Source clips and timeline wont play

Hi
I'm running ppCS5 from mastersuite on mac pro, osx 10.6.7, 2 x2.8 ghz quadcore with 4gb ram. I'm able to import video into my projects from both camera and from hard drive no problem. I can scrub through the clips/timeline and move frame by frame but when i press the play button, nothing is happening... any ideas? I've applied the most recent updates and had a look through a few forums but there doesnt seem to be anyone with a solid idea of what could be causing this...
short of reinstalling the whole mastersuite can anyone help?
Thanks in advance!

Thanks Colin. Tried that before coming on here to no avail. There is no playback at all. It's starting to really annoy me now - so frustrating. I've uninstalled and reinstalled . If i didnt have to complete partially finished premiere projects i'd use imovie...it doesnt have as many features and is weird to use, but at least it's reliable

Similar Messages

I purchased a song and it wont play...shows Codecs:AAC (protected), how do i get it to play?

I recently purchased a song on itunes and it wont play, when I go to my file and open up the info, i noticed that it shows Codec:AAC (protected) where my other songs are not. Or if im in itunes in my purchased song, when i open the info it shows Kind: AAC audio file where my other songs show Kind: Purchased AAC audio file. how do i get my song to play or get it unprotected?

Hi,
It would seem that you have a corrupted file. Delete track from your library and move to trash. You can now go back into iTunes Store / purchased where you will be able to down load the song again.
Jim

My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

TS1717 Error 42110 comes up at the end of my rental download and it wont play.

Error 42110 comes up at the end of my rental download and it wont play.

Hi there,
I would recommed taking a look at the troubleshooting steps found in the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
-Griff W.

HT4108 ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

I just bought a GSI HDMI Cable Adapter for my IPad2, which is running IOS 8. The adapter is not even recognized by the ipad.

HT201272 bought a song and it wont play how do i get it to play?

bought a song and it wont play.. how do i get it to play?

If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

I downloaded a song and it wont play....

I downloaded a song and it wont play, just skips to next song. How do I fix this??

How do I reload?? I went to purchased, and the cloud icon was not there. I deleted the song so I could just re-purchase it again, and it wont let me. This is so frustrating. I just get the song

HELP I DOWNLOAD A SONG AND IT WONT PLAY

im using windows vista an the new itunes and i cant seem to get my songs to play im paying for music and it wont play please help

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your phone and re-download it via the Purchased tab in the iTunes store app on it, or the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Previously downloaded albums and playlists wont play

Previously downloaded albums and playlists wont play. The only music that will play are those listed as "Recently Added". When I attempt to play any other music, I get the error message "The song could not be used because the original file could not be found." I have uninstalled and reinstalled iTunes. Any suggestions?

It is very possible that you have transferred icons only. This is a mistake I know I have made.

HT1727 i copied itune music from old hard drive to memory disk the copied onto new hard drive into itunes and music wont play unless removalbe disk is inserted

i copied itune music from old hard drive to memory disk the copied onto new hard drive into itunes and music wont play unless removalbe disk is inserted

Then your iTunes must be looking at the removable disc, not your hard drive. Did you actually copy the songs onto your computer, or simply tell iTunes to look at the removable drive?
Highlight a song and click on File/Get Info/Summary>Where and check the location that iTunes has listed for the song. What does it say?

I have rented a film and it wont play after 16mintues?

i have rented a film and it wont play after 16mintues?

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

I rented a movie and it wont play more then 2 minutes... what do i do?

i rented a movie and it wont play more then 2 minutes,what do i do?

take it from here and have Apple take care of it: https://expresslane.apple.com/Issues.action

I just downloaded a song and it wont play on my iPod

I have a 2nd gen. iPod and it wont play a song I recently downloaded (My Doorbell by The White Stripes). What should I do? I already tried downloading it again, and that didnt work.

I have a 2nd gen. iPod and it wont play a song I
recently downloaded (My Doorbell by The White
Stripes). What should I do? I already tried
downloading it again, and that didnt work.
I have the same issue with the same song. Itunes will play it, but my Ipod will skip several songs on the album before it starts to play.

I've bought songs on itunes and they wont play on my iphone

I've bought songs on itunes and they wont play on my iphone because a cloud is showing but wont download the song...frustrated!!! Sometimes I can listen to them and then the next day there's a cloud showing.

On your iPhone tap Settings > iTunes & App Store then make sure Music is switched ON.

Please help! first website! movie clip placed on main timeline wont play!

Hi! if any one could please help me it would be greatly
appreciated!
So im trying to make my first website in flash and ive ran
into a problem. I have the main movie, my main time line. I have a
few animations going on in this that were all created in that main
time line. those work fine. however, i created two new movie clips
(still inside the same .fla file) and animated them with thier own
time line. I then thought you could just drag and drop these movie
clips onto your main time line and they would play inside the
movie. but when i press ctrl + enter, the dont play!
here are some points of intrest.
my main movie (the main time line) is 130 frames.
the movie clips i made inside the same .fla file are between
400 and 600 frames.
i placed both new movie clips on the 130th frame in the time
line with their own layers.
also there is a layer for actions on the 130th that has
stop();
i thought that maybe the time line had to be as long as those
movie clips i created and so i extended it but they still didnt
play.
im thinking action script is involved? please help me im
getting pretty frustrated and im sure there is something simple to
achieve this.
here is a link where you can download the source files im
using. if you open the file the two movie clips i created are
called front two and front one and are layers with the same name.
this board wont let me fully post my link cause the last word
in it is s*h*i*t* so youll have to type it in your browser. its
http://public.me.com/matts*h*i*t*
(just remove the asterisks)
also i noticed that my file is huge. i used photoshop to
create everything and them imported it into flash. is there a way i
can reduce this size?
thank you sooo much! please help!
-Matt

Hey Matt,
I'll take a look at your file, but as a general rule, a
movieclip's timeline plays automatically when it is first
instantiated. Instatiated means its first frame where "it exists"
on the timeline that contains it. So the layer that holds your
movieclip animation, needs to extend the length of the timeline you
want that movieclip to "exist". Other than that rule, the frames
don't NEED to match the frames inside said movieclip.
So, if movieclips play automatically, and yours isn't, there
must be something either stopping the movieclips timeline, or your
movieclip isn't existing on the timeline because the layer that
holds it, doesn't have keyframes the length you need it to.
Yeah optimizing your sprites (2d graphical elements), and
using vector when you need to (if you don't know the difference
between raster and vector, google it) will significantly lower your
outputted .swf file size.
Edit: After looking at your file, your movieclips are not
playing (well, they're technically playing, just not showing up)
because your masker layer has multiple objects on it. A masker
layer (not to be confused with the maskee layer, the layer being
masked) needs to have only one object on it, or else you break the
mask. The grey border of your mask movieclip needs to be deleted
before your animation will play.

Source clips and timeline wont play

Similar Messages

Maybe you are looking for