Source compilation problems

Hi,
I'm trying to compile Solaris 8 sources. The build is failing at the time of compilation of a library.
The following error appears -
Text relocation remains referenced
against symbol offset in file
write                              0x1100      /opt/SUNWspro/SC5.0/lib/libm.a(SVID_error.o)
Also, ld fails with the error -
ld: fatal: relocations remain against allocatable but non-writable sections
Could someone let me know as to why this happens and what is it that should be done to correct this.
Thanks,
Vasu.

Hi CarrieHunt,
thanks for responding. Doesn't ant compile it? I built the webapp, thought that would be enough. I found many posts with similar problems, but nobody could explain to what refers this "cannot be resolved as a type". All the samples of tomcat work, only this one that I've copied and now want to modify doesn't and I don't understand why not. Here's the code:
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.net.URL;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.Source;
import javax.xml.transform.stream.StreamSource;
import javax.xml.transform.stream.StreamResult;
* This sample applies the todo.xsl stylesheet to the
* todo.xml XML document, and returns the transformation
* output (HTML) to the client browser.
public class SimpleXSLTServlet extends HttpServlet {
public void init(ServletConfig config) throws ServletException
super.init(config);
public void doGet (HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
// Output goes in the response stream.
PrintWriter out = new PrintWriter (response.getOutputStream());
// The servlet returns HTML.
response.setContentType("text/html");
try
TransformerFactory tFactory = TransformerFactory.newInstance();
// Get the XML input document and the stylesheet.
Source xmlSource = new StreamSource(new URL("http://localhost/todo.xml").openStream());
Source xslSource = new StreamSource(new URL("http://localhost/todo.xsl").openStream());
// Generate the transformer.
Transformer transformer = tFactory.newTransformer(xslSource);
// Perform the transformation, sending the output to the response.
transformer.transform(xmlSource, new StreamResult(out));
catch (Exception e)
out.write(e.getMessage());
e.printStackTrace(out);
out.close();
Thanks a lot!!! :)

Similar Messages

  • Re: [iPlanet-JATO] sp3 jsp compiler problem

    Weiguo,
    First, Matt is correct, the regular expression tool is perfect for general text
    substitution situations, and as a completely independent tool its use is not
    restricted to migration situations (or file types for that matter).
    Second, I sympathize with the unfortunate trouble you are experiencing due to
    Jasper's (perhaps more strict) compilation, but in what way did the iMT
    automated translation contribute to these inconsistencies that you cited?
    1. Changed the case of the tag attribute to be the same as what's
    defined in tld.
    example: changed OnClick to onClick
    The iMT does not generate any OnClick or onClick clauses per se. In a
    translation situation, the only way "OnClick" would have been introduced was if
    it had been part of the pre-existing project's "extraHTML" (which was written
    by the original customer and just passed through unchanged by the iMT) or if it
    was added manually by the post-migration developer.
    2. Removed attributes which are not defined in tld.
    example: escape attribute only defined in three tags
    but in some pages, it's used although it's not defined as an
    attribute
    of certain tags. The jasper compiler doesn't like it.Can you give soem examples? Is there a definite pattern? Again, this might be
    similar to the OnClick situation described above?
    3. In an end tag, there can't be any space.
    example: </content > doesn't work. </content> works.
    Again, the content tag would never have been generated by the iMT. There was no
    equivalent in the NetDynamics world, so any content tags in your code must have
    been introduced by your developers manually. Its a shame that jasper is so
    particular, but the iMT could not help you out here even if we wanted to. The
    constants that are used by the iMT are defined in
    com.iplanet.moko.jsp.convert.JspConversionConstants. From what I can see, the
    only situation of a closing tag with any space in it is
    public static final String CLOSE_EMPTY_ELEMENT = " />";
    But that should not cause the type of problem you are referring to.
    Mike
    ----- Original Message -----
    From: Matthew Stevens
    Sent: Thursday, September 06, 2001 10:16 AM
    Subject: RE: [iPlanet-JATO] sp3 jsp compiler problem
    Weiguo,
    Others will chime in for sure...I would highly recommend the Regex Tool from
    the iMT 1.1.1 for tackling this type of problem. Mike, Todd and myself have
    posted to the group (even recently) on directions and advantages of creating
    your own RULES (rules file) in XML for arbitary batch processing of source.
    matt
    -----Original Message-----
    From: weiguo.wang@b...
    [mailto:<a href="/group/SunONE-JATO/post?protectID=125056020108194190033029175101192165174144234026000079108238073194105057099246073154180137239239223019162">weiguo.wang@b...</a>]
    Sent: Thursday, September 06, 2001 12:25 PM
    Subject: [iPlanet-JATO] sp3 jsp compiler problem
    Matt/Mike/Todd,
    We are trying to migrate to sp3 right now, but have had a lot of
    issues with the new jasper compiler.
    The following workaround has been employed to solve the issues:
    1. Changed the case of the tag attribute to be the same as what's
    defined in tld.
    example: changed OnClick to onClick
    2. Removed attributes which are not defined in tld.
    example: escape attribute only defined in three tags
    but in some pages, it's used although it's not defined as an
    attribute
    of certain tags. The jasper compiler doesn't like it.
    3. In an end tag, there can't be any space.
    example: </content > doesn't work. </content> works.
    As I see it, we have two options to go about solving this problem:
    1. Write a script which will iterate through all the jsp files and
    call jspc on them. Fix the errors manually when jspc fails. Jspc will
    flag the line number where an error occurs.
    2. Write a utility which scans the jsp files and fix the errors when
    they are encountered. We should define what's an error and how to
    correct it. It's best if we combine this with solution 1 since we
    might miss an error condition.
    Actually, there might be another option, which is seeking help from
    you guys since you have better understanding of JATO and iAS. Can you
    do anything to help us?
    We would be happy to hear your thoughts.
    At last, I would like to suggest modifying the moko tool so that
    these rules are enforced and the generated JSPs work with the new
    compiler. This is for the benefit of any new migration projects.
    Thanks a lot.
    Weiguo
    [email protected]
    Choose from 1000s of job listings!
    [email protected]
    [Non-text portions of this message have been removed]

    Thanks a lot Matt and Mike for your prompt replies.
    I agree completely that iMT doesn't introduce the inconsistencies.
    About the three cases I mentioned, the third one happens only in
    manually created JSPs. So it has nothing to do with iMT. The first
    two are mainly due to the existing HTML code, as you rightly pointed
    out.
    The reason I made the suggestion is since we know that case 1 and 2
    won't pass the japser compiler in sp3, we have to do something about
    it. The best place to do this, in my mind, is iMT. Of course, there
    might be some twists that make it impossible or difficult to do this
    kind of case manipulation or attribute discard.
    Weiguo
    --- In iPlanet-JATO@y..., "Mike Frisino" <Michael.Frisino@S...> wrote:
    Weiguo,
    First, Matt is correct, the regular expression tool is perfect for general text substitution situations, and as a completely independent
    tool its use is not restricted to migration situations (or file types
    for that matter).
    >
    Second, I sympathize with the unfortunate trouble you are experiencing due to Jasper's (perhaps more strict) compilation, but
    in what way did the iMT automated translation contribute to these
    inconsistencies that you cited?
    >
    1. Changed the case of the tag attribute to be the same as what's
    defined in tld.
    example: changed OnClick to onClick
    The iMT does not generate any OnClick or onClick clauses per se. In a translation situation, the only way "OnClick" would have been
    introduced was if it had been part of the pre-existing
    project's "extraHTML" (which was written by the original customer and
    just passed through unchanged by the iMT) or if it was added manually
    by the post-migration developer.
    >
    2. Removed attributes which are not defined in tld.
    example: escape attribute only defined in three tags
    but in some pages, it's used although it's not defined as an
    attribute
    of certain tags. The jasper compiler doesn't like it.Can you give soem examples? Is there a definite pattern? Again, this might be similar to the OnClick situation described above?
    >
    >
    3. In an end tag, there can't be any space.
    example: </content > doesn't work. </content> works.
    Again, the content tag would never have been generated by the iMT. There was no equivalent in the NetDynamics world, so any content tags
    in your code must have been introduced by your developers manually.
    Its a shame that jasper is so particular, but the iMT could not help
    you out here even if we wanted to. The constants that are used by the
    iMT are defined in
    com.iplanet.moko.jsp.convert.JspConversionConstants. From what I can
    see, the only situation of a closing tag with any space in it is
    public static final String CLOSE_EMPTY_ELEMENT = " />";
    But that should not cause the type of problem you are referring to.
    Mike
    ----- Original Message -----
    From: Matthew Stevens
    Sent: Thursday, September 06, 2001 10:16 AM
    Subject: RE: [iPlanet-JATO] sp3 jsp compiler problem
    Weiguo,
    Others will chime in for sure...I would highly recommend the Regex Tool from
    the iMT 1.1.1 for tackling this type of problem. Mike, Todd and myself have
    posted to the group (even recently) on directions and advantages of creating
    your own RULES (rules file) in XML for arbitary batch processing of source.
    >
    matt
    -----Original Message-----
    From: weiguo.wang@b...
    [mailto:<a href="/group/SunONE-JATO/post?protectID=125056020108194190033029175101192165174048139046">weiguo.wang@b...</a>]
    Sent: Thursday, September 06, 2001 12:25 PM
    Subject: [iPlanet-JATO] sp3 jsp compiler problem
    Matt/Mike/Todd,
    We are trying to migrate to sp3 right now, but have had a lot of
    issues with the new jasper compiler.
    The following workaround has been employed to solve the issues:
    1. Changed the case of the tag attribute to be the same as
    what's
    defined in tld.
    example: changed OnClick to onClick
    2. Removed attributes which are not defined in tld.
    example: escape attribute only defined in three tags
    but in some pages, it's used although it's not defined as an
    attribute
    of certain tags. The jasper compiler doesn't like it.
    3. In an end tag, there can't be any space.
    example: </content > doesn't work. </content> works.
    As I see it, we have two options to go about solving this problem:
    >>
    1. Write a script which will iterate through all the jsp files and
    call jspc on them. Fix the errors manually when jspc fails. Jspc will
    flag the line number where an error occurs.
    2. Write a utility which scans the jsp files and fix the errors when
    they are encountered. We should define what's an error and how to
    correct it. It's best if we combine this with solution 1 since we
    might miss an error condition.
    Actually, there might be another option, which is seeking help from
    you guys since you have better understanding of JATO and iAS. Can you
    do anything to help us?
    We would be happy to hear your thoughts.
    At last, I would like to suggest modifying the moko tool so that
    these rules are enforced and the generated JSPs work with the new
    compiler. This is for the benefit of any new migration projects.
    Thanks a lot.
    Weiguo
    [email protected]
    Choose from 1000s of job listings!
    [email protected]
    Service.
    >
    >
    >
    [Non-text portions of this message have been removed]

  • Compilation problem on solaris9  x86

    I am working on JAVA/J2EE . Am new to solaris9 . My requirement is to compile a source distribution of MOD-JK 1.2.21 (apache 2.0 server connector)and to produce binary distribution (*.so file) in solaris9 X86 box. But i got only source distribution of solaris10 X86 platform . Even with this source i tried to compile in solaris9 box its giving some error message and i can't able to make a executable file. Below i pasted the error message .
    # ./configure -with-apxs=/usr/apache2/bin/apxs
    checking build system type... i386-pc-solaris2.10
    checking host system type... i386-pc-solaris2.10
    checking target system type... i386-pc-solaris2.10
    checking for a BSD-compatible install... scripts/build/unix/install-sh -c
    checking whether build environment is sane... yes
    checking for gawk... no
    checking for mawk... no
    checking for nawk... nawk
    checking whether make sets $(MAKE)... no
    checking for gcc... no
    checking for cc... cc
    checking for C compiler default output file name... configure: error: C compiler cannot create executables
    See `config.log' for more details.
    Can any body help me in this regards. Even i don't know, am proceeding in right direction to compile this file. If any body having the binary distribution for the same MOD-JK1.2.21 on solaris9 or solaris10 X86 platform for apache2.0 . please help me to compile this file .I given below the config.log file entries also.
    Thanks in advance..........
    karthikeyan.u
    [email protected]
    AIM or AOL :: karthikeyanu
    CONFIG.log entries......
    This file contains any messages produced by compilers while
    running configure, to aid debugging if configure makes a mistake.
    It was created by configure, which was
    generated by GNU Autoconf 2.59. Invocation command line was
    $ ./configure -with-apxs=/usr/apache2/bin/apxs
    ## Platform. ##
    hostname = Solaris
    uname -m = i86pc
    uname -r = 5.10
    uname -s = SunOS
    uname -v = Generic_118844-26
    /usr/bin/uname -p = i386
    /bin/uname -X = System = SunOS
    Node = Solaris
    Release = 5.10
    KernelID = Generic_118844-26
    Machine = i86pc
    BusType = <unknown>
    Serial = <unknown>
    Users = <unknown>
    OEM# = 0
    Origin# = 1
    NumCPU = 1
    /bin/arch = i86pc
    /usr/bin/arch -k = i86pc
    /usr/convex/getsysinfo = unknown
    hostinfo = unknown
    /bin/machine = unknown
    /usr/bin/oslevel = unknown
    /bin/universe = unknown
    PATH: /usr/sbin
    PATH: /usr/bin
    PATH: /usr/openwin/bin
    PATH: /usr/ucb
    ## Core tests. ##
    configure:1546: checking build system type
    configure:1564: result: i386-pc-solaris2.10
    configure:1572: checking host system type
    configure:1586: result: i386-pc-solaris2.10
    configure:1594: checking target system type
    configure:1608: result: i386-pc-solaris2.10
    configure:1640: checking for a BSD-compatible install
    configure:1695: result: scripts/build/unix/install-sh -c
    configure:1706: checking whether build environment is sane
    configure:1749: result: yes
    configure:1814: checking for gawk
    configure:1843: result: no
    configure:1814: checking for mawk
    configure:1843: result: no
    configure:1814: checking for nawk
    configure:1830: found /usr/bin/nawk
    configure:1840: result: nawk
    configure:1850: checking whether make sets $(MAKE)
    configure:1874: result: no
    configure:2085: checking for gcc
    configure:2114: result: no
    configure:2165: checking for cc
    configure:2181: found /usr/ucb/cc
    configure:2191: result: cc
    configure:2355: checking for C compiler version
    configure:2358: cc --version </dev/null >&5
    /usr/ucb/cc: language optional software package not installed
    configure:2361: $? = 1
    configure:2363: cc -v </dev/null >&5
    /usr/ucb/cc: language optional software package not installed
    configure:2366: $? = 1
    configure:2368: cc -V </dev/null >&5
    /usr/ucb/cc: language optional software package not installed
    configure:2371: $? = 1
    configure:2394: checking for C compiler default output file name
    configure:2397: cc conftest.c >&5
    /usr/ucb/cc: language optional software package not installed
    configure:2400: $? = 1
    configure: failed program was:
    | /* confdefs.h. */
    |
    | #define PACKAGE_NAME ""
    | #define PACKAGE_TARNAME ""
    | #define PACKAGE_VERSION ""
    | #define PACKAGE_STRING ""
    | #define PACKAGE_BUGREPORT ""
    | #define PACKAGE "mod_jk"
    | #define VERSION "1.2.21"
    | /* end confdefs.h. */
    |
    | int
    | main ()
    | {
    |
    | ;
    | return 0;
    | }
    configure:2439: error: C compiler cannot create executables
    See `config.log' for more details.
    ## Cache variables. ##
    ac_cv_build=i386-pc-solaris2.10
    ac_cv_build_alias=i386-pc-solaris2.10
    ac_cv_env_CC_set=
    ac_cv_env_CC_value=
    ac_cv_env_CFLAGS_set=
    ac_cv_env_CFLAGS_value=
    ac_cv_env_CPPFLAGS_set=
    ac_cv_env_CPPFLAGS_value=
    ac_cv_env_CPP_set=
    ac_cv_env_CPP_value=
    ac_cv_env_CXXCPP_set=
    ac_cv_env_CXXCPP_value=
    ac_cv_env_CXXFLAGS_set=
    ac_cv_env_CXXFLAGS_value=
    ac_cv_env_CXX_set=
    ac_cv_env_CXX_value=
    ac_cv_env_F77_set=
    ac_cv_env_F77_value=
    ac_cv_env_FFLAGS_set=
    ac_cv_env_FFLAGS_value=
    ac_cv_env_LDFLAGS_set=
    ac_cv_env_LDFLAGS_value=
    ac_cv_env_build_alias_set=
    ac_cv_env_build_alias_value=
    ac_cv_env_host_alias_set=
    ac_cv_env_host_alias_value=
    ac_cv_env_target_alias_set=
    ac_cv_env_target_alias_value=
    ac_cv_host=i386-pc-solaris2.10
    ac_cv_host_alias=i386-pc-solaris2.10
    ac_cv_prog_AWK=nawk
    ac_cv_prog_ac_ct_CC=cc
    ac_cv_prog_make_make_set=no
    ac_cv_target=i386-pc-solaris2.10
    ac_cv_target_alias=i386-pc-solaris2.10
    ## Output variables. ##
    ACLOCAL='${SHELL} /export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/missing --run aclocal-1.9'
    AMDEPBACKSLASH=''
    AMDEP_FALSE=''
    AMDEP_TRUE=''
    AMTAR='${SHELL} /export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/missing --run tar'
    APACHE20_OEXT=''
    APACHE_CONFIG_VARS=''
    APACHE_DIR=''
    APXS=''
    APXSCFLAGS=''
    APXSCPPFLAGS=''
    APXSLDFLAGS=''
    AR=''
    AUTOCONF='${SHELL} /export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/missing --run autoconf'
    AUTOHEADER='${SHELL} /export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/missing --run autoheader'
    AUTOMAKE='${SHELL} /export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/missing --run automake-1.9'
    AWK='nawk'
    CC='cc'
    CCDEPMODE=''
    CFLAGS=''
    CP=''
    CPP=''
    CPPFLAGS=''
    CXX=''
    CXXCPP=''
    CXXDEPMODE=''
    CXXFLAGS=''
    CYGPATH_W='echo'
    DEFS=''
    DEPDIR=''
    ECHO='echo'
    ECHO_C=''
    ECHO_N='-n'
    ECHO_T=''
    EGREP=''
    EXEEXT=''
    F77=''
    FFLAGS=''
    GREP=''
    INSTALL_DATA='${INSTALL} -m 644'
    INSTALL_PROGRAM='${INSTALL}'
    INSTALL_SCRIPT='${INSTALL}'
    INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
    INSTALL_TYPE=''
    JAVA_HOME=''
    JK_JNI_WORKER=''
    LDFLAGS=''
    LIBOBJS=''
    LIBS=''
    LIBTOOL=''
    LIB_JK_TYPE=''
    LN_S=''
    LTLIBOBJS=''
    MAKEINFO='${SHELL} /export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/missing --run makeinfo'
    MAKE_DYNAMIC_APACHE_FALSE=''
    MAKE_DYNAMIC_APACHE_TRUE=''
    MKDIR=''
    OBJEXT=''
    OS=''
    PACKAGE='mod_jk'
    PACKAGE_BUGREPORT=''
    PACKAGE_NAME=''
    PACKAGE_STRING=''
    PACKAGE_TARNAME=''
    PACKAGE_VERSION=''
    PATH_SEPARATOR=':'
    PERL=''
    RANLIB=''
    RM=''
    SED=''
    SET_MAKE='MAKE=make'
    SHELL='/bin/bash'
    STRIP=''
    TEST=''
    VERSION='1.2.21'
    WEBSERVER=''
    ac_ct_AR=''
    ac_ct_CC='cc'
    ac_ct_CXX=''
    ac_ct_F77=''
    ac_ct_RANLIB=''
    ac_ct_STRIP=''
    am__fastdepCC_FALSE=''
    am__fastdepCC_TRUE=''
    am__fastdepCXX_FALSE=''
    am__fastdepCXX_TRUE=''
    am__include=''
    am__leading_dot='.'
    am__quote=''
    am__tar='${AMTAR} chof - "$$tardir"'
    am__untar='${AMTAR} xf -'
    apache_include=''
    bindir='${exec_prefix}/bin'
    build='i386-pc-solaris2.10'
    build_alias=''
    build_cpu='i386'
    build_os='solaris2.10'
    build_vendor='pc'
    datadir='${prefix}/share'
    exec_prefix='NONE'
    host='i386-pc-solaris2.10'
    host_alias=''
    host_cpu='i386'
    host_os='solaris2.10'
    host_vendor='pc'
    includedir='${prefix}/include'
    infodir='${prefix}/info'
    install_sh='/export/home/dump_208/workspace_SB_563/modjk/ModJK1/modjk/jkk/tomcat-connectors-1.2.21-src/native/scripts/build/unix/install-sh'
    int32_t_fmt=''
    int32_value=''
    int64_t_fmt=''
    int64_value=''
    libdir='${exec_prefix}/lib'
    libexecdir='${exec_prefix}/libexec'
    localstatedir='${prefix}/var'
    mandir='${prefix}/man'
    mkdir_p='$(install_sh) -d'
    oldincludedir='/usr/include'
    prefix='NONE'
    program_transform_name='s,x,x,'
    sbindir='${exec_prefix}/sbin'
    sharedstatedir='${prefix}/com'
    sysconfdir='${prefix}/etc'
    target='i386-pc-solaris2.10'
    target_alias=''
    target_cpu='i386'
    target_os='solaris2.10'
    target_vendor='pc'
    uint32_t_fmt=''
    uint32_t_hex_fmt=''
    uint64_t_fmt=''
    uint64_t_hex_fmt=''
    ## confdefs.h. ##
    #define PACKAGE "mod_jk"
    #define PACKAGE_BUGREPORT ""
    #define PACKAGE_NAME ""
    #define PACKAGE_STRING ""
    #define PACKAGE_TARNAME ""
    #define PACKAGE_VERSION ""
    #define VERSION "1.2.21"
    configure: exit 77

    You need to make sure the source is for the same version i.e. if you run apache 2.0.52 you need the source of 2.0.52. I successfully ran mixed installs, but I would not recommend it. You can download the required source from Apache.
    As for your compiler problem, make sure you have �/usr/ccs/bin/� in the your path, if you do not have it installed you will have to add the pkg �SUNWsprot�. You do not have 'make' in yout path.
    Make sure you have the following packages installed:
    SUNWbtool, SUNWsprot, SUNWtoo
    SUNWhea, SUNWarc, SUNWlibm, SUNWlibms
    SUNWdfbh, SUNWcg6h, SUNWxwinc, SUNWolinc,
    SUNWxglh,SUNWarcx, SUNWbtoox, SUNWdplx,
    SUNWscpux, SUNWsprox, SUNWlmsx, SUNWlmx
    SUNWlibCx, SUNWtoox, SUNWsra, SUNWsrh

  • Boxee-source compilation "checking for main in -ldl... no"

    Hello Guys and Girls,
    I'm trying to get Boxee to run on my laptop so that I can setup up on a small homebuild HTPC running a naked Arch Linux Installation in the future.
    I have tried the versions that are in the AUR and got them to install after linking some header files, downgrading glew etc. but they are very old and
    are teaming with bugs. The repo found in the Wiki https://wiki.archlinux.org/index.php/Boxee-source is outdated as well. The current Version is 1.5
    and it is downloading 0.9.8.something from the repo.
    There are 32 and 64 bit *.deb's for Ubuntu available on boxee.tv/download, but Ubuntu is way to bloated and I don't know how to work with it
    when it comes to more advanced configuration (booting straight into X11 and starting boxee trough .xinitrc which worked fine with xbmc).
    Made me realize what a great learning tool Arch Linux is.
    So I downloaded the Sorce Code and extracted it and opened the README.ubuntu to find some building instructions.
    TOC
    1. Introduction
    2. Installing the required Ubuntu packages
    3. How to compile
    4. Create Installer
    1. Introduction
    We currently recommend Ubuntu 11.10.
    NOTE TO NEW LINUX USERS: All lines that are prefixed with the '#'
    character are commands that need to be typed into a terminal window /
    console (similar to the command prompt for Windows). Note that the '#'
    character itself should NOT be typed as part of the command.
    2. Installing the required Ubuntu packages
    # sudo apt-get install make g++ gcc gawk pmount nasm automake cmake bison libsdl1.2-dev libsdl-image1.2-dev libfribidi-dev liblzo2-dev libfreetype6-dev libsqlite3-dev libogg-dev libasound2-dev python-sqlite libglew1.5-dev libcurl4-openssl-dev libmad0-dev libogg-dev libvorbis-dev libsmbclient-dev libmysqlclient-dev libpcre3-dev libdbus-1-dev libjasper-dev libfontconfig1-dev libbz2-dev libboost-dev libfaac-dev libenca-dev libpng12-dev libjpeg62-dev libcdio-dev libsamplerate0-dev libmms-dev libmpeg3-dev libfaad-dev libflac-dev doxygen php5 swig libssl-dev libgdbm-dev libvdpau-dev libxmu-dev libxtst-dev libxinerama-dev libhal-dev libhal-storage-dev gperf libtool
    3. How to compile
    # ./bootstrap
    # ./configure --enable-optimizations --disable-debug
    # make -j4
    # make -C tools/TexturePacker -f Makefile.host
    # rm skin/boxee/media/Textures.xbt
    # make -C skin/boxee/media
    4. Create installer
    # cd debian
    # sudo ./make_debian.sh
    ./bootstrap wored fine.
    With ./configure I ran into problems a few times but managed to fix them on my own ( installed libmms, lz02, mysql-clients etc. when check failed)
    but now I'm stuck at: "checking for main in -ldl... no" and I have no clue how to fix it. What am I missing?
    Once I get this to compile and run I want to contribute my first package to the AUR. Would be a good opportunity to get familiar with ABS, PKGBUILDs and all
    that.
    Regards,
    blackout23
    Last edited by blackout23 (2011-12-30 22:42:21)

    Looks like a linking issue?
    http://phaseit.net/claird/comp.unix.programmer/linking-unix.html wrote:
    Linux's dl library
    There are at least two distinct problem symptoms with dynamic-linking that Linux users frequently report: that
        the configure for Tcl and/or derivatives think that dynamic linking is not possible; and
        a makefile which attempts dynamic linking fails for not resolving "... -ldl ..." adequately.
    To the best of my knowledge, all instances of the former problem have been traced back to an inconsistency between configure and other sources, typically the result of incomplete application of a patch, mis-installation of a compiler and its ancillary libraries, or some sort of cross-OS contamination. As far as I know, correcting any compiler problems and doing a "make distclean" to sanitize the Tcl source directory has always been enough to cure the situation.
    Some installations (Slackware 2.1? 3.1? others? Red Hat before 4.0?) are reputed to have a missing symbolic link between /lib/libdl.so.1 and /lib/libdl.so. Any application which employs dynamic linking, and which therefore links with "... -ldl ..." under Linux, apparently will fail until one completes the installation by commanding
               ln -s /lib/libdl.so.1 /lib/libdl.so
    That's the whole story that I know. However, those unfamiliar with Unix deserve a warning: the previous paragraph used "link" in three distinct senses. If these matters are new to you, you might feel more comfortable substituting
               cp /lib/libdl.so.1 /lib/libdl.so
    for the "ln ..." command above. When I'm able to make time, I'll return to explain these matters more fully.
    Why isn't there a /lib/libdl.a? That's an involved topic, one that I aim to document later in spring '97.
    ldconfig is sometimes an issue for Linux. I'll document it once I understand it better.

  • Unresolve compilation problems

    I have narrowed a bug down to three lines of code. I do not see what is wrong with this code. In fact I am so sure of the code I was wondering if it may be a bug in 1.5
    I get the error:
    Exception in thread "main" java.lang.Error: Unresolved compilation problems:
         Syntax error, insert "AssignmentOperator Expression" to complete Assignment
         Syntax error, insert ";" to complete Statement
         LVN cannot be resolved
         foo cannot be resolved
         e cannot be resolved
    on the the last line of :
    if (useLVN)
             for(Enumeration e = ilocGen.getRoutines().elements(); e.hasMoreElements();)
                  LVN foo = new LVN((BasicBlock) e.nextElement());LVN is a class who's constructor takes a BasicBlock as an argument. iloc.getRoutines() returns a vector and useLVN is a boolean that is set earlier in the program. The program was fully functional until I inserted these three lines. if I replace the body of the for loop with ";" the code will still execute.
    Has anyone seen this kind of error before? Can someone clue me into what I am doing wrong? or is this something that should be taken to a bug report of some kind?

    I recreated the issue. The error appears in the last line of source code. Below is the full source code for all of the classes. As a note I am using jre1.5.0_06 and eclipse 3.2.1 as my IDE. The operating system I am currently using is Windows XP Pro. (Obviously not that it should matter based on the language in question.)
    File:
    BasicBlock.java
    public class BasicBlock {
         public String str;
         public BasicBlock(String in){
              str = in;
    IlocGenerator.java
    import java.util.Vector;
    public class IlocGenerator {
          Vector routines = new Vector();
          public Vector getRoutines() {
                  return routines;
          public void addRoutine(IlocRoutine in){
              routines.add(in);
    LVN.java
    public class LVN {
         public LVN(BasicBlock in){
              System.out.println(in.str);
    IlocRoutine.java
    import java.util.*;
    public class IlocRoutine {
         private Vector Blocks;
         public IlocRoutine(){
              Blocks = new Vector();
         public void addBasicBlock(BasicBlock in){
              Blocks.add(in);          
         public Vector getBasicBlocks() {
             return Blocks;
    MainProg.java
    import java.util.Enumeration;
    public class MainProg {
         public static void main(String[] args) {
              boolean useLVN = true;
              IlocGenerator ilocGen = new IlocGenerator();
              IlocRoutine iR = new IlocRoutine();
              BasicBlock bB = new BasicBlock("one");
              iR.addBasicBlock(bB);
              bB = new BasicBlock("two");
              iR.addBasicBlock(bB);
              ilocGen.addRoutine(iR);
              iR = new IlocRoutine();
              bB = new BasicBlock("three");
              iR.addBasicBlock(bB);
              bB = new BasicBlock("four");
              iR.addBasicBlock(bB);
              ilocGen.addRoutine(iR);
             if (useLVN)
                  for(Enumeration e = ilocGen.getRoutines().elements(); e.hasMoreElements();)
                       for (Enumeration f = ((IlocRoutine) e.nextElement()).getBasicBlocks().elements(); f.hasMoreElements();)
                            LVN foo = new LVN((BasicBlock) f.nextElement());
    }Message was edited by:
    mtu9000 (added environment information)

  • Compiling problem related to library conflict

    Hi everybody,
    As I used JDeveloper 10.1.3.0.3 to compile my program, I encounted a compiling problem.
    In my user library, I have a class named Number.
    In J2SE 1.5, there is also a class named Number at java.lang.Number.
    So as I compiled the program, the compiler always tried to find the java.lang.Number first, then I got the compiling errors related to the class java.lang.Number.
    I have added the jar file of my own package in the classpath, but I still got the compiling error.
    But If I directly use JDK instead of JDeveloper to compiler the program, there is no such kind of problem.
    Can somebody help me with that.
    I really apprecaite your help.
    William

    Looks like I've been dumbed down by Java simpliciy. I'm referencing some source code that calls a function from this particular library. When I am compiling my code that makes the same call, I assume I need that library to be called out for the linker (link.exe). Do I also need any other libraries that this library calls and so on? How do I determine that the extent of what I need. The source code I'm referncing does include a make file. This was to create and exe file. Is it possible that I can edit this and have it make a dll instead?

  • JSP Compilation Problems With JSTL tags

    My JSP worked well when I used JSP expressions, scriptlets, .... I tried to use JSTL instead and encountered some compilation problems. I am unable to see my mistakes and need help:
    Problme #1:
    int offset = 0;
    try
       <c:set var="offset" value="${requestScope.offset}" />
    catch ( Exception e )
        // do nothing
    }The above code has two compilation errors:
    Generated servlet error:
    [javac] Compiling 1 source file
    illegal start of expression
    <c:set var="offset" value="${requestScope.offset}" />
    ^
    Generated servlet error:
    ';' expected
    <c:set var="offset" value="${requestScope.offset}" />
    ^
    Problem #2:
    <c:set var="threadBean" value="${requestScope.ThreadBean}" />
    int threadID_int = ParamUtil.getParameterInt( request, "thread" );
    <c:if test="${threadBean.threadID} != threadID_int">
        throw new AssertionException( "The two threadID are not the same." );
    </c:if>Generated servlet error:
    illegal start of expression
    <c:if test="${threadBean.threadID != threadID_int}">
    ^

    I have deleted the Java code around the JSTL tags. Now, what is wrong with this <c:if test=" ... "> tag? It seems that I have problems to get JSTL tags right.
    It seems that I have problems to get JSTL tags right....
    <c:if test="${attachBean.attachMimeType.startsWith('image/')}">
         <html:img page="getattachment?attach=<c:out value='${attachBean.attachID}' />" alt="<c:out value='${attachBean.attachFilename}' />" title="<c:out value='${attachBean.attachFilename}' />" border="0" />
    </c:if>error message:
    74: tag = 'if' / attribute = 'test': An error occurred while parsing custom action attribute "test" with value "${attachBean.attachMimeType.startsWith('image/')}": Encountered "(", expected one of ["}", ".", ">", "gt", "<", "lt", "==", "eq", "<=", "le", ">=", "ge", "!=", "ne", "[", "+", "-", "*", "/", "div", "%", "mod", "and", "&&", "or", "||"]

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • Hard drive issues due to Time Machine backup? Can't source the problem.

    Last night my computer began to run extremely slow. All apps simultaneously lagged (spinning wheel of death), but then began working again after about 0.5-1 minute. This whole-system crash repeated about every 10 minutes a total of probably 5-6 times. The last time all apps stopped functioning and (CPU usage of iTunes was 85-95% for some reason (viewed using activity monitor), I am guessing due to its use of multiple hard drives as my music is stored on an external drive) and my computer just shut off after about 3 minutes of completely stalling. Rebooted computer and was left with an EXTREMELY slow system; opening up the quick menu (forgot the name, button on the top row of keyboard) for booting applications took 2-3 minutes. I eventually started disk utility, verified disk. It said I needed to repair disk by restarting my computer while holding down [Command] R message. Made sure i had a backup (at the time of that backup my computer was experiencing the problems above, 11:21pm), so I restarted whilst holding command R. Booted into the OSX utilities, retried the disk repair, received the "Disk Utility cannot repair this drive: back up as many files as you can..." message. Erased/reformatted my internal hard drive, and ran "repair disk" again; disk utility found no problems with the disk. Restored my files to my internal hard drive using OSX utilities (using the full system restore of the 11:21pm backup), and left it running while ran some errands. When I came back to look at my computer, it had attempted startup and crashed with the "kernel error" or whatever where all the text is on the left of the screen. It said something about not being able to find "disk2", which I believe was the disk containing OSX utilities (as veiwed in disk utility while running OSX utilities). Force shutdown, reboot with command R, wiped my internal drive again. Decided to only install a fresh version of OSX in an attempt to scan for viruses (using Sophos Antivirus, running scan as I am typing this), as the slow behavior of my computer had been very strange and began almost instantaneously (seemed like a virus/malware). No threats found so far with Sophos (scanning all my external drives too to source the problem in time machine backups), but I have deduced that there is something wrong with the most current Time machine backup, as it re-established the "problem" (easily fixed once drive is erased using OSX utilities) with my hard drive once I restored it to my internal hard drive. I am wondering (if it is not a virus) if I will need to repeat this whole process with every time machine backup to find where it went wrong, or if i can somehow pinpoint the problem easier. Will all of my Time Machine backups be corrupted now? Why would the Time Machine backup affect the state of the hard drive (does in need to be repaired or not)? Very confused at these random problems. If it is a virus (I will post the results of the Sophos antivirus scan as soon as it is finished), can I remove it from the backup and then restore it with no problems? What do you suggest I do? Will it make a difference to restore the most recent backup (11:21pm) using Migration assistant now that I am running a fresh install of OSX mountain lion? How can I source and eliminate the problem?

    Activity Monitor – Monitor Performance Problems  
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Servlet Compilation Problem !

    Hi,
    I am just starting to learn servlets and I got problem in compiling them. I got compilation error in
    import javax.servlet.*;statement. Seems that the compiler cannot find the servlet package. I got J2EE 1.4 beta installed on my machine but there is no servlet.jar package. I am using J2SDK 1.4.1_02, J2EE 1.4 beta and Tomcat 4.1.24.
    Can anyone help me with my servlet compilation problem?
    Thanks in advance!
    Josh

    servlet.jar is here :
    <tomcatdir>\common\lib
    add it to your compiler classpath

  • Compilation problem in a JSP page

    Hi all,
    I'm trying to write a jsp page and some java stuff in it.
    It goes something like this -
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <%@ page contentType="text/html;charset=windows-1255"%>
    <html>
      <head>
        <meta http-equiv="Content-Type" content="text/html; charset=windows-1255"/>
        <title>Michael</title>
      </head>
      <body>
    <%
              String strError="";
    %>
    </body>Now the problem is that I get compilation problem about the use in java -
    "String cannot be resolved to a type"
    I know for sure that in other computers it's work, the question is what I'm missing?
    I have Java VM installed and I've downloaded and installed the latest JDK, what else?
    thanks,
    Michael.

    Michael4488 wrote:
    BalusC wrote:
    Then you should be using JSTL/EL.I don't familiar with this technology, any way - Its work on one computer so in my understanding it should work on the other as well.It is not related to the actual problem. It was just a comment on your code. Using scriptlets is considered as bad practice.
    I understand that of course, but I don't use any configuration file or set any special parameters in my computer.
    What exactly does the compiler need in order to recognize the Java code in the JSP page? If i manually add the JAVA_HOME environment variable it will work?
    where should I refer it to? "..\Java\jre1.6.0_07\lib" will do?It must point to the root installation directory of the JDK (thus not the JRE!).

  • Compilation problem with templates while using option -m64

    Hi,
    I have compilation problem with template while using option -m64.
    No problem while using option -m32.
    @ uname -a
    SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
    $ CC -V
    CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
    Here is some C++ program
    ############# foo5.cpp #############
    template <typename T, T N, unsigned long S = sizeof(T) * 8>
    struct static_number_of_ones
    static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
    static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
    template <typename T, T N>
    struct static_number_of_ones<T, N, 0>
    static const T m_value = N;
    static const unsigned long m_count = 0;
    template <typename T, T N>
    struct static_is_power_of_2
    static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
    template <unsigned long N>
    struct static_number_is_power_of_2
    static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
    int main(int argc)
    int ret = 0;
    if (argc > 1)
    ret += static_is_power_of_2<unsigned short, 16>::m_result;
    ret += static_is_power_of_2<unsigned int, 16>::m_result;
    ret += static_is_power_of_2<unsigned long, 16>::m_result;
    ret += static_number_is_power_of_2<16>::m_result;
    else
    ret += static_is_power_of_2<unsigned short, 17>::m_result;
    ret += static_is_power_of_2<unsigned int, 17>::m_result;
    ret += static_is_power_of_2<unsigned long, 17>::m_result;
    ret += static_number_is_power_of_2<17>::m_result;
    return ret;
    Compiation:
    @ CC -m32 foo5.cpp
    // No problem
    @ CC -m64 foo5.cpp
    "foo5.cpp", line 20: Error: An integer constant expression is required here.
    "foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
    "foo5.cpp", line 36: Where: Specialized in non-template code.
    "foo5.cpp", line 26: Error: An integer constant expression is required here.
    "foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
    "foo5.cpp", line 37: Where: Specialized in non-template code.
    "foo5.cpp", line 20: Error: An integer constant expression is required here.
    "foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
    "foo5.cpp", line 43: Where: Specialized in non-template code.
    "foo5.cpp", line 26: Error: An integer constant expression is required here.
    "foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
    "foo5.cpp", line 44: Where: Specialized in non-template code.
    4 Error(s) detected.
    Predefined macro:
    @ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
    @ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
    @ diff log32 log64
    7c7
    < #define __TIME__ "09:24:58"
    #define __TIME__ "09:25:38"20c20
    < #define __sparcv8plus 1
    #define __sparcv9 1[snipped]
    =========================
    What is wrong?
    Thanks,
    Alex Vinokur

    Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
    If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
    Otherwise, you can check for new patches from time to time at
    [http://developers.sun.com/sunstudio/downloads/patches/]
    and see whether this bug is listed as fixed.

  • Pro*Cobol PCO Compilation problem in Linux

    Hi,
    DB :oracle 11g on RHEL 5.5
    when we are compiling the (Pro*cobol ) PCO code it is giving us the error :
    System default option values taken from: /oracle/oracle11g/app/product/11.2.0/dbhome_1/precomp/admin/pcbcfg.cfg
    Error at line 320, column 35 in file BR2385.PCO
    WHERE A.SOC_NO = :PARAM-SOC
    ..................................1
    PCB-S-00223, Undeclared variable "PARAM-SOC".
    when we change the pcbcfg.cfg file with flag : declare_section=no it's compile without error.
    But in this scenario cobol app doesn't run.
    if we declare the undeclared variable in the section
    EXEC SQL BEGIN DECLARE SECTION END-EXEC.
    PARAM-SOC PIC X(25).
    EXEC SQL END DECLARE SECTION END-EXEC.
    and compile it with declare_section=yes then cobol app. run fine.
    Are different files generated (cob,int,gnt) after compilation with the option declare_section=no and declare_section=yes.
    Pls help us in this regards. we have lot of file which having these issue and we don't want to do manual changes "EXEC SQL BEGIN" in it.
    Thanks in advance..

    Your code is faulty and has to be fixed.
    No compilation problem is present, the compiler correctly barfs.
    As this is not a support forum, kindly keep your non-issues out of this forum.
    Thank you!!!
    Sybrand Bakker
    Senior Oracle DBA

  • Occi::Number compilation problem in Linux

    Hi,
    I got following error when I complile my application which uses OCCI (Oracle C++ Call Interface) shiped with Oracle 9.2. I added the compiler flag -Dlint .
    When I dont add the compiler flag I dont get following error. My machine is running RedHat linux 7.3
    /usr/bin/g++ -c -I/opt/ora9/product/9.2/rdbms/demo -I/opt/ora9/product/9.2/rdbms/public -I/opt/ora9/product/9.2/plsql/public -I/opt/ora9/product/9.2/network/public myapp.cpp -g -Wall -DLiS -Dlint -DORACLE -I../include -DQT_THREAD_SUPPORT
    In file included from /opt/ora9/product/9.2/rdbms/demo/occi.h:40,
    from ../include/DatabaseSupport.h:17,
    from myapp.cpp:4:
    /opt/ora9/product/9.2/rdbms/demo/occiData.h:374: `oracle::occi::Number::Number (char)' has already been
    declared in `oracle::occi::Number'
    /opt/ora9/product/9.2/rdbms/demo/occiData.h:408: `oracle::occi::Number::operator char () const' has
    already been declared in `oracle::occi::Number'
    If I dont compile my application with -Dlint compiler flag I cant run the application.
    I think this is a bug in occi::Number class
    Any solusion??
    Thanking in advance
    nkran

    Your code is faulty and has to be fixed.
    No compilation problem is present, the compiler correctly barfs.
    As this is not a support forum, kindly keep your non-issues out of this forum.
    Thank you!!!
    Sybrand Bakker
    Senior Oracle DBA

  • Before Update Trigger compilation problem

    Hello experts! I have a compilation problem for a trigger I am trying to create.
    As a matter of fact it should update INT_INITIAL with the old value of INT_LOCK.
    The compilation fails and the debugger raises an ORA 01747 error (invalid declaration for user table, user column etc.)
    Do you have an idea what is wrong with my code?
    create or replace
    TRIGGER TRIGGER_INT_INITIAL
    BEFORE UPDATE ON  TBL_MATRIX_INTERMEDIATE_RESULT
    FOR EACH ROW
    Begin
      IF NVL(:new.INT_INITIAL, 0) != :old.INT_LOCK THEN
           UPDATE TBL_MATRIX_INTERMEDIATE_RESULT set
          :NEW.INT_INITIAL = :old.INT_LOCK;
      END IF;
    END;Regards,
    Seb

    Hi Seb,
    You don't need to use UPDATE stmt here as you are updating the same table on which your trigger is fired. So it may cause mutating table error too.
    when you use :new.colname it will immediately take care of the new value to be inserted in the respective column.
    So no need to write Update stmt.
    Hence remove,
    UPDATE TBL_MATRIX_INTERMEDIATE_RESULT set And use := is an assignment operator whereas = is to equate..
    :=Twinkle

Maybe you are looking for