Soundmax XP driver unstable in Windows 7

I recently upgraded my Pavilion zv5000 (PC742AV) from Win XP Pro to Win 7 Ultimate (32-bit). Everything went fine except that the only audio driver that "works" at all is the one for Win XP, it's version 5.12.1.5170 from 7/8/2004, and downloaded from HP. And by "works", I mean that virtually every time I stop watching something in VLC or try to watch some Flash video, something in the audio sub-system hangs/crashes/whatever and I get no sound untill I restart the audio services by running the following batch file:
@Echo off
net stop Audiosrv
net stop AudioEndpointBuilder
net start AudioEndpointBuilder
net start Audiosrv
pause
Now, while this work-around is functional, It is far from optimal. So, does anybody know of a more permanent fix or a more current driver that will work with Windows 7? I have tried the ones from CNET, Realtek, and Windows Update, none of which have worked.

Hi:
Maybe try the Vista driver from the dc7100 desktop?
Run it and if the auto install doesn't work, try the manual install and browse to the installation folder that was created when you ran the file located in C:\SWSetup\sp36530.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

Similar Messages

SoundMax audio driver did not load after returning from StandBy.

After my computer returns from StandBy, it shows me this message. "The SoundMax audio driver did not load. You may need to reinstall SoundMAX". I have downloaded and installed the latest driver that was supposed to fix this issue on Windows XP T61. Is there another solution?

Hi,
I wanted to confirm, that this issue occurs also to me, and started happening recently. Also the driver sometimes does not start when simply booting clean (not returning from StandBy). I'm not sure, but I think this started happening after some driver update (I do upgrade my drivers when lenovo updates them hoping they'll fix some of the annoying glitches, but this is what I usually get...).
My machine is: lenovo t61 7664-19G
And I also have: windows XP
If someone more tech-able would like to investigate this, I would be happy to supply all the details.

ADI SoundMAX Audio driver latest update

Hi Everybody:
TVSU shows this ADI SoundMAX Audio driver (version 5.10.01.6380-0005 released 2009/02/18) as the latest for my system. Actual version installed is 5.10.01.6380-0002 which I downloaded from the matrix in April when TVSU still wasn't available.
As I use to check on any additional info before confirming TVSU to install it, I found the following "Note" under "Additional information>Systems supported" (Please note that this "Note" is not contained in the readme file):
"On Windows XP (version before SP3) and early version of 2003, you need to install a QFE to allow a HD Audio driver installation. This QFE is made available by Microsoft and it is required to update the Operating System components before installing the audio driver. The QFE contains the required files and readme files which outline procedure. This QFE and files are distributed by Microsoft only, please contact them directly if you need to get them."
Questions:
1) As I have SP3 installed, I don't need it?
2) This implies that SP3 contains the QFE?
3) If so, why didn't need it before SP3 if SoundMAX has been always present? i.e. came preinstalled on the system.
4) What's this QFE anyway? and if anybody can show me a Microsoft link to it, because my searching didn't.
Regret my ignorance, but...anybody?
Thanks in advance and Regards,
RickCP.
RickCP/ThinkCentre A55 8705-AG1/Windows XP Home Edition SP3.

Hi,
I wanted to confirm, that this issue occurs also to me, and started happening recently. Also the driver sometimes does not start when simply booting clean (not returning from StandBy). I'm not sure, but I think this started happening after some driver update (I do upgrade my drivers when lenovo updates them hoping they'll fix some of the annoying glitches, but this is what I usually get...).
My machine is: lenovo t61 7664-19G
And I also have: windows XP
If someone more tech-able would like to investigate this, I would be happy to supply all the details.

I am missing a driver now for soundmax audio driver

Need to reinstall Soundmax audio driver .I have a Touchsmart 300-1020. I have an updated version of windows 8.1. I let a third party try to update drivers. Screwed up everything. Did a restore and now no audio driver. Help pleaase.

Hi:
Did you try reinstalling the W7 Soundmax driver from your PC's support and driver page?
Original Analog Devices SoundMAX Digital HD Audio Driver
File name: sp44371.exe
Many W7 drivers will work on W8/8.1.

Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode

Purpose of this post:
Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
Why am I writing this:
I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
History:
As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
How does UEFI works (in a nutshell):
Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
Advantages of UEFI:
    It can integrate various drivers this will not require to load during booting so saves time.
   PC can connect to network without OS.
   Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
   Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
   Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
Step by step tutorial:
1.   In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
2.   Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
3.   After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
4.   Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
5.   Now go to the folder W7pro64bit and do the following:
a.   Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
b.   Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
c.   Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
d.   Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
e.   Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
6.   Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
7.   Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb. Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
8.   Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
9.   Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
10.   Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
11.   If everything is done correctly, your computer will boot from the USB.
12.   Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
13.   Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
14.   Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
15.   When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
16.   Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
17.      Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only basic drivers support.
Note: if tvsu will fail to work, see this:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
Final words:
From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
Have fun!
abvasili
Moderator note: changed subject to match new content. Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

seanare wrote:
Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI. From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
Thank you again good sir.
You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

How to Back up iPhone to External Hard Drive on Mac/Windows

How are you to Back up iPhone to External Hard Drive on Mac/Windows?I need to Back up iPhone to my External Hard Drive on Mac computer,Whether have you more method to help me quickly to Back up iPhone to External Hard Drive on my Mac?If you have more method to solve this question,I will thank you very much,I'm looking forward to your answer.Best wish: Merry Christmas !

How are you to Back up iPhone to External Hard Drive on Mac/Windows?I need to Back up iPhone to my External Hard Drive on Mac computer,Whether have you more method to help me quickly to Back up iPhone to External Hard Drive on my Mac?If you have more method to solve this question,I will thank you very much,I'm looking forward to your answer.Best wish: Merry Christmas !

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
Mylenium

Can I use a time capsule as a usb drive on a windows 7 machine?

Can I use a time capsule as a usb drive on a windows 7 machine?

No, but you can use it as an Ethernet or wireless drive.
(60698)

How to access external drives while in Windows

Using VMWare Fusion as the system hosting Windows XP. Have specific programs in Windows only but of course they work much better on the IMac. I edit a ton of video and have the vids all stored on eternal drives. These drives are read by the Mac and all show up on the desktop and are accessible for all Mac programs.
Here's the issue. I need to access those external drives from a Windows video editing program being run thru Fusion. The Windows program is accessing a folder via "Shared folder on host" but the only folders showing up there are the ones listed under "Home" om "My Places". I'm sure this is nothing more than a setting but I am in need of help! All my editing is held up at the moment so any assistance is greatly appreciated for this Apple rookie. Thanks.

I don't have my laptop with fusion loaded, so I can't think of the exact terms. However, you should be able to set the shared folders in the settings for the virtual machine. The ones you see are the default setup, but you can define more paths to view while in Fusion.

HT204053 I recently replaced the hard drive on my Windows 7 computer and lost all of my music content. It should be on the iCloud, however. How can I get it back to iTunes? Can I "reverse-synch" and send it FROM my iPhone TO my computer?

I recently replaced the hard drive on my Windows 7 computer and in the process lost all my music. I think it should be on the iCoud. Can I get it back from the iCloud to my computer? Or can I "reverse-synch" FROM my iPhone TO iTunes?

All the music you purchased from iTunes can be re-downloaded, all the music you acquired without purchasing from iTunes can be accessed using Senuti (not free). The combination of these 2 will get your music back.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Cannot access mac fusion drive in bootcamp windows 7

My Fusion drive imac cannot access the Mac fusion drive in bootcamp windows 7. even I installed the bootcamp 4.1on windows 7. It is trouble as I cannot get my file in the mac drive in windows.
I don't have this problem in my old imac 2008.

See iMac (27-inch, Late 2012): Boot Camp alert with 3TB hard drive

HP970Cse driver fails in Windows 7 64 bit

Help, can't install 970Cse printer driver in Windows 7 Pro 64 bit.
Tried - using USB auto install. everything progresses well and get a green check, however printer does not work. Error message that driver is not installed on this computer and promps for reinstall. After reinstall that same error message- driver is not on this computer
Tried - manual install using Add Printer. Undated printer driver list from Windows Update. Selected 970Cse driver. Still not working. Tried both "use driver currently installed and replace current driver" and both result in error message. "Unable to install printer. Some driver files are missing or incorrect. Reinstall the driver or try using the latest version". Did Windows Update again and same error message.
Tried - HP Install Wizard. After finding Deskjet 970 Cse, said this is a non supported printer.
I have installed this printer easily on a Win8 64 bit laptop a few weeks ago using USB. No issues.

My company gives me a new notebook every three years. The last computer I had was also HP Elitebook Window 7 64 with an i5 processor, but this new notebook with i7 processor, has issues finding a driver for my personal printer the HP 970 Cse. I came to this forum hoping this had been resolved.
I have been in a queue for HP SmartFriend support for approximately one hour.
I cannot understand why HP doesn't have these drivers available to download.
I wonder if there is a way to copy the drivers from my old computer?

Soundmax XP driver unstable in Windows 7

Similar Messages

Maybe you are looking for