Sounds drops in a middle of a project

Hey everybody,
I exported a premiere pro (cs4) project to encore, and when i'm playing it in encore there is a point where the sounds stops without any apparent reason.
any idea why?
thanks,
Noam.

This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Also include, step-by-step with complete details of everything you did from import to PPro all the way through every step you too to and in Encore

Similar Messages

Garageband sounds goes missing in the middle of the project

in the middle of my projects I get a "file not found result error = -43" when I click on garageband sounds. I copied the sampler instrument folder from garageband and placed it in the sampler instruments folder in logic. But they still load up and in the middle of the project go missing again. I use redmatica's exs manager and re-linked to that folder and still the same results. any idea what is happening here?

Could be that something is too short to fit somewhere, but if it's happening all the time it's probably house keeping time.
Trash the FCE preferences, repair the permissions and re-boot.
Al

46 minutes in movie all sound drops out

I am extremely frustrated, I have one on one and they could not help me. Please Help, for the last 4 weeks I have been trying to burn a 53 min video from FCS using I-movie 08 and 46 min into it the sound drops out. I have tried all the advise posted in the last Month.

Just a thought...how are you importing the movie into iDVD? If you are sending it from within iMovie, try importing it directly from within iDVD. Select 'Media' and then 'Movies' locate your movie and drag/drop it onto iDVD's main screen, being careful not to put it into a drop zone.
I also suggest that you recreate your iDVD project. I don't think the problem movie clips are corrupt because they worked in another iDVD project.

FCP5 and Sound drops/pops

Hello,
We captured footage from mini-DV tapes using FCP5. The footage on those tapes was recorded in 24p normal during production.
We captured the said footage with the NTSC Easy Set-Up in FCP5, before doing a pulldown with Cinema Tools.
The footage we got was at 23.98fps.
Good.
... until we started to notice sound drops and pops in some of the captured footage -- drops and pops which do not exist on tape.
Why are we getting the bad sound quality?
Did we miss something?
Thank you.

- The media is stored in a special folder called "23.98fps files" on our drive, a 400G Glyph.
That folder is the folder from which we imported the files we're editing in FCP5.
- The project file itself is located in its own folder, the one that contains the scratch disk.

Sound drops off when using hdmi outport to connect computer to an AV reciever

Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.

Hi peter,
try to repair your permission by open application folder > utilities > disk utility > repair permission.
It should fixed the unexpectedly quit for several applications.
And try to get latest info from Griffin sites, maybe this one will help too:
http://www.griffintechnology.com/support/article.php?artnum=314
ps: why not try macbook built in microphone?
Good Luck.

Sound drops off after 15 minutes after upgrading from windows 7 to Windows 8.1.

I upgraded my PC from Windows 7 to Windows 8. Then, from Windows 8 to Wimdows 8.1. When playing a Movie I've downloaded from iTunes it plays normally for a good while. Then, after 15 minuites or so the sound drops off. If I close and reopen iTunes it plays again for about the same time. I had to do that five or six times to get through a movie. I've tried installing the latest sound drivers, uninstalling and reinstalling the latests iTunes with no luck fixing the issue. I have my PC connected to my TV via HDMI cable. Any suggestions?

Hi,
You could download and install the trial version of Photoshop Elements 12.
For your serial number, try this:-
Go to Adobe.com and there should be a button to Manage account - click on that and sign in with your Adobe Id.
Click on View All under Plans & Products
Click on View other products
After a short while, you should see your Photoshop Elements appear and you can expand it to see your serial number.
The serial number can be entered into the trial version to activate it.
Do you have your catalog and images?
Brian

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

Deleting bars in the middle of a project

I want to remove a certain number of bars of music in the middle of a project, say bars 12-16, and have the original bars 16+ renumbered. Is that possible? If so, how?
It's an all real instrument project (with a bit of unnecessary space) and I've tried selecting all the following bars and moving them - and that works - but the volume and pan controls don't move with them, they stay where they were.
Also, I have not been able to extract imported audio regions on their own without going through the exporting route. Any simple way of selecting a region and copying or exporting it?
Thanks

I've tried selecting all the
following bars and moving them - and that works - but
the volume and pan controls don't move with them
That is the only way, and yes, the Curves do not move with the region, they are, unfortunately linked to the track, not the regions within the track.
Also, I have not been able to extract imported audio
regions on their own without going through the
exporting route.
That is the only way.
--HangTime [Will Compute for Food] B-|>

Sound drops only when using one Airtunes speaker

Hello,
When i connect to one Airport Express with Itunes, the sound drops every 3 seconds. But when i connect to multiple Airtunes speakers or one Airtunes speaker plus the pc speaker everything works fine.
-Both Airport Express stations are connected via a wireless router trough the ethernet port and have the wireless disabled. (pc --[wireless]-> Router --[ethernet]-> Airport1 & Airport2)
-i've used different settings buffer sizes.
I've searched the discussion but found nothing about the same problem. Can someone help me with this issue?
Thanks
Windows 2000
Windows 2000
Windows 2000
dell Windows 2000

well, what'd you do to fix it? was it a bad headphones cable/jack or just not plugged in all the way?

In the middle of a project, but trial is up.

I'm in the middle of a project, but my trial is apparently up. Is there a way to finish my project? If I order photoshop, will it allow me to finish it?

Yes, if you purchase a subscription to Photoshop CC, you can continue working on your project. If the trial you have is CC, you don't need to reinstall it, just sign up, then sign in with your Adobe ID.

Intermittent Sound Dropping When Streaming Audio

I've just step up my new Apple TV and streaming from my shared iTunes library over wireless network is great.. However when I stream using airplay on my iPad 3 or iPhone 5 the sound drops intermittently, as if the signal wasn't getting through, if you know what I mean! sometimes drops altogether and airplay on the device seems to switch off.
I can't see any settings that I could change even if I wanted to (or knew what to!) and it seems strange that it works fine from the pc but not from the other Apple products.
The wireless signal is obviously ok, or could it be the wireless bits n the iPhone/Pad are not as good as in the pc? Clutching at straws a bit here, hope someone out there can help.
Thanks.

Thanks for posting this because I too have the Pioneer VSX-1019AH and have just noticed this problem. I rarely listen to my iphone (ipod) through my receiver and this problem never occured before until yesterday.
I am experiencing a sound loss at random times, and it takes restarting the receiver, or disconnecting then reconnecting the iphone cable to get the sound back again, only for it to go off again in a few moments time.
Whilst the sound is off, both the iphone and receiver are continuing to play music because you can see the title of the tracks change on both devices. So where the fault lies is hard to tell but I'd say it's with the ios4.
I don't know whether Apple will provide any support regarding this problem but I do notice the receiver has been endorsed "made for ipod" which means it meets Apple performance standards.

How can i get rid of sound effects icon in middle of screen?

How can i get rid of sound effects icon in middle of screen?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

Sound dropping when iPod connected to stereo - iOS 4.1

Why is the sound dropping when watching videos from the iPod when connected to a TV?
I have a Pioneer VSX-1019AH-K AV receiver with this nice setup (cable and functionality) that lets me watch videos on my TV with the iPod connected to the AVR (USB + composite video cable). The result is not bad, with better video than audio.
HOWEVER after upgrading to iOS 4.1 the sound (not picture) is dropping after various intervals of time (1 - 20 minutes) while plugged into the AVR. When I unplug the connection the video stops and the iPod goes back to the menu. The audio plays normally when restarting the video without the cable and continues to play normally when I plug the AVR cable back into the iPod. On occassions when plugging the AVR's cable into the iPod the sound does not come back, though unpluggin and plugging in again usually does it.
Anyone else have similar issues? I see some issues with apps and battery life under iOS4.1 and a few issues with audio / picture playback:
http://discussions.apple.com/thread.jspa?threadID=2579535&tstart=15
http://discussions.apple.com/thread.jspa?threadID=2577571&tstart=15
http://discussions.apple.com/thread.jspa?threadID=2582339&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2582478&tstart=30
http://discussions.apple.com/thread.jspa?threadID=2578926&tstart=0
Have people had similar problems when iPods are connected to AVRs or TVs through composite or component cables? I realize the quality of sound / pictures from the iPod is not superb though it is as good as my sattelite dish. I could just have a computer connected to the AVR via HDMI or similar but well that would mean having a computer just for iTunes.

Thanks for posting this because I too have the Pioneer VSX-1019AH and have just noticed this problem. I rarely listen to my iphone (ipod) through my receiver and this problem never occured before until yesterday.
I am experiencing a sound loss at random times, and it takes restarting the receiver, or disconnecting then reconnecting the iphone cable to get the sound back again, only for it to go off again in a few moments time.
Whilst the sound is off, both the iphone and receiver are continuing to play music because you can see the title of the tracks change on both devices. So where the fault lies is hard to tell but I'd say it's with the ios4.
I don't know whether Apple will provide any support regarding this problem but I do notice the receiver has been endorsed "made for ipod" which means it meets Apple performance standards.

I am running Elements 10 on Yosemite 10.0.1 and it crashes in the middle of every project. Is there a work around?

I am running Elements 10 on Yosemite 10.0.1 and it crashes in the middle of every project. Is there a work around?

Did you delete the preferences on upgrading to 10.10? If not:
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

Sounds drops in a middle of a project

Similar Messages

Maybe you are looking for