Soundtrack audio present in QT, absent in everything else

I have created a movie soundtrack project in GarageBand with just two tracks: the movie sound and a Jingle track containing a stock Apple loop. Exporting to disk then playing the movie in Quicktime works fine, but playing it in iTunes or uploading to YouTube does not include that Jingle track. The movie goes silent during the 23 second portion.
I've tried ducking and manually manipulating the movie soundtrack to be silent and nothing works. I'm no novice at this stuff but am I genuinely stumped.
Ideas?

I encoded using Adobe Encore 1.5, then created a standard VIDEO_TS file that I burned to a Philips DVD-R disc using a third party program called "DVD Blaster". I was having some difficulties getting the one within Nero and Encore to work, so I used a free trial of said program. I'm by no means an audio aficionado, but I believe Encore is indicating that it encodes the audio as Dolby Digital. My burner burns as 16x.
I played the DVD through my computer, and it works fine. I played it through an XBOX 360 and it didn't work. I just now tried it in my Toshiba upconvert player and it worked! Interesting. The Toshiba connects through my TV via HDMI, then a standard red-white composite audio cable connects it to my receiver. The 360 connects directly to the receiver via an optical cable. Currently, I only have the center, right, and left channels connected. There are no rear speakers.
Let me know if you need anything else. I appreciate the help.

Similar Messages

  • Audio present in exported AVI form, dissappears with export to DVD (HELP!)

    Hi, I have this incredibly strange audio problem that I can't figure out.
    Basically, my audio works fine in Premiere, and in whatever form it is exported in. As soon as that file is uploaded to either youtube or burned to a disc in dvd video form, I almost completely lose my sound. There is a little bit of audio present, but mostly in the form of a very low buzz. If I crank the sound to the maximum, I can just barely hear dialogue, but there is almost no way to distinguish what is being said.
    The following can help narrow things down:
    PC Specs:
    Vista 64 bit
    Intel Quadcore 2.4ghz
    4gb RAM
    8800GTS 512mb
    Onboard Audio
    I recently wrapped up on a short film in which we shot on a Sony HDR-FX1 camera. We used an audio-technica shotgun mic and a separate wired mic. The wired mic works fine when put on a dvd, but the audio picked up by the shotgun mic does not. The onboard microphone works as well. In one particular instance, we used a different Panasonic camera in combination with the shotgun mic. THIS specific audio works fine on the DVD. Remember that all of the audio plays back perfectly in Premiere, Encore, and in any exported video/audio format.
    Things I've tried, with no avail:
    - Turning dB up to an absurd amount
    - Exporting solely audio, then brining it back onto the timeline
    - Exporting in various video formats, i.e flash, quicktime, etc.
    - Exporting with various audio setups (though not everything)
    What is going on here? I have to have this footage prepped by Thursday, and this audio problem is posing a serious problem. If you need ANY more information, let me know. I'd appreciate any and all help. Thank you!

    I encoded using Adobe Encore 1.5, then created a standard VIDEO_TS file that I burned to a Philips DVD-R disc using a third party program called "DVD Blaster". I was having some difficulties getting the one within Nero and Encore to work, so I used a free trial of said program. I'm by no means an audio aficionado, but I believe Encore is indicating that it encodes the audio as Dolby Digital. My burner burns as 16x.
    I played the DVD through my computer, and it works fine. I played it through an XBOX 360 and it didn't work. I just now tried it in my Toshiba upconvert player and it worked! Interesting. The Toshiba connects through my TV via HDMI, then a standard red-white composite audio cable connects it to my receiver. The 360 connects directly to the receiver via an optical cable. Currently, I only have the center, right, and left channels connected. There are no rear speakers.
    Let me know if you need anything else. I appreciate the help.

  • My incoming calls have weak audio.Everything else is fine anyone have an answer?

    My iphone 4s has suddenly begun to have weak incoming call audio. Everything else works fine. I have reset it from factory settings and reloaded as advised by Apple Tech support..This didn't help. Anyone have a solution?

    I have had it for a while..this just started last night...Everything else works perfectly..I can put it on speakerphone and hear...but it is barely audible otherwise!

  • I just updated to windows 10 and I have no audio, everything else works fine

    i have no Audio, sounds or volume afte the update/upgrade to Windows 10. This is NOT the case yesterday when I did not have Windows 10 updated/upgraded into my Sony Vaio Laptop. Everything else works fine, it's taking a usb logitech mouse among other things. My Audio jack will not function so earbuds will not do the trick. I have found a old PS3 usb headseat seems to work, following that logic a usb speaker set would do the same. If you have a HD Cable you can link your laptop to a HD TV and use the TV's speakers. What can I do to fix my audio problem?

     
    Hi judedudemude! 
    Welcome to Sony Comnuntiy!
    I am glad to hear that you were able to resolve the issue by following jshanholtz suggestion (Thank you by the way). I'll save this on my bookmark and will refer to this thread if there will be post with the same issue. 
    Thank you guys, 
    Vincent 
     

  • HT201272 My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem?

    My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem? I have already authorised my new computer and I am currently downloading my purchased music and videos however the books (audiobooks) are not showing for download.
    Hope someone can help!

    "My audio books are not showing up in purchase history,"
    That is correct.  You cannot redownload audiobooks.
    " is anyone having the same problem?"
    Everyone and it is not a problem.  Audiobooks simply are not available for redownload.

  • I have one random Apple ID that appears only when I go to itunes or App Store.  For everything else I have my Apple ID and password all set.  Can I get rid of this thing?

    This is a Question:  I have one random Apple ID that comes up only when I'm trying to access Apps or iTunes.  I have another Apple ID with a password that works just fine for everything else.  I do not have a password for this random id.  How can I get rid of it?  I can't perform updates is the big issue.

    Jonathan:This seems to make a lot of sense.  My only follow up question is:  will I have any trouble getting iTunes and
    Apps back?
    Will apple charge me?  I really can't remember clearly, but it seems to me that iTunes and Apps were present on the
    iPad2 that was given to me as a gift, but I could be mistaken.
    If I am all clear for getting those two stores back with an easy selection, then I will use your solution.
    Have a great season, my friend- this was driving me nuts!  Thank you so much!
    Dianep

  • Why do videos look so bad in QuickTime X and look good in everything else?

    Why do videos look so bad in QuickTime X and look good in everything else?
    Any way around this or is this something apple needs to fix?

    OK, videos!
    What kind of videos?
    Have you tried using Quicktime Player 7?
    Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded.
    http://support.apple.com/kb/dl923
    Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
    Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".

  • Flash sound not working - everything else is

    I'd like to start out by mentioning that I realize there has probably been posts about this in the past, I know I've googled one. But the information didn't help, so I thought I'd start a thread about in hope that someone may be able to help.
    This is off a new instilation of Arch Linux 64 bit, and as the Subject says I can't get sound from any flash video, etc from a webpage. Everything else works, amarok, videos off the drive, games, etc. I've tried reinstalling flash through pacman, didn't work. I tried installing flashsupport through pacman, didn't work. I tried the beta drivers of flash, didn't work.
    Now, what I tried last night did work, so it seemed. I blacklisted oss, rebooted. I had then working flash, and I could play music from amarok at the same time. That was all I was able to test at that time. Only thing that I found odd was when I did that, I had lost the little tune that plays when you enter and exit KDE. It also notified me that one of my Audio devices had stopped working. Now, this morning, I logged in. Same no little tune, same notification from KDE that a device isn't working, actually two times it notified me. I then tried amarok. No sound. I tried flash, no sound. I went into the system settings, fooled around with the devices. The device that works was at the top of the list where it should be. I tested the sound, it worked there. I closed out of it, was trying sound again, nothing.  I went back to the multimedia in system settings, now the sound won't work when I hit test. I look in the Kinfocenter under my sound, and my sound driver is ALSA like it should be, but under sections like MIDI device, and Mixers, it's coplaining about them not being enabled in config. Which I know before I blacklisted OSS, they where.
    So, I did the only thing I could think of, and un-blacklist OSS, reboot. I come back in, and it's still complaining about a sound device not working, no intro sound. I go back to system setting -> multimedia, make sure my preferred device is at the top, test the sound. Ok working. I test amarok, working. Video, working. I log off, and back in. I got the intro sound, there was no notification that a sound device isn't working. Checked kinfocenter, everything seems to be there, my mixer is back and configured, etc. Everything is back to normal, except sound in flash. So I'm right back where I started, minus my confusion as to why when I un-blacklisted, and rebooted it was still giving me issues at first.
    I've also read up about dmix, but it says that with ALSA 1.0.9rc2 and higher, it doesn't need to be enabled, since it already is automatically. Considering I have ALSA 1.0.21, I don't think that's the issue.
    So, does anyone have any suggestions as to what I can try, or do to fix this? Any help would be greatly appreciated, thanks.

    Just wanted to thankyou for the link. From using the fuser -v /dev/snd/* /dev/dsp* command, I was able to do a couple days of research, the command told me flash was trying to use /dev/dsp, so I had to reinstall the alsa-oss package, that seemed to fix it for a while. But the next day it was back, I blacklisted oss again, and then the key here that I think really may have fixed it is that apparently under my modconfig file I had to make it load my soundcard first, it wasn't even in there. ALSA was trying to use my onboard soundcard, and my pci sound card. Alsamixer was using my onboard, but most everything else was using my normal card. I'm thinking that when flash was playing, it somehow decided to use my onboard instead. That's my thoughts anyways.
    Last edited by Meister (2010-05-13 18:27:36)

  • This an IPOD I bought used.  Everything else works fine.  It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine.  Any ideas?

    This an IPOD I bought used.  Everything else works fine.  It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects.  Any ideas?

    Then my last suggestion is to Reset it, while connected to the BMW Audio.
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • My Mac laptop screen is black but everything else is on

    My Mac laptop screen is black but everything else is on.

    Hey Cdronet14,
    Thanks for the question. I understand you are experiencing issues with your iPhone 5. I see that you have already attempted a reset of the device. To isolate the issue further and determine if it is hardware related, the next step would be to backup and restore your device as new:
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    If the issue is still present, you may want to contact Apple Support.
    Thanks,
    Matt M.

  • Phone freezes, everything else ok

    ios 5.01 on iphone 4 (June 2011). The phone keypad is not present, or sometimes shows up 15-20 seconds after hitting the phone icon, othertimes keypad is there but frozen in that the keys don't work. Have tried to reset and that clears it for awhile, but problem returns. Everything else works fine, e.g., text, email, apps. The phone was fine before 5.01. I know I can restore to factory, but I really don't want to set-up the phone (icloud, mail, apps, etc) again. I am just wondering if anybody else has seen such an issue. Generally speaking, it seems that the ios releases are getting more buggy.

    I had the same problem. Make calls and when there is no dialing tone, I end it but then it freezes and the same goes with the sms. I can't receive calls and sms too. Reset it and it goes away but then it comes back again. This 5.01 is not good and now I am stuck with it.
    If I were to get a hard reset done, will it help?

  • My computer is "not authorized" to download TV show to iPod, but is in fact authorized and syncs everything else.

    I haven't purchased a TV show for a couple of iTunes updates and did so this morning. The episode plays on my Mac, but will noy sync to my iPod Touch. iTunes tells me the computer is not authorized. But the computer is authorized and syncs everything else.
    Anybody have suggestions on how to fix this?
    Thanks,
    Mattadolphus

    More users have reported this problem, but there does not seem to be an universal solution.
    Browse or search these discussions to find some hints.
    It works perfectly on my system (with iLife 5) and I have no problems with purchased music.
    As a workaround you could burn your purchased music on an Audio CD (not MP3 or data) and re-import them.
    Those re-imported tracks will play in QT and iDVD.
    M

  • Can't get photos onto iPod. Everything else is OK.

    When I try syncing photos from iTunes to my iPod I get the "The disk could not be read from or written to." error message. Everything else gets synced (music, video, podcasts).
    I tried reseting my iPod, rebooting Windows, the software was just installed when I got the iPod so it should be fresh.
    Any ideas?

    Hello . I have the exact same problem . After playing with reset - reinstall and speaking to apple directly for over 2hrs. I have found that there is no simple solution . It must be an Xp problem . Customer support suggested that the problem may be remedied if I create a new Xp user and reinstall to that user . It did not work . However - if you want to get pictures on your ipod and you can get videos on your ipod then do as follows - use microsoft movie maker - free with Xp - to make a slideshow of your photos . Then convert the .avi slideshow into ipod format . Put the video slideshow on your ipod and enjoy . You can pause during the slideshow to show people individual pictures . Just a note I can now no longer get podcasts on my 30g video ipod . Starting to wish I kept my hassle free , itunes free flash usb mp3 player .

  • HT1390 I've rented & downloaded a movie on my computer in itunes, but it does not show up on my Apple TV.  Everything else shows up on Apple TV, including my computer's movie library.  When I click on the movie in Apple TV it says I've already rented it.

    I've rented & downloaded a movie on my computer in itunes, but it does not show up on my Apple TV.  Everything else shows up on Apple TV, including my computer's movie library.  When I click on the movie in Apple TV it says I've already rented it and asks if I want to rent it again.  No, I just want to watch it.

    Unfortunately I have to if I download it on my computer.  I have rented itunes movies before directly using the Apple TV and it worked just fine and I could stay in the living room.  Without clicking that icon on my computer, there was no way to watch it.

Maybe you are looking for