Soundmax for 875 ASUS Driver or MSI Driver?

On the MSI site it has version:
a. WHQL Pass for MS-6758
b. Driver version: 5.12.01.3538
On ASUS Site is has:
Version  V.5.12.01.3630  Date  2003/06/30  
Description  SoundMAX Audio Driver version 5.12.01.3630 WHQL driver  
Is there a difference in SoundMAX which is on the board of the 875 or has MSI just not updated the site?
Please let me know,
BITZ

Although MSI claims to offer either AD1980 or AD1985 coded for 6758 boards, most current boards (at least the FIS2R's I have seen) are using only AD1980 chip.
Asus P4C800 is using AD1985 chip which has jack-sensing feature that doesn't apply to AD1980 equipped MSI 6758 boards.
So using the newest ASUS driver may not be that relevant for MSI Neo

Similar Messages

  • NVIDIA DRIVER OR MSI DRIVER

    i have MSI N770 2GB TF OC.
    do I have to install the driver from the NVIDIA site or from the MSI website?
    ======================
    I also have a MSI N760 2GB TF OC, a new use for 6 months, but already suffered damage.
    My PC can not boot, and the motherboard speaker (long beep 1x, 3x short beeps. (ASUS P8Z68 Deluxe motherboard).
    I was initially suspicious of my motherboard and also a component to my PSU (silverstone 760w Platinum) but sometimes also qualify boot, and into the windows. but at the time of entering the windows, when used to play games, then my pc restarts by itself. I then tried to replace the VGA card with the MSI N770. and there was no problem with msi N770.
      I actually had the misfortune. 3 times buy produck msi, and 2 times the damage. 1 produck 1 week old.
    Now I am planning to buy a Z97 motherboard msi gaming 9 ac. and the events that I experienced with msi n760, I think for a while about my desire to postpone the msi Z97 gaming 9.

    newest drivers include fixes and peformance optimizations
    so try latest one, go back to msi one only if you have issues with nvidia one

  • When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

    When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

    Hi Berriedale,
    Please try the below steps and check.
    Turn off any antivirus or software security program.
    Download the update patch 11.0.10 manually from the below link and run it.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
    Regards,
    Anand

  • MSI driver - new NVidia driver: MSI Info/Clock

    Hi,
    I first used the MSI driver for my new MSI NX6600GT-VTD128 AGP. I don't use any other MSI software.
    I now uninstalled this old NVidia (MSI) driver and installed the new NVidia driver. The "MSI Information" and "MSI Clock" tab remain. Do they still work (D.O.T. , etc)?
    Can these 2 tabs only be installed with the MSI driver on the CD that came with my card?
    Thanks!

    Quote from: MrBigA on 10-February-05, 23:31:35
    k tabs are controlled by msicpl.dll and will not removed, you will manually have to eradicate the file yourself. It should be in the windows directory but if you cannot find it just do a search."
    I now deleted the msicpl.dll from C:\WINDOWS but the tabs are still there.
    There is one more msicpl.dll in C:\WINDOWS\SYSTEM32
    Which one is the right one? Both? Or is one from Microsoft? Can I savely delete the one in \SYSTEM32 ? Should I restore the one in \WINDOWS?
    Thanks!

  • Can I but ssd drive in msi gt60 without bracket

    Hi guys,
    I have ordered the ssd drive ( samsung 840 pro 128gb) then I realized that I should have a bracket to put it in my laptop msi gt60 0nd  and it didn't came with the laptop
    So, can I put ssd drive in msi gt60 without bracket?
    If it not wich one should I buy

    Quote from: mods on 23-August-13, 00:05:41
    Egypt
    Oh jesus. Sadly, I visited there back in 2006. I had a great time back then. Now I think I'll stay away. >.<
    That being said, yeah, there isn't much you can do. I've had people paypal me money and then purchasing the part, and forwarding it to them (they were in AUS though).
    Not sure I can do that this time around again though. I'll be gone for a week too starting on Sunday, so yeah, I wouldn't be able to get to it for another 2 weeks. =/

  • Where can I download the iTunes64.msi driver. I can't update my current Itunes without this driver.

    Where can I download the iTunes64.msi driver. I can't update my current Itunes without this driver. I can't find it on Microsoft's website or Apple's website.

    You can't download the individual .msi files, but they can be extracted from the setup.exe files if required.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
    tt2

  • Update display panel from last nvidia driver with MSI VGA OC display ...

    Hello,
    I have a MSI NX7600GS under windows XP and I've update the last nvidia driver for ...
    But I loose my original MSI VGA OC display tweaking panel in windows xp standard display panel ...
    How can I update display panel with MSI VGA OC display tweaking panel and the last nvidia driver ?
     ???

    Quote from: AaronYuri on 29-March-07, 23:19:28
    Easy. Manually update the drivers.
    Go:
    My Computer > Properties > Hardware tab > Device Manager > VGA card > Right click > Properties > Driver tab > Update driver find the folder with the ForceWare driver > Click OK. Your done.
    You'll have to extract the drivers out of the .exe that they come in firstly mind.
    I want to keep my latest downloaded nvidia drivers and add official MSI OC tweaking in windows xp display panel, so ... you asked me to find the folder with the ForceWare driver : last (from nvidia) or previous (from MSI's CD driver) ?
    And how can I extact the drivers out of the .exe without launching install procedure ?
    Thanks ... 

  • MOVED: Using 4xsata drives with MSI K8N NEO2

    This topic has been moved to AMD64 nVidia Based board.
    Using 4xsata drives with MSI K8N NEO2

    Hi , yes unfortunately it's true !
    Sata ports 3/4 is the fully nforce3 native chipset integrated (uses nvidia integrated PHY).
    Use only theese if overclocking .
    Satallink clock will be retained at 100mhz always .
    Sata ports 1/2 are bridged from the nvidia chipset to an external marvell PHY .
    Theese ones can not be used with HTT ref clock beyond ~230mhz +/- a few mhz without producing data corruption .
    Satalink ref clock of 100mhz will scale upwards with increased HTT .
    This issue applies to all nforce3 250GB/Ultra based motherboards with more than 2 sata ports regardless which vendor/make/model.
    It's the chosen hw design that is the issue and no bios ever will fix it .
    If you must have 4 sata drives , do like me and install a pci SIL sata controller card for the drives used for storage .
    Take Abit NF8 (nf3) as an example .It has only 2 sata ports .
    Why ?
    Only the true/fully chipset integrated sata ports is used .
    Although the nforce3 chipset supports a sata link to an external PHY for port 3 and upwards some has chosen to not utilize it .
    Nforce 4 chipset has corrected this hw design by adding more sataport by the link to external phy .
    In nf4 four ports are fully/true chipset integrated , and does not suffer from this overclock barrier .

  • Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented.  is it wise to do this or should i not??

    just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented.  is it wise to do this or should i not??

    Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
    Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
    1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
    I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
    Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
    Best would be to ask in the TimeMachine section Snow Leopard
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
    where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

  • Can i use seagate goflex 3tb external hard drive for 2010 27" imac internal hard drive replacment if i take it out of the goflex case.do i need to format it before installation due to it allready having goflex software on it from manufacturer.

    i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.

    Hello
    formatted ntfs
    NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
    how to do that in video
    HTH
    Pierre

  • Can I use single computer for user os 2012 in d drive & domain os 2012 in c drive

    hi 
    I want to install windows server 2012 os in c-drive and d-drive as well and I want to make d-drive as a domain user1 (as if checking in the another user1 computer) and c-drive as domain/primary server computer (i.e, as if administrator creating users), Is
    it possible? please help me in this subject

    The only way that would work is if you virtualize the 2nd server 2012 installation.  When you setup the first server 2012 installation, add the Hyper-V role, and then create a new Hyper-V guest.  Using the whole D drive as a physical disk attached
    to the guest is possible, but there are gotchas you would need to be aware of.
    If you use that approach, you really should review the resources here for how to do it:
    http://technet.microsoft.com/en-US/evalcenter/dn528863.aspx
    I hope this post has helped!

  • Any ideas for a fix since my external drive for my iTunes Library failed...

    I had my large iTunes Library stored on an external hard drive.  The drive has now failed and my backup isn't working correctly.  When I go to my iTunes Library on my Mac, the songs, videos etc that were stored on the external library show up but when I click on them I get a message saying "The song/video etc ------- ----could not be used because the original file could not be found. Would you like to locate it?" 
    If I reload some of the songs (saw the ones I had originally imported from CD) back into my Mac, will I be able to access them again.  Will I have one song listed twice (as in one from the external drive and one reloaded) and then have to constantly try to pick which one works?
    It should be noted that person who originally set up on system including the iTunes Library external hard drive and my backup and who was my computer guru is no longer available for assistance.
    Thank you.
    Whirlybird21

    This does happen occasionally and it is caused by the formatting in the text that was copied from the original email into the reply.

  • Need a Driver for a New HP Laptop. Driver is Not Available on This Site.

    A customer of mine just bought two new HP Pavilion Dv7-1135nr.  For some reason they each have different DVD drives.  One works.  The other one, says its DVD drive needs a driver.  It has Vista, so I tried to update the driver via the web, and that didn't work.  Then I came to this site to find it on the laptop's product page, and it's not there. Does anyone know where I could track this driver down?  
    Again, the computer is an HP Pavilion Dv7-1135nr. The drive in question is called: HL-DT-ST DVDRAM GSA I 50L ATA Device. 
    (As I said, the other, seemingly identical computer which has the exact same model number has a different drive.  That drive is called: TS-L6332.  It will not work in the computer that is having problems.)
    Thanks in advance,
    Vincent.  

    This file from Doug Knox's site will do the filter edit automatically without having to mess around in the Registry.It was originally
    written for XP,but also works in Vista.
    http://www.dougknox.com/xp/utils/XP_CD-DVD-Fix.zip
    If this fails I would perform a complete System Recovery to reinstall Vista and drivers/software.Many times when a machine has problems
    out of the box,a Recovery sorts it out.
    http://tinyurl.com/2y4rub
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Recommendations, please, for external DVD writer for my 2006 iMac. (Internal drive unable to write coherently.)

    Recommendations, please, for an external DVD writer for my 2006 iMac whose internal drive is writing unreadable discs. 
    Model Name:          iMac
      Model Identifier:          iMac5,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.16 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          4 GB
      Bus Speed:          667 MHz

    Thanks, A Brody.  Don't know what the PRAM battery is.  Here are more details of the fault ... Although I've had the iMac for 5 years this may be the first time I've tried copying a video recording onto the DVD drive (I've made lots of CD copies without a problem).  The folder and files all seem to be reproduced in identical order on the disc but my domestic DVD player cannot make sense of the recording, unlike the original source DVD from which the files originated.  The drive has always been noisy but I've never assumed it shouldn't be!  Does this fit your PRAM battery theory?  If so, please explain more.  Thanks.

  • I just bought a WD external HD but it is formated for windows. It says the drive has to be reformatted for Mac. How does one do that?

    I just bought a WD external HD but it is formated for windows. It says the drive has to be reformatted for Mac. How does one do that?

    shldrtothewheel
    http://lmgtfy.com/?q=youre+awesome+

Maybe you are looking for

  • How can i change my main email address?

    Need to know whow to change my main email address for game center and icloud

  • Problem in saving layout in ALV's

    Hi all!      I am getting a strange problem in ALV's .For an ALV report some users are able to save the layouts where as some are not able to save .Why is it happening so? I have mentioned IS_SAVE = 'X' in my func.module REUSE_ALV_GRID_DISPLAY.Please

  • Firefox won't display Courier

    Firefox 14 simply won't display Courier on my system. Every instance of Courier is replaced by Courier New, and it makes my website look improper (I want the aliased look of the original Courier font). Why won't Firefox 14 use Courier?

  • User Master Record : Which table the Email Id stored?

    Hi All, Which table and what is the field the Email id stored in. I checked the USR02 and some other tables and I did't find it. Thanks. Rgds, Raj.

  • Visited Links - changing the colour.

    Following the enormous success I had with a problem I posted yesterday - I have decided to test the water of the professionals again. I have set up a home page which I intend to use as a template for the rest of the pages/links. I have a Spry menu ba