Sounds from iMovie to iTunes

I want to use some of the ambient sounds found in iMovie for sound effects for a school theater production. How can I get them into iTunes so I can burn them to a CD?
Thanks.

The dial tone, the phone dialing and the phone heard ringing as through a speaker phone. Those are the most important. They are in the Work-Home section. The .caf extension doesn't seem to play anywhere else. I tried to bring just sound into a new project in iMovie, but that isn't working.
Any ideas would be great.
Thanks.

Similar Messages

Trying to put my movie from imovies onto itunes but it does the whole download then at the end comes up with error - 34 or error - 41

trying to put my movie from imovies onto itunes but it does the whole download then at the end comes up with error - 34 or error - 41

-34
dskFulErr
Disk full
-41
mFulErr
Memory full (open) or file won't fit (load)
Seems like it's having either a RAM or Hard Drive issue. What happens if you reboot the Mac, open iMovie and then try to Share to iTunes again?

Max resolution and format for Apple TV from imovie and itunes

I use iMovie '09 to make movies from my HD 1920x1080P camera that I SHARE to mobile me, itunes and for use on Apple TV via itunes.
I am trying to figure out the max resolutions and formats.
If I SHARE from imovie with 960x540 it goes right into itunes and shows as an HD movie on the Apple TV
If i export from imovie in 1280x720p i can drag into and play from itunes however it doesnt show up on the Apple TV? i thought the apple TV supported 720p? is the format wrong? when you export it comes out as .mov and when you SHARE it comes out as .mp4?

I have been struggling with this for some time. We have great HD cameras, and fairly capable consumer grade video editing capability with iMovie; but we have limited HD viewing opportunities other than a computer.
Apple TV does play it in 720p provided you meet the specs below - perhaps your 720p movie exceeded these specs. You see, there is 720p, and then there is 720p with serious Mbps.
At least for me, when I export at 720p @ 5Mbps the viewing is jittery and not smooth. I guess it is too much processing, although it seems to work fine when it is a downloaded movie in HD, just not an iMovie production.
So, I just use the 960x540, which is clear and smooth, and wait for the day an improved Apple TV hits the market with the processing power to smoothly handle 720p and beyond. I have a big (100") screen, so I can use all the resolution I can get to keep that large of an image sharp.
The alternative is to use a Mac mini and route through HDMI to your TV. That does a good job but is more expensive (triple) the ATV.
Video formats supported:
H.264
up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution 1280x720 @ 24fps, 960x540 @ 30fps) in .m4v, .mp4, and .mov file formats
MPEG 4:
• up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution 720x432 @ 30 fps) in .m4v, .mp4, and .mov file format

Loops in red & importing sounds from iMovie

There are some loops in red and I have tried to import them through setup but it says they are open, also when I try to import from iMovie it says "NOT INDEXED"?

answered

Poor Audio in project, when sent from imovie, using itunes

Help! I have my music video all done. I clicked on "create idvd project". When I view my video in iDvd the audio sounds horrible. I am using a song I had in my iTunes library (straight from a cd). This happened for the first time the other day. I just deleted and "resent" and it worked. That is not working with this project. Any solutions? Thanks!!!

I have a similar problem. I created a movie using iMovie HD, using photos from iPhoto, as well as clips and short movies. I added music from iTunes. When I click "create DVD" the project shows up in iDVD completely devoid of any audio at all! I have restarted my computer, and saved the project prior to requesting "create DVD."
Help!! Whazzup?

Movies Imported from iMovies to iTunes impossible to rename

Hi,
I want to watch my movies from Front Row. This application goes to the Movies section in iTunes to access the files that I've imported to iTunes from my iMovie folder. So far so good.
However, because when I "add to library" in iTunes a movie that I've made in iMovies the movie is imported as "small" or "medium" it remains tagged as that in the iTunes movie library.
When I look for movies via Front Row I get a load of movies titled small or medium. Is their any way to rename the files in iTunes? In iTunes you can't do that - or I don't know how. I tried to rename the files by first having them open in Finder (which does allow you to rename them) but then Front Row doesn't see any content in the file and won't replay a renamed movie !!!
Can anyone help ?
Thanks.
Message was edited by: TheStormbird

use this app to convert the .avi into an iTunes friendly format.

How do I send only the sound track from iMovie to Media browser?

I need some wild sound for an iMovie 09 project I'm working on in Garageband (working on the soundtrack). I want to take some wild sound from a clip in iMovie and export it to the media browser so that I can use it in the project in Garageband. I detached the audio on the clip in iMovie and tried deleting the video, but it deletes the detached sound as well.
Any tips, tricks, or solutions on sending just the sound from iMovie to the media browser would be much appreicated.
thanks

With the project open, from iMovie's menu select "Share > Export using QuickTime". For the Export option select "Sound to AIFF". Give it a name and select your Save location. As far as I know, you can't save to the Media Browser as this is contained in the project's package contents folder. So save it to a convenient location (such as your Desktop) and navigate to this from GarageBand. It's probably best if you firstly move the file to, say, your Music folder or iTunes before using it in GarageBand. Otherwise, the links may be lost if you later move it from the Desktop (whereas you are less likely to move it from Music or iTunes).
John

No Sound in iMovie 10 imports

Hi everyone,
i've made several screen recordings and wanted to edit them with the newest version of iMovie. The video clips are all having sound while playing them with QuickTimePlayer and VLC Media Player, but as I imported them with iMovie, the sound in the video was lost. Can you help me?
I'm looking forward to your suggestions.
Greetings from Germany.

Hey there. You might have been bitten by the
installer permissions problem. Open Disk Utility and
repair your permissions. There is also a QuickTime
7.1.2 installer available.
Finally, try forcing prebinding to run. Open a
Terminal window, and type the following:
sudo update_prebinding -root / -force
This is useful for repairing system slow-downs, but I
have also found that this will fix situations in
which I have done updates, and the applications which
depend upon modules modified in the update don't "get
it" so far as the new updated modules.
Thanks for your reply.
I've tried repairing permissions, I've now downloaded and installed QuickTime 7.1.2 and have tried forcing prebinding all to no avail!
There is still no sound in iMovie but iTunes etc. work ok.
If there's no solution forthcoming I'll be forced to reinstall Tiger to enable me to go back to QuickTime 7.0.4

Audio from iMovie 10.1 to garageband??

wanting to edit some sound from iMovie, so Just wondering if anyone knows how to get audio from iMovie 10.1 in to garage band at all? i have found numerous tips and videos from the previous versions but not 10.1?? can anyone help

Curious also is that in the new Garageband 10.0.1, the media broswer only shows the "old" iMovie library (from 9.0.9), you can though browse all movies in the movie folder, (so except the new iMovie 10 Library)
So either you share your movie with iTunes (that you can look up in the mediabrowser of GB) or export as an mp4 movie tot your movies folder, which you can approach as well via the media browser in GB 10.0.1
Ben

Transferring Movies from IMove

Publishing from IMovie to ITunes for use in the IPad?
What is the best size to use when publishing to ITunes -Medium or Large?

What is the best size to use when publishing to ITunes -Medium or Large?
Large for HD source content and Medium for SD source content unless you want to create your own custom dimension files from HD content.

No sound in iMovie 5

After upgrading to Quicktime 7.1.1 I've lost sound in iMovie 5.
Previously recorded movies have lost their sound together with any new recordings I make. Volume levels are still shown in the timeline but no sound is produced. All other applications appear to be working normally (iTunes, GarageBand, Audacity etc.).
To restore sound in iMovie I've had to reinstall Tiger together with updates to the current OS 10.4.7 and then install Quicktime 7.0.4.
Strangely this problem doesn't exist on my wifes eMac running OS 10.4.7 and the Quicktime 7.1.1 upgrade. Sound in iMovie 5 works perfectly.
(Quicktime Pro is also installed on my G4 and my wife's eMac)
G4 MDD Mac OS X (10.4.6) Now operating OSX(10.4.7), 1GB Ram
G4 MDD Mac OS X (10.4.6) Now operating OSX(10.4.7), 1GB Ram
G4 MDD Mac OS X (10.4.6) Now operating OSX(10.4.7), 1GB Ram

Hey there. You might have been bitten by the
installer permissions problem. Open Disk Utility and
repair your permissions. There is also a QuickTime
7.1.2 installer available.
Finally, try forcing prebinding to run. Open a
Terminal window, and type the following:
sudo update_prebinding -root / -force
This is useful for repairing system slow-downs, but I
have also found that this will fix situations in
which I have done updates, and the applications which
depend upon modules modified in the update don't "get
it" so far as the new updated modules.
Thanks for your reply.
I've tried repairing permissions, I've now downloaded and installed QuickTime 7.1.2 and have tried forcing prebinding all to no avail!
There is still no sound in iMovie but iTunes etc. work ok.
If there's no solution forthcoming I'll be forced to reinstall Tiger to enable me to go back to QuickTime 7.0.4

How so I get sound from you tube back ? computer sound works

all of a sudden I can't get sound from videos or music on you tube, but I have sound from computer on ITunes ??? How do I get computer to play sound from you tube again?

Turn the youtube volume up?

FCP7 Taking an mp3 file (sound effect from imovie library to compressor then import to FCP7

I am clicking and dragging from iMovie sound effects into FCP7 in it's original format mp3 then I am sending it to compressor and using a 48-16 codec
to compress it then I am going back to FCP7 and trying to import it but it does not show up on either my internal drive or external drive. Am I missing something? I have done this all before. Thanks.

Hi
I'm much more lazy - as I have one way to handle Audio and it always works for my projects.
• I convert all to .aiff 48kHz 16-bit - or use Audio-CDs .aiff 44.1kHz
Everything I convert to this - by use of the free program - Audacity
or from iTunes - by burning out on an Audio CD (still .aiff - no .mp3 or ect)
These files works greatly in all my Movie/DVD projects.
Yours Bengt W

IMovie 08 loses sound when transferred to iTunes

Sorry of this is a dumb question! I've made a movie in 08 and shared it with the media bar and iTunes. I've got the same problem as other people concerning purchased music not playing on the published movie. However I'm also getting jingles from iMovie's own resource pane refusing to play. Everything plays fine on preview but I get silence during some jingles - not all - and purchased music. As I synch my movies to Apple tv this makes Movie 08 pretty useless.
Any ideas why this might be happening or do I wait for Apple to fix the software it's sellign as an upgrade! Sorry to sound annoyed but thisis frustrating!

Appreciate the response...our situations are slightly different. I assumed from the thread that you were dealing with video that had to be converted. I am dealing with video purchased straight from iTunes and shouldn't need anything but uploading to the iPod.
My iPod plays the video from start to finish flawlessly yet silently. b stopped short of having me restore the iPod opting instead to have me upgrade the software (which didn't solve the issue).
I didn't know if b had any other ideas short of restoring the unit. It's been several days since I heard anything that is the reason for the new thread.

No sound after importing mpeg from imovie

Hello, i'm new to IMovie and i have the problem that all my video files made with my photocamera loose the sound when i import them into Imovie. the FAQ's tell me it is because they are in mpef-muxed structure. Can anybody help me with the solution on HOW to get my movies with sound into Imovie ???

I have exactly the same problem and took your advice, downloading MPEG stream clip. But it is not clear to me how to do this.
Previously I dragged the MPEG clips from iPhoto ( which played fine in QT with sound) into my iMovie and there was no sound ( as the OP describes).
So if you could spell out the exact procedure, I would be most grateful

Sounds from iMovie to iTunes

Similar Messages

Maybe you are looking for