filepath into the URL box (e.g. D:\). If my text tool is within the hyperlink text of the InDesign document, then I click on 'Go to hyperlink destination', it will open a new Windows Explorer window with the correct destination. If I export to PDF, however (making sure to check 'Bookmarks' and 'Hyperlinks' to be included), these hyperlinks to local or network drives don't work. I get errors like 'Cannot find 'd:%5C'. Make sure the path or Internet address is correct'.
The other hyperlinks to web addresses seem to work fine. Does anybody have ideas on this?

I should have read that more closely.
It doesn't seem to apply. The only reason that would matter is if you were running the SWF-output from Captivate locally.
ALWAYS test your product from the web to avoid any such security issues.
But yes, if you're putting the published file on a local/network drive, then that security change will need to be applied and, yes, for every computer that accesses the file.
You definitely want to distribute from an HTTP location.
I did hope the first part of that article would help. They're not difficult to setup once you find the option. Just highlight some text and right-click to setup the hyperlink...right?

Save Doesn't Work in Dw CS3

All of a sudden Save no longer works in Dreamweaver
CS3 on an XT(2) PC. At first I tried Control-S and thought that
something was grabbing the control character - but it doesn't even
work from the drop down Menu File/Save. What is weird is the Save
As works. Just a pain because it asks me to overwrite each time. Or
it will save the work (after asking) when I hit F12 to test in the
browser.
I tried deleting the Configuration file but that didn't help.
I am really lost and frustrated by this. Oh, and it works in Ps, Fw
and Fl!!!!

http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=dd550772
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"thanser" <[email protected]> wrote in
message
news:g8klm8$74k$[email protected]..
> What's up with this now?
>
> This is a fresh installation of CS3 on a Mac Pro G5.
Pasting in text from
> Word or Excel won't work in Design View, but it does in
Code View.
>
> I've been doing this for a while now on another machine,
using CS2.
>
> What am I missing? Did I overlook something? I've
checked in the
> Preferences, but besides the usual choices for pasting,
I don't see why
> this
> won't work.
>
> Ideally, I'm trying to improve my process of placing
tabular data from
> Excel.
> It's a pain to paste in information cell by cell.
>
> Why can't I paste-in ANY text of any kind in Design
View?
>
> Thanks!
>

Transitions don't work after importing a project from Premiere to AE

I've imported a project from Premiere CS3 to AE CS3 and all my transition (fade + wipes) are now solids and they don't work on timeline or on exports, but they still show in my sequence.
How can I make AE use those transition again so I don't have to go through all project and keyframe transitions.
Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
Thnak you for your time and interest in my problem.

fredou_79 wrote:
Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
Exactly the problem. AE is only to able to translate a few transitions, which include the normal cross-disolve, linear wipe, dip-to-color and a few others, but since those routines are hard-coded in the Premiere Pro Importer, they have no way f doing the same for third-party products. So more or less you will have to rebuild your stuff, either by using the proper transitions in PPro or in AE.
Mylenium

CMYK gradient maps don't work correctly in Photoshop CS 4

Gradient maps built with CMYK colors in Photoshop don't work correctly in CS4. For one particular client I often use a brushed steel background. To control color shifts on the press I used a gradient map blending from C0 M0 Y0 K0 to C40 M20 Y20 K100. This has worked great in the past, but once you open that gradient map in CS4 and start editing that gradient at all, even if you edit it back to the original CMYK numbers, the colors shift drastically, and if you watch the info palette, the colors get totally remapped to a different black. I can go in a reset the black to the C40 M20 Y20 K100 mix, but it doesn't work. When I go back in, it completely changes them.
Since this works fine in CS3 and not in CS4, is this a program bug? I'm not doing anything differently.
It was a great way of controlling neutral gray mixes (and other color mixes) for CMYK printing. Is there a fix for this? Adobe, is anyone addressing this bug? I've read other threads on this, but with no solutions.
Kent Bingham
Digital Illustration and Design
I couldn't attach the .psd files, so I uploaded here for reference:
http://www.kentbingham.com/gradientmap-error.zip

I have not gone back to check how this is handled in CS3 yet I could duplicate your problem in CS4. The changing of numbers in the CMYK looks like it has to do with the color mangement settings in Photoshop.
I was able to make sure the numbers input to the gradient map did not chang. I did this by going to Edit>Assign Profile and then clicked the option "Don't Color Manage this Document"
This may not solve your problem directly yet it does indicate that the problem you have (or that Adobe has) is related to how the color management is being handled.
So one question would be are you using the "exact" color management settings in CS4 as you did in CS3 and were those in place when you imported the file into CS4. If not, and if you did not have the correct warning options set, there may have been a color setting change of which you were not aware.
While I was able to keep the original settings from changing in the Gradient Map, there was still a problem in CS4 where the Lab values would change (and the appearance on the LCD screen) after doing any color picker editing and changing the CMYK values back to 40 20 20 100. This definetly seems related to the color model/probile/management system in place. So it appears that even though I can get the CMYK numbers to stay and not change, there is still a bug when making no changes to the color management settings, and the CMYK values are the same, that the Lab values and the appearance on the screen change.
Hope you can get Adobe's attention. Looks like a bug to me.

My hue/saturation filter quits working in Photoshop CS3

I keep having this issue where my hue/saturation filter just quits working. I use that filter religiously so it has to be fixed each time it occurs. I've only had the Adobe CS3 for 3 months and I've had to resolve this 3 times now. Each time this has happend I've had to uninstall the entire CS3 design package and do a complete reinstall which takes almost 4 hours because my download uses the Adobe server. My product download was purchased online so I do not have a disk but rather files that I downloaded from Adobe with product serial numbers.
I've used Adobe for years, as far back as Adobe 5, and never had such a problem! I've checked in my preferences and have ample RAM available for the settings. I use Dell inspirion and have 2 GB of RAM total on my system.
Can someone please advise why this would keep happening.
Thank you very much.

Resetting your preferences is much faster than uninstalling/reinstalling, so if you haven't tried it, that would be what to do next, although it would be nice to figure out what the issue is.
To reset your preferences hold the Ctrl-Alt-Shift keys down (windows) or Ctrl-Option-Shift keys down (mac) as you start up Photoshop. You should get a message confirming whether you want to delete the preferences file. If resetting preferences fixes things, then you should try to remember what you've been doing, just prior to having the problem.
Once Hue/Sat sliders seem to be disabled, are they still way for all images that you open (a JPG for example), or are they just messed up for one image, but you need to work on that image so you have to fix things before doing anything else? Hue/Sat is not a valid operation for certain modes, like Grayscale, although the menu item is disabled in this case.
From: smk2008design
Sent: Saturday, April 11, 2009 4:40 PM
To: Steve Sprengel
Subject: Re: My hue/saturation filter quits working in Photoshop CS3
The hue/saturation filter window does open and it is not grayed out. However, it does not allow me to do any thing to it. I try to slide the saturation to the left or right and it does not move. The same goes for the "Lightness" and "Hue". I don't understand why it will work for a month or so and then just quit. I end up rebooting my system to try and resolve but unfortunately once this occurs it seems to be stuck no matter what I do, that is until I unstall the entire program and reinstall...
So if I need to change something in my preferences, what do you suggest that would be? I appreciate your help, thank you.

Adobe Dreamweaver CS6 application frame workspace don't work

My workspace in frame mode dont work.
It is invisible. I cant only see it when it is on "application bar". It don't help to reset, se this screencast:
Adobe Dreamweaver CS6 application frame workspace don't work - YouTube

I would try clearing the program cache then restoring preferences if that doesn't clear it up...
Deleting a corrupted cache file
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If neither work, a clean & reinstall...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

"New" Godaddy webhosting account's won't work w/Dreamweaver CS3

Hello,
I am having problems getting my Godaddy webhosting account's to work with Dreamweaver CS3. My older accounts work, it is my newer (last 6 months) accounts that have this issue. The ftp information works in my CuteFTP8 Professional. I called Godaddy tech support several times and they could not figure out. And, since it works in my FTP program, they said it is a Dreamweaver issue.
In the FTP host Remote Info I have tried www.domain.com, domain.com, ftp.domain.com with login and password. I also tried checking Use passive FTP, Use IPv6 Transfer mode, Use Secure FTP (SFTP) and leaving them all unchecked. The error message I always get is:
An FTP error occurred - cannot make connection to host. No response from the server. This may be due to one or more of the following reasons: etc.
I compared information with my Dreamweaver accounts that do worked and still no luck.
The only thing I can think of is when you create a new hosting account with Godaddy, depending on the month, you are assigned a different web server. Could it be the old Godaddy web servers work and the new web servers may have different settings that don't work with Dreamweaver? Or, I need different setting information??? I am at my wits end.
Any help on this would greatly be appreciated.
Thanks,
MonaE

Hi Mona:
If your FTP client works, then there has to be some miniscule detail that's different between that setup and what you're inputting into your DW Manage sites. Maybe you should print out your successful FTP setup details, and compare to what's in your DW...
If this helps, this info came from GoDaddy's help section:
From the Site menu, select Manage Sites.
In the Manage Sites box, Click New, then choose Site.
In the Site Definition box, enter the name and URL of your website and clickNext.
If a certain type of server technology is necessary for the site to function, selectyes. Otherwise, select no and click Next.
For working with files during development, select Edit local copies on my machine...(recommended). It is very important that they select this option.
Enter connection information as follows:
How do you connect to your remote server?
FTP
What is the hostname or FTP address of your web server?
ftp.domainname.com
What folder on the server do you want to store your files in?
/ or blank
Enter your FTP login and FTP Password
Click Next.
For checking in and out files, select No, do not enable..
Review the summary to be sure all information is accurate, then click Done.
I have a dozen sites hosted at GD, and in most cases (where I had trouble), it was operator error. Good luck!
Regards, Ned

What ordinary tasks don't work with OS X 10.3.9 ?...

Thank you folks !
a.
What kinds of users might not need to upgrade from OS X 10.3.9 yet?...
b. What ordinary tasks don't work with OS X 10.3.9 ?...
c. What other tasks don't work with OS X 10.3.9 ?...

Hi everyone and hi fugnug,
{quote:title=fugnug wrote:}
There are many ordinary tasks that don't work with Panther. Browsing with Safari is a good instance. That seems to be a Mac thing, even though Safari 2 and 3 aren't for Panther, so the browsing experience just isn't as good. Safari 1 is fast, but it just won't run newer developer's scripts. The sad thing about Safari being a Mac thing is that it is supported on Windows Xp which is just as old as Panther.{quote}
It is disappointing safari 2&3 isn't supported by Panther. But, ya know we gotta
live with it. Windows XP is Microsoft. Panther users really don't need it with free/donationware like OpenOffice and NeoOffice. You can also try FileJuicer and
purchase it for a small price, and it can come in really handy if you need to open Windows type documents and Stuffit deluxe for Mac can open some of them too.
Safari 1 has a few substitutes that work very well and are current and supported.: like Seamonkey, iCab, Camino. Firefox is no longer updated current for Panther though.
{quote}
Another common thing like a dashboard isn't really supported.
{quote}
Yahoo widgets works for Panther and it's a really nice App. It was Konfabulator before Tiger was out.
{quote}
Also most freeware developers don't make their programs supported by Panther these days. A very common dismay for Panther users is to see a really great program and download it eagerly forgetting to look at the req-specs and then get the little disappearing icon on the dock. That crash should come with a fog horn sound effect, it would really be a good metaphor for that feeling you get. Not just freeware, but newer software like Adobe CS3. (Of course, if you had the money to buy CS3, you could probably sprig for Leopard{quote}
There's plenty to keep you more than productive available on Versiontracker.com
with lots and lots of older panther compatible versions. (Although not all of them are still in the severs. Just check the versions in the preview of the source at the bottom of your browser.
{quote}
Screen-shots is common task; AppleShift3(4). You can only save in PDFs, which we all know you can't upload to Photobucket. So you have to export from Preview, which is reminiscent of Print Screen and paste into Paint in Windows (a total turn off). I've heard there was a way to change it and I think I found a tutorial once about how to change the save screen format... but I think it was actually for Tiger, because it didn't work for me /fog horn{quote}
You can export from preview to other formats easily by clicking on File/Export..
Sure though, some things out there don't work on panther. Like free songs from Amazon require a special downloader compatible with 10.4.x and higher.
If you want to listen to full songs for free, there's sites out there that let you type in what you want to listen to and you can stream it in from your browser.
Some sites like nintendo and probably others require Firefox. So, yes. Time is ticking against panther.
I'm in the serious consideration stage of upgrading to Tiger or Leopard. For some
things on the Web we need to stay current. Honestly, now a days everyone who uses
a computer needs to.
But, Panther is a very fun and snappy OS for me. I'll miss it's simplicity and humbleness. It's been totally awesome for my family and me! It's had it's shortcomings, but I look forward to a bright future in upgrading.
Cheers,
L+

Prints in LR 2.1 all too red, work fine in CS3. Detailled info included

Hi,
I bought a new Canon iPF6100 printer and I figured out how to get it working nicely in CS3/PS. I have installed the latest drivers and firmware, and I have put the icc profiles for the paper in the C:\WINDOWS\system32\spool\drivers\color directory.
But printing in LR2.1 give me a very red image, a kind of a hue shift and I just cannot figure out how to get it done properly. I have created a PDF document with a preview of the images as well as all the settings I tried. It can be viewed at http://www.dorrmanagement.nl/printen.pdf
Any help is very much appreciated.
Thanks,
Peter

[email protected] wrote:
> Thanks Patrick.
> I tried your thorough walkthrough with all settings found in the
> thread, but still no luck.
>
> I could not quite get all profile settings to the same setting.
> Would you be so kind to have a look at the new screenshots I made? to
> see if you can direct me otherwise?
Peter,
Maybe a few explanations are in order...
The problem is that for some configurations (HP or Canon or whatever
printers), disabling the Color Management on the printer driver side
doesn't work with Lightroom for some unknown reason (although this works
with any other software including PS). In those cases, the trick is to
*not* disable Color Management on the printer driver side, but to setup
the driver in such a way that it makes a "blind" transform (no
transformation actually takes place as would be the case if disabling
Color Management on the printer driver side actually worked). That is,
you tell it that the input ICC profile is the same as the output
profile.
So in Lightroom you select the ICC profile that is relevant for the
printer/paper pair that you are using, and on the printer driver side,
you specify the very same profile as the input *and* output ICC profile.
So the input profile is certainly not sRGB but Fuji Semi Gloss IPF6100
as well.
Patrick

SoundEffects don't work in AE CS3 ..

Similar Messages

Maybe you are looking for