Soundtrack Pro not rendering FCP sent files

I have not been able to get STP to intergrate with FCP. I export with Audio file Project, do some processing, save in STP and when I get back in FCP it can't find the file. I get the error message that "Some Files went offline" when I try to reconnect it appears there were no render files made but can find no way to rectify this. Please help. Thanks.

When I send from FCP to STP it asks to "open a project file". The can be edited as a *.STAP file. When I save teh *.STAP file and got back to FCP - the audio in the FCP timeline has been updated with the changes.
This is what I understand to be the "nondestructive" way to handle it, since it is not altering the original audio file it is only changing the project file.
Still, this workflow isn't working. When going back to FCP after the audio is changed, STP crashes, or throws the FCP audio offline. When I try to re-connect the audio, FCP is looking for a " :render" file that does not exist.
To me, this means STP isn't properly rendering or saving the file.
I've not been able to upgrade my STP yet (still on 1.0), I wonder if this was fixed in later versions??

Similar Messages

Soundtrack Pro Crashes when opening Audio File Project

I am just starting to use Soundtrack Pro 2 with FCP 6. When I try to send an Audio File Project from FCP, Soundtrack Pro starts up, then closes. If I try to open the Audio File Project within Soundtrack Pro the program closes. Any Suggestions? Thanks.

In trying workarounds, I exported the clip as a movie from FCP then tried to open it in Soundtrack Pro. STP closed. I also tried opening the (sent).stap file that FCP generated, and Soundtrack Pro closed again. Also, STP does not give me the error window saying the program closed unexpectedly and do I want to report it. It just stops. Any thoughts? Thanks a lot.

Soundtrack Pro making a LOT of files - used to working in Logic, need help

So I'm used to working with Logic Studio/7.2/etc, and it's my first foray into working with Soundtrack Pro at work. My questions are this: When I use the razorblade tool (since I can't find an equivalent to the split tool in logic) in soundtrack to cut up a sequence, it seems to be creating a LOT of extra files:
http://www.1217design.com/pics/stp_question.png is an example of what I mean. Is this supposed to happen? The recorded files themselves were done in FCP and sent to Soundtrack Pro via the Send to STP Multitrack session function.
What I'm trying to find out is: Is this supposed to be happening? How can I stop this from happening? Are all of these extra files necessary in order to export the final project? And what will happen if I delete them?
I just want to know because the folder is now 4.71gb for a 30 second audio file (the final aif export is roughly 30mb), and there's over 200 of these extra files that have been created in the process of working on this project.
If this is what is necessary to work in Final Cut then I won't be able to work with FCP due to size issues (which is a shame as I feel so much more comfortable working within that environment than I do working in FCP).
Thanks for the help in advance,
Sean

Sean A wrote:
By doing this, will it still create all of those extra files? That's what I'm trying to figure out. Is it just from the blade tool being used?
For all edits, yeah, baby, STP will generate more files than cows create methane.
First, I know what works for me, but I'm still learning, so I strongly encourage you to keep a COMPLETE BACKUP of all projects until you know your workflow. Also, you may have Preferences set up differently than I do, so you may not find the same paths as what I describe here.
When you have an audio file the way you want it, and you're confident that you won't need those edit files again (be SURE) Process > Flatten All Actions (or Audible Actions) and Save that audio file. Then -- as I understand it so far -- you can safely trash all the edits related to that file. (If you use Photoshop or similar visual programs, it's the same idea.)
During my first few weeks of intensive STP work, my drive grew more and more sluggish, for no reasons known to me. I saw disk space shrinking rapidly. Finally I figured it had to have something to do with STP, so I started searching and eventually I found my edits piling up in home/Documents/Soundtrack Pro Documents, especially (for me) in Edited Media. Since they all came from projects I'd finished and exported to AAC and MP3, I was comfortable trashing them all. Suddenly, whoa, I had an extra 12 GB of disk space available.
Just keep those edit files until you are CERTAIN that you know what you're doing and that you're DONE. Otherwise, when some project needs one precious little 3MB turn of a phrase, you may find yourself confronting suicidal or homicidal tendencies.
I welcome further clarification and/or correction from people who know more and can explain it better.
Best,
chuck

Soundtrack Pro back to FCP some clips lose volume

I'm having issues exporting a final mix from Soundtrack Pro.
I didn't have this issue with the last version on my PowerMac.
I send everything to STP from FCP, mix it, export it, and bring it back into FCP and one file (dialogue track) is not included.
I go back to Soundtrack pro, it won't play there either until I re-open the application or move the file to another track, but still, when I do that and re-export, the same thing happens.
Any advice would be GREATLY appreciated.
Also (and maybe related?), when I open this file as an audio file it comes up with what looks like a 5.1 surround setup.
I couldn't find anything in preferences that would allow me to open it as a simple stereo file.
That would be cool.
Thanks again for any help/advice.
Best,
Terry
Message was edited by: flimTV

Thanks for the reply.
Everything is being sent to submix 1,2 and the master mix seems cool. I actually don't have surround issues (I don't think). It's just that the .mov files have 4 tracks of audio (HVX200) and four tracks always come up when I open the audio files in the audio editor. For some reason my mind went right to surround issues (all my faders are set to stereo pan).
The issue I'm having feels pretty strange...one group of tracks (all from the same source .mov file although it's always a different .mov file with each project I try) always fails to export (both in master mix and individual tracks). I don't get any error message, I just can't hear that track. All the volume levels, envelopes, etc...are fine in STP.
When I return to Soundtrack Pro, I can no longer play (hear) those tracks, but if I open one of these tracks that has an issue in the audio editor or manipulate it (switch to surround and then back to stereo, etc...) I can hear it play once again in Soundtrack Pro, but, once I try to export it to FCP the same thing again.
This happens with EVERY project I try, one file at least.
I'm in the middle of a feature film and It's madness.
Any help would be great and very much appreciated.
Best,
Terry
[email protected]
Message was edited by: flimTV
Message was edited by: flimTV
Message was edited by: flimTV

Sent Mail not found in sent file

This started a few weeks ago. Sometimes when I send a new message, it does not show up in my sent file, leaving me wondering if it was sent at all, and preventing me from reviewing the email too.
I looked in preferences for MAIL and I do not see a way this could be a choice that I somehow allowed. I do have most of my sent file emails, just occasionally don't have all of them. One did go through, the recipient answered back.
I have the Snow Leopard limited version of iCloud and use the MAIL on iMac most of the time. The disappearing sent emails are the same in both locations.
Can anyone help me with this?
Thanks

Hi Ric,
I have the exact same problem - I do also have two "sent" folders.
It's like this: when I send from my web-mail the sent mails is in "sent folder 1" - when I send from the application Mail the sent mails ends up in "Sent folder 2"
Best
Kudsk

Soundtrack Pro not opening

One day, I opened Soundtrack Pro after a few weeks getting the upgrade from Logic Express 9 to Logic Studio 9. It wouldn't open, and I got a message:
Process:         Soundtrack Pro [248]
Path:            /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier:      com.apple.soundtrackpro
Version:         3.0.1 (960)
Build Info:      SoundtrackProProject-9600000~277
Code Type:       X86 (Native)
Parent Process: launchd [118]
Date/Time:       2011-12-18 15:04:18.255 -0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          -217940 sec
Crashes Since Last Report:           -2
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      86389517-482B-45DA-802A-F2DFF852975D
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
    0x1000 -   0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 -   0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 -   0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 -   0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 -   0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 -   0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 -   0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 -   0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 -   0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 -   0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8feaf000 - 0x8fee19c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x912bd000 - 0x91304fff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x9148d000 - 0x9148dfff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x9212b000 - 0x9218ffff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x92aa5000 - 0x92aa5fff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x937f2000 - 0x93944fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x9443a000 - 0x9443aff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x94655000 - 0x94907ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x95c94000 - 0x95f19fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x96830000 - 0x96830fff com.apple.Carbon (153 - 153) <A75A970B-6D82-3451-8D3E-05B1A130ABDE> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x96c19000 - 0x96c7affb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x97c04000 - 0x97c12fff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x97c92000 - 0x97c92fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x98801000 - 0x98962ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x9aec1000 - 0x9b097fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
Model: iMac12,1, BootROM IM121.0047.B1D, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500.11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
I went to the Apple Store and asked about this, and they said I should reinstall Soundtrack Pro. I tried trashing Soundtrack Pro, and popped in the installation disc for Logic Studio 9 (upgrade from Logic Express 9). I tried, but the button for Soundtrack Pro was disabled. The Apple Store told me I should go to Genius Bar and get my iMac fixed, but before I do that, I wanted to ask here. Please Reply!
P.S. I do have the latest Logic update.

Soundtrack has crashed for me as well. I went to Digital Rebellion, took out Soundtrack, deleted Soundtrack in trash, reinstalled from originals TWICE and come up empty handed. I have to do a hard shut down of Soundtrack just to get out of the program- that's where you shut the computer down at the CPU.
It's really looking like Soundtrack is a dead program. It's very depressing to a voiceover with lots of saved tracks that can only be opened in Soundtrack. I use a Mac Pro 8 core (Snow Leopard) and all of my other programs work fine. Anyone know a solution or have a suggestion for a multitrack program that can do what Soundtrack once did for me?
Hey Studio X. Been a while. It was going well for me but it seems like the end of the road. Any sage advice?

Email sent from iphoto is not listed in sent file

I use an iphoto template to share pictures in iphoto email. The emails are being received but they do not show up in my sent file so I can not check to be sure they were actually sent. I can't figure out why ????

iPhoto doesn't have a "sent file". Simply, emailing from iPhoto is a handy way to send pics to Grandma, it's not a substitute for an email client.
You can bcc yourself automatically. It's an option in the iPhoto Preferences.
Regards
TD

Compressor and Soundtrack Pro not installing even if Final Cut isn't there

Hello,
I have a problem installing Compressor and Soundtrack Pro that I don't know how to solve.
The "read me" note of the software says, "Warning: Soundtrack Pro 3 and Compressor 3.5 contain updated components that are incompatible with Final Cut Studio 2 or earlier. If the Logic Studio installer detects Final Cut Studio 2 or earlier on your system, it automatically deselects the checkboxes for Soundtrack Pro and Compressor in the Custom Install pane."
Problem is, I've never had Final Cut Studio installed and the installer still deselects Compressor and Soundtrack Pro, and I cannot find a way to install them.
I'm using a new MacBook Pro and everything is up to date on it. I haven't installed much of anything else on this machine either.
Can anyone help?

Hi
Perhaps these will help:
http://support.apple.com/kb/TS3580
http://discussions.apple.com/thread.jspa?messageID=13051934&#13051934
CCT

Soundtrack Pro Not Booting Up

I have recently bought a macbook pro for my job as i am on the road a bit now, and I installed it using my G5 as a target drive, Every application works perfectly in my final cut suite after the install except Soundtrack Pro, when i click on the icon to start the program it bounces once in the dock then nothing happens. Can someone please let me know if they have had the same trouble after a target drive instalation and if so the cure?.
Thankyou - Gavin

I got on the phone to the apple support line and they put me thru to the final cut pro guys, basiclly after a 45 minute problem solving time and them saying "really the best way with a program of that size is to install it fresh", it came down to uninstalling the whole suite and doing a fresh re-install of it all.
The upside was i regained 2 gig of hard drive space back on my mac book pro and it didn't have to re install the libraries which made the whole process a lot faster.
All in all - a bit of a pain but it all works sweet.
i have answered my own question!!!
Gav

Why can't my new Macbook Pro not see individual MTS files on the sony cx700 flash drive? How do I get AVCHD MTS files off the camera not using imovie or FCP?

Hi,
I bought a new MacBook Pro (OS X version 10.8) recently to replace an older version. I work with different Sony cameras (Hard drive and flash drive storage), but when I connect the cameras (Sony Cx560, 700 and XR520) to the Mac it only shows an AVCHD icon. Usually you can see the individual files. We have 3 Macbook Pro's here and on 2 of them it works. Is there a setting or a driver I need to download for this new Mac? The other ones read it without intsalling anything.
Thanks for any tips.

There are two (and probably more than two) third party apps that will do this.
1) ClipWrap
2) Voltaic

Flash Pro not open or create files.

Hi, I have Flash CS5.5, but this problem happens to all the Flashes I use, the CS4, CS5, CS5.5... I dont Have the Flash CS6/CC (My PC don't runs the trial), but the problem not apply in CC and CS6 versions...
The problem specifically is this:
I open the Flash opens normally, and I see the "Welcome" screen...
But if I click-on any document, or attempt to create a new file ...
Just is static and I can not do anything else...
In the best of cases, the program stops working and ask me to close it. (It's a "Crash").
Sorry for the bad english... Not is my origin lenguage.
¡HELP PLEASE! I cant live without my Flash CS5.5... Is my work tool and my entertainment tool.
Spanish/Español: "Flash Pro no abre ni crea ningún archivo".
Yo uso Flash CS5.5, pero ésto me pasa en cualquiera que sea Flash CS5.5, CS4, etc... En el CC o CS6 no, pero no los uso porque mi PC no los corre. Verán, yo corro Flash como siempre e inicia normalmente, con la pantalla de bienvenida. La cosa se pone fea cuando cliqueo en un archivo o a crear un nuevo archivo. La pantalla del programa simplemente se tilda y no hace absolutamente nada o en el mejor de las situaciones me avisa que el programa deja de funcionar y me pregunta si quiero forzar el cierre.
My PC:
•Windows 7 Ultimate (With Windows 8.1 too happens this).
•Intel Core i7 - 8 CPU's
•6Gb RAM
•750 HDD
•AMD Radeon HD 6650M.

Have you tried to uninstall it and reinstall it? I imagine you have but I figured I'd ask. Do other Adobe products behave the same way or just Flash? Maybe roll back the driver to an earlier version? It also might be a graphics card incompatibility. It's probably not the answer you want to hear but you might try using an Nvidia card instead?

Premiere Not Accepting FCP XML Files

Premiere CS4
FCS 3
Every time I try and import a file from Final Cut using the XML script into Premiere, Premiere tells me that the importer has reported a generic importing error. To my understanding, the Apple's XML Script was largely set for importing into Premiere. Does anyone know what a generic importing error is? Has anyone else had this problem?

Not that it's ever any consolation, but it is 11 months since I bought a brand spankin' new hi-powered computer and installed CS4, and it is only now that all the bits and pieces have settled down enough to actually do any work without some problem or another.
I have shut off automatic updates for all my software and can guarantee that there is nothing that will entice me to upgrade/update/modify what's working. After almost a year of putting up with Adobe and Apple's crashing matches, I have a system that works and I intend to keep it that way.
No Win 7, No CS5, No FCP3!
I'll never understand how AE and PS can work so flawlessly while all the NLE's are a disaster.
Have fun all you early adopters! From here on out, I'm with Jim Simon!
UPDATE:
AFTER EXTENSIVE TESTING, IT IS APPARENT THAT THE FCP STUDIO 2, IMPORTED XML TIMELINE STILL CAUSES PROBLEMS.
FOR EXAMPLE, MARK AN IN AND OUT POINT AND ATTEMPT AN EXTRACT. BE SURE TO SAVE YOUR PROJECT FIRST BECAUSE IT WILL LOCK UP AND NEED TO BE REOPENED.
OKAY, SO LET'S JUST DELETE IT. NOW GRAB THE REST OF THE TIMELINE AND TRY TO CLOSE THE GAP. ANOTHER CRASH!
YOU WOULD THINK THAT ADOBE WOULD WANT TO HAVE FCP PROJECTS IMPORTED INTO PRPRO, BUT THEY STILL DON'T HAVE IT TOGETHER.
UNLIKE BEFORE, I CAN NOW PLAY THE TIMELINES AND DO SOME LIMITED EDITING LIKE DRAGGING EACH CLIP ONE AT A TIME IN THE REST OF THE TIMELINE TO CLOSE THE GAP AFTER A DELETE AND CAN EXTEND OR SHRINK A CLIP BUT CANNOT ACTUALLY EDIT IN ANY WAY ANYONE WOULD WANT TO BOTHER WITH.
THIS IS A YEAR AFTER CS4 WAS RELEASED! I CAN'T EVEN BEGIN TO IMAGINE HOW LONG IT WILL TAKE TO INTEGRATE XML'S FROM THE NEW VERSION OF FCP.

WD Smartware Pro not backing up certain files and/or folders - Solution

Hello all, I have recently bought a WD My Cloud, and installed the WD Smartware Pro software. I noticed that some files/folders were not being backed up. After troubleshooting the issue, I have found the following: - Right click on certain files doesn't gave me the option to send it to WD Smartware.- The same files were not showed in the explorer view of the backup tab, in Smartware (where you select what to backup). Now, the interesting part of this, is how I fixed the issue: - Went to C:\Program Files\Western Digital\WD SmartWare\Plugins and edited baseblacklist.xml file, removing the <attribute value="temporary" /> text. This is because I have found that the files affected had the "T" attribute (which means Temporary).- Went to C:\Program Files (x86)\Western Digital\WD SmartWare and edited documents.xml, adding <extension value="*.xps" />
<extension value="*.oxps" /> In my case I have added those two entries because I have found that no xps/oxps files were not being backed up. If you right-click on a file and the context menu does not offer you the option to send to Smartware, then you have to add the extension in the file related to the files affected (i.e. documents.xml, movies.xml, etc.). In some cases, the xml files related to the content to backup are in one unique location. I don't know why in my case it's in two locations (program files and program files (x86)). I think that may be related to the fact my laptop is x64. Once you did all the modifications, you have to restart your computer, or if you prefer, the two services related to the product, which are: - WD Drive Manager.- WD Backup. If you restart the Drive Manager service, then you will restart both services as are dependant. I have Windows 10 Enteprise x64, with latest version of Smartware, firmware, etc. Hope it helps.

Hi there, welcome to the community. Thank you very much for sharing how you solve this, hope it helps some user on the board.

New messages not recorded in Sent file. Can't save to drafts

New MacBook, Tiger. Searched forum without success. Asked other Mac users without success. Please help if you can.
I run my own mail server (postfix, courier imap). Mail using thunderbird and the same settings works flawlessly. When I use Mac's mail program new messages aren't saved to draft periodically as I compose and I get an error about that. New messages get successfully sent; but, are not posted to the sent folder.
The [preferences - accounts - mailbox behavior sent - store messages on server] is checked.
I connect to my mail server over ssh and forward ports 25 and 993 for uber-security reasons. I haven't tested to see if this is effecting this problem.
Any thoughts?
Regards,
RJF

Where do server-stored mailboxes appear in Mail? Do they appear as subfolders of the account’s Inbox maybe?
If server-stored mailboxes appear as subfolders of the account’s Inbox in Mail, this account requires INBOX to be typed in Preferences > Accounts > Advanced > IMAP Path Prefix for Mail to manage and display its mailboxes properly. After having done that, Mail should be able to save messages on the server, but maybe in a mailbox different from where you want them to be. To fix that, select the desired folder in Mail and choose the appropriate option from Mailbox > Use This Mailbox For.

When I render my project to a NTSC file for Computer play back, the audio is not rendered and the file has no sound. How do I fix it?

I build my project using videos and photos and I add sound at the end for a few photos. I then render the project to a NTSCDVD Standard file so I can play it on a Computer. Once the file is rendered and I play it, there is no sound at all. I am using Premiere Elements 13, recently installed on 12/29/2015. Previously, I had a trial copy and before I could uninstall it, it disappeared. I don't know if that had any thing to do with my full version.

richardson
On what computer operating system is your Premiere Elements 13 running? For now I will assume Windows 7, 8, or 8.1 64 bit.
What are the properties of your source video and photos and what project preset did you (manually) or the project (automatically) set as the project preset
to match those source properties? In this regard, please tell us the readings that you see under Edit Menu/Project Settings/General
Editing Mode
Timebase
Frame Size
Pixel Aspect Ratio
even if the fields look grayed out.
What is your choice under Publish+Share/Computer/ which is using the NTSC DVD Standard preset? Are you using Publish+Share/Computer/MPEG with the NTSC DVD Standard preset? If so, are you using the default export settings or customizing them in anyway under the Advanced Button/Video Tab or Audio Tab? If you export your Timeline to Publish+Share/Computer/QuickTime with a preset = NTSC DV, does your file have sound in the export with your player?
What are you using as the player for this export?
Let us start here and then decide what next?
Thanks.
ATR

Soundtrack Pro not rendering FCP sent files

Similar Messages

Maybe you are looking for