Soundtrack Pro and Audio already altered in Final Cut

I'm just getting my feet wet with Soundtrack Pro. I have a project that was edited in Final Cut Pro, including keyframes to adjust audio levels in specific places in the audio tracks. When the project is sent to Soundtrack Pro, the changes that were made in Final Cut Pro seem to be ignored. Is there something I'm doing wrong here, or are audio alterations made in Final Cut Pro not passed on to Soundtrack Pro? I'm using Soundtrack Pro version 2.0.2 and Final Cut Pro version 6.0.5.
Larry

Hi Lorenzo,
I haven't encountered this problem, however it sounds to me as though the waveform editor is sensing that the incoming signal is too hot & is automatically pulling down the gain to compensate and overcompensating to the point where the audio is barely intelligible.
What I would suggest you try is:
Select All Command (Apple) A then
Shift Command L. This gives you a window that allows you to boost the level. As the signal is so low, try 100%. If the signal is still too low do the same again. The Adjust Amplitude Filters will appear in the Actions List to the left of the Waveform. This is a nondestructive process & each Adjust Amplitude can be toggled on/off by unchecking it so that you can do a before & after comparison.
All the best
Dave

Similar Messages

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank you

Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

Audio out of Sync - Final Cut Pro to Soundtrack and back

I have edited some talking head interviews in FCP 7.0.3
When I "Send to Soundtrack Pro Multitrack Project" and then send back to Final Cut (by exporting an AIFF)
The audio is 9 frames shorter than the original audio. (The video is 06:29:12 long)
I have checked, and double, triple checked, and all audio is 48.0 KHz
Both timelines are Non-Drop Frame.
I have also tried the following when importing the XML back in to FCP
1. Leave Sequence Settings at "auto" with "Override with settings from XML" selected
2. Change Sequence Settings to "Apple ProRes 422 1920x1080 24fps" with "Override with settings from XML" de-selected.
I have looked and looked through forums and haven't found any real solutions, please help

Apparently, fcp can have a problem with imported audio files if the easy setup frame rate does not match your sequence frame rate.
I've seen this reported as well.
I actually created a new project, set up the "Easy Set Up" to match and ran into the same problem.
Initially the Music Tracks I used were a different audio rate (44.1 vs 48) but I converted those as well.
I'll have to chalk this up to user error, but I've truly been over this project with a fine-tooth comb so many times.
In general, it doesn't seem like there should be so much issue going from Final Cut to Soundtrack and back.
When I get some down time, I'm going to completely recreate this project from
scratch and see what happens.
Thank you so much for your time Michael.

New Soundtrack Pro and Final Cut Pro Updates...

There's new updates for Soundtrack Pro and Final Cut Pro on Software Update.
They seem to have fixed the problem I was having with one of my giant old projects. I used to have to open one of the audio projects before my multitrack project would open, but now it opens just fine. So far so good!

Hi Collings,
Looks like there are two threads about the recent FCP & STP updates, so I'm posting my findings here, too.
I just found another thing that appears to be fixed in STP 1.0.2:
Batch normalize is working:
I have a bunch of aif files that I want to normalize. I opened one in the waveform editor, applied process->normalize (level=0dB), then selected File->Save as Applescript--this creates an Applescript droplet. Then I can then grab a whole bunch of audio files and drop them all onto this droplet and they all get normalized correctly. This is a huge timesaver for me. Before this update, using this approach to batch-normalize a set of files seemed to deliver unpredictable results, but I just ran a whole set of files through, and they all played back with a peak level of 0dB (and no clipping).
Here are the other things that I've noticed so far with STP 1.0.2:
Automation:
-In STP 1.0.1, Automation was not applied correctly on project sample rates that were not supported by the hardware (e.g. play a 96K project on a laptop built-in 48K audio interface and the automation was late by 2X) -- this is fixed!!! YAY!
-STP 1.0.1 did not handle long automation ramps across long periods of silence (it would sometimes cause a glitch at the start of the clip right after the automation ramp--there is even a support article about this)--it seems like they fixed this one, too.
Sample rate switching:
-I see an option in general preferences to allow me to disable the "Switch hardware sample rate to match document", and with this disabled, I no longer get audible clicks from my audio interface when I switch tabs. Plus, switching tabs seems faster to me.
Realtime effects and automation in audio file projects:
-They've added a warning to inform folks about the need to bounce realtime effects and automation to an action--if you are in an audio file project with realtime effects that have not been bounced to an action and you try to save, you get a warning message.
Has anyone else noticed any other fixes or changes in this update?

Soundtrack Pro and Final Cut Server....can you check-in/check-out?

Hello!
Just curious how the workflow is with Soundtrack Pro and Final Cut Server. We haven't used Soundtrack Pro, but have been thinking about it for Surround Sound projects.

You can check in anything into FCSvr, any type of project file or media file. Unlike checking in/out a Final Cut Pro project, with any other application, you'll need to check out the project file for that app, and manually check out all the media associated with it. Many folks will simply set up the STP, or Motion, or InDesign, or Illustrator project and it's associated media all into the same folder on their workstation. Then check in/out that folder as a "bundled asset". This makes a zip file in FCSvr that holds all of those needed files together. When you check it out, it's unzipped and places on your local workstation. When you check back in, FCSvr re-zips it and replaces the original on it's RAID storage drive.

Soundtrack Pro and Compressor greyed out on installation

For some reason the option to install Soundtrack Pro and Compressor are greyed out when performing installation of Logic Stdio.
I had installed Logic Studio previously but ran out of disk space and so uninstalled the program, upgraded my hard drive and I'm now at the point of reinstallation - but can't install those two programs.
Here's a screen shot of what I get AFTER installing what I can:
http://www.btinternet.com/~wack/screen.jpg
Also, why do some of the programs have 'upgrade' under Action?
Thanks.

I tried Final Cut Remover, and still had the same problem. I am in the midst of using Pacifist and it seems to be working. Apparently Pacifist copies the compressed files to to your hard drive then extracts and installs the programs. It appears to be working, but I will let you know whenever it finishes if indeed it does the job...
It is free to try and $20 for a donation. It might be a bargain considering the time it will save me...

Uninstalling Soundtrack Pro and Loops

With the recent purchase of a MacBook Pro I also acquired the Final Cut Studio HD. I have run out of space on my local hard drive and in the process of cleaning it off and moving programs and files to an external I am looking to delete Soundtrack Pro and all of the Loops that come with that program.
What I am wondering is the best and safest way to remove these files without affecting the rest of the Final Cut Suite.
So if someone can clue me in on the best way to uninstall Soundtrack Pro, Soundtrack Loops, Motion and any program with Final Cut HD without affecting the others I would really appreciate it.
In a related question are the bundled software programs such as iPhoto and GarageBand located on any discs that come with the computer or would uninstalling them leave me without the option to reinstall them at a later date?
Thanks!
MacBook Pro Mac OS X (10.4.8) 2.16 GHz Intel Core Duo/2 GB SDRAM

iPhoto and GarageBand are on the Install discs.
Get the external drive and move your Final Cut files (not the app) there.
I imagine it uses lots and lots of space when editing. so make sure you clear out everything after you finish a project.

Help serious Audio rendering issues within final cut pro

Hello
I have some serious audio issues I am using Final cut 6.05. Here is my problem I am putting a AUParametricEq filter on my audio due wind noise etc. Anyway when i play it back on the time line it plays fine no problems but as soon final cut renders the file say for mastering to tape. at some point at the audio the audio goes all haywire, popping sounds or the audio just repeats it self at one frame or i can here audio from other parts of the timeline. And it just happened before i never had the issue. Is it the update. Hope anybody can help as I need to master about 6 projects to tape to clean my harddrives and all 6 projects have the same issue.

Are your audio files AIFF 48K 16 bit?
In regard to trashing preferences you can download Jon's Prefence manager at this site
http://www.digitalrebellion.com/pref_man.htm
The Old School method follows
Trashing preferences and repairing permissions.
Close Final Cut Pro.
Go to: Users/your user name/Library/Preferences.
Drag, "com.apple.FinalCutPro.plist" to the trash.
Scroll down to the Final Cut Pro User Settings folder.
Drag, "Final Cut Pro 6 Preferences" to the trash.
Drag, "Final Cut Pro Obj Cache" to the trash
Drag, "Final Cut Pro POA Cache" to the trash.
Go to: Applications/Utilities/Disk Utility
Select your system disk
Click on the Repair Permissions button
Wait for the permissions to be repaired
Restart your computer

No audio track anymore in final cut pro timeline

Hi everyone,
God I feel dumb but somehow i shut off audio tracks in my final cut pro. I can see the previous ones down that I laid. But if I try to bring anymore clips into the viewer and then slide them down to the time line there is no audio that comes with it anymore. What button do I click to allow audio to pull down with the video on to the timeline. Weird.

Make sure you have the audio tracks targeted by using the patch panel at the left of the Timeline. Also make sure that the tracks aren't locked.
-DH

Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?

Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?

No.. You can buy the Compressor (along with Mainstage) via the App Store as a separate download but STP and Waveburner are discontinued products. Some of STP's functionality can now be found in Final Cut Pro X...
Note: Mainstage, Compressor, Waveburner and STP were part of the full version of Logic Studio 2.0 (which also included Logic Pro 9 ) and sold for $999 compared to Logic Pro X which retails at $200...
The Apple loops/Jam packs that came as part of Logic Studio 2.0 now come free with Logic Pro X (and did so with the Appe store version of Logic Pro 9) .. as part of the additional downlaod

Installing logic studio 9, soundtrack pro and loops utility greyed out

Hi,
I'm trying to reinstal logic studio 9 and on the screen where you select and deselect the instal options soundtrack pro (and therefore compressor) are labelled as skip and greyed out not allowing select. The same is true for the apple loops utility. I'm pretty sure i removed all the files of previous instal. Anyone help?

nevermind i found this thread https://discussions.apple.com/message/10690183#10690183

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Block Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

I have a mac book pro and have already downloaded adobe flash player. However when i go to watch a video it says "Blocked Plug In". But my adobe is already up to date. Can someone help me to fix this so i can watch videos?

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine, can I change the Vieodcard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible?

I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine. Can I change the present Videocard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible? I have upgraded the memory to 4 GB 667 MHz DDR2 SDRAM.

The GPU in a iMac is NOT upgradeable.
You should check to see if your model of iMac meets the minimum specs to run FCPX.
I believe that your GPU is NOT OpenCL capable, and hence not supported.
Even if it works, you would probably get marginal performance.
What you can do is download the trial version and see how (and if) it works.

The Apple Mac Store is re-downloading and reinstalling the update called "Final Cut Pro X Supplemental Content" literally everyday.

My problem: The Apple Mac Store is re-downloading and reinstalling the update called "Final Cut Pro X Supplemental Content" literally everyday. I have a Mac Pro with Mavericks and Final Cut Pro X 10.1 installed. It seems to complete the update to the best of my knowledge. It shows it to be Final Cut Pro X Supplemental Content 1.0. Is there a later version (a 2.0?)? It seems it started when Mavericks updated. Anyone else have this issue or know a solution to get it to update once and for all?

hahah yeah i quit torrenting i have nothing but legit apps now.
hope apple heard that!!!!
your post fixed my issue
but it did take more than deleting torrented apps, once your run a program with a MASReciept with someone elses Apple ID. that other ID is saved in all apps you got off of app store.
You have to delete all apps that contain the MASReciept (the terminal command tells you which ones) then quit appstore then reboot download all apps again.
it taught me to just buy my apps..

Soundtrack Pro and Audio already altered in Final Cut

Similar Messages

Maybe you are looking for