Sounds stops mid playback

both my Itunes and my 4GB Nano(when using the dock for playback), have this problem. During playback, i will get a loud click then the sound will stop, and program/device still shows the song as playing. i have found that i can get the sound back by ether pausing and unpausing the song several times, or by adjusting the sound. the problem doesn't so up with any consistence, it will happen to any song at any give time. the only predictable thing about it is that it will happen. i know that trying to debug an inconsistent problem is nay impossible, but if anybody has heard of this happening and know of a fix i would love to hear it.

i have stopped having this problem

Similar Messages

  • Mainstage 2.1 - EXS sound stop when playback loop start

    Hi,
    i use with MacBookPro 4(Go) and audio Kontrol (Native instrument)
    i have some concert with exs24 sound violin , when i play a note and start a loop in Playback after, the violin sound stop!
    do you have an issu?
    Thanks

    Sure, a quick reply: create a multi audio track song in Logic using markers. Bounce this to AIFF files - one for each instrument say.
    Using the MS multi track mixer template, drag the bounced files into playback instances and set the synch option to "wait for marker"
    Start MS playback then use the jump back/forth between markers buttons to do that. MS should continue playing untill it reaches the end of the section, then jump. It does but the results are unpredictable. Mostly I get white noise. This used to work under 2.1
    This is very well documented in another post and YT vid which I will try to find and append later today.
    Here it is: http://discussions.apple.com/thread.jspa?threadID=2372092&tstart=75
    Message was edited by: randallp

  • Sound stops during playback

    Running the latest version of CS6 (current on all updates) on a Mac Mini i7 2.3GHz with 16GB RAM running OS X 10.8.2.
    Whenever CPU usage starts to get a little heavy, sound will go silent at random times during playback of timeline in the program monitor.  Meters go to zero when sound goes out and go active when sound returns.  Video playback is fine and there are no dropped frames.  This also was happening on my previous machine, a 2008 Mac Pro.  Started happening with CS6 and never happened in CS5.5.
    All my source footage is h264 from a Canon 5D.  Sequence was created by doing the 'create sequence from clip' command.  Program monitor resolution is set at 1/4.  Played with setting audio hardware buffersizes to different values but with no change in behavior.

    I'm having the same problem on an editing workstation with CS6. The audio will stop playing after 4-5 seconds, video plays fine. The timeline has been rendered. If I hit the stop/pause key, (spacebar), and hit it again, it will play for another 4-5 seconds before the audio drops out. Sometimes only one audio track will stop playing.
    Video is 720P, two audio tracks, three video tracks.  System is win 7-64 with an intel I7 extreme CPU, 12 GB RAM (9GB dedicated to Premiere, performance mode)
    Any suggestions?

  • Sound Blaster PCI64 MIDI playback er

    Hi!
    When I start my computer a window opens, the window says: "The Creative Sound Blaster PCI64 driver cannot load MIDI waveset. MIDI playback has been disabled."
    Does anyone knows what I have to do to make this window dissapear and enable MIDI playback again?

    aarthas,
    This Knowledgebase article SID930 should be able to help you.
    Jason

  • TS1470 Downloaded songs stop mid-song in iTunes music library and on iPod.

    I received the 'secure network connection could not be established' error message several times during a recent audio download.  I was able to eventually complete all of the downloads by going to the 'available downloads' area.  However, when I played back the downloaded songs, several of them ended mid-song although the complete songs appear to have successfully downloaded judging by the 'Time' (minutes) count for each song.  (Interestingly enough, the majority of the songs that stopped mid-song during playback were marked as having high popularity in the iTunes store.)
    I've had this issue with previous downloads too.  I've been charged for and have paid for these songs, but didn't receive the full product in some cases.  It's very frustrating that I'm not able to enjoy these songs in their entirety.
    Have other folks had this issue?  What is the resolution?

    Something may have gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem.
    If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
    tt2

  • Sound stops during automation recording.

    Alright here's a video example of what I'm talking about.
    When I'm doing a "Touch" Automation on one midi track, while recording a touch track the midi sound stops as soon as I move the slider.
    The automation still records, it's just that the sound stops during automation.
    In the video notice that as soon as i move the Volume Automation slider the midi playing
    stops. Why? I need to be able to monitor this while I'm adjusting the automation.
    Appreciate anyone's suggestions.
    It's Logic Express 8.0.2 by the way.
    http://s177.photobucket.com/albums/w238/perrycomo/?action=view&current=Example1. mp4

    NoSound problem with headphones? With speaker?
    If only with headphones have you tried another pair of headphones?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • While watching rented movie it stops during playback, how do i fix it?

    I rented a long movie and it continues to stop during playback, how do I fix that?

    Hi dedesgirl,
    Welcome to Apple Support Communities.
    It sounds like there is an issue playing songs in iTunes. Does the playback issue only occur with specific tracks and were they purchased from the iTunes Store? Take a look at the article linked below and try the suggestions which will resolve most iTunes and QuickTime Player playback issues.
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    I hope this helps.
    -Jason

  • Internal soundcard - Logic 8 - cracking sound/stop/reboot/go

    I'm having issues with the built in sound card of my Macbook Pro C2D 2.2. It happens more often lately. In Logic with just a few midi tracks and one simple loop sometimes I hear a strange cracking sound coming mainly from the left side of my MBP and the sound stops. Logic keeps on playing but the internal sound just overloads. It's not that overload message. I can reboot the soundcard by making changes in the logic preferences, I click apply and I hear that cracking sound again - the built in sound works for a couple of minutes and then goes nuts again. Restarting OS X doesn't help. It is frustrating. I don't use the internal sound a lot with Logic, but I want to be ale to do so. If anyone can help on this one, I'd really appreciate it. Thanks.

    I forgot to mention that changing the buffer size doesn't help...

  • Can't init midi playback

    I have troubles with midi initialisation. I use SB Live and ALSA drivers. mp3/wav/ogg playing so good, but I can't load midibank into SB with awesfx-0.5.d (and awesfx-0.4.4 too) from http://www.alsa-project.org/~iwai/awedrv.html
    May be exist another way for midi bank load?
    [vlad@vixen ~]$ lspci | grep Creative
    01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
    01:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07
    [vlad@vixen ~]$ cat /etc/modprobe.conf | grep -v '^#'
    alias snd-card-0 snd-emu10k1
    alias sound-slot-0 snd-emu10k1
    root@vixen vlad]# sfxload /mnt/storage/Soft/multimedia/midi_banks/8RealGS20.SF2
    /dev/sequencer: No such device
    !!! Why? But devices are presents:
    [root@vixen vlad]# ls -l /dev/sequencer*
    lrwxrwxrwx 1 root root 15 2006-10-22 13:57 /dev/sequencer -> sound/sequencer
    lrwxrwxrwx 1 root root 16 2006-10-22 13:57 /dev/sequencer2 -> sound/sequencer2
    [root@vixen vlad]# ls -l /dev/sound/sequencer*
    crw-rw---- 1 root audio 14, 1 2006-10-22 13:57 /dev/sound/sequencer
    crw-rw---- 1 root audio 14, 8 2006-10-22 13:57 /dev/sound/sequencer2
    [vlad@vixen ~]$ lsmod | grep snd
    snd_seq_oss 31744 0
    snd_seq_midi_event 6784 1 snd_seq_oss
    snd_seq 48240 4 snd_seq_oss,snd_seq_midi_event
    snd_pcm_oss 39424 0
    snd_mixer_oss 14720 1 snd_pcm_oss
    snd_emu10k1 114592 4
    snd_rawmidi 19968 1 snd_emu10k1
    snd_ac97_codec 92580 1 snd_emu10k1
    snd_ac97_bus 2560 1 snd_ac97_codec
    snd_pcm 68868 5 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
    snd_seq_device 7308 4 snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
    snd_timer 19204 3 snd_seq,snd_emu10k1,snd_pcm
    snd_page_alloc 8200 2 snd_emu10k1,snd_pcm
    snd_util_mem 4096 1 snd_emu10k1
    snd_hwdep 7556 1 snd_emu10k1
    snd 45444 17 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
    soundcore 7776 1 snd
    Please help me configure properly midi.
    Thanks!

    My soundcard does not support MIDI being an onboard card. But I've used timidity to along with alsa's MIDI routing capabilities to play MIDI files. Timidity acts like a MIDI playback engine by providing patch banks. First, load the snd_virmidi ALSA module. Then, execute timidity in daemon mode as so
    timidity -iA
    Then, use aconnect to determine the MIDI virtual connection port.
    aconnect -o
    client 20: 'Virtual Raw MIDI 1-0' [type=kernel]
    0 'VirMIDI 1-0 '
    client 21: 'Virtual Raw MIDI 1-1' [type=kernel]
    0 'VirMIDI 1-1 '
    client 22: 'Virtual Raw MIDI 1-2' [type=kernel]
    0 'VirMIDI 1-2 '
    client 23: 'Virtual Raw MIDI 1-3' [type=kernel]
    0 'VirMIDI 1-3 '
    [emmanuel@~/]$ aconnect -o
    client 20: 'Virtual Raw MIDI 1-0' [type=kernel]
    0 'VirMIDI 1-0 '
    client 21: 'Virtual Raw MIDI 1-1' [type=kernel]
    0 'VirMIDI 1-1 '
    client 22: 'Virtual Raw MIDI 1-2' [type=kernel]
    0 'VirMIDI 1-2 '
    client 23: 'Virtual Raw MIDI 1-3' [type=kernel]
    0 'VirMIDI 1-3 '
    client 128: 'TiMidity' [type=user]
    0 'TiMidity port 0 '
    1 'TiMidity port 1 '
    2 'TiMidity port 2 '
    3 'TiMidity port 3 '
    In my case, the output port will be 128:0
    Now, you need to connect a virtual MIDI IN port to this out port. So use aconnect to view IN ports like so.
    aconnect -i
    client 0: 'System' [type=kernel]
    0 'Timer '
    1 'Announce '
    client 20: 'Virtual Raw MIDI 1-0' [type=kernel]
    0 'VirMIDI 1-0 '
    client 21: 'Virtual Raw MIDI 1-1' [type=kernel]
    0 'VirMIDI 1-1 '
    client 22: 'Virtual Raw MIDI 1-2' [type=kernel]
    0 'VirMIDI 1-2 '
    client 23: 'Virtual Raw MIDI 1-3' [type=kernel]
    0 'VirMIDI 1-3 '
    I'm going to use port 20:0. So to make the connection, run...
    aconnect 20:0 128:0
    You will notice timidity will recognize the connection. Now, you can use a MIDI capable client to play MIDI files using timidity as the sound engine. One such application is seq24.
    If you just want to play a MIDI file, all you need is
    timidity myfile.mid

  • The sound stopped working on Mac Book Pro OS X?

    The sound stopped working. Firefox installed updates and since, the sound is disactivated. I went to preference, and the silence box is checked, but it doesn't allow me to uncheck it. The sound peripheric is not recognised it seems. What can I do?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so uncheck it.
        Option click the speaker icon, if present and select Internal Speakers.
    6. Launch iTunes and play a song. Adjust the volume there.
    Best.

  • AUDIGY 2 ZS: Sound stops working when loading ga

    Hello, I recently upgraded my CPU/mobo and reformatted. Ever since then I've been having a few problems with my sound. I'm using the Audigy 2 ZS. I have the latest drivers off the website. Yes, I have disabled the onboard audio in the BIOS and there are no drivers for it installed in Windows. And yes, I have the latest version of DirectX and SP2 and everything else from Windows Update.
    - I'll play Mp3's in Winamp - using both the DirectSound and waveOut output methods - and the music will play fine. Windows system sounds and AIM sounds play find with this too. When I launch any game however, the sound shuts off.
    For example, I'll load World of Warcraft, and the music will stop playing, when I exit the game the music resumes. Even stranger I noticed that when I WoW is running, the speaker configuration randomly gets changed from headphones to stereo speakers. Changing it back via Creative Audio Console caused the audio console to hang. Trying to change speaker configuration via Windows did nothing. and yes, I checked to ensure my soundcard was selected as the proper playback device, the volume was up, not muted, etc...
    When I run Neverwinter Nights 2, the sound will shut off for the into logo screens and the intro scene. My Mp3 music from Winamp WILL resume playing at the main menu, however, the volume becomes noticeably less. Exitting the game restores the proper volume level.
    Even stranger - if I run NW2 followed by Warcraft, my music will play during WoW, but at a lowered volume similar to Neverwinter nights 2. If I then quit WoW and restart WoW, I am back to no music. Strangely it seems just to get the low-volume music to play during WoW, I have to have previously run Neverwinter Nights 2.
    To summarize:
    - Music and Windows sounds stop altogether while running World of Warcraft
    - Music and Windows sounds play at much lesser volume during neveriwnter nights 2, and not at all during intro
    - sound works in warcraft, but at a lower volume, ONLY if I'd run neverwinter just before runnign warcraft
    - similar buggy low volume / no music at all problems in Medieval 2 Total War
    - one time I had my music become all distored and start skipping/ slowing down when I was trying to reset the speaker configuration back to Headphones when it was magically changed to stereo speakers.
    I highly doubt it's a problem with the games - I've been playing these games and using Winamp and my Audigy 2 ZS for quite a while now, and never had a problem with any of my games screwing around with my WIndows sound levels or cutting it off altogether. I'll keep updating as I install more softwareMessage Edited by xagent on 0-09-20070:9 AM

    Could it have anything to do with the fact that the drivers I downlaoded were off the Creative website?
    I'm currently on WInter break for a couple more weeks, and left my Audigy 2 ZS CDs back at college. But I don't see why the latest Audigy 2 drivers from the Creative website should be faulty.
    oh, and I'm running Win XP Pro

  • Sound stop playing during video playing on ipad 1 with ios 5.1.1

    after updating my ipad 1 to ios 5.11 the sound on my ipad sometimes stops suddenly. it happens during video playback, music listening or just text typing on keyboard.
    i ve tried all the advices seen on communities and no one worked for me (restore the system, change the lock screen button configuration, clean the headphone input, test with apple headphones...)
    please help me to find a solution and thank you for your help.
    another information : when sound stop playing, sometimes when i lock the ipad, a strange noise comes from the speakers like a larsen.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Sound stop working also video play such as on news. Help

    My sound stopped working and playback of a video(such as in a news item) stopped working also.  Please help me solve the problem.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • My rental stopped mid-movie, help. this has happened multiple times to me before too.

    My rental stopped mid-movie, Help. This has happened multiple times to me before too. I demand I get a refund.

    Hey preachit,
    It sounds like we are running into issues with the iTunes software connecting to your device. If possible, lets try plugging your iPhone 5 in with a different cable. Also, try plugging it in to a different USB port on your computer:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    We may need to isolate the issue down to the iPhone or the current installation of iTunes. If the above steps have not resolved your issue, remove and reinstall iTunes:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Thanks,
    Matt M.

  • I solved MIDI playback with Flash

    The URL where you can check it out is
    http://www.reginafierro.com
    (it's an art gallery with some tasteful nudity)
    The MIDI playback starts on page 2 (after you click 'enter'
    on page 1)
    and can be stopped / restarted by click on the Music On /
    Music Off
    links in Flash.
    It works on our Macs in every browser. I'll test it on PCs
    next, it
    should be okay. If you need a detailed explanation how I did
    it, drop
    me a note here, and I'll spell out the steps.

    karol wrote:Try this way: https://bbs.archlinux.org/viewtopic.php … 34#p899434
    If you can't click on that video, try this one: http://www.w3schools.com/flash/tryit.as … yhtml_ball and reboot.
    I freaking love you, the first one seemed to work! Thank you!
    Posting it here aswell:
    Anikom15 wrote:1. http://www.youtube.com/swf_test.html
    2. right click on player
    3. click settings
    4. choose left-most tab
    5. uncheck "Enable Hardware Acceleration"
    Don't know how to mark a thread Solved so I just wrote it in the topic.
    Last edited by raggerv8 (2011-06-07 19:08:45)

Maybe you are looking for