Sounds at Night Time: Alarm/Calls = On, Everything Else = OFF??

Hello,
i am searching for days for a good solution to handle those notifications at night time on my iphone. I searched the internet in english, german and russian, but i was not able to find a official solution for my problem. Only jailbrake apps like MyProfiles seem to work, but i am not going to jailbreak my phone.
So here is the problem. I have iPhone 4 with IOs5. When i go sleep, i want to put my iPhone into silent mode. BUT
1. I still want to hear if somebody is calling me and i want to be able to use the alarm function to wake me up.
2. i want to disable both sounds and vibration for !!any!! other notification, like all kinds of push services: email, facebook etc.
I think i am not the only one with this problem and there should be a suitable official solution for this.
Regards,
eXtide

Unfortunately, there aren't any fully customizable profiles like BlackBerry had. However, if you want to have a way for your phone to have zero ringers other than the alarm, you can. Just plug a pair of headphones into the headphone jack and all sounds (text alert, etc.) will play through the headphones while the alarm still plays through the speakers on the bottom of the phone.

Similar Messages

HT1349 my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

Why can't I make or receive calls but everything else is working fine.

Why can't I make or receive calls but everything else is working fine?

For that you have to talk to your carrier, what did they say?

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from Woodridge

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

TS4268 Hi I can't set up my face time or iMessage but everything else is set up password wise

I can't turn on my FaceTime or iMessage yet everything else works

LaPastenague is correct in saying you need to setup the Time Capsule in bridge mode. It sounds like you are using a modem router combo.
Just get a regular ethernet cable(same as a "patch cable") and connect it from the LAN port on the modem to the WAN port on the Time Capsule. Go through the setup as normal and if it asks you to put it in bridge mode do so. (if you are using Mac OS X 10.6.8 or earlier it will prompt you for it. If you are using a Mac OS X 10.7.5 or later it will automatically put it into bridge mode if it is receiving a private ip address).
To verify bridge mode:
10.6.8 or Earlier: Airport Utility > Select Time capsule > Manaul Setup > Internet Icon Along the top > Internet Connection Tab > Connection Sharing. If it says "Share a Public IP" Switch it to Off(Bridge Mode)
10.7.5 or Later: Airport Utility > Click on the Time Capsule > In the window to the right of it click "Edit" > Network Tab > Router Mode. If it says "DHCP and NAT" switch it to Off(Bridge Mode)
Hope this simplifies things....
Jesse

Miscalculation of time alarm is set to go off.

When turning on my alarms Sunday night ( actually Monday moring at 12:04 AM ) which is means my alarms will be going off in 6-7 hours and my Charge says this....

TamaraH_VZW wrote:
GreenRobot
I was able to reproduce the same issue on the Droid Charge
I have found that when I am entering the info for the alarm, I have to click on the "repeat" link, and reclick on the "once only" line, and then click save. That always ensures that it is set to go off the following morning (or sooner, such as if you have a time set for later that day). I have found if I dont go back in and reclick on the "repeat" link, the alarm wont go off until it is the same day as the last time I set the alarm.
I can't imagine that anyone should have to go through so many steps just to create an alarm.
I will see if I can lift this up to Samsung.
Thanks I will give this a try.

Lync 2013 Mobility Client - Video Call Issue (Everything Else works).

Hey Technet’ies,
I have been struggling for a couple of weeks now to resolve one of the final issues with a Migration/Upgrade Project on Lync Server 2013.
I have nearly every Lync Client Scenario working well except the Mobility Client (outside of the domain) which cannot successfully complete a Video
Call to a Windows Desktop Client (inside the domain) – the toast pops up, but when we click accept - it just times out after 15 seconds
K
The strange thing is every other Video Call scenario works;
Mobility Client (Outside Domain)
àWindows Desktop Client (Inside Domain)
= Unsuccessful
Mobility Client (Inside Domain)
à Windows Desktop Client (Inside Domain) = Successful
Mobility Client (Inside Domain)
à Windows Desktop Client (Outside Domain) = Successful
Mobility Client (Outside Domain)
à Windows Desktop Client (Outside Domain) = Successful
Mobility Client (Inside Domain)
à Mac Desktop Client (Inside Domain) = Successful
Mobility Client (Inside Domain)
à Mac Desktop Client (Outside Domain) = Successful
Mobility Client (Outside Domain)
à Mac Desktop Client (Outside Domain) = Successful
Mobility Client (Outside Domain)
à Mac Desktop Client (Inside Domain) = Successful
Mobility Client (All Scenarios)
à Mobility Client (All Scenarios) = Successful
Our setup is pretty standard;
All OS servers are Win Server 2012 R2
Lync 2013 Standard FE Server
Lync 2013 Edge Server
Reverse Proxy IIS AAR (Also Win Server 20012 R2)
Lync 2013 Desktop Clients, Lync 2011 Mac Clients, IOS and Android Mobility Clients – all latest versions.
External NAT (via Cisco Routers ACL’s)
Internal Windows Firewall Currently off on all Servers
All Certs / DNS Configured as per Technet Recommendation
I have reviewed / analysed a number of log/trace files – looking for some/any information on the problem;
Mobility Client (cmlogX.log)
Windows Desktop Client (*.etl) / Microsoft Message Analyzer
Lync 2013 Server (CSController)
With all my looking I could not make out an error except a timeout (15 seconds) on the Mobility Client log (which I currently can’t find).
Clearly we are missing something and I have gone up and down our implementation a number of times, the only semi-unknown is our old 2010 Pool / Central Management Server (which is currently pretty much redundant but the majority of users still on).
I would really appreciate any feedback anyone can provide or any insight anyone may have on this challenge.
Thanks in advance, Alex.
Alex

Hi Andrew,
Thanks for the quick contact!!
Sorry - typo in my post, I have now corrected it;
Mobility
Client (Outside Domain) àWindows
Desktop Client (Inside Domain) = Unsuccessful
So I completely missed that blog post of yours (out of the 100's I have read) and you are the first person to clearly say (in simple terms) to point the lyncweb.contso.com to the public IP address on my internal DNS, I have just made that change and see
if it will correct the issue - will wait for replication.
Also I am running IIS / AAR as Reverse Proxy (not ISA) and had the Internal DNS Host A of lyncweb.contso.com and lyncdiscover.contso.com point back to my Reverse Proxy Internal NIC (i.e. 10.1.1.32) as the External NIC is isolated on in the Perimeter Network,
is this correct?
So it now goes like this
*Inside Domain*
lyncdiscover.contson.com --> 10.1.1.32 (Reverse Proxy Internal Nic) --> 10.1.1.26 (Front End Server)
lyncweb.contson.com --> 201.183.0.1 (Reverse Proxy External Nic - Public IP) --> 10.1.2.16 (Reverse Proxy External Nic) --> 10.1.1.26 (Front End Server)
Does this make any sense, I know ISA and IIS/AAR are pretty much interchangeable.
Thanks again Andrew and look forward to any feedback,
Alex.
Alex

Very low sound volume on Skype, but OK on everything else

I know this subject has already been raised but I have tried all the suggestions on other posts on this topic, but still the volume of Skype is very low. I can only hear the conversation in a very quiet environment. The same low volume applies when I check the sound in Skype or do a test call. I am using an Acer laptop (built in speakers) and Windows Vista which is up to date. All sliders on the sound mixer are on 100% and the box Automatically Adjust Speaker Settings in Skype is unticked. I am using a recent version of Skype (installed about a month ago) The sound volume on iTunes and other applications is absolutely fine! Please keep explanations simple, I am not a computer expert... Thank you!

Skype was working then became very quiet.I am on Win7/64 Creative soundcard, Latest Skype
The solution (for me) was simple.
Go to: Skype>Tools>Options>Audio Settings>Speakers
In my set up there is a dropdown to select what speakers Skype should use. It was using Digital Audio Interface There was also another option called "Speakers" I chose speakers and the volume returned to match the rest of the system
How it got set incorrectly is a mystery. I guess "Gargy Watts" must have set it, as my old mum used to say... or the Skype Fairy has been fiddling, as I have other things on my mind rather than fiddling with Skype settings and I'm the only one to use the PC!
I hope this helps some of you guys and gals

My 3gs has stopped playing through the speakers and when the headphones are plugged in only plays through one ear? it still ring when called and everything else seems fine, whats the problem? it seems like the phone thinks the earphones are always in?

my 3gs has stopped playing music through the speakers, they play with headphones but only through one ear. It seems the phone thinks the headphones are in all the time. The ringer still works when called and i have cleaned the headphone socket the best i can without damaging the phone! Any ideas?

I had the same issue, 4s running ios8, but the plugging and unplugging the headphones did not work, BUT, when I tried plugging and unplugging from the DOCK, it started to work again. There must have been a short in the power plug, not the headphones. I also blew out the bottom power plug with computer safe airjet. Hope this one helps anyone else having the issue.

Every new function causes (not responding), takes a long long time for each operation, everything else on new I7 laptop is fast.

I installed firefox 4 and it starts slow but every function I try causes the term (not responding) on top and it can take several minutes for the function to finish executing. My PC is only 6 mos old with I7 processors, run Panda security software, I did all that your Troubleshooting instruction said to try but still not working correctly.

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

After updating to Mavericks I can't open iTunes. I keep getting a popup telling me to unclick "run in 32- bit mode" in iTunes info. I have done that several times and rebooted. Everything else seems to be working fine.

After updating to Mavericks, I can't open iTunes. I keep getting a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.

What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?

I updated my 4s to iOS 6.0, now i can no longer make phone calls. Everything else works.

I updated to the new iOS 6.0 software for my iphone 4s and now every phone call I make is ended before it rings. Messaging, voicemail, facetime, wifi, 3G/4G network are all still working. I've turned it off then on and reset the network settings and still nothing. any other ideas?

1. Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple Logo appears
2. Settings > General > Reset > Reset Network Settings

I got a new iphone and i clicked on restore from my old ipod, but then it deleted everything else off my iphone, is there any way to undo it or get my pictures, messages and contacts back?

please help me! 'i have only had it for a week

iTunes did exactly what you told it to do, restore the iPhone with the backup from your iPod. What did you want/expect?
Unless the iPhone had been backed up previously, all content that was on it is gone.

No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on. I can hear tones when I go to change them. I can hear my music. I can hear talking on videos I have taken. I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
When I put it in speaker phone I can hear but not voices through the phone.

At the time of call when i use speaker my sound is not visible to the prsn i call

at the time of call when i use speaker my sound is not visible to the prsn i call

Hello smarty007,
Thanks for the question, and welcome to Apple Support Communities.
From your description, it sounds like you are having issues with others hearing you while using speakerphone. For these symptoms, the following article provides the most relevant information. On the iPhone 4, it is commonly due to a third-party case blocking the top microphone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Additionally, you can check out these articles:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks,
Matt M.

Sounds at Night Time: Alarm/Calls = On, Everything Else = OFF??

Similar Messages

Maybe you are looking for