Soundfonts missing high frequencies after new driver installation

Hi there,
did anyone have a problem similar to this :
I recently installed new drivers for my sb audigy (newest driver webupdate from Nov. 9th 2003, audio-hq, surroundmixer and taskbar)...i was happy about the new options and the driver seems to be stable, but a problem occured - the soundfonts sound quality is not as good as before, they sound kind of muffled, it seems that the high frequencies are missing... I didn't have that problem with the 'old' driver(s) installed.
Does anybody know a solution for this ?
Thanks for you reply in advance,
Tannoy.

Hi Flying_Ghost,
thanks for your reply. It helped me to figure out how to avoid that volume difference but still the soundfonts sounded the same way.
So i started an intensi've search in the internet and in this forum to find a hint about what could be the reason for this and finally found the solution, maybe it's interesting for you and anybody else who may have the same problem:
In the directory C: (assumed to be the main path)\ProgramFiles\Creative\SBAudigy\Program\WDM\C ommon is an application placed called 'ctpanel'. It includes an option for speaker settings and this involves a check-box for CMSS 3D selection, it was set to CMSS . CMSS is creative's multi-speaker-surround 3D, designed to bring stereo content into the 5. and now even in 7. surround sound.
Somehow at least the soundfont signal passes through the CMSS - section when the Creative Asio driver is used within an sequencer application. With CMSS activated, the soundfonts sound kind of muffled -- set CMSS Off and it sounds the way it should be.
Best regards,
Tannoy.

Similar Messages

New driver installation

Hi,
I installed JDBC driver- ojdbc14.jar for oracle 10.2 and it is working,now I want install JDBC driver ojdbc14.jar for oracle 9.2 (I am on Unix & PI 7.1) for that I add the ojdbc14.jar file in .SDA file and deploy it using JSPM.
but still the server is accessing 10g driver it is not detecting 9.2 drivers.
what to do? is there any process like I have to undeploy old driver and then deploy the new driver?
some suggest about CLASSPATH entry where can I locate it in unix,(but in my case jar file name is not changing so it is not requried)
please guide

Hi,
Please go through the below document for new driver installation:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04ce027-934d-2a10-5a8f-fa0b1ed4d88f
Thanks,
Prasanthi.

Lightroom Files missing after new drive added

I recently filled up my old hard drive(F:) so I went out and bought a new and larger one. Without realizing it the new one was now the F drive and my old one is now the H drive. But Lightroom can not find all of my files in my old drive and I think it is because it is now located on the H drive. I don't want to loose the new photos I put on the new drive (now the F drive). What can I do? If I re-import the old drive will it recognize all my old files?
Help?....

Do not re-import. If you do so, you'll lose all your work on those files.
In the Folders panel in Lightroom, right-click on the highest-level folder and choose Find missing folder from the context menu. In the dialogue box that comes up, navigate to that folder on your H: drive and select it. All the images in that folder and all its children, grand-children, etc. will be reconnected with your Lightroom catalogue. If you have more than one top-level folder, repeat with the others.
Hal

Cannot back up with Time Machine/Capsule after new drive installed in MacBook Pro

MacBook Pro 2.53 GHz Intel Core 2 Duo running 10.8.5.
I just had a larger hard drive installed by Tekserve. This is to be my first back up since installing the new drive. I have 2 back ups: one to my Time Capsule via WiFi, the other to an external Le Cie via USB.
Time Machine just gives me preparing to backup but goes no further, just stuck in that mode. I suspect that it can't find my old drive, which it backed up till now. But I cannot find a way to correct this possible snafu. I do not see an option in Preferences.
Any thoughts?
Thanks

Just so we are clear.. were your files all recovered from backup after the install of the disk?? Did you supply one of the backups to the company who did the installation so they could do the recovery?
You do want to be careful not to damage the old backup.. it might really be better to start over a clean new backup.
TM should be reset. It sounds like they did recover your settings.. Please check Pondini here.
A4 http://pondini.org/TM/Troubleshooting.html
Also use A1 to check what the log is saying about TM.. the old backup will need to be fully indexed and checked if you intend to keep using it.. and that will take several hours to the TC if you use wireless.. The problem people expect fast starts but that is not possible unless you are doing a new backup.
You can also check some of the other help files there eg D1 long preparing for why that happens.

Mac Pro refuses to boot after new drive instalation...

Hi
Could anyone shed a bit of light on my problem - Ive just got a new 500gb seagate drive, - when I load it up in order to format, im faced with a blank screen, and os x refuses to even think about booting up - there is also an odd click which Im guessing is the boot drive trying to start.
The new drive slots into place fine, and I made sure I was earthed out before touching it...
When the new drive is taken out, the system starts up without a hitch.
Do I have a duff drive? - or am I missing something blindingly obvious?
Thanks for any help
Maxine.

Hi,
Funny that I saw this message, I am the person that had the exact same problem on the 20th of December.
After trying to install the HD, I had the problem as well. I ended up taking the computer in to my local Apple store, and they kept the Mac Pro.
It is now January 5th and I still do not have the system. Called them an hour ago and they said that the part (they didn't mention what it was) was on BACKORDER, so they had to decide if they were going to wait for the part or give me a brand new system. Hmmmm.... Could this be a NEW hidden problem for the Mac Pro now?
I wanted to purchase an iMac, but was afraid of the lock-up issues. I am starting to regreat my choice and wish I had got an iMac, at least I would have some kind of file server for my network
All I can suggest is to take it in to your local Apple store and let them check it, and then ask if they could fix it right then, or you two could have a system that's not able to be workable.
-Dan Uff

Fresh Win7, freeze while rebooting after video driver installation

Yesterday when I opened my laptop it froze while booting when the Win7 logo appears. Rebooted in safemode, all was good, didn't know what to look for exactly.
Today, I decided it was time for a new Win7 reinstall so I did it. Also, did a complete format of my SSD where I keep only my OS.
While it was rebooting after installing the AMD video driver it froze again, in the same spot. Restarted the laptop, chose last known good config and noticed in device manager that one of the video cards had error 43 (Windows has stopped this device because it has reported problems. (Code 43))
I tried to install the driver for Intel then, but I got an error saying my laptop does not have the minimum requierments (even for older versions of the driver)
I tried every possible combination of installing, uninstalling, enabling, disabling one of the cards.
When I install the AMD driver, the Intel driver installs itself too.
When I leave AMD graphics enabled, it freezez at Win7 logo while booting,
When I disable AMD and leave just Intel enabled, then it boots normally, but right after the reboot, device manager shows them both with yellow triangle and "!" with error "This device cannot work properly until you restart your computer. (Code 14)", and of course, if I reboot then it freezes again.
I have already spent 10h on this and couldn't find a way to fix it.

Hi
Using Advanced boot options ( F8 at start up ) go into Safe Mode with Command prompt , Once Safe mode loads with command prompt type rstrui.exe hit Enter .... This will take you into System Restore ... Follow the onscreen instructions to Restore your system to the time before the AMD driver was installed . You can choose from multiple restore points if they have been created by you or your system .
Post me your Findings
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Wont boot from CD after hard drive installation.

I just installed a new hard drive in an iBook 700mhz. I expected the system folder missing message, as the hard drive was blank. However now it wont boot from CD when I hold down c on boot. Also when I hold down option, I get a circular arrow and an arrow pointing to the right but no real options. I reset the PRAM but that didn't help. Any one have an idea?

Over the years I've seen some optical drive failures that were actually being caused by the hard drive. The first thing I'd suspect given a new drive is that you didn't quite seat the I/O cable. The second is that the HD is defective. A couple times everything seemed fine and when the drive was placed on the bench and after formatting it there and reinstalling it the drive and computer were happy.

Why can't I re-install CS4 after new drive installed?

I had a hard drive crash. Had a new hard rive installed at computer repair store. Had any recoverable files installed on new drive. Removed any remaining CS4 files recovered. Went to re-install CS4 and it won't install.

Run the cleaner tool and try again:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Mylenium

ODS activation failures after new hardware installation..urgent

Hi All,
I am working in PRD.There are 10 process chains which i need to monitor daily.Daily ODS activation fails in 4 of the 10 chains.The error message for two of the failures are,
Task 0040 during SID specification without confirmation
and for another process it is showing "DBIF_RSQL_SQL_ERROR" error.
manually I am doing steps and the activation is successful.These type of errors we are getting after the new hardware installation.
Could anyone let me know are there any patches to be applied inorder to avoid such type of errors.
Please advice me what to do.
Thanks,
Manjula

What is the patch your currently on at the moment.
It could also be some of the settings in RZ11 have been changed. You need to work with your basis people to resolve this.
DBIF_RSQL_SQL_ERROR is a common problem and usually due to not enough processor's available and the database gettings into a knot.
Check SM21 and ST22 for the more information on the issue.

Time machine doesn't recognize old time machine backups after new drive

After getting my original hard drive replaced on apple care. Time machine refuses to recognize time machine backups dating back to October when I first installed Leopard. The Records are there on an "off-board" Lacie drive. Any fixes for this? I have had so many problems with Time Machine I am afraid to turn it back on. Last time it took over 40 hours to do an initial back-up.

Yes I had been having multiple problems and once saved the entire system in archive and install and also time machine had been active since October when I first installed it. all of this was saved to an off-board Lacie drive I can find the old time machine files easily enough but time machine since the new drive, does not recognize them. Since I got the drive back with tiger installed, I first had to re-install Leopard so I don't know if that caused Time machine to start over . I did do an archive and install at that time but there was nothing really to archive since they had not recovered my old files. If this wasn't bad enough The Technician replaced my administrator password with his own and the was off for a few days and I couldn't do anything for awhile. You have been very helpful thank you for your time on my behalf.
Respectfully,
Thomas Carlisle

Video card error after new driver update

I have a nvidia gt 630 video card in this pc. It has a 450w power supply, 8g ram, and windows 10 pro. With the upgrade to windows 10 the videocard quits working with the new driver. I have spent the last 5 days trying fixes with nvidia they recomended I try HP so here I am. When I check the error I get a window pnp error and it said further installation required. Nvidia thought it might be a bios issue but it was fine before.

Sensonic wrote:
Nope, it's not a hardware issue.
The cause, yes. However, that firmware update might have – a guess – broken the hardware forever. Again, it could just be coincidence. I am not able to rule that out from the distance. You have two options: Wait for a firmware patch (which might do a lot of magic and repairs hardware) – or go for Nokia Care Centre.
Sensonic wrote:
Taking the phone to the Nokia Care Center and replacing the mother (main) board is not (IMO) a reasonable cure for this problem.
The first step of bug fixing, is getting aware of the bug. Nokia Support Discussions are designed in such a crazy way, that this step might not have taken by this thread. I am just an end-user like you, but there are very different statements whether this board is monitored by internal support.
By the way, the next step is to reproduce this bug – for this, Nokia requires a faulty unit, normally. Therefore, I recommend to go for the Nokia Care Centre option – because waiting – until your warranty might be gone – might not be a good alternative.
Or stated differently: Sit and wait might end in catastrophe in this case.
Sensonic wrote:
I suppose it's not a hardware issue.
To double-check, we have Nokia Care Centre.
Sensonic wrote:
similar symptoms
Symptoms which sound similar, yes. Same Cause? I do not know.

Equium A100-338 - bad performance after display driver installation

The display driver recently updated and since then the performance has been terrible, and the windows experience rating has gone right down. I can no longer use a lot of programs, and the internet and programs that are still working are running horrendously slow.
I have looked for the old driver, according to the dxdiag, and it is no longer available. Any ideas?
Thanks.

Original driver was :
Card name: Mobile Intel(R) 945 Express Chipset Family
Driver Name: igdumd32.dll
Driver Version: 7.14.0010.1350 (English)
New driver is :
Card name: Mobile Intel(R) 945 Express Chipset Family
Driver Name: igdumd32.dll
Driver Version: 7.14.0010.1504 (English)
I tried the roll back, but the driver had been installed prior to the earliest restore point. it took me a while to work out what the problem was.

CLJ3600DN Printing upside down after new driver

So I did what HP said and installed a new driver for my Color LaserJet 3600DN. Now it prints unside down. Letterhead must go in upside down now. Also, when printing on both sides, only prints one way, flip page end to end. Anyone have any ideas?

It sounds as though the option for mirroring is on. Check your printer settings and make sure that mirroring is off.
Hope this helps.
Syd

Iphone device doesn't show up on the side bar after new driver installed. How do I fix this?

I had to install a new drive into my laptop. When I tried to download an audible book into my Iphone the device doesn't show on the side bar anymore. When I try to sync it from Itunes it doesn't do anything either. Any suggestions on how to get my phone device back on the side bar?

itunes/presentation/ show side bar

Mac OS X crashes after hard drive installation

I just recently installed a new Hard Drive in my iBook G4. I noticed that after I installed OS X 10.4.2 the OS started crashing every time it booted. Ive done an APPLE HARD WARE TEST to see if my iBook was Ok & it was. I did an upgrade from 10.4.2 to 10.4.11 & the OS still crashes. I formated the drive & installed UBUNTU LINUX 7.10 to see if UBUNTU would crash, I was thinking it might be the drive that is defective, but no. Ubuntu linux runs great with no issues, the drive I installed is a HITACHI drive model:HTS541616J9AT00 & OS X 10.4.11 crashes always. WHY? ANY IDEAS?
Message was edited by: isaisos

Jup they are the installation disks that came with my ibook g4, & I have done that before,What u just said. The OS will crash during the boot, but sometimes im able to use my mac for a while then it crashes. I was thinking it was the HARD DRIVE but no, at this moment my ibook g4 is running UBUNTU LINUX with no issues. The hard drive is a hitachi drive, the support website says it needs no DRIVERS for the iBook. It has to be the OS not supporting my drive??? maybe??
Message was edited by: isaisos

Soundfonts missing high frequencies after new driver installation

Similar Messages

Maybe you are looking for