Soundtrack Pro Mask Filter?

Is there a filter available for Soundtrack Pro that will make a speech sound muffled, like it is delivered from behind a gas mask? Where can I get it? Thank you.

Similar Messages

Soundtrack Pro Won't Refresh And Keeps Crashing!

Hi,
Got a lot of issues with Soundtrack Pro, so much so that I've been using the basic Soundtrack version rather than the upgrade.
I'm using a G4 with FCP HD and the biggest problem I have with Soundtrack Pro is that it just keeps crashing!! I've also found that trying to use the Graphic Equalizer function crashes everything, from Sountrack Pro, Soundtrack, right through to Final Cut. Every other audio filter works fine in Final Cut, except for the EQ filter. But lots of functions inside Soundtrack Pro, crash it.
I can only use it for short clips and short periods of times . But the worst thing is, if I save a clip either from Final Cut or from Soundtrack Pro itself, the moment I try and open that new clip, it doesn't appear in the browser. I have to close the software down, open it and THEN it appears in the browser. I can't find anyway of refreshing the file list.
Strangely this 'saved files not appearing' problem also happens in DVDSP, as well as Soundtrack Pro, but it never happens in Final Cut HD. Any solutions?

"is there anything unusual about the location where you save these files? (on a network volume, or something)"
I don't think so, although my boot drive was formatted separately from my video drive, they are both internal. But it doesn't matter if I save the file on the video drive or the boot drive, STP won't see them until I shut the program down and reopen it again.

From FCP timeline...send to soundtrack pro audio file project is greyed out

The send to multi track is not greyed out but that's not what I need.
The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track.
If I use "open in editor" to open a stereo file from the timeline soundtrack only imports one channel.
I'm trying to run these stero audio clips through STP using the waveform editor to quickly analyze and fix the "clicks and pops" also adding a low cut off filter to some of the clips to help eliminate some wind noise.
Seems the only way I can get it to work is to export each clip as an aiff file and then import it to STP, edit non destructively, save as a .stap file and then reimport that .stap file back into FCP........
Any ideas why the "send to STP audio file project" is greyed out? perhaps I have forgotten a preference setting somewhere?
All help appreciated.
Thanks,
Dave
G5 dual 2.0, 3.0 GB ram, 2x250 internal Mac OS X (10.3.9) FCP 5.0.4 DVDSP 4.0.3 Motion 2.0.1 Soundtrack pro 1.0.3 QT 7.0.4

Hey, Dave. That can happen if you captured your files with two audio tracks instead of a single stereo track. The two channels will show up on two tracks, but they're not actually stereo in the quicktime file.
When you captured, did you click the "OO" button next to the audio channels to link them to stereo? You can look at the contents of the quicktime file with Quicktime Player and see if you've got one audio track with two channels assigned to "left" and "right". If you have some other configuration in the file, check out these old threads for workarounds, or recapture if that's an option.
http://discussions.apple.com/message.jspa?messageID=1456638
http://discussions.apple.com/thread.jspa?threadID=259929

Sent FCP project to Soundtrack Pro but how do I get it back into FCP?

Hi everyone,
I just sent to project from FCP to Soundtrack Pro and now I am wondering how do I send the Soundtrack project back to FCP with the audio adjustments?
I know this is possible I'm just having a barin ** moment today.
Thanks

this is your work flow...
1 ctrl click on audio> send to soundtrack pro audio file
2 in soundtrack pro make the neccessary adjustments (noise reduction by any chance?). apply filter
3 save the soundtrack project...
when you save the soundtrack project, it automatically swaps the old audio file in FCP for the new 'sent' audio file... you don't have to 'export' from soundtrack to get the audio to FCP...
You won't actually notice the change in audio in FCP until you save the soundtrack project, and are working back in FCP.

Why cant Soundtrack Pro be sold seperately?

Hello, first time poster on the forum and i have a couple of questions on my mind.
I'm getting a microphone w/pop filter, sound foam, and a mixer. I am thinking of buying Logic Pro 7 as my audio program, as well as soundtrack pro. The thing is, I cant buy Soundtrack Pro separately. The audio reduction in soundtrack pro is amazing and Logic Pro 7 doesn't offer that feature, which is what I want. I was thinking of buying Logic Pro 7 and Soundtrack Pro and using them together, but unfortunately Soundtrack Pro isn't sold separately. I would have to buy Final Cut Studio which is $1299 and Logic which is $999. Spending $2,300 hundred for both is ridiculous because I just want Soundtrack pro. My question is why isn't it sold separately, and if it is does anyone know where I can buy it?
Thanks
Steve

It's not a program designed to appeal to the sound
design or the musical song & dance group.
Your opinion. While I would never use it for music, it's a good start at an app for sound designers. Unfortunately, they haven't given it the updates it needs.
It's a program designed to assist video editors to
prepare a mix that would suffice for a preview
screening & do a rough sketch to present to an actual
sound designer using Logic or Pro Tools indicating
what the editor or director had in mind so that the
sound designer can come up with something better.
While Logic can be used for sound design, it is not remotely designed for it and in some respects is worse than even the primitive release of STP. And I honestly think it could take the place of Pro Tools in many situations if they put the resources into updating it.
In my opinion, they wanted to put an end to all the
carping from the groups who bought the program for
the wrong reason. In most cases these individuals
have no interest in FCP, DVDSP or Motion. They want
to make music. I think the decent thing for Apple to
do is to offer to refund their money or at least give
them a credit towards another Apple program such as
Logic.
I don't think people bought the app for the wrong reason (I think few if any bought it to "make music"). I just think that people bought the app not realizing that Apple would abandon it and never update it past a version that is buggy and missing essential features.
While I'm annoyed with Apple and would certainly take a refund, I'm reluctant to give the program up because even the weak version it is at now has some features that I can't do in Logic (and the versions of PT available don't interest me).
Power Mac G5 quad 2.5 and Mini duo 1.66 Mac OS X (10.4.7)

Help...Soundtrack Pro to Final Cut Pro Problem...Needs to Be resolved ASAP

I am doing the following steps below (Phone Notch in Soundtrack Pro (and it works in Soundtrack Pro) and for some reason after I hit Apply Preset and return to Final Cut Pro, the preset isn't working. Am I missing something? Is there something I have to save. Please help ASAP.
Thanks.
1. Click on the effects tab and select the EQ in the Category section
2. Select the Channel EQ in the Effect section
3. Double click on it and an advanced window will open
4. On the bottom right side of the window click on the show presets button
5. Click open the triangle next to the User Presets
6. Scroll down and click open the triangle next to 07 EQ Tools
7. Select the Phone Filter Notch and click on the Apply Preset.

Thank you. I solved it.

How do i use the stretching tool in soundtrack pro

i have a split track song with muitiple track.got them all loaded in soundtrack pro,when i play the track there are i lot of skips please help big project for fathers day

O.K. so do you need to slow down the music, or speed it up? That's what the stretching tool is for, like in a video scene where the music slows to the tempo the actors are speaking. To use it; you must have an audio file: export multiple tracks by selecting them and choosing Export from the file menu. If you're trying to interlace audio then you should export each track individually and paste them together in an audio file. Next select the audio you want to change then drag the parameters of the selected music: either forwards to delay, or backwards to speed up, just like changing the crop of a photo. Be aware that you can drastically change the audio, trial and error works best, just use Edit>undo till you get it. Also try removing some clicks and pops in analysis.

Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?

Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?
I understand they are royalty free, I am just confused about using the actual loops for films, videos, etc - if there is a special license you must purchase or what?
Yes sure, it's a library and may be used a lot - but is it legal or against agreement?
And to clarify - what about music I create on the program , that is ok right?

If you purchased the software you have the right to use the loops that came with the software in the software to make whatever you want.

Have Added Soundtrack Pro Loops. Now Need To Delete Greyed Out Duplicates?

As you know, only half the loops come on the DVD and the rest have to be downloaded.
The downloadable loops appear greyed out in the Loops Browser until you download them.
I have added my Soundtrack Pro loops to the Loops Browser so now every downloadable loop is duplicated.
One is playable (the STP one) whilst the other is greyed out.
Is there any way of deleting the greyed out names?

Ian R. Brown wrote:
Is there any way of deleting the greyed out names?
re-index them:
http://www.bulletsandbones.com/GB/GBFAQ.html#reindex
(Let the page FULLY load. The link to your answer is at the top of your screen)

Installing logic studio 9, soundtrack pro and loops utility greyed out

Hi,
I'm trying to reinstal logic studio 9 and on the screen where you select and deselect the instal options soundtrack pro (and therefore compressor) are labelled as skip and greyed out not allowing select. The same is true for the apple loops utility. I'm pretty sure i removed all the files of previous instal. Anyone help?

nevermind i found this thread https://discussions.apple.com/message/10690183#10690183

Soundtrack Pro 2.0.2 Doesn't Open

STP won't launch at all. I installed everything from FCS2 once, then noticed STP doesn't open (all the other programs work). So, I trashed STP and the preferences and the logs and just reinstalled that from the DVD, then did the software update to STP 2.0.2. I didn't open STP from the time I uninstalled it until it finished updating.
All I still see is the white launch screen that says "Soundtrack Pro" (it doesn't even get to the GUI). The icon bounces in the dock for a while, then it'll just sit there, without the program running indicator. It says that it's not responding, and when I force quit it, it says it "quit while unresponsive."
Any suggestions?

I got an error message now:
An Unexpected Problem
NSInvalidArgumentException
* +[DebugController sharedInstance]: unrecognized selector sent to class 0x7d8700.
It's only happened once; the next time I opened STP didn't show the message, it just hung again.

Soundtrack Pro 2 keeps crashing...please somebody help :(

So here's my problem.
I am running Soundtrack Pro 2 on my Mac Pro along with my Digi003. Both Final Cut Studio 2 and Logic Studio 8 are installed on my computer. Every application works fine except for STP2 that keeps crashing all the time.
I tried to uninstall it, reinstall it, reinstall Compressor, downloaded updates, Core Audio updates as well for the 003, downloaded the last Pro Applications Support but nothing seems to cut it.
The issue is as follow. I launch STP, the application scans (for the hundredth time) my plugins and detects something like 287 plugins. HOWEVER, the application crashes when the counter goes to 290.
My personal feeling is that the problem might come from either a conflict between Final Cut Studio 2 and Logic Studio 8 that installed both STP2 or, most likely, three plugins (the difference between 290 and 287) that STP2 has a problem with.
These last plugins scanned seem to be Amplitube X-Gear, a demo I deleted, Melodyne, that I downloaded lately and I guess something else. Also, I precise that I have not been able to rn STP for almost a year and as I am about to work on the post of a new film, I would love to use it.
The last thing I did was running the Terminal app that gave me a detailed report of the problem. I don't understand where it comes from though. So here's the report. If somebody can help, I greatly appreciate it!
Terminal Report :
Last login: Tue Nov 4 12:04:29 on console
/Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro; exit
Welcome to Darwin!
romain-battaglias-computer:~ Romain$ /Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro; exit
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x740073; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x2f003c; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
1
2
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x10d8b000; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
IKDriverAPI::Allocate
IKDriverAPI::IKDriverAPI
IKDriverAPI::Connect
IKDriverAPI::Disconnect
IKDriverAPI::Free
com.apple.soundtrackpro
2008-11-04 12:34:19.153 Soundtrack Pro[501] NSExceptionHandler has recorded the following exception:
NSUncaughtSystemExceptionException -- Uncaught system exception: signal 11
Stack trace: 0x95a5c521 0xffffffff 0x9011072c 0xffffffff 0x2949295d 0x90ccf800 0x90ccf7da 0x90ccece2 0x90cd4354 0x0016a859 0x0016aad3 0x0016be76 0x0016c3bb 0x0016b527 0x9326fc9f 0x9326f8fc 0x9326ee45 0x93266479 0x93265ea9 0x93265b0a 0x95f2fd2d 0x95f2fff0 0x95f2ff10 0x0016dbc6 0x0016b4a6 0x0027fab4 0x927f2237 0x908553d2 0x9084cb51 0x927ea7c8 0x927f1769 0x9327a976 0x9327a860 0x9327a35d 0x93279f28 0x927f7f21 0x927f7d4b 0x915226c5 0x915225f6 0x915224c2 0x92df5084 0x9327811d 0x93277b37 0x932718c4 0x95e011b3 0x0027d129 0x0000352e 0x00003455 0x00000001
2008-11-04 12:34:19.153 Soundtrack Pro[501] Exception raised during posting of notification. Ignored. exception: Uncaught system exception: signal 11
Killed
logout
[Process completed]

Probably an imcompatible plug-in.
Try renaming the plug-in folder momentarily, see if it boots okay.
If it does then you'll have to isolate which plug-in is causing the problem.

How do I get a mixer to show up in Soundtrack Pro?

The problem is not using a mixer but I can't get one to show. I see my sound track, (can play) and did analysis and cleaned up but clicking all mixer buttons and choosing a different layout all 3 choices never give me a mixer.
The lower pane with the mixer highlighted is blank. I also set up a new project choosing multitrack with mixers or Seperate Mixer and video which show the mixers but as soon as I put my aif file into Soundtrack the mixer disappears from the window only the wave forms are there. I have posted this several times.There must be somebody who has a clue what is going on here? (Apple?)Thank you.
W.W.

Since nobody could answer my cry for help (no you don't find it in the manual) I am entitled to the 10 points finding the solution. Here is how to get around not being able to get a mixer for your aif file you want to edit. When you double click Soundtrack Pro an empty window opens with an empty track 1 and track 2.
As a seasoned Apple user you think drag and drop the .aif audio file into those tracks you want to edit and use in your movie. Well you are in for a three day search for answers how to get that mixer to open that you want to use! If somebody (or the manual) would just say you can't do that you could have saved that time to do what you need to do!
In order to get the mixer(s) you need you must:
1. click on "New Project" on the top left: window opens with both video and audio mixer tracks in which you can drop you audio. You can than open Layouts and choose from 3 layout choices of mixers. Happy panning and mixing.
W.W.

While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
Any ideas why? and how to get my tracks back?
I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
The 2 songs having the issue are titled Exotic Yearning and Reunion.
I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
Any thoughts and help would be greatly appreciated!
Thanks!

After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
Very Frusterated...:(

TS2510 problem with soundtrack pro v2.0.2 under snow leopard

Hi, I've just upgraded my mac book to snow leopard and now when I try to record something with soundtrack pro v2.0.2 through the line input jack, the internal microphone is still switched on and none of the preferences allow me to switch to the input jack,ks
Does anyone know whether STP v2.0.2 will run ok under snow leopard? If I need to upgrade the drivers, does anyone know where I can find these and how to instal them.
Many thanks.

There are no "drivers".
Use Audio MIDI Setup to set your audio input.
Good luck.
x

Soundtrack Pro Mask Filter?

Similar Messages

Maybe you are looking for