Soundtrack pro (1.1) with edirol ua-25??

This box is a bit older but I'm hoping perhaps someone can help.
Has anyone figured out a way to make an Edirol UA-25 USB Audio Capture box work with Soundtrack Pro? It works perfectly with any other Mac audio capture program I try...for which I can't find many...I want to use Soundtrack!
Any suggestions?

Nevermind, I'm an idiot and can't figure out a way to delete the question.
I figured out that Soundtrack Pro will only show the input device if the sample rate matches that of the current document. And since the default was 48000 and my box was set to 44000, it didn't show up.
Maybe that will help someone else that is clueless.

Similar Messages

Getting Soundtrack Pro to record with M-Audio Firewire Solo?

I'm having trouble trying to record 'live' into Soundtrack Pro. I've got a mic into analog mixer into M-Audio Firewire Solo audio interface into ibook set up.
In STP, I can select firewire channels 1 to 2 (under "Recording" tab) for the input device but nothing is recording when I hit the record button. the mic>mixer bit is working fine. I'm quite certain the mixer>audio bit is working so I think its a problem with compatibility between the M-Audio Firewire Solo device and Soundtrack Pro software....although it shows up as an option in the select audio input/output settings in STP... I've also got the latest Tiger driver for the Firewire Solo device and the latest update for STP.
I CAN record from the in-built mic on the ibook so that bit works...
Currently, I've been recording individual tracks into Audacity then exporting them all as separate tracks into Soundtrack Pro for post production as AIFF files (drag and drop them into STP in the order I require). I'm doing this as a temporary measure until I can find out how to get M-Audio Firewire Solo talking to Soundtrack Pro.
Anyone got any ideas?

Well, I got it working with Soundtrack Pro and Audio Hijack Pro in the end. It seems that only the front side of M-Audio FireWire Solo recording interface actually seems to work and only the right channel (mono). Its a little bit annoying but it works...not sure why the back ones did not work (s/pdif, balanced and unbalanced phone jacks plugs), perhaps its something to do with the fact that the front has gain level knobs and the back doesn't....hmm...maybe not enough power to drive the back connectors?
Anyway, if any of you happen to use M-Audio FireWire audio interfaces (analog to digital converter) and you face a similar problem, then its probably going to be a similar thing...

Soundtrack pro audio files with software

Im missing sound audio files. When I follow along with the lessons in Lynda.com the teacher shows something like 5011 files for audio and I have 2500. I did it step by step as he show to reset everything and still it finds only 2500 of the audio files. Im missing the audio files that the lesson is loading up for the lesson. Anyone know why I am missing the files? Where can I get the rest of them? Im missing all the audio files that start with the lettter A under instruments and bass loop. I have 78 and the lesson shows 306 I think. Thanks in advance.

Make sure you are indexing all of your Apple Loops folders. Do a spotlight search on Apple loops, and sort by type, to see the folders.
My main Apple Loops folder is in Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro, but I also have others for GB (some dupes) and others I have purchased in other folders.
Click Setup... to see your directories, then the + to add a directory, or select a directory and click Index now to re-index it.
If all of that fails, I think all of the loop content is on the install disks, but I don't know a way to get it without completely reinstalling.
OH, BTW, you're using the same version of STP as the Lynda.com tutorial, yes?

Soundtrack Pro channel mapping with a new setup

Hello All,
Looking for a bit of guidance regarding editing / mixing for 5.1 in SoundTrack Pro and Adobe Audition.
I had been editing with both pieces of software and had a successful 5.1 set up. I could place audio in each speaker independently via the software, and it would playback properly in the software and upon export.
Recently I've switched my setup from an old Klipsch ProMedia GMX D-5.1 (that was connected directly to the editing machine via optical), to a Denon 1610 receiver and Energy speaker surround setup (again, connected directly to the editing machine via optical).
The problem I'm encountering is that I can't get either piece of editing software to output properly and / or to the specified speaker / channel. Everything, all channels, are coming out of the Fl or Fr speakers. Playback of previously created 5.1 tracks (QT or .ac3 files), in QuickTime or VLC, are mapped properly.
What am I missing? I have a suspicion that the issue is the elimination of the Klipsch Digital preamp / control module. If this is the case, do I need a DAC that goes toslink in to toslink out and into my receiver? Id so, do you have any recommendations for a DAC?
Thanks.
Floyd

I haven't tried this, but one way around this might be to teach MainStage about the offending button.
Set up a new button in MS Layout & 'Learn' your patch change to it.
Having done that, disable the new button in Edit.
If you set this up at Concert level, it ought to prevent any patch change messages getting through to the rest of MainStage.

Does Soundtrack Pro come bundled with FC studio

I used to have the Soundtrack Pro program. Is this software included in FC Studio or am I hallucinating?
Thanks.

Yes, it does.
(124353)

Should Soundtrack pro 3 (bundled with the studio pro 9 I just bought) load on OS X Lion? Mine isn't. It gives an error saying to check if my software works with the OS.

This isn't a major problem for me as everything else is working but would like to know if it's known to not work on Lion.
Cheers,
Karl.

windows is windows does not matter if it's in bootcamp or not
in general one can't update drivers in safe mode
in general one can just install drivers on top of the earlier version

Soundtrack Pro with Final Cut Express

I've been using Final Cut Express HD for a little while with the version of Soundtrack that came with it. I'm now going to upgrade to Logic Studio and I'm wondering if Soundtrack Pro will work with FCE the same way. In all the documentation I've read thru, they only talk about Soundtrack Pro working with FCP. Anyone know?

There is no round tripping from FCE to Soundtrack Pro.

How many music beds does Soundtrack Pro come with?

In Apple's literature, they state that Soundtrack Pro 3 comes +"with over 6000 royalty-free Foley effects, sound effects, and music beds"+ Out of the stated 6000 are :music beds" if anyone knows. (round figure is fine) We talking hundreds or thousands?
Thanks
Bryan

Hundreds of music beds that begin and end - if you count a track that has a 30, 60, 3 minute version as 3 tracks.

Soundtrack Pro still crashes on start (new error)

Ok, I had the trouble because of iWork11 and Logic Pro 9 that Compressor was not istalled and because of that Soundtrack Pro crashed.....
Now I installed Compressor and Soundtrack pro comes along with another Error:
Dyld Error Message:
Symbol not found: _NSNavCommentFileProperty
Referenced from: /System/Library/PrivateFrameworks/BrowserKit.framework/Versions/A/BrowserKit
Expected in: /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
I already did the digital rebellion thing with getting the browserkit.framework from the install DVD but no change.....
any suggestions?

I had your original problem and called tech support. (Missing ProFX file). They sent me to reinstall compressor using this: http://support.apple.com/kb/TS3580?viewlocale=en_US
I didn't have your second problem though. If you have a serial number and support ID, I found the guys at Apple to be helpful. They're regular number 1-800-275-2273 then say, "Logic," to get right to the audio people. I don't know if this helps.

TS2510 problem with soundtrack pro v2.0.2 under snow leopard

Hi, I've just upgraded my mac book to snow leopard and now when I try to record something with soundtrack pro v2.0.2 through the line input jack, the internal microphone is still switched on and none of the preferences allow me to switch to the input jack,ks
Does anyone know whether STP v2.0.2 will run ok under snow leopard? If I need to upgrade the drivers, does anyone know where I can find these and how to instal them.
Many thanks.

There are no "drivers".
Use Audio MIDI Setup to set your audio input.
Good luck.
x

What's wrong with Logic and Soundtrack Pro

Just spent a frustrating day trying to record with Soundtrack Pro and Logic
Soundtrack is working on and off
Problems:
1. Even if sounds are loaded in the multitrack editor, no sound when playing. Only the Solo (S) button make a track sound. No idea what's wrong?
2. Trying to record directly into a multitrack sometimes works, and sometimes not.
3. When making another attempt to record, the noise of death appeared (same as the long thread on Logic.
Finally I just recorded in Amadeus Pro. At least that software works. It just crazy. Look I accept there is a learning curve but this s just crazy
Apple is becoming an arrogant company that is becoming more interested in creating gadgets that providing tools that work
Sorry for the rant

BenB wrote:
I've worked on both Windows and OS X (Unix), with a few apps over the years. No one can possible work with every app on every hardware configuration possible on every OS available. So to make the statement you actually have is preposterous.
That said, Logic is the most used software in project studios. Mixing engineers like ProTools better. But the two have way more market share than anything else.
Hey Ben,
Sorry to bump your fanboy applecart... (don't mean that as derogatory as it may sound, I liked the play on words)
From everything that's happening here and the west coast (USA) many of the Logic users I know have switched to other software, the two Logic studios here have gone to ProTools mainly because Logic version 8 was so unstable, there are no more Logic studios here. The studio with the most business uses a Radar system, the second busiest studio is running Sonar. There is a fellow with a mobile system using a MBP and Logic but he uses version 7.
The University here took bids 3 years ago and opted for PC/Nuendo/RME setups.
So yes, Logic may indeed have the most project studio percentage but since every jerk can download it for free what is the quality coming out of these project studios? My point is, for professionals, Logic is becoming less and less of an option, most everyone that used it professionally has been disappointed in Apples support of the product, a long time between upgrades and except for user boards like this... literally zero professional support. You know there's problems when you call up Apple and know far more about Logic than the support staff. It seems like both of those are starting to improve but I think it's a little too late. Also... there's still the "blast of white noise" problem that hasn't been addressed, no professional studio can take that kind of chance.
Apple is using Logic to sell hardware, smart business, absolutely. However, cutting the price in half, removing the copy protection and throwing in the kitchen sink plus seemingly not giving a d@mn that the program is pirated leaves a very bad taste in my mouth.
pancenter-

Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

Hey,
Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes. Also, this happens when I try to work with audio files in the file editor. I have Leopard and am using Logic Studio 8. Any insight would be much appreciated. Thanks
Matt

Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro. So I could go no further in my perverse science experiment.
It also appeared that I could only import an aif but not a wav?
I gave up on STPro and did what I needed to do in Logic, which I use regularly.
Thank you for folowing up on this.
PS. I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect. It appears that the new version (3.0.1) does not allow you to do this anymore? You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?
Im such a newbie at STPro that I am probably not using it right?

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

Trouble with Round trip between Soundtrack Pro 2 and Final Cut Pro 6

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Thanks.
What's I've been doing is exporting the Soundtrack files as AIFF files, then importing them into Final Cut...
It's working... at least well enough. Still seems harder then just being able to go back and forth between the two applications.
Thanks for the advice.

Error with automator & soundtrack pro

I'm trying to make a workflow that will take a finder selection of apple loops (including a folder) and open them with soundtrack pro and save as... AIFF files. I'm getting an error on the last step no matter what I do. I originally thought the aiff file options had to match the .caf attributes (i.e. same sample rate, bit depth, etc.) but fixing that doesn't seem to help.
Here's the error log:
2009-01-27 10:59:12 -0500: The action “Get Selected Finder Items” was not supplied with the required data.
2009-01-27 10:59:12 -0500: Get Selected Finder Items completed
2009-01-27 10:59:13 -0500: Open Finder Items completed
2009-01-27 10:59:13 -0500: (null) failed
An error occurred while converting \U201Ccom.apple.applescript.alias-object\U201D to \U201Ccom.apple.soundtrackpro.document.audiofile-object\U201D.
So here's what's weird: I keep getting this “Get Selected Finder Items” was not supplied with the required data," but the results shows the file I have selected in the file, and subsequent steps in the workflow show the selected file being passed correctly… so I'm not really sure what the problem is. I've written other workflows with the GSFI object and haven't seen this error before, so if anyone has an idea, I'd love to hear it.
Thanks much.

and the applescript alias of the file I'm working with is:
{alias "Macintosh HD:Library:Audio:Apple Loops:Apple:Apple Loops for Soundtrack Pro:Apple Loops:Andy Boretto:beepsandclicks1.caf"}
One other note - just to double-check, I deleted the "open w/ soundtrack, save as" actions and replaced them with "copy file, rename file" and the workflow completes without a problem– BUT I'm still getting the "“Get Selected Finder Items” was not supplied with the required data" error, so I'm still not sure what's going on there.

Soundtrack pro (1.1) with edirol ua-25??

Similar Messages

Maybe you are looking for