Soundfonts Help In Vista

I just bought an Audigy Soundcard that is soundfont compatable, and I have the soundfont bank manager that came with it and vienna, but neither seem to work. Neither one will open, and I worry that this may be a problem with Vista. Can anyone help me?

sorry, my mistake. Craig pointed out that the help menu
needed to be set to "All Books".

Similar Messages

  • Help Mac user help new Vista user - install itunes or not?

    Hi,
    My friend has a new Vista PC and he's not a skilled user. I'm a Mac person myself. He's having tons of trouble with it and I live 2000 miles away. I'm here on a visit and have been helping him get Flash player and Yahoo IM etc installed.
    Is iTunes a simple, painless, installation or does it require troubleshooting? If the latter, then we won't even try. Too little time for anything but install-and-play.
    Your advice will be much appreciated.

    Our luck will be problems out the wazoo. His PC is brand new and shiny, but working with it is like trying to do eye surgery on yourself without instruments or anesthesia: painful.
    Maybe we'll postpone this until I buy him a Macbook later this year.

  • Help Mac user help new Vista user - install QT Player or not?

    My friend has a new Vista PC and he's not a skilled user. I'm a Mac person myself. He's having tons of trouble with it and I live 2000 miles away. I'm here on a visit and have been helping him get Flash player and Yahoo IM etc installed.
    Is Quicktime Player a simple, painless, installation or does it require troubleshooting? If the latter, then we won't even try. Too little time for anything but install-and-play.
    Your advice will be much appreciated.

    Thanks for the link. It's downloading the standalone installer now.
    Still need someone to chime in if QT will install without problems on the Vista PC. This bit (with my emphasis) from Apple at the download page isn't encouraging.
    Windows Minimum Requirements
    A Pentium processor-based PC or compatible computer
    At least 128MB of RAM
    Windows 2000 Service Pack 4 or XP Service Pack 2
    End User License Agreement
    QuickTime on VISTA Feedback
    Running QuickTime on VISTA? Give us your feedback.
    I don't want his PC to blowup before I leave tomorrow.

  • Adobe After Effects CS3 Crash help on Vista

    I've installed and re installed After Effects about 5 times now and it keeps crashing when the splash screen pops up. The message "Adobe After Effects CS3 has stopped working." I found that the message comes up when its initializing Media Core. Here is the report from vista about the App Crash.
    Please help!
    Product
    Adobe After Effects CS3
    Problem
    Stopped working
    Date
    9/17/2008 1:39 AM
    Status
    Not Reported
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AfterFX.exe
    Application Version: 8.0.0.298
    Application Timestamp: 465d3a47
    Fault Module Name: StackHash_acaf
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Code: c0000096
    Exception Offset: 0ff62a3b
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: acaf
    Additional Information 2: b76b3522689a083200114e083ecf3e98
    Additional Information 3: 0c56
    Additional Information 4: 4d8a5cc0ffe3e3a2cf058732c3c78aad
    Thanks!

    I used CS3 Clean script and followed all the instructions for "Bigger problem-solving tools" and "Other Tips & Tricks" on http://generalspecialist.com/2007/02/troubleshooting-after-effects-7.asp.
    I'm still having the same problem but only StackHash_d742 is the problem none of the other extensions are showing up, after I attempt to run the program multiple times.
    Is there a way to track this file down?
    Here is the new problem report:
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AfterFX.exe
    Application Version: 8.0.0.298
    Application Timestamp: 465d3a47
    Fault Module Name: StackHash_d742
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Code: c0000096
    Exception Offset: 0ccb2a3b
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: d742
    Additional Information 2: 8c0b39e9167d2af32cd5918c4e47ad30
    Additional Information 3: 0bc6
    Additional Information 4: b9a642c2fb7d280dedb83638cddb3589
    Extra information about the problem
    Bucket ID: 933737916
    -Logan

  • Help, windows vista doesn't recognize iphone, can't restore

    Hello everyone, I'm having a problem syncing my iPhone 3g with iTunes to restore it. I received an iphone 3g 16gb from a friend because he didn't want to try to fix it. He told me it broke after he dropped it. Boots up to the apple logo and just stays there, sometimes spinning, sometimes not.
    So I started reading around the net trying to find ways to fix it. I've tried hard resetting (home and wake/sleep same time for 10 secs) and that didn't help. I've tried hooking it up to an itunes with the most recent update and restoring from there. The problem is, my laptop doesn't detect the iphone at all. I have a VAIO with VISTA Business and it is not detecting the phone at all when I plug it in, doesn't show up in device manager or give any indication that the iphone is plugged in other than when I plug it in, the phone boots up to the apple. I've tried plugging in the phone and going into recovery mode from there and I can bring up the screen that shows itunes and the usb cable but nothing shows up in itunes. I've tried getting into DFU mode, but my laptop is still not detecting it.
    I'm running out of ideas so I thought I'd post on the web. Has anybody run into this problem before? I've googled it and checked this forum and others and havent found anything. Is my iphone bricked? Anyone with any experience with similar problems, please let me know!

    A bit of a long shot but you could try and reset the nvram using a stop+N key sequence. Like I said a bit of a long shot which I do not expect to work as it seems you have tried most things.
    I assume that both keyboards work ok on another system and that there are not loose connections between the keyboard, mouse, monitor and the system.
    Does the system boot up, pass diags, etc when the ttya is used. It might be worth while stress testing the system with something like SUNVts.
    You need to also keep in mind this might genuinely be a connector fault with the motherboard, perhaps caused while taking the system apart or moving it.

  • HTML Help and Vista

    I created a .chm file from RoboHelp HTML Help that
    works/displays fine on Windows XP Pro OS. The same file will not
    display correctly on Vista. The wrapper and TOC are fine, but the
    actual HTML pages do not display (receive a "The address is not
    valid" error).
    Is anyone else having this problem? I assumed since they are
    just HTML pages they would display on any OS.
    Thanks for your input!!!

    Hi AnnieTechWriter and welcome to our community
    Are you running the .CHM off a network drive in Vista? If so,
    I would think the same rules apply there as with other versions of
    Windows.
    Click
    here to read more about that.
    Assuming you aren't, have you tried right clicking the .CHM
    and looking at the properties? Maybe it's treating it like XP does
    when you download one from the web. If you do that, you normally
    have to right-click and look at the properties and click a button
    labeled "Unblock".
    Cheers... Rick

  • No help in vista????

    I got a message when I went to look for help in the advanced title editor(alpha CG) that help is not supported in Vista for this area. I cannot figure out how to export my redesigned titles back in to there proper place in the action tray in VC3.

    Ask if the print house has PDF job options. You can then copy that into the correct pdf folder (do a search to find it) and use that to print to PDF.

  • Help! Vista connection Problem WRT54G2

    I was connecting to the Internet through my wireless router for the last month without any problems. I was using the default SSID of linksys. I decided to change the SSID to make it unique to my house. I went 192.168.1.1 and changed my SSID name. As soon as I did that my wireless connection went down, not to my surprise. I searched for my new SSID name in order to connect and found it. I tried to connect to that SSID and could not connect. I have used a pen to reset the router in order to return to the default settings. I simply can not connect to the Internet in Vista through the WRT54G2. It is not my ISP either because I can connect directly from my cable modem to my computer. I believe there is a conflict in settings some where between vista and the router. I dont know where though. Please help this is driving me crazy!
    Solved!
    Go to Solution.

    Since you have already Resetted your Router, then your Router is back to the Factory Defaults.... To make all your Computers go online through the Router you need to re-configure all the settings back on your Router....
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Help with Vista Email/Calendar with iTunes

    I got a new laptop from Dell and it is running Vista 32bit. Problem is I loaded itunes latest version 7.6.2.9. When I plug in my iPhone I don't see the vista email programe nor do I see the calendar. I have a PC and if I use that which is also running vista I see both. Can someone please help me. I have set the email and calenda to default and that has not worked.

    I am having the same issue. However, I am also trying to add a folder that has all my music and as soon as I start my computer crashes and restarts. Working with Windows Vista is a new pain.

  • Need help with Vista & Audigy

    Hi all. I'm hoping someone can help me out. At first, with all the latest Creative Drivers, there was absolutely no option for "What U Hear". I got fed up and uninstalled the drivers completely. When Vista restarted, it began downloading it's own drivers for my SE, which kinda surprised me. For the heck of it, I checked again and wouldn't you know it..."What U Hear" was now suddenly available and works well....by itself. This is my problem. I need "What U Hear" to work AS WELL AS my microphone. I'm stuck with either one or the other. Not good. Is there any conceivable way to record what I hear AND what I say into my mic? I'm open to any solution, even if it means jerry-rigging it some ugly way. Please help?

    Kaelthas: I just went iinto Device Manager, and chose to uninstall the drivers. Then Windows prompted me to make sure I want to "Completely uninstall this device". So I said yes. I originally did this hoping to go back to my onboard sound, but when Windows restarted, it automatically began searching for drivers. I was leery about stopping it, so I let it go. When it was done, I checked the Recording tab again, and POOF! What U Hear was available.
    I don't know why or how, but What U Hear works. And if I keep the level no higher than 80-ish, there's no static or feedback or any distortion whatsoever.
    Now...everyone keeps telling me to mess with the Registry to get mic boost back. I've done this, and the DWORD for MicBoost is now 0x000000 instead of 0x0000000, but it didn't seem to work. My mic seems totally unaffected.

  • Help! Vista Audio Settings issue (I think)

    Ok, I admit it.  I'm in way over my head.  Any advice is greatly appreciated!
    Last Spring I bought a new Sony Vaio laptop (with bluray drive and HDMI out), Sony XBR LCD, and Yamaha receiver (1 HDMI out - 2 HDMI in) from a local Best Buy.  I brought everything home, hooked them up and things worked perfectly.  I had the laptop playing Bluray movies and MP3's through the HDMI cable to the receiver.  I migrated to the east coast for the summer and when I returned home, I can see my computer screen on the TV and watch movies...but there is no sound (no DVD sounds, no iTunes, no Vista bleeps and bloops) coming from the receiver (they do work correctly if I use the laptop speakers).
    I have the laptop connected via HDMI to the "DVD" spot on the back.  I also have the satellite box connected (via HDMI) to the receiver in the "TV" spot.  When I select "TV" on the receiver I get audio and video from the satellite service.  When I swap the cables nothing changes.  I've tried hooking the laptop to the "TV" connection on the receiver but continue to have the same issue.
    I suspect there is a setting wrong on the laptop (if the receiver is able to process the video from the laptop, wouldn't it process the audio from the same source?).  I'm a Vista novice and haven't been able to sort this out.
    I have gone to the Control Panel -> Hardware & Sound -> Manage Audio Devices.  The "Digital Output Device (HDMI)" is set as the default and says "working properly".  
    Where else should I be looking when trying to figure out why I have video playing but not audio?  Again, many thanks for any help!

    I'm not certain; when I search "Lenovo Settings", it comes up with Settings, which does have the grey gear icon. I would assume it's the same.Here's the options shown for me in this: http://puu.sh/jjMpz/cf1ea17be5.png

  • PLEASE HELP windows vista langu

    I have tried to change the original language my windows vista program came in which is spanish into english. I have tried to do everything i can and read all the options/ isntructions it told me, but nothing changes the language. PLEASE HELP ME!!!

    First off all this forum is for discussions about Creative's soundcards in Windows Vista and not a general Vista forum. Second I don't think you can change the language in Windows. I think you have to buy a new copy of Vista that is in english. I may be wrong, but I don't think so.

  • Need Help - Windows Vista and Latest Flash Player

    Have Windows Vista and Adobe for viewing video. Just recently I was unable to
    view the videos. Pop-up showed that I needed to update to the Flash Player 11. I down loaded
    as instructed and was advised that download was successful but still can't view the videos
    since the same sign shows up. Have tried to see what I'm missing but without much luck.

    What is your browser?  If IE:
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Help please, vista wont run flash player

    I cant watch youtube videos, and a lot of other things on the
    net, im going crazy here, I been looking in the forum, trying
    different sollutions here and nothing of it is working for me,
    Please, somebody help me, im no genius in computers, but
    please help me

    I guess i have the same problem that everybody else have,
    I can´t play videos like youtube, ever since windows
    updated something my computer went crazy, i tried all the solutions
    in the forum, but im no genius, on youtube i get the message that i
    either dont have the latest update or else its turned of, i tried
    to install flash and nothing happens

  • Computer idiot needs help with  vista and java

    -running vista home edition 64bit
    - i am administrator
    -need to run an older version of java jdk/jre6 update 6
    - when i download the appropriate version for the windows 64 bit, I go through the installation and finish it but java never appears in my control panel
    - if i download the version for just windows the java icon appears in my control panel but IE7 does not recognize it as being there
    HELP

    AFTER I break down and erase the HD and reinstall OSX
    You don't have to erase the drive to reinstall the OS. Just reinstall WITHOUT erasing the drive. Only system files will be over-written, and your borked OS will be fixed, while your own files will be left in place. You really should have a backup before a reinstall, but unless one is very unlucky and something goes wrong it isn't strictly necessary.
    Never trash anything unless you know what it is, what it does, why it is doing it, and what put it there to do that. I know, it's a bit late for this crisis, but you should now avoid future crises caused by throwing away (or moving) the wrong thing.
    Francine
    Francine
    Schwieder

Maybe you are looking for