Source bin not found terminates the FM L_TO_CREATE_2_STEP_PICKING for TRs

I am trying to create a batch processing version of LT0E to process groups for the first TO. However, when I test this FM I find that any error in source bin determination terminates the FM on that line even though there could be other subsequent lines which could be processed.
Because we have TRs which do not have stock in the search area this can happen.
I would appreciate any advice on how to control the FM so that it continues processing subsequent lines after this type of error is encountered

Jeff, did you find a work around for this? I am having the same issue.

Similar Messages

Error 1311 Source file not found

Hi.
I have tried to repair my Adobe Acrobat 9.0 because it's not working. I got Error 1311 source file not found.
then the following path c\ProgramFiles(x86)\Adobe\Acrobat9.0\Setup\Files\{AC76BA86-1033-F400-BA7E-000000000004}\D ata1.cab
Verify that the file still exists and that you can access it.
What do I do now? I can't open any PDF files from the net.
Also, I have rec'd the following: Unable to find Adobe PDF resource files.
C\ProgramData\Adobe\AdobePDF\Settings\*.joboptions Then it said you must have administrator privileges to install these files. Contact your local administrator. How do I do this? I am the administrator on my home computer!

Thank you Pat.
A couple of things...
First off I am disabled and sometimes a little slow on the uptake.
Subsequent to my first query, I was successful in downloading the Adobe
Reader XI. However it only allows me to view PDF's that reside on my
computer. If however I want to look at any docs on the web or that people
send me via e-mail I cannot see them They flash for a moment, like a tease
and then say there was a catastrophic crash with not much after that.
If I follow your instructions below, I presume that I will be deleting the
A R X1 as well and as it was very very difficult to get it is the first
place, would you be able to help me with a reinstall?
I think what happened is that my grandson did a "cleanup" on my computer
and deleted only parts of programs...and thus the part that are missing
will not allow for the subsequent updates.
So...thank you for your patience and confirm that I should uninstall and
using the cleaner and then reinstall using the links you provided?
Thank you so much!
Sass
On Wed, Oct 29, 2014 at 1:40 AM, Pat Willener <[email protected]>

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I reinstalled my OS as I do every year or so. when I install CS4 I do not have Premiere Pro Adobe Premiere Pro Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists

Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists and that you can access it.

And what exactly? You have not provided any system info or other details.
Mylenium

Error 1311....source file not found Adobe Acrobat 8.2.0

I have Vista. I keep getting installing boxes and error messages:
Error 1311. Source file not found: C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data 1.cab.
Verify file exists and that you can access it.
I cannot find that file in the set up, so it's obviously missing. I have tried uninstalling, but still get the error messages, even though the Reader is working on my PC...it's just so annoying as I am constantly cancelling installation and cancellation boxes. Can I install this file?
Thanks!
Message was edited by: Woodlandia36

"I tried to uninstall Adobe Creative Master Suite CS3. It hasn't uninstalled completely and has left traces of it still being on my system."
You could always "wipe the slate" clean.
Any and all Adobe folders would be manually deleted. (Shift+Delete to remove them from the hard drive, not send to the recycle bin)
Click Start and Run. Type regedit and hit enter.
Under HKEY_LOCAL_MACHINE\SOFTWARE delete all Adobe Folders (not just the keys, the whole folders - click once and hit Delete)
Under HKEY_CURRENT_USER\SOFTWARE do the same
Under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Change the value for the AllocateCDRoms entry to 0. (Right click and select Modify - type 0 and hit enter)
Exit the Registry Editor.
Reboot
You should not see this error anymore
Note: I only recommend this because you indicate that you have already attempted removing the entire creative suite. This will render it unfunctional if you do it. If you aren't comfortable with editing your registry, disregard these steps.

Error 1311 Source file not found? Plus another error. I need help bad!

Error 1311. Source file not found. S:\Documents and Settings\Owner\Local Settings\Temparary Internet Files\content.IE5\45UJKXYZ\ja150000[ 1 ].cab. Verify that the file exists and that you can access it.
That appears when trying to install Java 5 update. What can I do to fix that?
This is another error I've got.
hs_err_pid424 error
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x64DAD49
Function=Java_sun_awt_windows_WToolkit_printWindowsVersion+0x1CB9
Library=C:\Program Files\Java\j2re1.4.2_08\bin\awt.dll
What's those mean and how can I fix them? Plus after installing J2re1.4.2_08 I get a fuzzy looking screen and lines look doubled or outlined some.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

EIS : Data source name not found and no default driver specified

Hi
I have Oracle Essbase installed in a x86_64 machine.
I have configured odbc 64 bits how is indicated in SQL Interface Guide, but when try to create catalog the message "ODBC Error [DataDirect][ODBC lib] Data source name not found and no default driver specified"
The is.sh script set these environment variables:
#!/usr/bin/ksh
export ISHOME=/u01/app/oracle/Middleware/EPMSystem11R1/products/Essbase/eis/server
export EPM_ORACLE_HOME=/u01/app/oracle/Middleware/EPMSystem11R1
export HYPERION_HOME=/u01/app/oracle/Middleware/EPMSystem11R1
export ARBORPATH=$ISHOME
export ESSBASEPATH=$ISHOME
export ISLOADINFO=$ISHOME/loadinfo
export ISODBC=$EPM_ORACLE_HOME/common/ODBC-64/Merant/6.0
export ODBCINI=$EPM_ORACLE_HOME/common/ODBC-64/Merant/6.0/odbc.ini
export TEMP=/tmp
case `uname` in
AIX)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LIBPATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LIBPATH;;
HP-UX)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export SHLIB_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$SHLIB_PATH;;
Linux)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LD_LIBRARY_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LD_LIBRARY_PATH ;;
SunOS)
export JAVA_HOME=$EPM_ORACLE_HOME/../jdk160_11
export LD_LIBRARY_PATH=$ISHOME/esslib:$ISHOME/islib:$ISODBC/lib:$JAVA_HOME/lib:$LD_LIBRARY_PATH;;
echo `uname -a`;;
esac
export CLASSPATH=$EPM_ORACLE_HOME/common/jlib/11.1.2.0/epm_j2se.jar
export PATH=$JAVA_HOME/bin:$ISHOME/bin:$PATH

Hi Andres, Can you please tell me how you resolved this issue? I'm getting the same error when I start EIS as windows services, but when I start from console it works fine.
Updated................Issue resolved!!!
OK. Upon researching other windows forums found that I had to add System DSN to ODBC administrator under "C:\Windows\*SysWOW64*\odbcad32.exe". This is because the server is a windows 64-bit machine.
Thanks
Edited by: U12345 on Dec 14, 2010 5:58 AM
Edited by: U12345 on Dec 14, 2010 6:01 AM

[unixODBC][Driver Manager]Data source name not found, and no default driver

Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
              The database that provides the data to this document has generated an error.
Cause
              Details about the error are provided in the section of the message indicated
              +by the field code: .
              Contact your BusinessObjects administrator with the error message
Action
              information or consult the documentation provided by the supplier of the
              database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
Cheers

Hi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
    export DEFAULT_ODBCFILE
    +ODBC_HOME="$odbc"+
    export ODBC_HOME
also
# setup the mysql env variables
    if [ -d "$BOBJEDIR"/mysql ]; then
            # mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
            MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
            export MYSQL_UNIX_PORT
    We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
      the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
      if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
        ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
      fi
    fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
    . "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
    if [ x`echo $- | grep "u"` != "x" ]; then
        set +u
        U_FLAG=1
    fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
    if [ -f "$setup/boconfig.cfg" ]; then
    HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
        export HKEY_LOCAL_MACHINE
    fi
    BOBJE_ENV_SOURCED="true"
    export BOBJE_ENV_SOURCED
    BOBJEVERSION="12.0"
    export BOBJEVERSION
    LANGWAS="$LANG"
    unset LANG
    LC_ALLWAS="$LC_ALL"
    unset LC_ALL
    ulimit -Sn `ulimit -Hn` # max file descriptors
    ulimit -S -c `ulimit -H -c` # max core file size
    ulimit -S -d `ulimit -H -d` # max data segment size
    ulimit -S -f `ulimit -H -f` # max file size
    ulimit -S -s `ulimit -H -s` # max stack
    ulimit -S -t `ulimit -H -t` # max CPU time
    LANG="$LANGWAS"; export LANG
    unset LANGWAS
    LC_ALL="$LC_ALLWAS"; export LC_ALL
    unset LC_ALLWAS
    case X"$SOFTWARE" in
        XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
        XAIX)   SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
        XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
        XHP-UX)
                SOFTWARELC="hpux";
                if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
                        SHAREDLIBSUFFIX=".so";
                else
                        SHAREDLIBSUFFIX=".sl";
                fi
                CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
                CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
    esac
    export SOFTWAREPATH
    export SOFTWARE
    export SHAREDLIBSUFFIX
    export CB1LIBSUFFIX
    export CB1SYMLINKLIBSUFFIX
    if [ "$SOFTWAREPATH" = "" ]; then
        echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
        exit 1
    fi
    if [ -d "$BOBJEDIR"/jdk ]; then
      JAVA_HOME="$jdk"
      export JAVA_HOME
    fi
      JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
      if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
        JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
      fi
      export JAVA_OPTS
    if [ -d "$Dashboard_Analytics_120" ]; then
        AAHOME="$Dashboard_Analytics_120"
        export AAHOME
    fi
    WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
    export WCSDIR
    WCSBINDIR="$bin/"
    export WCSBINDIR
    WCSCOMPONENTDIR="$components/"
    export WCSCOMPONENTDIR
    BINDIR="$enterprise120/$SOFTWAREPATH/"
    export BINDIR
    LIBDIR="$enterprise120/$SOFTWAREPATH/"
    export LIBDIR
    PLUGINDIR="$enterprise120/packages/"
    export PLUGINDIR
    PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
    export PLUGINDIST
    LOGDIR="$append the new valuelogging/"
    export LOGDIR
    if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
        BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
    else
        BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
    fi
    export BOE_LOGGER_ENVIRONMENT
    SCRIPTDIR="$enterprise120/generic/"
    export SCRIPTDIR
    JAVASCRIPTDIR="$setup/jscripts/"
    export JAVASCRIPTDIR
    MACHINENAME=`uname -n`
    export MACHINENAME
    removeUTF8SpecificsForKorean
    STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
    export STRIPPEDMACHINENAME
    if [ x"$BOBJEUSERNAME" = x ]; then
      BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
      export BOBJEUSERNAME
    fi
    restoreUTF8SpecificsForKorean
    DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
    export DEFAULT_REGFILE
    REGFILE="$BOBJEDIR"data/.bobj
    export REGFILE
    BOE_REGISTRYHOME="$REGFILE/registry"
    export BOE_REGISTRYHOME
    DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
    export DEFAULT_ODBCFILE
    ODBC_HOME="$odbc"
    export ODBC_HOME
the PID file location
    PIDDIR="$BOBJEDIR"serverpids
    export PIDDIR
    SQLRULEDIRECTORY="$LIBDIR"
    export SQLRULEDIRECTORY
    PATH="$BINDIR:$crpe/xvfb:$PATH"
    export PATH
    CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
    export CRPEPATH
    MWHOME="$mw/"
    export MWHOME
    BOBJEXVFBPATH="$xvfb/"
    export BOBJEXVFBPATH
    MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
    export MWUSER_DIRECTORY
    MWRT_MODE="professional"
    export MWRT_MODE
    MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
      MW_XVFB_EXE         = Name of the Xvfb exe.
                            Default is 'Xvfb'.
      MW_XVFB_DAEMON      = Name of the XvfbDaemon exe.
                            Default is 'XvfbDaemon'.
      MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
                            Default is 5222.
      MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
                            Default is Local host.
      MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
                            Default is '5'.
      MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
                            Default is '1'.
      MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
                            Default is 'SecurityProfile'.
      MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
                            Default is undefined.
      MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
                            Default is undefined.
      MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
    export MWREGISTRY
    MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
    export MWCORE_PRIVATE_DATA
    if [ -f "$MWHOME"setmwruntime ]; then
        . "$MWHOME"setmwruntime
    fi
    MWNT_OLE_DOCS=true
    export MWNT_OLE_DOCS
    MWPRINTER_DPI=600
    export MWPRINTER_DPI
    MWVISUAL_CLASS="TrueColor"
    export MWVISUAL_CLASS
    if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
        MWTHREAD_STACK="200000"
    else
        MWTHREAD_STACK="FA000"
    fi
    export MWTHREAD_STACK
    MWFONT_DIR_PATH="$fonts/"
    export MWFONT_DIR_PATH
    MW_XVFB_DAEMON_FONT="$misc/"
    export MW_XVFB_DAEMON_FONT
    XAUTHORITY="$xvfb/.Xauthority"
    export XAUTHORITY
    MWDEBUG_LEVEL=0
    export MWDEBUG_LEVEL
    MWINVISIBLE_DISPLAY=1
    export MWINVISIBLE_DISPLAY
   MWNO_SIGCHLD_IGNORE=1
   export MWNO_SIGCHLD_IGNORE
   MWLOOK=motif
   export MWLOOK
        MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
        export MW_XVFB_DAEMON_PROFILE
        MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
        export MW_XVFB_DAEMON_IGNORE_DISPLAY
        if [ "$SOFTWARE" = "HP-UX" ]; then
            MW_XVFB_DAEMON_XVFB=10
        else
            MW_XVFB_DAEMON_XVFB=5
        fi
        export MW_XVFB_DAEMON_XVFB
        MWNO_FILE_LOCKING=true
        export MWNO_FILE_LOCKING
        MWNO_SIGNAL_CATCHING=true
        export MWNO_SIGNAL_CATCHING
    RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
    export RASHOME
    LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
    if [ "$SOFTWARE" = "AIX" ]; then
        LIBPATH="$LIBRARYPATH:$LIBPATH"
        export LIBPATH
        if [ x"$MALLOCMULTIHEAP" = x ]; then
            CRConfig env variable for DCP
            MALLOCMULTIHEAP="considersize"
            export MALLOCMULTIHEAP
        fi
        RT_GRQ=ON
        export RT_GRQ
        LDR_CNTRL=IGNOREUNLOAD
        export LDR_CNTRL
        AIXTHREAD_GUARDPAGES=1
        export AIXTHREAD_GUARDPAGES
        LANGWAS="$LANG"
        unset LANG
        LC_ALLWAS="$LC_ALL"
        unset LC_ALL
        ulimit -S -m `ulimit -H -m` # max memory
        LANG="$LANGWAS"; export LANG
        unset LANGWAS
        LC_ALL="$LC_ALLWAS"; export LC_ALL
        unset LC_ALLWAS
        AIXTHREAD_SCOPE="S"
        export AIXTHREAD_SCOPE
        Version=`uname -v`
        Release=`uname -r`
        if [ "$Version" -gt 4 ]; then
            CORE_NAMING=ON
            export CORE_NAMING
        fi
        AIXTHREAD_MUTEX_DEBUG=OFF
        export AIXTHREAD_MUTEX_DEBUG
        AIXTHREAD_COND_DEBUG=OFF
        export AIXTHREAD_COND_DEBUG
        AIXTHREAD_RWLOCK_DEBUG=OFF
        export AIXTHREAD_RWLOCK_DEBUG
    elif [ "$SOFTWARE" = "HP-UX" ]; then
        if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
            SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
        else
            SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
        fi
        export SHLIB_PATH
        MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
        if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
            if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
              BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
              export BOE120_HP_MEMWIN_ID
            fi
            if [[ -x "/usr/bin/setmemwindow" ]]; then
                if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
                    CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
                fi
            fi
            export CE_CMDLINE_PREFIX
        fi
        export MARENA_OPTS=1:8
        export MCACHE_OPTS=100:8:0
    elif [ "$SOFTWARE" = "Linux" ]; then
        LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
        export LD_LIBRARY_PATH
    else
        LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
        export LD_LIBRARY_PATH
    fi
    CRCONFIGFILE="$java/CRConfig.xml"
    if [ -f "$CRCONFIGFILE" ]; then
      CRConfig11="$CRCONFIGFILE"
      export CRConfig11
    fi
    if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
      MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
      if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
        ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
      fi
    fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
    if [ x"$MW_TMPDIR" = x ]; then
      if [ ! -d "$BOBJEDIR"/tmp ]; then
        mkdir -p "$BOBJEDIR"/tmp
      fi
      MW_TMPDIR="$BOBJEDIR"/tmp
      export MW_TMPDIR
    fi
Comment this out to turn off custom Solaris memory allocator
    if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
        LD_PRELOAD="libhoard.so.1"
        export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
        LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
        export LD_LIBRARY_PATH_64
    fi
setup the mysql env variables
    if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
            MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
            export MYSQL_UNIX_PORT
    fi
call env.sh from sub-directories (presumably from add-on installs)
    for dir in "${BOBJEDIR?}/setup"/*
    do
        if [ -r "${dir?}/env.sh" ]; then
            . "${dir?}/env.sh"
        fi
    done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
    if [ "$U_FLAG" = 1 ]; then
        set -u
    fi
fi

Why do I get this error message /opt/firefox/run-mozilla.sh: 399: /opt/firefox/firefox-bin: not found

kubuntu 10.04
firefox 10.0.2
I downloaded and installed firefox 10.0.2 but when I...
1. click the desktop icon nothing happens.
2. use terminal mode and type firefox I get the following error message:
/opt/firefox/run-mozilla.sh: 399: /opt/firefox/firefox-bin: not found
How do I fix this?

In short, I used kpackagekit to uninstall firefox. Then used synaptic to uninstall firefox. After that I manually scanned the computer for residual DIRs. In the end, I noticed that I still had 3 DIRs containing firefox: /opt/firefox, /usr/lib/firefox-10.0.1, /usr/lib64/firefox-10.0.1
So removing firefox didn't work as expected.
As it turns out, the copy of firefox residing in /opt/firefox is v3.5.3, but I have a current version in /usr/lib and /usrlib64. For some reason the, new install didn't replace the copy in /opt/firefox and the /usr/bin scripts firefox and run-mozilla.sh point to /opt/firefox.
So when I use terminal mode and type firefox I get the cited error message. When I use my desktop icon it hangs.
My remedy for this was to due the following:
1. track down the location of the desktop icon: /usr/share/applications/firefox.desktop
2. edit the file: sudo pico /usr/share/applications/firefox.desktop
3. modify entry to: EXEC=/usr/lib/firefox-10.0.1 /firefox.sh u% ( save and exit)
4. modify terminal command: firefox
5. track down the location of the firefox command: /usr/bin/firefox and /usr/bin/
firefox.ubuntu
6. remove symbolic link: rm /usr/bin/firefox
7. remove symbolic link: rm /usr/bin/firefox
8. create new symbolic link: ln -sT /usr/lib/firefox-10.0.1/firefox.sh firefox
9. create new symbolic link: ln -sT /usr/lib/firefox-10.0.1/firefox.sh firefox.ubuntu
Everything works now as it should.
I believe the cause of this problem was related to the fact that the mozilla-team made a change to the location of their upgrade/update libraries which affected the entries in the file: /etc/apt/sources.list. When the ppa library location changed, my kubuntu version 10.04 didn't make this change and residual copies of firefox were left behind and DIRs /usr/bin and /opt/firefox were not modified.
Perhaps my experience will help others that tread this path.
Maybe somebody can explain to me why we need 3 DIRs for firefox: /opt/fire ; /usr/lib ; /usr/lib64

Tomcat 6/Java/mySql: Data source name not found

I installed the following on my laptop which has a Windows 2000 operating system:
- ODBC Connector for mySql
- the MySql Connector/J for Java
ODBC
In the Data Source ODBC Administrator of the Control panel I added a Data Source name for the mySql Database:
Data Source Name: mysql
Server: localhost
Database: mysql
When I click the Test button I get the message: Success; Connection was made!
TOMCAT
C:\apache-tomcat-6.0.18
I copied mysql-connector-java-5.0.8-bin.jar into:
- the lib folder
- the lib folder under webapps>WEB-INF\testapp
I added the above paths to CLASSPATH
TOMCAT SERVER.XML
In the server.xml file under the CONF folder I entered
<Context path="/testapp" docBase="testapp" debug="0"
reloadable="true" crossContext="true">
<Resource name="jdbc/mysql"
auth="Container"
type="javax.sql.DataSource"
description="The connection pool will be bound into JNDI with the name
java:/comp/env/jdbc/MySQLDB">
</Resource>
<ResourceParams name="jdbc/mysql">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>10</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>5</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
<parameter>
<name>username</name>
<value>root</value>
</parameter>
<parameter>
<name>password</name>
<value>test</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost/mysql</value>
</parameter>
</ResourceParams>
</Context>
However, when I try to run a java servlet, I am getting the following error:
SqlException: Could not connect to database
[ODBC Driver Manager] Data source name not found and no default driver specified
Class.forName("com.mysql.jdbc.Driver").newInstance();
conn = DriverManager.getConnection(“jdbc:mysql://localhost/mysql”, strUserId, strPassword);
MySql is actually installed on c:\Program Files\MySql\Mysql 5.0
What am I missing? How can I get the mySql connection to work?
Thanks,
Robin

You seem to be specifying JDBC driver while you are trying to connect to your database using ODBC,
RobinHR wrote:
<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
and ,
RobinHR wrote:
Class.forName("com.mysql.jdbc.Driver").newInstance();
conn = DriverManager.getConnection(jdbc:mysql://localhost/mysql, strUserId, strPassword);
*********************You would be using "sun.jdbc.jdbcodbc.Driver" rather!
Refer MySQL sample examples/documentation on how to connect to your database using ODBC
And this on how to create a DSN
Edited by: anamupota on Jan 16, 2009 8:27 AM

I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

Why do they even offer a free trial version of livecycle es4, when its obviously not free??????
i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
a messsage pops up saying Error 13:11 Source file not found verify file exsist. what does that even mean?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Error Configuration File bc4j.xcfg is not found in the classpath

I am new to JDeveloper and ADF, and am suffering through the steep learning curve. This story may prove useful to someone, someday.
I just finished resolving a “bc4j.xcfg is not found in the classpath” error and it added another level of understanding to how things are glued together.
There is a back story. I had made a first pass at creating a test application. When I was done I started “enhancing” the application. One of the changes was to add a column to a view in the database. Try as I might I could not get that change propagated to the business component. This is still on my to-figure-out list. In frustration I dropped the model and recreated it from the database tables and views. Testing it with the “AppModule” in the model project I could see the view with the new column. However, when I went to run one of my old jspx pages, I now got the dreaded “bc4j.xcfg is not found in the classpath” – and this was for a page that was not using my updated view. As the military expression goes, “Whiskey Tango Foxtrot”.
It is now working again, and here is what I found.
I noticed in the error message that it could not find “/cloudapp1/common/bc4j.xcfg”. When I searched for the file I found it in /cloudapp1/model/common/bc4j.xcfg. I went to the project properties for the model project and on the “Project Source Paths” node I saw at the bottom of the page Default Package: cloudapp1.model. Ah Ha! That is where the /cloudapp1/model structure came from. Then I remembered that the first time through I had changed the default package to just cloudapp1. Part of my experimenting with the product. When I quickly rebuilt the model project I did not do that.
Next I found the DataBindings.cpx that one note alluded to. It is in the ViewController project. There I found an “OC4JDataControl” section. In there was and entry Package=”cloudapp1”. This was the original package name. When I rebuilt the model, this was not updated. Anyway, I changed it to Package=”cloudapp1.model”. [ Insight: When you first build an app it can make some good guesses about what is needed, but when you start adding and dropping projects it is much harder to guess how they are glued together.]
Raising a cup of coffee in triumph I re-ran the test page.
Dang! Still a bc4j.xcfg not found in the classpath – but this time the path mentioned matched the path where I knew the file to be.
I am nothing if not stubborn. I knew the problem just had to be in the ViewController project, because the AppModule in the model project worked. So, I started going through all of the project properties. I finally came across something called “Dependencies” that had big ugly red circles with an x in them. Ah ha. This is what tells the ViewController what other projects (like the business model project) this ViewController is dependent on. Although the editing process it not obvious I eventually pointed it to the new model project. [Deepening insight.]
When I re-ran the test page it worked! Coffee finished. Story with a happy ending.
Summary:
1. Make sure the package name in the ViewController DataBindings.cpx matches the one in your model project.
2. Make sure the ViewController Dependencies entry points to the model project.

Thought I'd add a little bit more to this post I found helpful.
I'm creating an application which uses other application ViewController projects deployed as library .jar files. If your .jar ViewController project deployment profiles don't have your Model project as a dependency, you will get the .bc4j error as well.
This can be confusing when the ViewController pages function correctly when run within their own application context, but somehow lose their bc4j when deployed as a .jar.
Hope that helps someone down the road.

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

SOLVED: installing firefox-3.6.28 on 64-bit debian multiarch - "firefox-bin: not found"

summary: I must run a firefox-3.x to telework, and I run debian at home. I previously had firefox-3.6.28 installed and running on an up-to-date debian, but mistakenly destroyed that install. I have reinstalled the OS, and reinstalled firefox-3.6.28, but it will not run:
<pre>
$ /usr/local/share/firefox-3.6.28/firefox -no-remote -ProfileManager &
> [1] 8297
> $ /usr/local/share/firefox-3.6.28/run-mozilla.sh: 143: exec: /usr/local/share/firefox-3.6.28/firefox-bin: not found
</pre>
details:
As detailed in a previous question
https://support.mozilla.org/en-US/questions/931873
my workplace forces me to run a firefox-3.x in order to install a plugin (F5NAP) that provides remote access. (While the question above suggests that a firefox-8.x would also be an option, the latter is not in fact compatible with my workplace's servers' configuration.) I previously was able to do this first ~2 years ago, as indicated in the question above, on a 64-bit PC with debian=wheezy/sid (distro=LMDE==Linux Mint Debian Edition).
About a month ago, that older PC developed severe problems, so I began to setup a newer PC, which must also run the VPN, and therefore firefox-3.6.28+F5NAP. The new box is running
<pre>
$ uname -a
Linux box 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64 GNU/Linux
$ lsb_release -a
No LSB modules are available.
Distributor ID: LinuxMint
Description: LMDE Cinnamon Edition
Release: 1
Codename: debian
$ cat /etc/debian_version
jessie/sid
</pre>
Note that the new box is also 64-bit, but (unlike the old box) is running the latest debian with multiarch support
https://wiki.debian.org/Multiarch
(whereas the old box used package=ia32-libs). I was able to install firefox-3.6.28+F5NAP on the new box as detailed here
http://forums.linuxmint.com/viewtopic.php?f=190&t=164522
Unfortunately I later misconfigured LVM, forcing me to reinstall everything :-( I have LMDE and most applications installed (from APT, with packages currently up-to-date) and everything appears to work (particularly the firefox-28.0 which I am using to ask this question). However this time I'm getting a very different error when I run firefox-3.6.28.
I'm installing and running firefox-3.6.28 with the following bash scriptlet (which is how I installed it previously):
<pre>
FF_VERSION='3.6.28'
LINUX_VERSION='i686' # since there is no 64-bit build of this version of firefox
EXEC_FN='firefox'
LANG='en-US'
FF_WITH_VERSION="firefox-${FF_VERSION}"
URI="https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/${FF_VERSION}/linux-${LINUX_VERSION}/${LANG}/${FF_WITH_VERSION}.tar.bz2"
BUILD_DIR="/tmp/${FF_WITH_VERSION}"
UNZIP_DIR="${BUILD_DIR}/firefox"
INSTALL_ROOT='/usr/local/share'
INSTALL_OWN='root:staff' # like peers on new LMDE, not 'root:root'
INSTALL_DIR="${INSTALL_ROOT}/${FF_WITH_VERSION}"
EXEC_FP="${INSTALL_DIR}/${EXEC_FN}"
EXEC_ARGS='-no-remote -ProfileManager'
# `tar j` == bzip2
for CMD in \
"mkdir -p ${BUILD_DIR}" \
"sudo mkdir -p ${INSTALL_ROOT}" \
"pushd ${BUILD_DIR}" \
"wget -O - ${URI} | tar xfj -" \
"find | wc -l" \
"popd" \
"sudo mv ${UNZIP_DIR} ${INSTALL_DIR}" \
"sudo chown -R ${INSTALL_OWN} ${INSTALL_DIR}/" \
"du -hs ${INSTALL_DIR}/" \
"ls -alh ${EXEC_FP}" \
"${EXEC_FP} ${EXEC_ARGS} &" \
; do
echo -e "$ ${CMD}"
eval "${CMD}"
done
</pre>
firefox-3.6.28 appears to install correctly:
<pre>
$ lsalh /usr/local/share/firefox-3.6.28/
total 20M
drwxr-xr-x 13 root staff 4.0K May 1 18:30 .
drwxrwsr-x 9 root staff 4.0K May 1 18:04 ..
-rw-r--r-- 1 root staff 2.1K Mar 6 2012 application.ini
-rw-r--r-- 1 root staff 0 Mar 6 2012 .autoreg
-rw-r--r-- 1 root staff 5.1K Mar 6 2012 blocklist.xml
-rw-r--r-- 1 root staff 232 Mar 6 2012 browserconfig.properties
drwxr-xr-x 3 root staff 4.0K Mar 6 2012 chrome
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 components
-rwxr-xr-x 1 root staff 51K Mar 6 2012 crashreporter
-rw-r--r-- 1 root staff 3.8K Mar 6 2012 crashreporter.ini
-rw-r--r-- 1 root staff 583 Mar 6 2012 crashreporter-override.ini
drwxr-xr-x 5 root staff 4.0K Mar 6 2012 defaults
-rw-r--r-- 1 root staff 136 Mar 6 2012 dependentlibs.list
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 dictionaries
drwxr-xr-x 3 root staff 4.0K Mar 6 2012 extensions
-rwxr-xr-x 1 root staff 3.9K Mar 6 2012 firefox
-rwxr-xr-x 1 root staff 44K Mar 6 2012 firefox-bin
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 greprefs
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 icons
-rw-r--r-- 1 root staff 478 Mar 6 2012 libfreebl3.chk
-rwxr-xr-x 1 root staff 326K Mar 6 2012 libfreebl3.so
-rwxr-xr-x 1 root staff 1.1M Mar 6 2012 libmozjs.so
-rwxr-xr-x 1 root staff 201K Mar 6 2012 libnspr4.so
-rwxr-xr-x 1 root staff 853K Mar 6 2012 libnss3.so
-rwxr-xr-x 1 root staff 390K Mar 6 2012 libnssckbi.so
-rw-r--r-- 1 root staff 478 Mar 6 2012 libnssdbm3.chk
-rwxr-xr-x 1 root staff 121K Mar 6 2012 libnssdbm3.so
-rwxr-xr-x 1 root staff 81K Mar 6 2012 libnssutil3.so
-rwxr-xr-x 1 root staff 14K Mar 6 2012 libplc4.so
-rwxr-xr-x 1 root staff 8.8K Mar 6 2012 libplds4.so
-rwxr-xr-x 1 root staff 123K Mar 6 2012 libsmime3.so
-rw-r--r-- 1 root staff 478 Mar 6 2012 libsoftokn3.chk
-rwxr-xr-x 1 root staff 194K Mar 6 2012 libsoftokn3.so
-rwxr-xr-x 1 root staff 501K Mar 6 2012 libsqlite3.so
-rwxr-xr-x 1 root staff 169K Mar 6 2012 libssl3.so
-rwxr-xr-x 1 root staff 12K Mar 6 2012 libxpcom.so
-rwxr-xr-x 1 root staff 16M Mar 6 2012 libxul.so
-rw-r--r-- 1 root staff 31K Mar 6 2012 LICENSE
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 modules
-rwxr-xr-x 1 root staff 11K Mar 6 2012 mozilla-xremote-client
-rw-r--r-- 1 root staff 137 Mar 6 2012 platform.ini
-rwxr-xr-x 1 root staff 3.7K Mar 6 2012 plugin-container
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 plugins
-rw-r--r-- 1 root staff 177 Mar 6 2012 README.txt
-rw-r--r-- 1 root staff 16K Mar 6 2012 removed-files
drwxr-xr-x 6 root staff 4.0K Mar 6 2012 res
-rwxr-xr-x 1 root staff 9.8K Mar 6 2012 run-mozilla.sh
drwxr-xr-x 2 root staff 4.0K Mar 6 2012 searchplugins
-rw-r--r-- 1 root staff 825 Mar 6 2012 Throbber-small.gif
-rw-r--r-- 1 root staff 6 Mar 6 2012 update.locale
-rwxr-xr-x 1 root staff 71K Mar 6 2012 updater
-rw-r--r-- 1 root staff 143 Mar 6 2012 updater.ini
</pre>
but it does not run:
<pre>
$ /usr/local/share/firefox-3.6.28/firefox -no-remote -ProfileManager &
> [1] 8297
> $ /usr/local/share/firefox-3.6.28/run-mozilla.sh: 143: exec: /usr/local/share/firefox-3.6.28/firefox-bin: not found
</pre>
But as noted above, /usr/local/share/firefox-3.6.28/firefox-bin clearly exists, and is in the same directory as /usr/local/share/firefox-3.6.28/run-mozilla.sh , and both have the same permissions. Am I missing something?
If not: how to fix, or further debug, this problem?
Your prompt assistance is appreciated, since I can't telework until I get this fixed :-(

For the solution's full description, see this post to debian-user
https://lists.debian.org/debian-user/2014/05/msg00243.html
(in a quite illuminating thread starting here
https://lists.debian.org/debian-user/2014/05/msg00126.html
) But the solution was mostly
<pre>
me@it ~ $ ldd /usr/local/share/firefox-3.6.28/firefox-bin
not a dynamic executable
# libc6:i386, dependencies, and recommended from `aptitude -s`
me@it ~ $ sudo aptitude install libc6:i386 gcc-4.8-base:i386 libc6-i686:i386 libgcc1:i386
The following NEW packages will be installed:
gcc-4.8-base:i386 libc6:i386 libc6-i686:i386 libgcc1:i386
0 packages upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Setting up gcc-4.8-base:i386 (4.8.2-1) ...
Setting up libc6:i386 (2.17-97) ...
Setting up libgcc1:i386 (1:4.8.2-1) ...
Setting up libc6-i686:i386 (2.17-97) ...
Processing triggers for libc-bin ...
me@it ~ $ ldd /usr/local/share/firefox-3.6.28/firefox-bin
linux-gate.so.1 (0xf7775000)
libpthread.so.0 => /lib/i386-linux-gnu/i686/cmov/libpthread.so.0 (0xf7740000)
libxul.so => not found
libmozjs.so => not found
libxpcom.so => not found
libplds4.so => not found
libplc4.so => not found
libnspr4.so => not found
libdl.so.2 => /lib/i386-linux-gnu/i686/cmov/libdl.so.2 (0xf7739000)
libgtk-x11-2.0.so.0 => not found
libatk-1.0.so.0 => not found
libgdk-x11-2.0.so.0 => not found
libgdk_pixbuf-2.0.so.0 => not found
libpangocairo-1.0.so.0 => not found
libpango-1.0.so.0 => not found
libcairo.so.2 => not found
libgobject-2.0.so.0 => not found
libgmodule-2.0.so.0 => not found
libglib-2.0.so.0 => not found
libX11.so.6 => not found
libasound.so.2 => not found
libm.so.6 => /lib/i386-linux-gnu/i686/cmov/libm.so.6 (0xf76f4000)
libstdc++.so.6 => not found
libgcc_s.so.1 => /lib/i386-linux-gnu/libgcc_s.so.1 (0xf76d7000)
libc.so.6 => /lib/i386-linux-gnu/i686/cmov/libc.so.6 (0xf7527000)
/lib/ld-linux.so.2 (0xf7776000)
</pre>

Source bin not found terminates the FM L_TO_CREATE_2_STEP_PICKING for TRs

Similar Messages

Maybe you are looking for