Sounds Great in Logic 7.2 Express, but not so much when bounced to AIFF

When I play my track in Logic it sounds great, but when I bounce it and play the .aiff it doesn't, it sounds less dynamic, not as rich.
Can someone give me some advice/tips about bouncing? What are the best settings for the best sound quality? The track well end up on a cd.
Thanks!
You can listen to the work in progress here (levels are not finished and this is an mp3):
http://www.djgecko.com/mp3/05yesterdaystomorrow.mp3
Dual G5 2.0 Mac OS X (10.4.7)

Hey B,
The track seems fine dynamic wise, (apart from some audio clicks here and there). Are you using any audio interface? If yes, that can be the cause, after bounce you probably earing from the mac output.
If you're recording at 24 bit (44.1KHz), use dither at bounce, to have a nice 16 bit.
You can also use the mastering plug-ins on the Output 1-2, on channel strip, click on the inserts arrow>logic express>mastering and choose>final master pop or dance to see wich one you like best. This loads a bounch of plug-ins at the master that will give a nice push to your mix. Watach the levels if it's too hot, bring down the compressor gain.
Best regards,
Jorge

Similar Messages

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

Pulsing static sound is audible thru speakers or earphones, but not USB output.

Compaq Presario CQ532oF Windows 7 64 bit
Pulsing static sound is audible thru speakers or earphones, but not USB output. Makes listening to talk or music unbearable. This just started a few days ago. Volume control affects the volume. Does not matter if audio program is playing or not playing. Pulses are about 2 seconds duration - sounds like a phonograph record at the end of play where the tone arm didn't pick up.
Is this likely an amplifier problem? Is the amp on the sound card?

Hi vc329,
Doesn't sound like encouraging news, though it is odd that the sound came back for a short while at least. If you still haven't rebooted the PC since putting it to sleep and loosing the sound, then I would suggested going ahead and rebooting or even doing a full hard reset (power down, remove the AC adapter, remove the battery, hold down the power button for 20 seconds or so, then reconnect the AC power and Battery and boot up) to see if the sound can be recovered again.
If the sound still doesn't work, Check Device Manager to see if the sound driver still looks OK, make sure you are using the latest driver again (it looks like the latest driver is 6.10.6381.0), another option might also be to try the older driver that is still available from the site, or try recovering the original driver shipped on the PC. The steps to do these things are covered in the document listed below, in Step 6 (Restoring the Audio Driver), Step 7 (Updating the Audio Driver), and Step 8 (Checking Device Manager):
No Sound from the Speakers (Windows 7)
If none of that seems to help, I'd recommend testing the hardware using Step 9 in that document.
If the online warranty check sees you as out of warranty, you may still be OK if you have the original proof of purchase (receipt) from wherever you purchased the PC, but you may have to provide it when calling HP for service if the sound can't be fixed. If you are close to the end of warranty I'd recommend calling customer care for your area (I assume you are still in Asia) and validating the warranty with them as soon as possible just to make sure.
Although I am an HP Employee, I am speaking for myself and not for HP.

Graphics convert but not text even when ocr is disabled

graphics convert but not text even when ocr is disabled

Hmmm... I seem to have found the plist file that is doing it. I was looking at /Library/Application\ Support/Apple/Remote\ Desktop/ before... looks like /Library/Preferences/com.apple.ARDAgent.plist is the culprit.
This plist is a binary, so I had to use plutil to convert to xml in order to make it human readable. I wonder if I can just hack this file up a bit and re-deploy it to each machine. Or I wonder if it would re-build if I simply remove it from each client. I will need to test to find out, seeing as though the task servers are listed in it, probably not a good idea to remove it all the way.

I want to buy poker chips from my iTunes account, but not do this when i want to buy that say"please contact iTunes support ti complete this transaction"for what is this i dunt understand this.plz solv this probleams.

Hi,i'm Mizanur Rahman,i want to buy poker chips from my iTunes account, but not do this when i want to buy that say "please contact iTunes support ti complete this transaction" for what is this i dunt understand this.plz solv this probleams.but i parseas software from this account.so why not parseas poker chips? i have lote of blance in my account.so plz plz solve this provleams.
<Personal Information Edited by Host>

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums (I've asked the hosts to remove your email address from your post).
You can contact iTunes support here and ask why you are getting the message and how to resolve it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT1725 Hi,i'm Mizanur Rahman,i want to buy poker chips from my iTunes account, but not do this when i want to buy that say "please contact iTunes support ti complete this transaction" for what is this i dunt understand this.plz solv this probleams

Hi,i'm Mizanur Rahman,i want to buy poker chips from my iTunes account, but not do this when i want to buy that say "please contact iTunes support ti complete this transaction" for what is this i dunt understand this.plz solv this probleams.but i parseas software from this account.so why not parseas poker chips? i have lote of blance in my account.so plz plz solve this provleams.
<Personal Information Edited by Host>
iPhone 4, iOS 5.1.1

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided. We are all just fellow users here and so have no idea about the cause of the issue nor any ability to resolve it for you.
Regards.

My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

My macbook turns off randomly but not completely because when I tap the touchpad it goes to the password screen and I am back to it in seconds. It's really annoying. HELP!!!

1. Non volatile random access memory (NVRAM) is where the computer stores user's settings, like time and date, speaker volume, energy saver settings etc.
2. Reseting NVRAM has no impact on anything on your hard drive, or anything else on the computer.
See this note from Apple: http://support.apple.com/kb/ht1379

Changing a patch or sound on ext synth crashes GB 08 but not GB 3 pros help

Here we go again, **** it!
too good to be true!
I havent tried this on logic express but maybe you guyz can figure this one out......
had a great system that never crashed!
i have a korg X50 audio outs that go into audio in of QUAD G5.
If i pick a real instrument tk and hit monitor on and play it records from my synth. If i change the patch no matter how
just changing the patch crashes GB vs 4.0!!!!!!!!!!!!!!!!!!
before i go crazy is there something im not doing here?
i had a wonderful working usable external KORG adding all the voices i wanted to GB3 but now no longer.
i do not use an audio interface. is this the problem now

i do not use an audio interface. is this the problem now
No, just sounds like a GB problem. Don't use GB, I think my version is v2.00 so I can't be much help. You mifgt want to check over on the GB forum and see if others are having the same problem.
I can think of a couple of things to try.
Does GB'08 crash if you're on a MIDI track when you change patches?
If no, a workaround might be to select a MIDI track before changing patches then back to a real instrument track.
If it still crashes it's possible you have a midi loop, does GB'08 have a MIDI Thru enable/Disable?
good luck-
Pancenter-

Sound through hdmi to my tv works but not when watching video online like 4OD

the sound through hdmi to my tv works with music and videos I have downloaded, but not when watching video online like 4OD and youtube.
How can I get it to work?

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

USB printer recognized by A.Express but not by new A. Extreme (gigabit)

My Canon IP4300 was automatically recognized and worked without any problems with an old Airport Express. However, with my new AEBS (gigabit ports), the printer is no longer recognized, I don't see it in the printers tab (says none).
Surprisingly, when a Windows PC connects to the new AEBS with the printer connected to the AEBS USB port (but not recognized in the Airport Utility), the windows PC finds the printer and can connect to it. So physically, the connection can be made, thus it has to be a problem with the Airport utility?
Quite strange that AEBS printer 'plug and play' works better with Windows PC than with Apple computers. Other people experiencing the same problem?

Nevermind. The Epson R220 works fine on the AEBS. Wrong USB cable was plugged into the AEBS.

HT204053 I can't log on to icloud from my Windows 7 PC. It says it's a valid Apple ID, but not icloud. When I try to log in from my original ID, it says invalid.

I can't sync my iphone 4 with icloud on my PC. I downloaded the icloud software and it says my ID is a valid Apple ID, but not an icloud ID - this is right after I've set it up as one. Help!

Are you trying to login to an account you already made (on an iPhone or similar) or create a new iCloud account?

I have an apple id for my itunes and want my wife to be able to access it on her ipad but not sure how when her id is different?

I have an apple id for my itunes on my computer not a mac......and want my wife to be able to access the music I purchase on her ipad....but not sure how she can do it when her ipad has her own apple id and it says she would have to use my apple id.....any suggestions?

You can use one account with iTunes on your Mac, and different account(s) with the Mac App Store (for buying/downloads apps or OS updates for your Mac), iCloud (System Preferences > iCloud) and Messages (Messages > Preferences, or command-comma)

Error 0x80007114 "Outlook Express could not be started" when trying to run Migration Assitant.

Trying to run Migration Assistant on a PC (Windows XP). Error message "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Contact Microsoft support for further assistance. (0x80007114)" Then the Migration Assistant shows a box stating that Outlook Express must be stopped before running the assistant.
I have enough memory. The disk is not full. Outlook Express runs just fine on my PC. And it was not runing at the time.
Apple Support (two tries) and my Apple store have essentially said this is a Microsoft problem. Of course, Microsoft says it is an Apple program failing so it is an Apple problem.
MS info about the error indicates that it prevents OE from starting. Than is not my situation at all. The fix is draconian (as many are) and could risk my OE so I have not gone there - yet. Hopefully there is another way.
Does anyone have any experience on how to (easily) solve this dilemma. I am also trying on the MS side.
This is my first MAC. I was convinced to go Apple by several folks who touted the excellent support. It was purchased in July 2012 and has been a boat anchor since. Support??
Thanks for any info you can provide.

So I had this as well.
I went to the file tab and went to export. From there I picked 720p and it worked. It may be different for you depending on the resolution of the video. hopefully it works for you too!

Organized iPod playlists into folders in iTunes, but not showing up when iPod is disconnected. Please help!

I organized my iPod touch playlists into folders in iTunes on my computer (while my iPod was connected to my computer) but when I disconnect and go to use the iPod separately, the playlists that I organized do not show up in the folders they were put into. They're still all jumbled up, rather than in the playlist folders. The folders show up on my iPod, but some are empty and some have a few but not all of the correct playlists in them. How can I fix this?

Freespirit777 wrote:
PLease note that you cannot organise ipod playlists or folders while it is NOT connected to iTunes, as you simply can't see them.
Yes you can.
If I'm not mistaken, this thread was started prior to the release of iTunes 11. iTunes 11 does "hide" Playlists and Playlist Folders, until you turn the Sidebar back on, using CTRL+S. Also, the top menu bar is useful, and that can be turned on with CTRL+B. However, that aside, nothing has changed regarding Playlists, You can (and have always been able to) create, alter and manage Playlists without having an iPod connected to iTunes. You then allow a Sync to synchronise those Playlists to the iPod.
So use CTRL+B and CTRL+S and make sure you have the top menu and the sidebar showing, like so;
Notice the Playlist Folder, that I've named "Test Folder". Inside it is a Smart Playlist ("Rating 1 star") and two regular Playlists ("Dummy list, do not use" & "Test list"). To create new ones of any of these items, click on the + symbol at the bottom of the iTunes Window (I've ringed it). You then see this:
So that sorts out creating and managing them in your iTunes Library.
Freespirit777 wrote:
It looks like ipod doesn't have a folder function which is unhelpful and user unfriendly.
That's not correct. At least, not as far as the Playlist Folders we have been discussing.
Once the Playlists are Synced to the iPod, looking in the Playlists section on my iPod Touch, shows this;
Notice the "Playlist Folder" (named Test Folder) on the list. Delving into that shows the three Playlists that we saw in iTunes. Notice the name of the Playlist Folder at the top, and the three Playlists in it, listed below (in alphabetical order):
One thing that may be of further use to you; while arranging my iPod to get the screenshots, I found that it took two attempts to get the Playlists fully Synced with my iPod (I use "Sync selected playlists" with it). So if your first Sync doesn't put everything onto your iPod, try a second Sync.

Machines avail on Bonjour but not Local Network - when on same subnet?

I have a simple system running ARD 3.2 on a machine running OS X 10.5.2, controlling a small number of machines running 10.5.2 or 10.4.11, all on the same sub-net.
Two of the computers - both 20" Intel iMacs (2.0GHz CoreDuo) with 10.5.2 installed have an odd problem - most (but not all) of the time they show up in the ARD computers list as being available for Screen Sharing Only - and so things like copying files to the machine fail. Their entries have the 'light blue' icon next to them which appears to indicate this state.
When in this mode they initially fail to show up when I do a scan of the local network. They should - as they are running off the same Airport hub as the ARD controller. However, if I change the scan to look for Bonjour connected computers they show up. If I then go back to scanning the local network they show up there too. But still nothing more than the light blue icon and screen sharing only as an option.
I've checked the settings of both machines - both have ARD enabled in sharing, both have the firewall set to allow all incoming connections. Other machines connected to the same sub-net show up and can be used without problem. All the machines are running ARD client 3.2.1
Anyone got any ideas what might be going on?
Grateful for any advice / suggestions.
Message was edited by: Gavin Lawrie

Almost same setting here, same troubles.
If I restart them via Screen Sharing via the Restart Button on the Login Window, they sometimes show up correctly. But this is way too annoying.

Sounds Great in Logic 7.2 Express, but not so much when bounced to AIFF

Similar Messages

Maybe you are looking for