Sounds garbled and didn't drop iPad.

A lot of talking apps are on my iPad for demonstration and teaching purposes. Suddenly the sounds are all garbled and that makes hearing what is being said very difficult. Didn't drop it. Have been caressing this puppy! Any ideas? The only other issue with it was Voiceover wouldn't close once. Despite tapping it once to select it and then double tapping to activate it and having it close--it would open again--ON ITS OWN!--requiring a request to Siri to close Voieceover. Any ideas? Thank you in advance!

That did it! I did a "hard reset" and it's back to normal!!!
Thank you so much!

Similar Messages

  • Music sounds garbled and echo

    The music from the IPOD function of my Iphone sounds very garbled and distorted. Everything else appears to work fine. I have tried different headphones. This would have appeared to have happened since the latest update. This is an original iphone 8gig.

    I found out after a trip to my apple store that my phone had picked up some moisture. Once they had determined that, they would not take it any further. There is an indicator in the bottom of your headphone jack. If it is red then you have had moisture get into your phone.
    I would have thought they would have had an option for repair since the rest of the phone works great. They do not even have a refurbed phone at reduced pricing. basically I could buy one at the same price as the new one. Not a good way to serve your customers Apple!

  • Flash files with audio sound garbled or high pitched

    I have finally clarified the sound problem I reported in this
    forum.
    See below.
    TechSmith
    Camtasia Studio Support
    Flash files with audio sound garbled or high pitched
    Question
    Flash files played in the the newest version of the Flash
    Player sound garbled or have a high-pitched "chipmunk" sound to
    them.
    Answer
    http://techsmith.custhelp.com/cgi-bin/techsmith.cfg/php/enduser/std_adp.php?p_faqid=1250&p _created=1197056770&p_sid=BZo7CNSi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmc F9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTImcF9wcm9kcz0wJnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9 zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PUZsYXNoIFBsYXllcg**& p_li=&p_topview=1
    Flash files with audio sound garbled or high pitched
    Question
    Flash files played in the the newest version of the Flash
    Player sound garbled or have a high-pitched "chipmunk" sound to
    them.
    Answer
    The latest release of the Flash Player (v9.0.115.0 released
    on 12/03/07)) causes audio to sound garbled and/or high pitched
    like a chipmunk. Our development team is looking into this issue
    and working to find a fix.
    To avoid this problem, you can roll back your Flash Player to
    a previous release. If you have problems installing an older
    release of the Flash Player please review this article and contact
    Adobe for further support.
    At this time, the problem is limited only to SWF files
    produced with the MP3 audio codec. As a workaround, you can produce
    your SWF files with the PCM audio codec or use the FLV format
    instead of SWF.
    Adobe Flash Player Support
    Reinstalling an earlier version of Adobe Flash Player
    Contact Adobe:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402435&sliceId=1
    Safe versions security restrictions when installing Flash
    Player
    Issue
    If you previously installed a later version of Flash Player
    for Internet Explorer, you may be prevented from installing an
    earlier version. For example, if you installed Flash Player
    9.0.47.0 and attempted to install version 9.0.45.0 the installation
    would fail.
    Reason
    This issue is due to registry key settings applied by the
    Flash Player security model. The restriction is to prevent users
    from downgrading Flash Player minor versions. The minor version of
    Flash Player is the third set of numbers in the version name. For
    example, the minor version for Flash Player 9.0.47.0 would be 47.
    If Flash Player 9.0.47.0 was installed and you attempted to install
    9.0.45.0 (minor version 45), the installation would fail.
    Solution
    To resolve this, download the uninstaller for Flash Player
    from "How to uninstall the Adobe Flash Player plug-in and ActiveX
    control" (TechNote tn_14157).
    Select Start.
    Select Run.
    Type cmd
    In the command window, type the following:
    uninstall_flash_player.exe /clean
    This will remove all entries in the system registry and
    resolve this issue.
    Note: The uninstall_flash_player.exe file must be saved to
    the same directory that the command window is in, for example C:\.
    Additional Information
    If you are still having trouble installing Flash Player,
    please see "Troubleshooting Adobe Flash Player installation for
    Windows" (TechNote tn_19166).
    TechNote Details
    Last Update: 08-16-2007
    ID: kb402435
    OS: Windows Vista
    Windows XP
    Browser: Internet Explorer
    Permanent Link:
    http://www.adobe.com/go/kb402435
    Products Affected: Flash Player

    Hi,
    I doubt it's Safari that's changing the settings:
    Why does this happen?
    Some third-party audio applications may change your computer's audio output setting. In fact, if you use the third-party application again after applying the above solution, the issue might occur again.
    No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
    iMac G5 20" 2GB RAM, Soundsticks, Netgear 814 --->   Mac OS X (10.4.3)  

  • IPhones and iPods ALL drop wireless at same time-but not iPad??

    In my family, we have mutliple Apple devices online at the same time.
    iPhone 3s
    iPhone 4s
    two iPods
    iPad 2
    I also have two work laptops and a personal laptop, all running Windows 7. Plus, I also have an XBOX 360 on a Linksys wireless gaming router (older one...can't run WPA2 security, only WPA)
    They are connected to internet with Netgear WNR2000 wireless router, running WPA security, up to 54 GB/s (I believe on 2.4 GHz).
    HERE'S MY ISSUE:
    About once every day or two, all of my iPhones and iPods will drop off of the wireless network - at the SAME TIME.  However, every other device in my house is running perfectly smoothly on the network.  Including the iPad 2, which never has any network issues.   The "fix" is, going over to the router and cycling it off and on again.  But that is not a real fix. 
    The dropping is kind of random, sometimes in the morning, sometimes in the evening.  But usually after several hours after a recycle.
    I have tried all kinds of router channels,1 -11, I have tried WEP and both kinds of WPA security (AES and TKIP).  I cannot do WPA2 because of my older Linksys access point.
    The problem started happening when I added security to the router.  But I do not want to have the router without security any longer, so removing it is not an option.
    Does anyone have any idea why all of my iPhones and iPods would drop the wireless network at the exact same time, however, my iPad 2 and every other device in my household NEVER drops?
    I have already tried renaming the network, and that doesn't help, and I have tried moving the channel around - no better.  I am trying reserved IP addressing for my i-devices...but am not optimistic. (I read about trying this somewhere...)
    Please help!  If someone could at least help explain what is common between my iPhones and iPods but not common with the iPad it might help me figure this out.

    @wjosten
    I agree that network interference can cause problems. I have surveyed the other close networks and tried multiple channels, same result.
    But if it were bad channels, I don't know how that would explain why only the same set of iDevices would all be thrown off network at same time (and it's always the same ones),  while my other devices all work fine. 
    My router is only single channel, so everything is on the 2.4ghz band.

  • I have an Ipad 2 and didn't update the 4.3.3, now when I try to update to 6 it keeps on coming up with an error.

    I have an Ipad 2 and didn't update the 4.3.3, now when I try to update to 6 it keeps on coming up with an error. do i need 5 first? and if I do how do I update to 5?

    What, Exactly, is the Error Message...

  • I purchased an ipad from a dealer on ebay with a 9 month warranty still on it.  I set it up and decided to return it and buy the new Ipad instead. How can I be sure I didn't activate the warranty, or deactivate if it has been activated?

    I purchased an ipad from a dealer on ebay with a 9 month warranty still on it.  I set it up and decided to return it and buy the new Ipad instead. How can I be sure I didn't activate the warranty, or deactivate if it has been activated?

    Sorry, I can't tell what it is you're trying to ask. What does the warranty have to do with your intention to return the iPad (to whomever) and get another one?
    There's no way to deactivate a warranty.
    The warranty transfers with the machine, has nothing to do with the owner.
    Look around in the Support pages, you can figure out a way to type in your serial number and see what your current warranty status is.

  • When plugging in my headset, the sound continues to play on the ipad and not on the heeadset. Why?

    When plugging in my headset in my iPad, the sound continues to play on the ipad and does not switch to the heeadset. Why? I did not have this problem before.

    If you have used earphones in the past then I assume that you realize it takes a very firm push to insert the headphones into the opening - correct?

  • Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

    Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

    I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
    Did you manage to find a solution? Help please if possible. Regards Az

  • I purchased a book at Amazon and clicked kindlecloud because I didn't see ipad option.  How do I get my purchase to my kindle app?

    I purchased a book on Amazon and clicked it onto kindlecloud because I didn't see an ipad option.  How do I get my book to my kindle app?

    Log into Amazon.com again. Click or tap on Your Account at the top and sign in. Then go down to Digital Content and click or tap on Manage Your Kindle under the Digital Management heading. That will take you to a screen where all of your Purchased Kindle books are listed. Tap on the Actions Button on the right next to the book that you want to download and select - Deliver to my - and then select - Your iPad Name -  in that pop up window. The book will be delivered to the Kindle app.
    You have to allow the book to sync to the app. It can a minute or so. Tap on Device in the Kindle app and the book should be there.

  • My iPod Touch stopped working somehow. It's not dead, and I didn't drop it. It just stopped working. What do I do?

    It won't turn on! Why, I don't know. It just won't turn on. It's not dead, that's the weird part. And I didn't drop it.

    Rebooting your iDevice
    Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.

  • HT204370 I had purchased a movie on my ipad while on a business trip and now I'm home on my IMac and wish to watch the movie I didn't finish on my iPad.  How can I continue to watch on my IMac if I purchased and started on my iPad ?

    I had purchased a movie on my ipad while on a business trip and now I'm home on my IMac and wish to watch the movie I didn't finish on my iPad.  How can I continue to watch on my IMac if I purchased and started on my iPad ?

    Open itunes, connect ipad, click File>Devices>Transfer Purchases

  • How to enable sound and rotation on my iPad?

    How to I get sound and rotation on my iPad.  I had it and now I have either sound or rotation.  Please help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Re sound:
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    Re rotate:
    iPhone, iPad or iPod screen will not rotate, fix
    http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/
     Cheers, Tom

  • I sold my ipad 2 and didn't take out my apple id. how can i log off the ipad with out having it in hand?

    I sold my ipad 2 and didn't take out my apple id. how can i log off the ipad with out having it in hand?

    You can't. But the buyer more than likely restored it because he/she could not use your Apple ID.

  • My sound won't work on my ipad even though the sound is up and the button on the side is on volume? Any ideas ipad 2

    My sound won't work on my ipad even though the sound is up and the button at the side is on volume? Any ideas. For ipad 2

    They will replace it with a refurb of like kind if the problem is deemed to be hardware related and not caused by misue. They will probably try restoring the device and troubleshoot it on their own before they replace it for you .... And I'm talking about an Apple Store here.
    You should probably try this next.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

  • Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =(  P.S. may be I wrote with some mistakes, so I apologyze for it

    hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
    so what should I do? please help me =( 
    P.S. may be I wrote with some mistakes, so I apologyze for it

    Hello darkhanfromaktobe,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Have a nice day,
    Mario

Maybe you are looking for

  • One Drive on Mac Mini Server not indexing - no spotlight or finder results

    I have two drives on my Mac mini server. No RAID, etc. They are factory config 500G each. The "main" drive has all the applications, desktop, etc on it and indexes fine, I can search or spotlight with no problem. Anything on the other disk works fine

  • Selective Bursting-Use of Bursting control file

    Hi, I need some infromation on selective bursting of XMl data. I am bursting the Oracle EBS invoice print program based on whether the preference is email or printer. I could handle this easily in the bursting control file. The xml was filtered based

  • Receiving Group Text : How do i see who else is in the distribution list???

    Receiving Group Text : How do i see who else is in the distribution list??? other phones seem to have this, how can i see this?  Post relates to: Pre p100eww (Sprint)

  • All projects and images on Aperture have disappeared.

    My Aperture application froze so I had to force quit it, and restart the computer. When I reopened it every project and image for the past two years has dissapeared. I attempted to restore the library and application using time machine, but each one

  • Create user-only directory

    Hi guys, I've got an administrator account on my mini, and my colleague has got a standard (non-admin) account. He would like to create a directory on the external HD that only he could access, i.e. no access for me, the admin. But we dont know how t