Soundtrack Pro compatible with Final Cut Express?

I have Final Cut Express 4 installed and installed Logic Studio. Soundtrack Pro and Compressor did not install. Are these programs not compatible with FC Express?

From the Apogee website:
"Duet features two superb microphone inputs, each with phantom power and up to 75dB of gain. With Duet, you can record a pristine vocal track while playing your guitar or keyboard, stereo mic your acoustic or even capture a live concert."
http://www.apogeedigital.com/products/duet.php
It's ideal target audience would be laptop users in need of a high-quality, but very portable audio interface for Logic.
Message was edited by: lwilliam

Similar Messages

  • What's a camcorder that's compatible with Final Cut Express

    I just got final cut express and I am looking for a camcorder from $200 to $400 that's compatible with it. I don't know much about camcorders, and some simple straightforward suggestions would be much appreciated Thanks!

    Would you like to use tape or a tapeless storage variety?
    Tape cameras are miniDV or HDV, both work fine with FCE. HDV may well be out of the price range.
    A base model AVCHD camera (tapeless) will also be fine.
    Note: Standard AVCHD is OK but many cameras use variants like AVCHD Lite. Read the fine print.
    Al

  • What video cameras are compatible with Final Cut Express?

    I live in Japan and was thinking of buying a Victor " Full High Definition" video camera (1920x1080). The only thing I was warned about by the salesperson is that unless I have a Blue-Ray DVD recorder/player, I will never be able to enjoy true Full HD after burning my video to a DVD. I guess regular DVD recorders/players can't support it yet.
    I have searched to find a page that tells me what video camera is compatible with my iMac G5, but no luck. Any ideas on how to find out before buying a video camera? I would appreciate anyone's advice.
    Thanks, Larry in Japan
    iMac G5   Mac OS X (10.4.9)  

    ...snip...
    You want to stay away from recordable-DVD and hard-disk camcorders,
    ...snip...
    Hope you don't mind me asking why? - As long as they've got a F/W connector how does the source media make any difference? - In fact, I would think that shuttling around would be faster with HD's or DVD's.....
    I also believe the salesperson was trying to say that he's going to need a BluRay deck in order to be able to view his HD material on an appropriately equipped TV - Which is correct, no?
    Thanks in advance for any comments,
    Cheers,
    Ian
    MBP 2.16G / 2GB FCE 3.5   Mac OS X (10.4.9)   etc etc

  • Hard drive cameras compatible with final cut express

    What hard drive cameras are compatible with FCE,
    I purchased an imac and much to my dismay my Sony dcr-sr200 doesn't work with it..
    Thanks
    John

    What format do you want to work in SD or HD? You should really ask questions about camera purchases on the video production forum. There are many factors involved here, only one of which is its compatibility with FCE.

  • Using Vado HD with Final Cut Express

    I am aware that the VADO HD is not compatible with iMovie, but is it compatible with Final Cut Express? If so, during setup of FCE what option should I use for setup? HD, NTSC, PAL, Apple Intermediate Codec, or DV/Panasonic and then under "use" which option should I use?
    thanks for ALL of the help!
    tom

    crap.
    Ok, maybe you can answer a follow up question. So, I'm new at this.... but I understand that I will have to convert the video then. In that case, is there an optimal video conversion type that I should use so that I lose the least quality? I am using MPEG Streamclip as my conversion tool.

  • Compatibility issues with Final Cut Express and Final Cut Pro

    I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
    If I transfer project files from one platform to the other will i run into any issues?
    Thanks for all and any help.

    {quote:title=cuttingedge wrote:}
    If I transfer project files from one platform to the other will i run into any issues?
    {quote}
    Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Is the Canon Legria HF M56 compatible with Final Cut Pro X

    I am new to Mac and new to Final Cut Pro X. I am looking to buy a new HD Video Camcorder to use with my new computer/software and wondered whether or not the Canon Legria HF M56 is compatible with Final Cut Pro X.
    If it is, do you have to import the footage directly from the Camcorder, or can you first save the files to the Mac and import them that way?
    I currently use a Sony HandyCam HDR-SR10 which produces AVCHD .mts files. I have these saved on my Mac after transferring them over from my PC but Final Cut Pro X cannot import them. Very frustrating for a professional app to be unable to import these files. Even Cyberlink Power Director can use these files.
    Thanks for your help
    ConvertedAppleFan

    It's not on the tested list but it may well work.
    http://help.apple.com/finalcutpro/cameras/en/index.html
    Why don't you download the trial and try it?

  • I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
    Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?)  then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
    Thanks!!

  • Is my 2007 MacBook compatible with Final Cut Pro X?

    Is my 2007 MacBook compatible with Final Cut Pro X?

    Probably not the specs call for at least 256mb of VRAM. Depending on the model your MacBook is either 144mb or 64mb of VRAM
    http://www.apple.com/finalcutpro/specs/

  • Is Mt. Lion compatible with Final Cut Pro 7?

    I am currently running Lion (10.7.5) on a 27" iMac 3.4 Ghz.
    Is Mt. Lion compatible with Final Cut Pro 7 and FCS 3? Will these programs still run or will they be not supported by the new OS as has been the case with past apps when a new OS is introduced?
    Thanks,
    Phil

    I have a 2gig HD for backing up my system HD . The backup HD is partitioned into 20 - 1 gig partitions. I use the Carbon Copy Cloner app to make a clone copy of the system HD. Never had a problem. If I need to I can boot from one of the clone partition or copy file from.
    (Just make sure your FPC media and video files are on a external HD (firewire for example) other than a USB 2 HD. FCP does't work properly with USB 2 drives.)

  • The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • Are microsoft movie maker files compatible with final cut pro files?

    I would like to know if microsoft movie maker files are compatible with Final Cut Pro?
    Thanks,
    elemir

    depends on how you're outputting. .wmv I don't think so.That's pretty much a dead end format.  mp4 might be, but i'm not sure if movie maker outputs them. .avi might be, depends on the codec used.
    Avoid .wmv, apple products don't play well with that format (never have) and aim for some other output type. Then on your mac, if you don't already have it, if you don't already have it, get the free converter mpegstreamclip and see if it can convert your movie maker output into something final cut will input. DV files are good, as are .mov files.

  • Where can I download Christmas generators / title cards compatible with Final Cut Pro X?

    I'm looking for title cards with holiday themes, snow, Christams trees, ornaments and the like. Where can I find these? A quick search online I found site that said they weren't compatible with Final Cut Pro X.
    I went to rippletraining.com and after downloading got this error message...and yet I am unable to find any applications in the App store that meet my needs.

    kristydrums wrote:
    Okay, this seems out of my league! …
    you haven't tried!
    you managed to handle FCPX, a highly professional edit-tool.
    What I suggested, is just 'basics':
    compose a few elements.
    Get inspired by other videos you notice around.
    To animate 'elements', use keyframes.
    To apply 'overlays', green-screen/color-key is a basic procedure…
    To prep stills, a designated pic-processor is of fundamental need… although, even MacOS built-in Preview.app allows creation of 'knock-outs'/transparency… in case, you're shy to invest a few $$ for Pixelmator.
    It looks maybe complicated - it isn't!
    Don't try it first time for some serious projcect… but creating your very own Xmas-scenery is a lot of fun… plus, you learn a lot about FCPX and its many hidden gems…
    Final word:
    Catch some nice, own pics with your cam! … snowy trees, 4 candles and some cookies, a frozen window, illuminations in the streets, that crazy neighbour with his 50.000Watts of garden decorations .... Just add a charming title - done. Simplicity rules!  …
    Merry Chistmas!

  • Can you use the Logickeyboard Final Cut Pro X Shortcut Keyboard with Final Cut Express 4?

    I'm just wondering if the Logickeyboard Final Cut Pro X Shortcut Keyboard can be used with Final Cut Express 4???

    If you mean are the shortcuts the same:
    No they are not.
    Al

Maybe you are looking for

  • Error while checking in and storing document in storage category

    Dear Consultants, When i am trying to save a document in storage category thru tcode cv02n, its giving me error:- Error while checking in and storing document "c:/desktop/content.doc", while there is no error in csadmin and OAC0 tcode repository is i

  • Data access

    I have a fileLoader class that process multiple files and store data in a Vector of Vector structure(data matrix), then I need to access these data in my other classes to process them. Should I use static modifier for the Vector of Vector in order fo

  • Indesign : how to move a rectangle object with his content ?

    hi i develop an indesign extension with flash builder and cs extension builder 2. when I move a rectangle object containing an image with the geometricBounds property the image does not move and is not visible anymore ... how to move a rectangle obje

  • Maximum number of columns allowed in LOV

    I have some technical doubts 1)What is the maximum number a lov allows? 2)Maximum length of record group query? 3)Maximum number of items assigned using LOV? Please reply immediate Thanks in advance Manoj M

  • How can I do for ESA work with token RSA, I mean when I entry the login the authentication with RSA

    Hi there, How can I do for ESA work with token RSA, I mean when I entry the login, the authentication ask me the token with RSA, Is it possible??? Regards,