Soundtrack pro doesn't start

Since a claen install of OSX 10.7.1 and FCP Studio, Soundtrack Pro no longer starts. The start window flashes up for a moment, then it dissappears and nothing happens. All software updates are installed, work around from apple support (http://support.apple.com/kb/HT3659?viewlocale=en_US) didn't work either.
Can anyone help?

Hi,
So following the instructions you've tried removing the prefs and then reinstalling the software? If you have then there is something else conflicting your STP.
To resolve this you will need to do the following:
Open Console
With the Log list shown on the Left, select ALL MESSAGES
Cmd-K to clear the display
If you are getting messages at this point there is another, possible unrelated issue with your system.
Startup SoundtrackPro
Go back to Console and select all messages in the message area. Then Cmd-C to put into pasteboard.
Paste it back here and send for me to look at. Anything other than:
29/08/2011 11:44:56.558 MIDIServer: MIDIServer [34627] starting; arch=x86_64
is a likely problem. You might even be able to diagnose it yourself from this.
All the best
Pi Digital

Similar Messages

Soundtrack Pro doesn't start-up. What gives

I have used Sountrack Pro 2 for some time now, but suddenly it won't start up at all on the iMac G5. There isn't an "Application suddenly quit" message or anything. The icon simply bounces a couple of times and stops. Any help or suggestions would be greatly appreciated.

I had the same problem and fixed it by the following:
1. In the Finder navigate to Macintosh HD -> System -> Library -> PrivateFrameworks
2. Find ProKit.framework and trash it
3. Go to http://www.apple.com/downloads/macosx/apple/application_updates/proapplicationsu pport402.html and download the Pro Application support again to reinstall
4. It should now work
Regards,
Matthew

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

MacBook Pro doesn't start help help!!

My Mac book pro doesn't start following some issues with the touch pad.when I press on/off button it shows me a blank white board with apple logo followed by a text
"panic CPU 0 caller ...oxffffffffff801db."........
Debugger called
0xfffffffffffffffffffffffff
0xfffffffffffffffffffffff
0xfffffffffffffffffffff
0xfffffffffffffffffffff
.BSD process name corresponding to current thread init
Mac OS version
Not yet set
Kernel version
Darwin kernel version 12.5.0 sun sept 29 13 33 47 PDT 2013 root.....
Bunch of texts That doesn't last more than 2seconds on the screen followed by a white screen which says" your computer restarted because of a problem, press a key and wait few seconds to continue startup" in five more languages.
I only put some of the texts because I can't read them they don't last long
Any suggestion will be appreciated please.

I took it to a regular computer repair center and they said its an issue with the 1*8 gb and 1*2 gb totally 10 gbs i put in and then i replaced the 8gb with the old 2 gb that came with the computer and the issue is the same.
I tried reseting it to factory form that took 3days to download os 8 . and finally stopped by itself.
I don,t know if i had to take it to apple store?

Final Cut Pro doesn't start

Hi!
Got a problem with Final Cut Pro.
When I start it, the first window with the logo, version info and loading info appears. But it disappears after a few seconds, and Final Cut Pro doesn't start at all.
what's the problem and how can I solve it?

anybody with even an ounce of self reliance could tell you this, its the single most often raised issue on this and every other FCP forum and resource.
... whew, writing that was probably more long winded than just telling you the answer so clearly I'm the muggins here!
sounds like your FCP prefernces have corupted (who knows exactly why and how it happens, but it happens all too often)
download and install FCP Rescue form http://fcprescue.andersholck.com/ its a synch to use.
you can use it to trash your corupted prefs, and then FCP will make new good ones when you next launch it.
you can also use it to back up a good set, once you've reset all you particualr preferences in the User Settings...
and you can then use it again to restore those good prefs if and when it all happens next time

Soundtrack Pro doesn't work. When I open it, i can only hear a heartbeat ticking sound over and over again.

Soundtrack Pro doesn't work. When I open it, i can only hear a heartbeat ticking sound over and over again, then I get the spinning beach ball when I try playing a sound efx.

Update: I tried reinstalling firefox, same thing happened again. When i stopped the process "plugin-container for firefox", i could use parts of firefox (didn't get an error sound) for a while, until the process "plugin-container" startet again.
so what am i to do? switch to chrome?

Macbook Pro doesn't starts, turn off in progress bar (Yosemite)

My Macbook Pro (13-inch Mid 2012) doesn't start, I can submit my password but in progress bar the computer turn off.
I all ready reset the PRAM but the problem insists
What should i do?

     Reset PRAM. http://support.apple.com/kb/PH18761
     Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
    Start up in Safe Mode. http://support.apple.com/kb/PH18760
    Repair Disk. http://support.apple.com/kb/PH5836

MacBook Pro doesn't start - harddisk is not working

I am desperate. My girlfriends MacBook Pro unibody, with OS Leopard doesn't start any more. It shows the grey screen with the apple, but that's it. I tried resetting the NVRAM - it didn't help. I tried starting in Safe Boot mode - it didn't start. I have booted from the installation DVD and run Disk Utility, but it doesn't even see the partition and all the buttons to Repair or Verify the disk are grayed out. And the System Profiler doesn't see the disk, but instead just gets stuck while trying to read it.
After all this I did a deep Hardware test, but it didn't find any problems.
I suppose then that the partition, but not the harddisk is corrupt... any ideas?
And one more question: is there a way to save the data from the harddisk before trying to erase and reinstall the system, or taking it to the service?

Try putting it into Target mode...
http://support.apple.com/kb/HT1661
To try to read it's drive, or put another Mac with Firewire & a comparable OSv in T mode, hold the Option key down when booting the MBP to see if it'll boot off the the other Macs drive.
Long shot, but...
Either boot this one in Target mode...
http://support.apple.com/kb/HT1661
And recovering from another Mac, or booting this Mac from another HDD, then using Data Rescue...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).

Macbook pro doesn't start up anymore

Guys i got a pretty big problem. My 1st gen macbook pro doesn't wanna completely start up anymore. When i press the startup button, I get the bong and when the apple logo appears, it suddenly restarts. So the bong appears, the apple logo shows up and then it restarts again: this keeps on going and i cant stop it unless i pull out the battery and power plug. I have no idea how this is possible: I did nothing unusual with my computer. The only alarming thing that happened before this was a kernel panic. After restarting my computer everything was fine and the mbp seemed to have recovered. So I then left it as I went for dinner and when i came back, the screen was black en frozen. So I turned of the mbp and then it wouldnt start up anymore!!!
Can anyone please help me!!!

Place the OSX installation DVD that came with your computer and hold down 'C' during the restart. That should open up the installation/repair screen. There you can check your volume and repair it through Disk Utility. If you can't fix your drive here, you can restart your machine in target mode and backup your drive (given that you have another computer to back it up to) and then hard-format and reinstall. This might be a long and hard process but it should solve your problems. If you have more questions, just post.
Cheers-

10.5.4 installed, Macbook Pro doesn't start up

Hi,
I just installed 10.5.4 via Software Update. But now my Macbook Pro doesn't startup correctly anymore. I hear the start up sound then the white screen with apple and the spinning wheel. Then then fans start to grow louder and louder until the whole unit just shuts down and is off.
Has anyone already experienced this problem? Please help.
Thanks.
Best Rob

The combo update is only available from the Apple download site. The link is in one of the other 10.5.4 threads. Software update only uses a delta update.
Try booting in the safe mode, hold down the Shift key while booting. If you get to the login screen, don't login but hit the restart button. That should allow a normal boot - it forces a disk repair.
Otherwise, boot into the Leopard DVD, select the Utilities menu and run the disk utility from there and repair HD and permission. If that succeeds, you should be able to boot normally.
The update may have actually succeeded but the cleanup failed.
If you manage to get back into your system, check the version of your OS. It may be 10.5.4
If all else fails, you will need to restore your previous system using TimeMachine, although usually one of the above techniques will usually result in a bootable system without needing major surgery.

Macbook pro doesn't start after a long time of inactivity

hi,
MAC OS doesn't start when I switch on my macbook after a long time of inactivity. The HD seems to turn, the non activity led is on but nothing on screen.
I have to switch off the machine by pressing the start button during five seconds and then switch on again to launch MAC OS without problem.
the problem doesn't appear if the macbook has been switched off for a short time and only appears after a long time of inactivity
I dont'know if their is a hardware problem? can somebody help me?
macbook pro Mac OS X (10.4.6)

hello,
I have a the problem when the MBP is in sleep mode too for one hour for example. It doesn't wake up and the behaviour is the same as a power on.(power ok, hd turns , blank screen, activity led on, no launch of MAC OS)
I call apple support . They told me to look at the ram stick in order to find if the ram is in good place.
No differences , the problem is still present after disconnection an reconnection of RAM.
did someone find a fix at this issue?
thank you.

What does GarageBand have that Soundtrack Pro doesn't?

I'd like to see an up-to-date list of functionality that is available in GarageBand but not in Logic Pro or Soundtrack Pro. Can anyone direct me to such a list already on-line, or name some items? I've seen the old "STP - Logic - GarageBand Compatibility" thread, but it doesn't seem to give the detail I need.
Thanks.
G5 Mac OS X (10.4.6)

Logic has everything
that GB has even more.
Actually, that isn't true. As mlehmann said, Logic doesn't let you add podcast artwork.
I also believe GB has a feature that automatically records and compiles ichat sessions, with each participant on a separate track.

FCP Audio Clips in Soundtrack Pro - Marking the Start & End Points

When I double click on an audio clip that I've sent from FCP into Soundtrack Pro I seem to open up the entire media file.
How do I lock off or at least mark the clip start & end?
I don't see any markers that tell me which part of the clip is actually used in the imported FCP sequence.
I only want to make (non-destructive) changes to the clip.
I don't want to alter the original media file.
And I just want to work on the part that's used in the FCP sequence.
It makes sense that there's a way to show the start & end points of the clip but I'm just not seeing it.

I am a bit of a newb here, so pardon if my explanation is a little unpolished, but I have been working on some of my projects like you are and this is what i figured out. I select my sequence in FCP and send to stp as a multitrack project. The whole audio timeline shows up just as it looks in fcp, and the video track shows as one large clip that is made up of all my cuts put together. Now, my audio tracks are all on one line, and i can see all the clips with their cuts on the sequence. I click the first one and open it up to work on in the waveform editor. At that point i see the entire audio clip, including the part before and after my cut that i am using in my sequence, but i also see, up near the playhead, gray markers that show the actual part of the clip i am using in my edit. It is easest to hit shift-z to look at the entire clip on screen, and then find the grey markers. Also, if you play audio before the in marker, you will hear it but you will see that the video is not playing anything, then once you enter into the in-out section the video will play along, and when you pass the out marker the video freezes as the audio keeps playing. Hope this helps.

My Mac book pro doesn't start!!!

hallo! i have a problem, my Mac book pro 13' that I bought in June 2010 doesn't start. it appears a grey screen with some information like a terminal and then the message to push the button until it switch off and then retry. it's like so from yesterday and I tried to start it with cmd+v cmd+s but without solution. I'm not at home and so I haven't the install disk and I don't remember version of operative system. Please help meeee!!!
thank you Laura

Does the message look similar to what is explanied in this article?
Kernel Panic - Apple Support
I would also suggest to try starting your computer in Safe Mode which is done by holding the shift key right after you hear the MacBook's start up chime. If the computer is able to start up successfully in Safe Mode then the culprit could be something related to software.
Hope this helps.

Soundtrack Pro won't start

I have been using Soundtrack Pro successfully for many months. I tried to load the program today and it won't load past the Soundtrack Pro center banner. I tried trashing soundtrackpro.plist in preferences with no success. After that I created a new user account and under that account, Soundtrack Pro loaded with no problem. Does anyone have a suggestion as to how I can correct my main user account so that Soundtrack Pro will load correctly? Thanks for any assistance.

Disk Warrier fixed problem

Soundtrack pro doesn't start

Similar Messages

Maybe you are looking for