Soundtrack Pro installation Problems

The installer encountered a error that caused the installation to fail. Contact the software manufacturer for assistance.
The rest of the software is loaded. Audio content 1 is loaded. Audio content 2 and 3 won't load. Please help.

This is a discussion board, not Apple Support. Contact Apple directly:
http://www.apple.com/support/contact/

Similar Messages

Solution to common Windows 7 Xfi Elite Pro installation problem

Solution to common Windows 7 Xfi Elite Pro installation problems Hello,? I have just solved what I understand to be a common problem when upgrading a machine with an Xfi Elite Pro from XP to 64 bit Windows 7. Apparently the console control software for the "older" PCI Soundblaster cards for Win7 isn't done yet. If you've installed Win 7, updated the product identification module and run the new driver that you can find easily on Creative's support site and you still have no sound, try going to the Control Panel in windows. Switch the display to the "small icons" option and select "sounds".
Choose the "playback" tab. You should find a list of possible sound output devices that exist on your machine. You need to highlight the Xfi on that list and then click the "Set as default" button at the bottom of the screen. That should do it for you.
It did it for me.

C The 'solution' you provided only touches a very small fraction of the problems with Creative sound cards. Only very unexperienced users may not control which sound card is choosen by their operating system. Many of us work with PCs for decades, being used to modify the registry and so on. The drivers of Creative are of an unexcusable low quality.

Soundtrack Pro "unexpected problem" no Start anymore

Großer Schreck: auf einmal verweigert Soundtrack Pro den Start. Es lädt sich zwar das Programm, aber es gibt keine Arbeitsoberfläche mehr. Wenn man über die Menüleiste ein neues Projekt öffnen möchte erscheint folgende Fehlerbox:
An Unexpected Problem
NSRangeException
Cannot remove an observer <BinModule 0x121f2ab0> for the key path "arrangedObjects" from <NSTreeController 0x12527810> because it is not registered as an observer.
Auch der Klick auf OK (nach dem Motto, zur Kenntnis genommen..) öffnet keine Arbeitsoberfläche. Neuinstallation brachte nur dasselbe Ergebnis.
Hinweis: auf der Workstation befindet sich auch Final Cut Pro X. Diese Woche wurde auf 10.04 upgedatet. Ob es daran liegt...?
Hoffentlich hat jemand eine Idee... Über Soundtrack Pro wird eine wöchentliche Radiosendung geschnitten und produziert... Wir sind total aufgeschmissen, wenn wir das Programm nicht mehr ans Laufen bekommen..
Danke!!
Jürgen
www.reiseradio.org
Summary in english:
You see error message above? That's all, what I see, when I want to start Soundtrack Pro 3 since today... You won't get any workspace, but just the error message. Even re-installation does not solve the problem. On the Mac Pro, there is also an installation of Final Cut Pro X, which was updated this week to version 10.04. Might this be the source for all problems...? Anybody any idea? Hopefully, because we really need Soundtrack Pro for an project. Thanks!!

Vielen Dank!! Ich hatte zwar MOTION gar nicht auf dem Computer. Habe es jetzt nachinstalliert. Nach dem Öffnen wurde es zwar irgendwie automatisch gecrasht... aber zum Glück liess sich danach das ebenfalls neu installierte Soundtrack Pro wieder öffnen... Hoffentlich bleibt es so...
Uff... Sendung heute Abend gerettet...

URGENT- I need help: Soundtrack Pro Freezing Problem!!

I just sent my FCP project to a multitrack project in Soundtrack Pro, but when i want to work on the Soundtrack Pro project, everything keeps freezing. its dead slow!
i can barely do anything with it!
whats the problem? and how can i solve it?

Couple of possibilities. One, your media files are huge. STP reference the entire media of a clip edited in FCP . . . not just the edited portion. That can result in some large files being brought over. Also, when you send a clip over, use the base layer option if you can, or export an mp4 to bring in to STP.
If you're ready to do the post audio work on a finished FCP project, export an omf file. Close FCP, then open the omf file in STP. That can help.
Other "obvious" but still good to review considerations . . . have enough RAM? Is there enough disk space? Are you using a different media drive than where the system is located?

Soundtrack Pro / Flash problems

Since installing Soundtrack Pro, I have had problems with Macromedia Flash.
I installed Soundtrack Pro yesterday and imported MP3 voice-over files for correction & improvement and saved them as .aiff files for import into a Flash .FLA file on my MacBook Pro.
On importing the files, Flash began to behave strangely - notably, impossible to play the .FLA file to check it (file works OK when published to an .SWF file). Also, Flash refuses to import .WAV files created in Soundtrack Pro.
However, Flash works OK on a G4, where I have not installed Sountrack.
I have tried repairing permissions / deleting the Flash preferences file / reinstalling Flash... but these have no effect.
I would be grateful for any help/suggestions.
Best regards,
Garry

Thanks for the reply. I discovered what the stuttering problem in Soundterack was myself, by running around the Internet doing searches. It turns out that these G5 quad-core Macs have a defect in their optical ports on the back of the case. Light leaks in there and causes problems in Soundtrack. It can be cured by plugging both ends of a toslink cable into the ports, to prevent light from getting in there. One of these little cables only costs a few dollars on Amazon.com. I bought one and plugged it in, and the problem disappeared. Soundtrack now works smoothly.
It's too bad that programs such as Final Cut 7 and Soundtrack were simply abandoned by Apple, and declared obsolete and irrelevant, because they can still do excellent work. I have another, Intel Mac with the latest (as of last summer) Adobe suite on it, including Adobe Premiere, and yet I can do many things better in Final Cut than I can in Premiere (for one thing, Premiere can only open one project at at time. On my current video project in Final Cut 6, I have three projects open at the same time and am moving clips between them easily). However, now that Adobe has moved to rental versions of their software, my copy of Premiere is also obsolete, and gets no updates or improvements, just like Final Cut 7.
So I'm making my videos on my obsolete Mac G5 using obsolete software, Final Cut 6 and Soundtrack. I guess I'll remain a defiant holdout for as long as I can.

Soundtrack Pro "Unexpected Problem" Quits

This is driving me crazy...
Since installing Soundtrack Pro (as part of the Studio 2 upgrade), I've had a persistent problem: If I select any audio file listed in the browser, then move OUT of Soundtrack Pro (in other words, bring another application to the foreground), when I return to Soudtrack I get an error:
Unexpected Problem
NSInvalidArgumentException
* -[AudioSource model]: selector not recognized [self = 0xb378fe0]
... and it only gives me the option to quit, but it doesn't generate a "send problem to Apple" report. I can restart fine, and no other apps seem to be adversely affected.
It's the same every time. If I DON'T have an audio file highlighted, it doesn't error.
Any Thoughts?
Hardware:
Power Mac G5 (CPU: PowerPC G5)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 2.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
System Version: Mac OS X 10.4.10 (8R218)
Kernel Version: Darwin 8.10.0
Graphics/Displays: ATI Radeon 9600 (ATY,RV351) VRAM: 128 MB

Do you have FxFactory plug-ins installed? I turned these off by just un-checking them in the FxFactory window that pops up when you double-click the plug-ins, and the errors with Soundtrack went away completely.
Hope this helps.
-Drew

Soundtrack Pro Installation

I installed and re-installed the entire Logic Studio package. The ICON for Soundtrack Pro was nowhere to be found. During installation, I'm unable to check the box for SP as it's shadowed and has the word SKIP.

Use Pacifist to extract it manually.
(52596)

FCP and soundtrack pro roundtrip problem?

Hello I am working on a video in the latest Final Cut Pro and software. I need to take out the hum of the audio, but when I send the audio file to Soundtrack Pro and take out the hum and then save it, the audio goes offline when I go back to FCP and it says something like the attributes no longer match or something. What am I doing wrong? Is there specific ways I need to do this? When you send to soundtrack pro it asks if you want to send only referenced media. I tried both way but no go.
Any ideas?
thanks!

Interesting question - We don't use attorneys - too expensive, and we never listen to 'em anyway, so the info didn't come from a lawyer, ha ha. But I've seen several examples of music cue sheets, and they all contain the same information, including composer, publisher, society, timing, etc. (After all, that's the purpose of the cue sheet - to see that the artists and producers get paid for their work). You can find one format at:
www.ascap.com/musicbiz/cuesheetcorner/pdf/SampleCue
Of course, if the example comes from ASCAP (as that one does) or another society (BMI, others), they are working to make their job easier, but they are the societies - they are the ones who can object if they don't like it. And they have substantial power to penalize a producer for not doing what they want. But here's the thing: there's huge tradition in Hollywood, and the rule is (and the contracts say) that if you don't provide everything on the distributor's list of deliverables, they hold your money until you do - and one of the things on the list of deliverables is a music cue sheet, and every example I've ever seen (and I've seen at least 20) asks for the same information. So that's the answer as to "who told you that?" Is is possible that I'm being led down the garden path by ASCAP and the movie industry in general? Sure, but every source I consult agrees that this is the reality. I wish I could avoid it, but as I understand the situation, I have to do it, and it has to contain the info, or we'll never see our dough, ha ha. But my question remains the same - how do I get that info for the "royalty-free" music library attached to FCP?

Soundtrack Pro recording problems

I have soundtrack 2.0.2. Everything was fine until I downloaded and installed "ProKit" from Software Update yesterday (2-6-08). Now when I try to record, it stops recording on its own after only a second or two....sometimes it only records a few frames. I am running leopard, but soundtrack was working fine until the update. Is anyone else having this issue? Thanks in advance.

i also use STP 2.0.2. i have not done any recording up until now and i am frustrated by the same issues reported below. I will start to record audio and after approximately a second the audio record stops. I also use a macbook pro 2.4 and recording is not a problem. not having any more information than below and my experience with the intel laptop i would speculate it may be a PPC issue. any ideas would be very helpful. thanks

Acrobat 9 Pro installation problem

I have some problem while installing the acrobat 9 pro where download from adobe.com
While I start to install to acrobat 9 pro, then there will be a window that will count from 00.00% to 100%, right. After counting to 100%, the window will close and there is no more further action for me to choose. It seems that the install has stopped after counting to 100%. How can I solve it?

The most economical way is to return your purchase, get a refund, and then purchase the full version (somewhere?).

Acrobat x pro installation problems

Failure in the installation of Acrobat x Pro on Windows 8, please help.
Error Summary:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path .......multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path .......un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Davdddd,
We are sorry for the inconvenience caused to you.
If you are trying to install using the Disc please copy all the contents of the disc on the desktop and then re initiate the installation one more time.
Before you start the installation please try to use the Adobe cleaner tool to remove the previous installation left overs. To download the Acrobat cleaner tool visit: http://labs.adobe.com/downloads/acrobatcleaner.html
Or you may try to create a new Admin Profile.
Please let me know if that helps.
Regards,
Ajlan Huda.

Acrobat X Pro Installation problem

I am upgrading from Acrobat X Standard to Acrobat X Pro. When trying to install Acrobat X Pro I get this mesasge - "Setup has determined that you already have a more functional product installed. Setup will now terminate." And it does terminate! What would be my problem? The only other Adobe programs I have installed are - Adobe Air; Adobe Flash Player 11 Active X; Adobe Flash Player 11 Plugin

Yes you should. Although if you don't have an option to uninstall in Add & Remove Programs that is going to make it much more difficult. You can try using the Acrobat Cleaner tool however located at http://labs.adobe.com/downloads/acrobatcleaner.html.
Do you use a registry cleaner or any other type of system optimization utility btw?

Macbook pro installation problem

im trying to update my macbook pro to 10.5 with the cd but when i try to install it says it cant find 10.4 when i go to try to change the start up disk it cant find the hard drive, also when i try disk utility it shows the hard drive but doesn't show it the mountable session. please help

I assume you have the Leopard Upgrade DVD as opposed to the full retail version? Do you have Tiger installed on your computer and is it working? Sounds to me like you have either a corrupted operating system or a corrupted hard drive.
Do the following:
Repairing the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the drive is not repairable then you will have to reformat it before installing Leopard. If you only have a Leopard Upgrade DVD then you will first have to reinstall Tiger before upgrading to Leopard.

Adobe Acrobat 9 Pro Installation Problem

Hi, I just bought Adobe Acrobat 9 Pro. Cannot install it as I get a message that my serial # is for an upgrade version only of Adobe Acrobat Pro. I also have Adobe Reader 9 in my computer. What is the most economical way to install it without paying for further upgrades and/or versions? Many thanks, Oscar.

The most economical way is to return your purchase, get a refund, and then purchase the full version (somewhere?).

Flash Pro Installation Problem: Installation Location

Hi,
I am trying to install a trial copy of the software unto a VM
Desktop Windows XP machine. I want to install it on drive E:. But
the install appears to want to install at least 626.2MB worth of
files on C: drive (618.8 are apparently going to go to E:). Is
there anyway to tell the install to put all files on E:? There is
not enough space on C: and the installation program complains
"Installation cannot continue because there is insufficient space
available on one or more of the select drives."! How do I unselect
C:?
Thanks

Hi Coronos1
If you receive a message that stated “the file
doesn’t exist” it may be that the reset_min.cmd and
SubInACL files are not located in the same directory. Here are the
instructions that many have been using to repair the Windows
registry.
Please download Microsoft’s tool to your desktop.
http://www.supportflash.com/reset_min.zip
1. unzip the “reset_minimal.cmd” and the
“subinacl.exe” to the desktop
*** Make sure both files are on the desktop
2. Close out all applications
3. Run the “reset.cmd” file
4. It will open a DOS like terminal and start running through
registry keys
5. When it is finished it will say “press any key to
continue”
6. At this point you can download the latest Flash Player
from here: www.adobe.com/go/getflashplayer
If you required Adobe support, I can help you resolve this if
you open a case from here. Please reply with the case number.
http://www.adobe.com/support/contact/

Soundtrack Pro installation Problems

Similar Messages

Maybe you are looking for