Soundtrack -missing sound effects from the library

Hi everyone,
I have recently installed Soundtrack onto my computer ( I have FCE HD) and the content onto an external HD.
Unfortunately I have noticed that there seems to be a fairly large section of sound effects missing, including "weapons" and "explosions". The reason I know these are missing is because there are greyed-out buttons for them where there is other ones present such as "Sci-fi" and others.
Can anyone help me find where these are- or do i not get a full sound effect library with FCE?
I'd be grateful if anyone could help.
Cheers,
Dave..

Soundtrack Pro, that comes with FCP, is a different application, with more capabilities, than Soundtrack. Did you connect all your sounds up? If yes, if you selected the folder that contains them, then that's all you get. You can add more loops from sound libraries online. There are pre-built categories that the Acid loops format uses that will get assigned to the different sections as you add them.

Similar Messages

  • I'm trying to open sound effects from the recource page and there's no waveform

    I'm trying to open sound effects from the recource page and there's no waveform

    What version of Audition are you talking about?  Going from memory, there was a change to how things worked (starting at CS6 maybe?) from their being a "resource centre" to a "Download sound effects and more" link on the help menu.  Exactly where that leaves owners of earlier versions would, I think, be a question for Adobe, not a user forum (though there are some pretty clever people who visit here.

  • FCP7 Taking an mp3 file (sound effect from imovie library to compressor then import to FCP7

    I am clicking and dragging from iMovie sound effects into FCP7 in it's original format mp3 then I am sending it to compressor and using a 48-16 codec
    to compress it then I am going back to FCP7 and trying to import it but it does not show up on either my internal drive or external drive. Am I missing something? I have done this all before. Thanks.

    Hi
    I'm much more lazy - as I have one way to handle Audio and it always works for my projects.
    • I convert all to .aiff 48kHz 16-bit - or use Audio-CDs .aiff 44.1kHz
    Everything I convert to this - by use of the free program - Audacity
    or from iTunes - by burning out on an Audio CD (still .aiff - no .mp3 or ect)
    These files works greatly in all my Movie/DVD projects.
    Yours Bengt W

  • Loading a sound file from the library to play it in one frame

    I am new to actionscript. I have a flash file with several frames. In each frame I need to play a sound file.
    I've added all the sounds to the library and done all the necessary steps to export for actionscript.
    Here's my code to play the sound in one frame.
    var sound1:Sound = new Cal10101();
    sound1.play();
    This works great to play the sound. I am using buttons to move to the next frame. When I click the button to move to the next frame, I need the sound from frame 1 to stop and a new sound which would be Cal10102 to start playing.
    How do I stop the sound from frame 1 from playing when I go to the next frame?
    Thanks,
    Steve

    what you should do is use:
    var sound1:Sound = new Cal10101();
    var sound1SC:SoundChannel = sound1.play();
    and before you goto the next frame execute:
    sound1SC.stop();
    // but you'll probably find it easier to use:
    SoundMixer.stopAll();
    before going to the next frame

  • Sound Effects on the Fly

    Hi...just starting to podcast and I've looked up how to do this but I just can't seem to get the sounds assigned to the musical keyboard or onscreen keyboard.
    Does anyone have a great "how to" or example how I can assign sound effects to certain keyboard keys on my Mac to use them during my broadcast "on the fly"
    Thanks!

    For clarification...
    I am attempting to add a laugh track or other sound effect from the GB3 loop pane...to use on the fly as I record...to give my podcast a more professional radio feel.
    I follow these directions but can't get it to work:
    To add a new sound to the Sound Effects instrument:
    Select the track using the Sound Effects Software Instrument.
    Choose Window > Musical Typing to open the Musical Typing window.
    Drag the region or loop from the timeline or loop browser to the Musical Typing window, and release it over the key you want to use the sound.
    If you transpose a region before dragging it to the Musical Typing keyboard, it keeps the transposition in the Sound Effects instrument. It will also play faster (if transposed up) or slower (if transposed down), similar to transposing a sound in a sampler.
    When it says to "drag the region or loop from the timeline...does that mean I add it as a track and then move it? Can't figure this out...
    Thanks!

  • I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

  • ITunes 11.1.2 sound is distorted, from the library from the store, from my external DAC. Tried swapping USB ports, reloading songs in an uncompressed format, etc. Sound is awful. Thanks for any ideas.

    iTunes 11.1.2 sound is distorted on my iMac, from the library from the store, from my external DAC. Tried swapping USB ports, reloading songs in an uncompressed format, etc. Sound is awful. Thanks for any ideas.

    I have the same issue.  If I open up the Equalizer and select any setting (including the one that is already checkmarked), the sound corrects itself.  However, it goes right back to crappy when a new song comes on. 

  • I just downloaded an album and it says the 1st track was still processing at 100% i restarted itunes and now that track is missing from the library, any ideas?

    I just downloaded an album and it says the 1st track was still processing at 100% i restarted itunes and now that track is missing from the library, any ideas?

    Hey Hisheroisgonex,
    Thanks for the question, and welcome to Apple Support Communities.
    If the track is no longer in your iTunes Library, you can re-download using the information in this article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • 1. How do I delete everything from the library?; 2. How do I delete everything without effecting the albums on facebook?

    1. How do I delete everything from the library?; 2. How do I delete everything without effecting the albums on facebook?

    To delete everything from the iPhoto Library select all photos in the "Photos" view and press the "delete ⌫" key.
    You cannot delete your photos without effecting the Facebook albums, if you are syncing your iPhoto library albums to Facebook.  See Terence Devlin's post here:
    Re: deleting from iphoto but not from facebook
    The only way to delete photos from your iPhoto library without removing them from your Facebook albums would be to sign out of Facebook first by deleting the Facebook account from your iPhoto Preferences:
    From the iPhoto Help:
    Important:  If you delete photos and albums from iPhoto, they’re deleted from your Facebook page, along with any posted comments. You can’t undo this action. To delete photos and albums from iPhoto without deleting them from Facebook, first remove the Facebook account from iPhoto. Choose iPhoto > Preferences, and then click Accounts. Click to select the Facebook account (below the Accounts subhead on the left), and then click the Delete button in the lower-left corner of the Accounts pane.
    Regards
    Léonie

  • Menu Templates missing from the library

    I am a member of the new Creative cloud.  I have downloaded and installed the CS6 applications including Encore.  I went to use items from the "Library" only to find that there are none.  I have since discovered that these "Library" Sets and Items are found on the Media Disk when you buy a retail box set.  One of the training videos on Lynda.com suggests one can download these library items.
    Does anybody know where I can find the download page for them?

    Stanley,
    I wonder if the MOD's can do something to join all these Library Threads?
    I can see potential problems with such, but to have a half-dozen (or maybe more) such threads, with mostly the same responses, is a bit tough to follow.
    It would seem that new posters, with the same exact problems, would Reply to one of the existing threads, rather than start a new one, where they will only get links to all of the other threads.
    Just thinking here,
    Hunt

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Hi, just updated hubby's iPhone 4 and all of his music has disappeared from the iPhone and from the iTunes library! He does have music still stored on his iPod, but can't get it from the library on his iPod back to phone or itunes. technophobe help pls!

    and all of his music has disappeared from the iPhone and from the iTunes library! Luckily he does have music still stored on his iPod, but I can't get it from the library on his iPod back to the phone or to itunes.Please help, but technophobe so put it in simple english please!

    Sounds like the music you had on your phone was not the same music on his computer. The iPhone/iPod touch is not designed to be a storage device. When you sync with a computer that doesn't have your music, it deletes your music from your phone.
    Was this music you purchased from iTunes? if so, and you are in the US, tap on itunes app, tap updates, tap purchased and tap on the cloud icon to get each song back. If you're not int he us, get iOS5 update later this week and do the same.
    But you need to move your itunes library to his computer. Create a user account on his macbook pro for you. From your external drive backup, load your itunes library on it. Then sync as usual! (Don't tell me you don't have a backup for your computer!)

  • Why my Logic Studio 9 (upgrade) does not install Soundtrack Pro, sound effects etc..?

    I just bought Logic Studio 9 (latest I suppose) upgrade version. Now I figured out that it does not allow me to install for example Soundtrack Pro, Sound Effects etc... How can I install them?
    Logic Studio 8 was not installed prior to install because OS X Lion does not allow me to install logic studio 8.
    What should I do now? Complete uninstall OS X and only update to OS X Leopard?

    Hi
    You have either moved the Applications or re-named them. For the updaters to work the Apps must be named "Logic Pro" and "MainStage.
    CCT

  • Question about scrolling and Movie Clips Loaded from the Library

    I hope I am posting this in the right forum.
    Ok, I'm using actionscript 2.0, and I am trying to make a scrolling image gallery. I have a movie clip with three layers. the first contains a movie clip used as a scroll bar. The second is a mask used to hide the overflow content, and the third contains movie clip thumbnails. when I click one of the thumbnails, it loads a symbol containing a larger version of the picture over top of the thumbnails on the same layer. My problem is, the large image is added at the very top of the movie clip, even when it is scrolled out of sight. I want it to appear in sight, so the user doesn't have to scroll all the way back up to the top to see it. This is annoying and confusing. Is there a way to do this?
    Here is the code I used to create the scroll effect (there is actually a whole lot more to the code but it is very long, so I am not adding it now. I will if it is needed though) 
    (Oh, and there is no text involved in this. I just got this code off a tutorial and I haven't changed the variable names yet)
        var scrollUpper:Number = 58;
        var scrollLower:Number = 309;
        var textLower:Number = 60;
        var textUpper:Number = -179;
        var scrollRange:Number = scrollLower - scrollUpper;
        var textRange:Number = textLower - textUpper;
        var startY:Number = imagesHolder_mc.thumbs_mc._y;
        function scroll(){
           var moved:Number = imagesHolder_mc.scroller_mc._y - scrollUpper;
           var pctMoved:Number = moved/scrollRange;
           var textMove:Number = pctMoved*textRange;
           imagesHolder_mc.thumbs_mc._y = textLower - textMove;
        imagesHolder_mc.scroller_mc.onPress = function(){
           this.startDrag(false,this._x,scrollUpper,this._x,scrollLower);
           this.onMouseMove = scroll;
        imagesHolder_mc.scroller_mc.onRelease = scroller_mc.onReleaseOutside = function(){
           this.stopDrag();
           this.onMouseMove = null}

    Thanks for your reply. I'll try to explain it better. I have a long, vertically scrolling movie clip. This movie clip contains lots of thumbnails. When I click a thumbnail, the full sized image is loaded from the library and displayed within the same movie clip. when I click the full size movie clip, it disappears again, and I can click another thumbnail to display another full size image. So I'm not just adding more and more stuff to the gallery if that's what you were thinking. I'm just clicking thumbnails to display the full size image so I can look at it, closing it, and moving on.
    But the full sized image is fixed at the very top of the scrolling movie clip, so if I click a thumbnail at the very bottom, I have to scroll all the way back up to the top to see the full size image. I just want the full size image to appear on screen no matter how far down I have scrolled to click a thumbnail.
    I made my basic gallery useing this tutorial:
    http://flashexplained.com/actionscript/making-the-ultimate-dynamic-image-gallery-in-flash- 8/
    if you want to take a look at that, to get an idea of what I'm talking about.
    Now I'm just trying to add some scrolling functionality, which wasn't included, but I don't really understand actionscript well enough to do this easily on my own.
    Sorry for the long reply. I hope this is clearer.

  • Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

    When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for