Sounds still plays through speaker with headphones plugged in

I've recently been having problems with my sounds. I would plug headphones into one of headphone jacks on my HP dv6tse laptop and i would hear sounds through my headphones as well as my speakers. So basically I'm getting sounds from my headphones as well as my speakers at the same time when only my headphones should be getting the sound. Is this a hardware problem or some kind of settings problem? Please help!

same issue, i have a hp pavilion dv6 6169sl
no answers?

Similar Messages

  • Sound not playing through speaker or headphones

    Hi all
    My iPhone 4 has developed a problem - I get no sound at all, not through the speakers, or by plugging in the headphones.
    No app sounds, no key sounds, no phone call sounds - nothing!
    I've tried cleaning all the fluff out of the headphone jack and the dock connector, I've also tried a full restore.
    One other odd thing that happens is that if I open the Music app, it has now started cycling forward through the track listing by itself
    Any ideas?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting the phone, but it can cure some glitches.
    If this does not work, try to set it up as new device without using the latest backup, to rule out a software issue.
    If still no sound, you might have a hardware problem, and the phone needs to be serviced.
    iPhone - Contact Support - Apple Support

  • TS2771 I can only hear sounds from my ipod touch with headphones plugged in.

    I am only able to hear any sounds/music from my iTouch with the headphones plugged in to it.  I have the change with buttons selected to "on".  Am I missing something else?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I have no sound in my computer, only with headphones, i tried the software update but it still doesn't work, and i have a red light on in my computer.

    I have no sound in my computer, only with headphones, i tried the software update but it still doesn't work, and i have a red light on in my computer. How to resolve that  ?

    Plug and unlpug the headphone jack with some intention to get the mechanical switch to flip.
    You can google for more intrusive methods. 
    ex. Read through all the many approachs: http://www.ifixit.com/Answers/View/8797/Audio+jack+problem,+no+speaker+sound,+re d+light

  • I get sound on my ipod touch with headphones in but no sound through....

    I get sound on my ipod touch with headphones in but no sound through the built in speaker on my ipod touch. I got it in December so it's a new model.

    Welcome to the discussions,
    can you see the speaker icon and the changing of the volume bar if you press your volume buttons?
    Try this with the headphones plugged in and then unplug them and see if the volume for the speaker is displayed.
    Is your volume limit set to max?
    Set a volume limit for music and videos: Choose Music > Volume Limit and drag the slider to adjust the maximum volume
    copied from http://manuals.info.apple.com/enUS/iPod_touch_3.1_UserGuide.pdf , page 123

  • Sound playing through speakers and Headphones at the same time...

    Hi everyone, I have a Toshiba Satellite A215 S5849. It is only about 6 months old. Now whenever I plug my headphones into the headphone jack, sound keeps playing through the speakers and in the headphones at the same time. Also the speakers do always have a crackling sound like they are blown. I have been trying to fix it for awhile now but no luck. Any help would be appreciated.

    Hello again, sorry that the driver did NOT resolve the issue. What I suggest we try is the Support Assistant. This will do a scan on your entire computer and if the computer does have a issue it will find it and show you how to resolve the issue. Please click on the following link to get to the download.  http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
    Thanks again.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Running iOS 7 voicemails will only play through speaker option

    Received a sensitive voicemail. Tried playing it back through the earpiece on the device. The OS indicated that the audio was playing but no sound was coming out of the earpiece on the device. I proceeded to select the speaker option then hit play in the audio played through the speakers. I then on selected the speaker option plug in my headphones hit play and the audio came in through my headphones. I've already tried restarting my device I am running an iPhone 5 with iOS 7 the latest version. Any solutions or recommendations?

    I have the problem with iphone 4s ios 7.0.4 voicemail play through speaker only. after follow steps below I got it back from play on and off on speaker.
    The Apple Store advised Settings>General>Reset>Reset Network Settings
    Hope it helps if someone has the same problem.  My other iphone 4 works fine without reset the network.

  • When using earphones, sound still comes through speakers

    When I plug in my earphones, the sound still comes through the speaker

    Hi @jasbreezy ,
    I saw your post regarding the sound coming out of both the speakers and headphones. I will be happy to help you with that. Try setting just the headphones as the default audio device instead of both. Do the headphones you use have a microphone by any chance?
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Getting sound to play through computer during import/selecting to import

    HI,
    Complete newbie question as I've never done video before...
    I plug the camera (Sony DCR- HC48) through Firewire into iMovie '08.
    The camera is recognised, the import window opens and I can play the video, choose the bit I want and import it as a clip - cool! No problems there.
    The problem is, when I am selecting the video to import the sound plays through the camera and not through the Mac. Ideally I'd like it to play sound through the Mac so I can use headphones while I select video to import. So my question is...
    Is there no way to get the sound to play through the Mac as I am selecting the video to import?
    Thanks for any help.
    Pat

    So what would be the "standard" way of working? Would you import the whole DV tape onto the hard drive and then cut it down to size on there or bring in bits from the camera and use the camera's audio to select the chunks you want?

  • Rear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)

    DRear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)T Hey there,
    I just installed the newest modded driver from [url="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790">here[/url] and now I have the problem that when using DDL/DTS Connect (yes I have it activated!): the rear left channel gets output on my front left speaker, and the rear right goes to front right. My externaldecoder is correctly identifying the output stream as DD/DTS and the front speaker and subwoofer works fine. Also when using my Xbox 360 the sounds correctly get to the rear speakers, so this is likely not a problem of my decoder.
    Anyone had a similar problem to this? Any idea why this happens?
    My system:
    Windows 7 x64
    Intel Core2Quad Q6600
    4 GB RAM
    nVidia Geforce 9800 GTX+

    H I noticed this doesn't just happen with DDL/DTS Connect. The same behaviour happens when I connect my headphones to the plugs on the back of my computer. The rear plugs don't output anything, while the front plugs have "double" output.
    I tried all kinds of different drivers, always removing the previous ones and restarting before trying a new one. Right now I'm with the official 2.8.003 X-Fi driver.
    Please, somebody help!

  • No speaker or headphone plugged in issue

    I was recently upgrading my hp g6 2312ax laptop from windows 8 to windows 8.1 , unfortunately i failed to upgrade  my laptop , story not ends here during this process i unknowingly uninstall the sound driver and now facing another problem
    'No speaker or headphone plugged in' error ' no audio device is installed issue i observe in my laptop which iam unable to resolve, i have almost tried every solution available on internet but failed to bring back sound to my laptop, please someone help me 
    Windows 8 Single Language 64-bit 
    Product number: D5F89PA#ACJ
    Serial number: [Personal Information Removed]

    Hi there  @rsimpossible 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are no longer getting sound on your notebook.
    As a start here is the audio driver for your notebook for both Windows 8 and 8.1.
    IDT High-Definition (HD) Audio Driver
    After installing the driver, then if you are still having trouble try the following:
    No Sound from the Speakers (Windows 8)
    Resolving headphones and headset problems (Windows 8)
    From Microsoft's support website:
    Automatically diagnose and fix Windows audio playback problems
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • My itunes loses the sound when playing through TV/receiver

    My itunes loses the sound when playing through TV/receiver.  It is my 2nd Apple TV,  I have a Mac and PC and I have used 2 different receivers.  Any help?  If I start the music through Apple TV is doesnt skip but then I cant have it playing through computer at the same time.  It amazes me how these littles things arent fixed yet.

    I have almost the exact same problem, except that mine is without the iTouch. My itunes is working perfectly - uploading music from CD's, searching for music, syncing with my iPod classic. However when i ask it to play any music it will say that it is playing yet not only will no sound come out but the timer bar will not move either. it is the same with music in the itunes store and happens regardless of what else is happening on my laptop.
    i know my sound works fine with all other programs, and i read on another forum that 'repairing' itunes through the control panel fixes it, however this is not the case.
    Any suggestions would be greatly appreciated.

  • Unloading swf but the swf sound still play

    after unloading swf
    the sound of swf still play ??
    how i can stop the swf completely?

    if u mean using
    SoundMixer.stopAll();
    before the loading swf code
    i try that
    and still playing
    thats the code of scene 1
    stop();
    import flash.events.Event;
              SoundMixer.stopAll();
    var scene1s:Loader = new Loader ();
    scene1s.load(new URLRequest("scene1.swf"));
    addChild(scene1s);
    addChild(entery_bt);
    entery_bt.addEventListener(MouseEvent.CLICK, ToMainEntery);
    function ToMainEntery(event:MouseEvent):void
              scene1s.unloadAndStop();
              MovieClip(this.root).gotoAndPlay(1, "Scene 2");
    so he goes to scene 2 with the sound still playing ?

  • I have an apple certified refurbished iPod touch 3rd generatio.  When playing the music with headphones, the music moves from song to song.  When it is on a docking station, it repeats the song.  Any ideas why or how to fix it?

    I have an apple certified refurbished iPod touch 3rd generatio.  When playing the music with headphones, the music moves from song to song.  When it is on a docking station, it repeats the song.  Any ideas why or how to fix it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

Maybe you are looking for

  • HT1296 how can i get the music that is already in my iPhone into my new itunes on my pc?

    i need a bit of help. my computer crashed causing me to get a brand new one. i have now downloaded the latest iTunes. i have music on my iPhone4s which i want to put in my new iTunes on my computer. can't seem to get it done. any one know what to do?

  • Has anyone upgraded to iDVD 5 with Combo Drive & external disc burner

    I have an iMac G5 with a combo drive. I have purchased a Lacie d2 drive to burn slide shows from iDVD. The Mac recognizes the Lacie on the firewire input but says under system utilities "Disc burning: not supported". I would upgrade to iDVD 5 if this

  • Why can't I see presenter information

    In edit presenter information I can do just that : [IMG]http://i6.tinypic.com/2u6feps.png[/IMG] However when the slide show runs all I see is the slides themselves no presenter into. Problem? or am I doing something wrong? [IMG]http://i6.tinypic.com/

  • Any way to open/retrieve encrypted Camera Roll photos

    I had to restore my iphone 3GS.....is there a way to open/retrieve the Camera Roll photos that were on this phone? I regularly sync'd this phone, with "encrypted backup" enabled.  I have since purchased a new iPhone4 and want to restore the 3GS encry

  • Inspector Window MISSING

    Motion 3 upgrade has stopped displaying the Inspector Window. I have re-installed and updated the software to 3.02 3 times now, no improvement. Any suggestions? Thanks...Keith Dadey