Sounds NOT working! Please help!
I have a ON/OFF switch to sound the music. When the site
loads the music plays automatically and if clicked it turns off the
music and it works OK, but if I imported a new music file with a
different file name and delete the one that worked. I set the ID to
"mySound" just like the first one that worked. The site loads and
no sounds at all. Why?
This code below is to turn off the sound. I have another
similar code, but to turn on the sound.
Hi pystyke,
Welcome to Apple Support Communities.
You may find these links helpful with troubleshooting the audio issue you're experiencing:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy
Similar Messages
-
Sound not working. please help!
hello, I just got this new iMac that i got used and the sound on the computer does not seem to be working, I have tried doing what the computer tells me and going into System Prefrences and selecting the sound option, but the sound seems to have been permanantly disabled and shows that there are no output or input devices available, when clearly the monitor has speakers. whats more, is that the volume icon does not show up in the menu bar even when I select that I want it in the menu bar. I would greatly appreciate if someone would get back to me on this as soon as possible and tell me what the **** is going on because I dont know what to do and I want my sound. So Please Help!
Do you hear the startup "bong" sound when powering up the iMac? If you do, that means the speakers work and there is probably something messed up in software or settings.
First, try resetting PRAM. This is the procedure.
http://support.apple.com/kb/HT1379
Sound volume setting is one of the things stored in PRAM. If you hear the startup sound after holding down those four keys at startup, then your speakers are probably working now. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
Maybe you are looking for
-
Printing a report directly to the printer on the client machine
Hi All, I am migrating reports from 6i to 10g, all these reports are called from menu and some from forms. There are some reports which are directly sent to the printer for printing. My question is when we run those reports that are sent directly to
-
Trouble using OSX 10.4.7 & .8 on iMac 24" (Core 2 Duo 2.16GHz)
If I choose Russian Interface and try to print from almost any application to network printer connected via AppleTalk or IP or as Windows printer, Application crashes after pressing button Print ("Напечатать...") Here is the dump of TextEdit Date/Tim
-
Want to change the text of a coloumn dynamically in module pool program
Hi to all experts, I need to change the text in a table control( of a column)of a module pool program dynamically ....depending on the company cod e.
-
Help - Manual Ban Statement with no transactions
Hi, I have to post a manual bank statement transaction FF67, however there are no transactions for the particular statement I wish to enter. The Auditors would prefer to see a bank statement in the system, even if it is empty. How can I achieve this?
-
What is load balancer in fms cluster and how to configure it and testing fms clustering
Hey guys, I am new to fms and clustering the fms server in origin-edge mode.But i am confused actually what is load balancer and how to configure it . After configuring , how to test and confirm that fms clustering is working.Is there any