Soundtrack Pro v2.02 update problem

i've got quick time 7.3 and when i run
my apple software update, it tell me that i am up to date
but no sound track pro v2.02
could sombody help me...

I know ,but when i try to download the update from the apple support download page,
they ask me to give a finul cut pro serial number.
and i haven't any cause i'm a poor logic studio user.

Similar Messages

  • Soundtrack Pro v2.02 update

    How do I go about getting this update? I have Logic Studio 8 installed. That installs Soundtrack Pro.
    On the download page, the update takes me to the FCP page. There it will only allow a FCP serial, which I don't own. Via software update, it does not show the update either. So now what?
    Sorry, I see the same question was asked in another thread, but it is not appearing in software update for me. (also, the pro application update is not listed)
    http://discussions.apple.com/thread.jspa?threadID=1241277&tstart=0
    Message was edited by: jrentzke

    Non' che' dubio' otri' vezi' - problemi'!
    That's getting close eh?
    I looked through the downloads and Apple has not given a direct link for Logic Studio users!
    That's a problem and it's not right. I would recommend calling the tech support line but right now it's so busy and the call from Italy isn't free. (39) 199 120 800
    I would recommend going to Version Tracker and complaining in the feedback about this problem. I posted the problem in the feedback section for apple. But for now you're just going to have to wait.

  • TS2847 Soundtrack Pro 3.0 output problem

    In Soundtrack Pro 3.0 the meters move but no sound comes out. I've tried removing the AU plug-ins to no avail.  Logic work just fine.  FCP X works fine. Has anyone had this problem and found a solution?

    I am starting to think that what i ask cannot be done! The "in" point marks a cycle region in the project. Even if i make this region active and/or select that region, the export option still bounces the project from the beginning. It can only be done if i use the "trim in point to playhead" option through "clip" menu, because the project is obviously deleted from the beginning to that position.
    I am stuck to a problem that should have a clearer way to do. Or am i missing something?
    Again thanks for the immediate reply.

  • No Soundtrack Pro or ProApp updates for Logic Studio users?

    I attempted to download updates for Soundtrack Pro and the ProApp update but was asked for a Final Cut serial number - - whichm as a Logic Studio owner I do not have. So what's up - - are these updates not signifcant for those who purchased and use Logic Studio? Please advise.

    You shouldn't need to go to the download page, just run software update and it should show up. Do any OS and Pro App updates first, the STP upgrade won't show up there until you do.

  • Soundtrack Pro after fcp update, Bloody useless

    Well the old fcp, worked fine for me quick, speedy, multiple programs open, fcp, soundtrack ect. I now find I cant run Soundtrack without super slow down, or crashing, its impossible to match audio to video now. what have apple done? I basically have nothing to edit with properly, I am so frustrated.
    Anyone else noticed this? its as if its intel code running on the power pc it does not run smooth at all.
    I have a 1.8ghz PowerPc G5 with 2gb ddr Sdram
    Any suggestions? old old fcp/Soundtrack Pro/ was super fast.
    Andy.

    Well after a complete reformat and installing of fcp2 only, it is exactley the same. What a complete and utter waste of time, the old fcp was fast smooth and USEABLE its now stopping me working.
    And to top it off i am now geting this..
    "Soundtrack Pro is dropping audio becasue your computers hard disk cannot deliver all of the audio in time. Try removing some long files or quitting other applications"
    I dont have anything else open and the file only conatins 6 tracks and is less than 1 min in length. Really dont know what to do now. I would take fcp2 off and go back to the old faster one but that means I cant capture 25f. ffs

  • Satellite Pro L300 BIOS update problem

    Hi
    I've an Satellite Pro L300 (PSLBHE).
    I downloaded the new bios file and started the upgrade. A window appeared and showed the old and new bios version (v1.70 -> v2.20). About in 1 min. my laptop screen turned to black but HDD green light flashed and didn't anything about 15 mins. After I pushed the power button and the laptop shutdown. Now if I push the power button nothing happen just blank (black) screen and the HDD flashing light.
    What's the problem? What can I do? Please help me.
    gjon

    Problem is that BIOS update is screwed up now. Obviously BIOS update was interrupted and now the BIOS chip is damaged.
    What you can do now?
    Unfortunately not much. What you need is professional help so I recommend you to contact nearest Toshiba service and ask for help. Sorry.

  • MacBook Pro & Latest Airport Update Problem

    Hi, I just ran the software update and installed the latest Airport update - AirPort Extreme Update 2008-001 for Tiger , and it's conflicting with my system, giving me CPU spikes...everything was fine before I installed the latest update. Is there a way I can go back to what was previously there? How do I install the older Airport files?

    If you don't have a backup you can restore, then the only way to revert to your previous system is the following:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Soundtrack Pro Newbie - Reduce Noise Problem

    Hey Guys,
    This will probably sound like a stupid question but why is reduce noise greyed out when I try to select it? I have imported audio, selected portion of noise, set noise print - but when I select the whole file and try to reduce noise it won't let me.
    Please help
    Thanks
    Tim

    It sounds to me like you haven't isolated the noise properly. There is video on noise reduction in the Apple Tutorial online. You may find the steps there helpful.

  • Soundtrack Pro / Flash problems

    Since installing Soundtrack Pro, I have had problems with Macromedia Flash.
    I installed Soundtrack Pro yesterday and imported MP3 voice-over files for correction & improvement and saved them as .aiff files for import into a Flash .FLA file on my MacBook Pro.
    On importing the files, Flash began to behave strangely - notably, impossible to play the .FLA file to check it (file works OK when published to an .SWF file). Also, Flash refuses to import .WAV files created in Soundtrack Pro.
    However, Flash works OK on a G4, where I have not installed Sountrack.
    I have tried repairing permissions / deleting the Flash preferences file / reinstalling Flash... but these have no effect.
    I would be grateful for any help/suggestions.
    Best regards,
    Garry

    Thanks for the reply. I discovered what the stuttering problem in Soundterack was myself, by running around the Internet doing searches. It turns out that these G5 quad-core Macs have a defect in their optical ports on the back of the case. Light leaks in there and causes problems in Soundtrack. It can be cured by plugging both ends of a toslink cable into the ports, to prevent light from getting in there. One of these little cables only costs a few dollars on Amazon.com. I bought one and plugged it in, and the problem disappeared. Soundtrack now works smoothly.
    It's too bad that programs such as Final Cut 7 and Soundtrack were simply abandoned by Apple, and declared obsolete and irrelevant, because they can still do excellent work. I have another, Intel Mac with the latest (as of last summer) Adobe suite on it, including Adobe Premiere, and yet I can do many things better in Final Cut than I can in Premiere (for one thing, Premiere can only open one project at at time. On my current video project in Final Cut 6, I have three projects open at the same time and am moving clips between them easily). However, now that Adobe has moved to rental versions of their software, my copy of Premiere is also obsolete, and gets no updates or improvements, just like Final Cut 7.
    So I'm making my videos on my obsolete Mac G5 using obsolete software, Final Cut 6 and Soundtrack. I guess I'll remain a defiant holdout for as long as I can.

  • Soundtrack Pro won't start

    I have been using Soundtrack Pro successfully for many months. I tried to load the program today and it won't load past the Soundtrack Pro center banner. I tried trashing soundtrackpro.plist in preferences with no success. After that I created a new user account and under that account, Soundtrack Pro loaded with no problem. Does anyone have a suggestion as to how I can correct my main user account so that Soundtrack Pro will load correctly? Thanks for any assistance.

    Disk Warrier fixed problem

  • Soundtrack Pro crashes on launch.  New OS 10.6.6 update?

    Hey all,
    I just installed Logic Studio yesterday and updated to OS 10.6.6 today. Soundtrack Pro is crashing on start. Are these two issues related? Is anyone else having this problem?
    The error report tells me this:
    Dyld Error Message:
    Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
    Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
    Reason: image not found
    Other details I have:
    My Soundtrack Pro version is3.0.1. The only other audio apps I have are GarageBand '11 and Amadeus Pro.
    I have restarted the computer, and I have repaired disk permissions.
    Thanks in advance,
    David
    Message was edited by: David Sprunger

    Ok, here's an update on my attempt. nolanscott, you state:
    +reinstalling the old ProKit.framework 5.1 from TimeMachine again,+
    +Soundtrack 1.5 opens again...+
    +(HD / System / Library / PrivateFrameworks / ProKit.framework)+
    I'm using Soundtrack Pro 3.0.1, and I don't find a "PrivateFrameworks" folder. But I did dig into a Mac Pro that has Final Cut Studio and did find what this iMac seems to be missing. But wow, not sure exactly how huge this is, but the ProApps directory on the iMac only has:
    --Bundles [directory]
    --Internal Plug-Ins [directory]
    --Logic Studio System ID
    --ProAppsSystemID
    While the Mac Pro which has Final Cut Studio (admittedly no Logic Studio) has much more robust contents!:
    --Bundles [directory]
    --Final Cut Studio System ID
    --Internal Plug-Ins [directory]
    --MIO [directory]
    -- ProAppsSystemID
    -- SharedA [directory]
    So, in the original error message I got, the entire ShareA folder doesn't even exist. The ShareA folder has 3000+ items in it. I've copied it on the corresponding location on the iMac (Volumes/Macintosh HD/Library/Application Support/ProApps/)... and SoundTrack Pro still fails. This time the relevant message is:
    +Dyld Error Message:+
    +Library not loaded: /Library/Frameworks/ProMetadataSupport.framework/Versions/A/ProMetadataSupport+
    +Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro+
    +Reason: image not found+
    Again, comparing the two computers, inside of the iMac to the Mac Pro, the ProMetadataSupport.framework folder is absent from the iMac. I copy that folder over from the Mac Pro and...
    BINGO. We have launch.
    Now, the one thing about doing this is, that I assume I'm not the only Soundtrack Pro'er out there who is having this problem. I don't know what this will do when Apple releases and update for this. Will my fix cause new problems that conflict with Apples? Or did this in fact having nothing to do with updating to 10.6.6 and stem from something else I did? All I did was install Logic Studio, and run System Update. Didn't launch Soundtrack until after I had updated to 10.6.6, so don't know if the problem is connected to that...
    Thanks nolanscott for inspiring my research!
    --David

  • New Soundtrack Pro and Final Cut Pro Updates...

    There's new updates for Soundtrack Pro and Final Cut Pro on Software Update.
    They seem to have fixed the problem I was having with one of my giant old projects. I used to have to open one of the audio projects before my multitrack project would open, but now it opens just fine. So far so good!

    Hi Collings,
    Looks like there are two threads about the recent FCP & STP updates, so I'm posting my findings here, too.
    I just found another thing that appears to be fixed in STP 1.0.2:
    Batch normalize is working:
    I have a bunch of aif files that I want to normalize. I opened one in the waveform editor, applied process->normalize (level=0dB), then selected File->Save as Applescript--this creates an Applescript droplet. Then I can then grab a whole bunch of audio files and drop them all onto this droplet and they all get normalized correctly. This is a huge timesaver for me. Before this update, using this approach to batch-normalize a set of files seemed to deliver unpredictable results, but I just ran a whole set of files through, and they all played back with a peak level of 0dB (and no clipping).
    Here are the other things that I've noticed so far with STP 1.0.2:
    Automation:
    -In STP 1.0.1, Automation was not applied correctly on project sample rates that were not supported by the hardware (e.g. play a 96K project on a laptop built-in 48K audio interface and the automation was late by 2X) -- this is fixed!!! YAY!
    -STP 1.0.1 did not handle long automation ramps across long periods of silence (it would sometimes cause a glitch at the start of the clip right after the automation ramp--there is even a support article about this)--it seems like they fixed this one, too.
    Sample rate switching:
    -I see an option in general preferences to allow me to disable the "Switch hardware sample rate to match document", and with this disabled, I no longer get audible clicks from my audio interface when I switch tabs. Plus, switching tabs seems faster to me.
    Realtime effects and automation in audio file projects:
    -They've added a warning to inform folks about the need to bounce realtime effects and automation to an action--if you are in an audio file project with realtime effects that have not been bounced to an action and you try to save, you get a warning message.
    Has anyone else noticed any other fixes or changes in this update?

  • Soundtrack Pro "unexpected problem" no Start anymore

    Großer Schreck: auf einmal verweigert Soundtrack Pro den Start. Es lädt sich zwar das Programm, aber es gibt keine Arbeitsoberfläche mehr. Wenn man über die Menüleiste ein neues Projekt öffnen möchte erscheint folgende Fehlerbox:
    An Unexpected Problem
    NSRangeException
    Cannot remove an observer <BinModule 0x121f2ab0> for the key path "arrangedObjects" from <NSTreeController 0x12527810> because it is not registered as an observer.
    Auch der Klick auf OK (nach dem Motto, zur Kenntnis genommen..) öffnet keine Arbeitsoberfläche. Neuinstallation brachte nur dasselbe Ergebnis.
    Hinweis: auf der Workstation befindet sich auch Final Cut Pro X. Diese Woche wurde auf 10.04 upgedatet. Ob es daran liegt...?
    Hoffentlich hat jemand eine Idee... Über Soundtrack Pro wird eine wöchentliche Radiosendung geschnitten und produziert... Wir sind total aufgeschmissen, wenn wir das Programm nicht mehr ans Laufen bekommen..
    Danke!!
    Jürgen
    www.reiseradio.org
    Summary in english:
    You see error message above? That's all, what I see, when I want to start Soundtrack Pro 3 since today... You won't get any workspace, but just the error message. Even re-installation does not solve the problem. On the Mac Pro, there is also an installation of Final Cut Pro X, which was updated this week to version 10.04. Might this be the source for all problems...? Anybody any idea? Hopefully, because we really need Soundtrack Pro for an project. Thanks!!

    Vielen Dank!! Ich hatte zwar MOTION gar nicht auf dem Computer. Habe es jetzt nachinstalliert. Nach dem Öffnen wurde es zwar irgendwie automatisch gecrasht... aber zum Glück liess sich danach das ebenfalls neu installierte Soundtrack Pro wieder öffnen... Hoffentlich bleibt es so...
    Uff... Sendung heute Abend gerettet...

  • Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

    Hey,
    Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes.  Also, this happens when I try to work with audio files in the file editor.  I have Leopard and am using Logic Studio 8.  Any insight would be much appreciated. Thanks
    Matt

    Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro.  So I could go no further in my perverse science experiment. 
    It also appeared that I could only import an aif but not a wav? 
    I gave up on STPro and did what I needed to do in Logic, which I use regularly.    
    Thank you for folowing up on this. 
    PS.  I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect.  It appears that the new version (3.0.1) does not allow you to do this anymore?  You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?  
    Im such a newbie at STPro that I am probably not using it right? 

  • Problem sending to soundtrack pro

    I am using FCP 5.1.4 and in my timeline I have a clip with bad audio that i want to clean up in soundtrack. I right-click the file and go to "send to.." "soundtrack pro audio file" is greyed out, but the multitrack option is not, so i tried the multitrack option. In soundtrack i cannot set noise print or anything in the multitrack file. If i disconnect the right and left channels I can send them one at a time to soundtrack and clean them up, but that is too time consuming after a while. How can I send a stereo file, clean up the noise, and have it appear in FCP? I know i have done it before, but for some reason it will not work now.
    Thank you for your help.
    Message was edited by: alterpower

    Okay... so now it's not working again.
    This was after getting the message:
    Unable to render file
    when I tried to normalize.
    Then STP froze up on me and I had to force quit.
    Resent from FCP, then tried to double click on a track to open it up, and STP crashed on me.
    This is about the 5th crash I've had this evening in STP.
    Not sure what the problem is... maybe I need to re-install the OS. But that's not going to happen tonight.
    Would be nice to know if others are having this problem or if it is just me?

Maybe you are looking for