Source directory doesn't exist

Hi experts,
my scenario is file to proxy..
i am developed end to end scenario......
i am using TP is NFS.... & also used as ICO configuration
while checking in RWB it will give error like source directory does not exist..
see the fallowing screenshot..
The source directory is fine.............but i am getting the error source directory does not exist...
please help me on this...where is exactly problem occurs?(source directory is fine)
Thanks & Regards
E.Ravi Chandra Reddy

Hi Raja,
please find below screen shot of corresponding CC..
Thanks & Regards
E.Ravi chandra reddy

Similar Messages

'Source Directory doesn't exist' error in sender file adapter

Hi All,
I m getting the error 'Source Directory doesn't exist' in sender file adapter.
The source file directory doesn't exist in XI Server. Its in a different system.
gone through other sdn t hreads.
the options seems to be
1. either to mount the Source Directory on the XI Server.
2. Install a FTP server and use FTP protocol.
My doubt is that, could nt we give necessary access rights to the XIAFUSER whihc will access the Source Directory?
Wont it be sufficient?

Hi Aarthi,
If you are using system other than XI, then you have to use FTP server
else check you have proper authorization of read/write to the source directory...
and check the name of it as well, as it is case sensetive and you have provided the proper details of server.
check these blog as well...
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Sachin
Edited by: Sachin Dhingra on Mar 24, 2009 12:16 PM

CD drive problems "Directory doesn't exist"

Seems like everybody has some variant of this problem. I'm having difficulty getting the CD drive to read the disks I put in. I'm using PCman as my file manager and when I try to access the CD drive I get a pair of error messages that simply say "..." This is followed by a third error saying "Directory doesn't exist." My HAL is configured for hotplugging if that matters.
I've been wrestling with this for a couple days and tried several solutions from both the wiki and the forum. Any help with fixing, or just suggestions on how to better diagnose the problem would be much appreciated.

I had this problem using hal, Slim, openbox and pcmanfm. Solved it using this post
http://bbs.archlinux.org/viewtopic.php?id=65070
which I found in the Wiki/Table of Contents/Hardware Detection & Troubleshooting/Hal/Permission Denied page.
I only had to follow the two steps in the PS, after which I could access cd's as normal user.
Hope this helps.

Build error 'CFURLGetFSRef failed - maybe the output directory doesn't exist?' Eclipse

I downloaded and installed the Adobe InDesign Plug-in Editor as an Eclipse distribution, the InDesign SDK and XCode on my iBook G4 with Mac OS X 10.4.10. Creating an InDesign project works fine. I only have to drag-and-drop elements on a form and add some actions.
Unfortunately, I can't get the Ant Build working. I followed the video-tutorials on the Adobe labs site, but I'm still getting this error:
CFURLGetFSRef failed - maybe the output directory doesn't exist?
The error seems to be in the "/Adobe InDesign CS3 Products SDK/devtools/bin/odfrc-cmd" file. I guess it's a SDK problem.
Does anyone know what the reason is for this error? And maybe how I can fix it?

This is the full output.
"Ld "/id5sdk/build/mac/prj/build/InDesign en InCopy plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign and InCopy plug-in" normal ppc
cd /id5sdk/build/mac/prj
/usr/bin/g++-4.0 -o /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in -L/id5sdk/build/mac/prj/../debug/sdk -L../../../build/mac/debug/packagefolder/contents/macos/libs -F/id5sdk/build/mac/prj/../debug/sdk -F../../../build/mac/debug/packagefolder/contents/macos -F../../../build/mac/debug/packagefolder/contents/Frameworks -filelist /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in.LinkFileList -lPublicPlugIn -framework InDesignModelAndUI -framework Carbon -framework InDesign\ and\ InCopy\ plug-in -arch ppc -Wl,-single_module -install_name InDesign\ and\ InCopy\ plug-in.InDesignPlugin/Versions/A/InDesign\ and\ InCopy\ plug-in -Wl,-Y,1455 -dynamiclib -mmacosx-version-min=10.4 -Wl,-Sp -Wl,-executable_path -Wl,../../../build/mac/Debug/packagefolder/contents/macos -isysroot /Developer/SDKs/MacOSX10.4u.sdk
ld: can't locate framework for: -framework InDesign en InCopy plug-in
/usr/bin/libtool: internal link edit command failed"
Anyone who can help me?

Directory doesn't exist

Hi,
     I am using 11i application on 9i database. I tried to run autoconfig on the apps tier. I navigate to COMMON_TOP/admin/scripts/bdev_oraapps
and ran auto config
[applpdev@ebs pdev_oraapps]$ ./adautocfg.sh   after entering the password it show's the error Error:Directory doesn't exist.
I don't know what's the cause. Please help to get through this.

The oraInst.loc file contains the entry "inventory_loc=/home/orapdev/oraInventory"
I checked the above mentioned location and i issued
[applpdev@oraapps ~]$ cd /home/orapdev/
[applpdev@oraapps orapdev]$ ll
total 4
drwxrwxrwx 6 orapdev orapdev 4096 Nov 26 16:27 oraInventory
[applpdev@oraapps orapdev]$ cd oraInventory/
[applpdev@oraapps oraInventory]$ ll
total 20
drwxrwxrwx 2 orapdev orapdev 4096 Nov 26 16:47 Contents
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 ContentsXML
-rwxrwxrwx 1 orapdev orapdev   19 Nov 30 20:21 install.platform
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 locks
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 logs
The error showed when running the auto config is
[applpdev@oraapps pdev_oraapps]$ pwd
/pdev/p01/oracle/pixcomn/admin/scripts/pdev_oraapps
[applpdev@oraapps pdev_oraapps]$ ./adautocfg.sh
Enter the APPS user password:
ERROR: Directory doesn't exist
[applpdev@oraapps pdev_oraapps]$

File Adapter to iSeries IFS "Configured source directory does not exist"

Good day, All
We are using PI 7.1
I need the PI file adapter to pull a file off of an iSeries(AS400) IFS folder directory.
I'm able to configure the file adapter to pull off files from the PI server C and D drives.
I'm able to configure the file adapter to pull off files from other network drives.
But the iSeries IFS folder keeps coming back "does not exist".
I've configured the Source Directory with / and with \ and it doesn't help.
I am able to navigate to the folder while logged into the PI server as the server admin.
I've tried mapping a drive on the server to the IFS folder but that doesn't work either.
Please help!!!
I've wasted too much time trying different settings on this already.
Any assistance would be greatly appreciated.
Thanks,
Chad

Dear Chad,
Please go through the following SDN link :
- Configured source directory .... does not exist was suppressed
give the write permisson to the directory for everyone group and check if that helps.
Also, kindly go through the following links :
1) http://wiki.sdn.sap.com/wiki/display/XI/TroubleshootingtheFile+Adapter (point 2)
2) Not able to read files from Windows directory to Unix Server using NFS
which might give some hints in solving your issue.
Best Regards
Nishwanth

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

Configured source directory does not exist

Hi Guys,
I had configured a sender file adapter and when i check the CC monitoring it gives the message : Configured source directory '/usr/sap/NRD/SYS/global' does not exist. But the directory is in the AL11 of R/3 application server. Iam using the NFS in the File Adapter Communication channel.
Can anyone throw some light reagrding the error.
Thanks,
Kittu.

Kittu,
1. With NFS , XI server can acccess only folders available on its OWN local path. It cannot access the Path of your R3 machine. The XI server is looking for the path on its own directories and it is not finding the same.
One option is to mount your Drive on the XI server to some folder. Not something I
would recommend thought.
2. The better thing to do would be,
a) place the file on the XI 's some folder ( you would need a local directory access to the server) or some program to upload the file to the server.
b ) Use FTP. Look into this blog by Shabrish for how to set up a FTP ion your Local Desktop and make XI access the same,
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Regards
Bhavesh

Where do I place third party plug folders for effects in Final Cut 10.1 under Mavericks? The /user/library/application support/final cut directory doesn't exist on my computer.

I can't seem to find the proper directory to copy third pary plugins for use under Final Cut 10.1. The ../library/appliation support/final cut pro directory doesn't seem to exist. Where do I put these files?

Um - they didn't go there with 10.0.x either. All the effects, titles, transitions, and generators in FCP X are Motion templates and get placed in user/movies/motion templates, into the appropriate folder depending on the type of effect.

Why is my Firefox Aurora seems to be located in Program Files (x86)\Aurora\updated\firefox.exe, but that directory doesn't exist on my computer?

I'm using FusionDisplay to get a taskbar for my second monitor, and the taskbar has worked well until now. Now when I open pinned Aurora, it opens a new application and doesn't merge with the pinned down application icon.
It seems to locate the Firefox.exe to Program Files (x86)\Aurora\updated\firefox.exe, which doesn't exist. Also windows task manager right click menu for firefox.exe won't open anything when I click Open File Location.

Hi. I'm having the same problem with Final versions of Mozilla applications (FF and TB) on Win7 x64 as well. I don't have Display Fusion or the likes.
This started around FF15, and happens about every other update since. This is Very frustrating. Restarting the computer fixes it though. I'd never believe I'd have to restart the computer after pretty much about every update, major or minor. Now this happened to me for both FF19->19.02, and TB 17.0.3->17.0.4 at the same time. No other software running meanwhile.
This happens for about the 3 or 4th time. It's frustrating to have to restart every now and then for a browser update.
I'll stick to a version for both (19.0.2 and 17.0.4) forever, thanks Mozilla! Couple that with the inability of most versions of TB to sustain a longer uptime than 10-15 days with no addons and just 4 pop accounts with 50-100 emails and just one with 1000.

11i Class directory Doesn't exists in R12

Hi,
We did lot of customizations in 11i files. Most of the files are referring to the location oracle.apps.per.irc.lov.webui in 11i. But this path doesn't exists in R12 and the customizations are failing in R12 as the class files doesn't exists in that path. Instead of that path R12 has the path oracle.apps.irc.lov.webui
How does Oracle fix this issue. Does it provide any patch to fix the issue or do we need to correct all the customizations to refer the new path.
Thanks,
HC.

HC,
In general the answer is YES. But it is more complicated than that. If the entire query changed, then your substitution may not be right. It will substitute but not be right. You need to evaluate all customizations on an individual basis in regards to the assumptions from 11i and changes in R12. Sorry but there is no magic bullet to make them all work for R12 in one fell swoop.
Kristofer Cruz

'A file or directory doesn't exist' error during java stack update

Dear All,
I've done a fresh installation of solution manger system on IBM iseries box (OS400 & DB2 combo).
As part of post installation activity, I've updated the kernel patch, updated the ABAP stack to sp4, and am currently doing the java stack update.
I'm struck with one error. The log file shows:
Feb 23, 2012 7:54:35 PM Error: /usr/sap/SLM/SYS/global/j2eeclient/META-INF/SAP_MANIFEST.MF (A file or directory in the path name does not exist.)
Feb 23, 2012 7:54:35 PM Error: Error deploying Fileset Complete to /usr/sap/SLM/SYS/global/j2eeclient
Feb 23, 2012 7:54:35 PM Info: ***** End of File-System Deployment com.sap.engine.client *****
Feb 23, 2012 7:54:35 PM Error: Aborted: development component 'com.sap.engine.client'/'sap.com'/'SAP AG'/'7.0209.20110628100654.0000'/'1', grouped by :
Deployment was not successful
I've checked the file system and found that the directory META-INF is not present in /../../global/j2eeclient
Please suggest a solution.
Thank You.
regards,
vin

Hi,
This is an easy solution:
From the OS command line, do WRKLNK, go to /usr/sap/SLMS/global/j2eeclient, at the top where it shows the directory, do a copy on this. Then at the command line type MD, do F4, paste the directory name in the first line, then after j2eeclient add /META-INF'
IMportant*** Make sure the full directory name is in single quotes.*
*On the next 2 lines change INDIR to RWX. Then press enter and re-run your job. If you have any problems let me know.

Distribution manager failed to process package - the source directory does not exist

Hi,
I have the following behaviour:
A Software Update Deployment Package is not distributing because of the following error:
I have found the following query (http://blogs.technet.com/b/ken_brumfield/archive/2013/01/10/troubleshooting-sccm-software-update-deployment-package-distribution-due-to-missing-directories.aspx) to
determine which update is missing.
It is about update KB978601. If we search this update in the console, we see this:
The update is not required, not downloaded, not deployed and superseeded.
If we look into the members of the Update deployment package, we can't find this update.
When I was digging into the database, I found this:
SELECT
distinct cp.Content_ID,
cp.ContentSubFolder,cp.PkgID,
con.ContentProvisioned
FROM
[dbo].[vCI_ContentPackages] cp
INNER
JOIN [dbo].[CI_ConfigurationItemContents]cic
ON cp.Content_ID
= cic.Content_ID
inner
join dbo.v_CIContents_All
con on con.Content_ID
= cp.Content_ID
where cp.PkgID
=
'XXX002BA'
and cp.ContentSubFolder
=
'39b46f0a-7244-48a6-b795-119ac74009f9'
which resulted in:
Content_ID ContentSubFolder PkgID ContentProvisioned
16828355 39b46f0a-7244-48a6-b795-119ac74009f9 BP1002BA 1
I found the "ContentProvisioned = 1 " a little bit strange.
So, my question is:
Why SCCM is thinking of distributing the content although it is not downloaded or deployed and how can we fix this?
Has it something todo with the "ContentProvisioned" or is it something else?
Thanks,
Sem

I can tell you why CM wants to distribute it, but the easiest way would be downloading that patch thus adding it to the package (so that it can be distributed) and remove it afterwards.
Torsten Meringer | http://www.mssccmfaq.de

Directory doesn't really exist - linked to another

I have discovered a weird issue with my Lightroom catalog that, unfortunately, may have resulted in me inadvertently deleting some images. Some folders in the Folders pane are somehow "linked" for the lack of a better term. For example, I have the following two folders:
2006_04_29
2006-04-29
I'm trying to clean up my catalog so I've been moving/renaming (through Lightroom) to fix the issue. The weird thing is if I open an image in 2006_04_29 and look at the system file info, it shows it actually lives in 2006-04-29. Unfortunately, this is after I deleted a dozen or so folders.
I'm not sure if this may have happened back in the Lightroom 2/3 days before I knew not to move things outside of Lightroom, but I'm surprised the catalog optimization or synchronization both didn't fix it.
Any thoughts or suggestions?
Thanks,
Kevin

The oraInst.loc file contains the entry "inventory_loc=/home/orapdev/oraInventory"
I checked the above mentioned location and i issued
[applpdev@oraapps ~]$ cd /home/orapdev/
[applpdev@oraapps orapdev]$ ll
total 4
drwxrwxrwx 6 orapdev orapdev 4096 Nov 26 16:27 oraInventory
[applpdev@oraapps orapdev]$ cd oraInventory/
[applpdev@oraapps oraInventory]$ ll
total 20
drwxrwxrwx 2 orapdev orapdev 4096 Nov 26 16:47 Contents
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 ContentsXML
-rwxrwxrwx 1 orapdev orapdev 19 Nov 30 20:21 install.platform
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 locks
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 logs
The error showed when running the auto config is
[applpdev@oraapps pdev_oraapps]$ pwd
/pdev/p01/oracle/pixcomn/admin/scripts/pdev_oraapps
[applpdev@oraapps pdev_oraapps]$ ./adautocfg.sh
Enter the APPS user password:
ERROR: Directory doesn't exist
[applpdev@oraapps pdev_oraapps]$

C:\programdata\apple computer\installer cache doesn't exist

I can't uninstall or upgrade QuickTime. The installer alerts with "Error getting file security: C:\ProgramData\Apple Computer\ GetLastError: 5".
The C:\ProgramData\ directory doesn't exist on my system (Win 7 Prof 64 bit on Dell laptop).
How can I get this program uninstalled and/or upgraded?
Thanks

It will most likely be there. (It's hidden by default on a Windows Vista or 7 system.)
The 5 suggests either permissions trouble or file damage. Perhaps let's first try checking on disk damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Source directory doesn't exist

Similar Messages

Maybe you are looking for