Source Directory same in FIle to IDOC

Hi Friends
Can we have a same File Name and same Source Directory for 2 different scenarios?
Means in my communication channel i am putting
this
Source Directory : /POS/input/test
File Name: *.DAT
for one let us say ABC file to xyz-iDOC scenario
and same Source directory and same file name for
another scenario say hgf file to uio-iDOC scenario
Will it work or do i have to change the name of the file or something?
Please guide
Thanks

Swarup,
I've some doubts.
>It will definately work provided you have not marked any action such as archive or delete file after processing in sender communication channel.
Ok, I agree to this point. If you give TEST mode then obviously it will work. Provided there is atleast some time gap between these communication channels polling time. For example Channel1 Polling time 60 seconds, Channel2 Polling time 60 seconds. For example if he activate the first channel at 10:00:00 AM, then he need to activate the other channel 10:00:30 AM( hh:mm:ss). But I always need to make sure, re-activating again it's big pain we need to check at what time the first channel is activated based on that u need to re-activate the next.
>If suppose you need to use the file for both scenarios then you could even use the common sender communication channel also.
Is it, are u sure? So u mean the same comm.channel can be assigned to different scenarios also is it? I mean for two diff.O/B Interface you can create two diff.sender agreements with same channele? Can you try this and let me know?
raj.

Similar Messages

Source directory (xyz. text) file needsto be placed inthe Target directory

Hi Experts,
There is a file in the source directory (xyz. text) and I need to place the same file in the
Target Directory (xyz. text) without any message transformation. How to get it using XI?
Points will be awarded ...........
Thanks,
Manoj

Hi Manoj,
You can do it without touching IR. you just need to configure the scenario in ID.
you need to do the following:
1. Create service, and two File Communication channels.
2. reciver determnation, put that service and any interfcae and namespace.
3. Interface Determination: Put Inbound Interface SAME AS you specified in Receiver Determination.
After all this you can test your scenario.

I want to Pick the Single file from The source Directory

Hi,
My Scenario is File to RFC .. I'm getting the files in the source Directory.. File names are SENDER_(TIMESTAP).XML .. but the problem is... When ever Files are available in the Source Directory Immediately XI was picking all the files at a time.. But I want to to Pick a single file at a time..
for Making this what we have to do.. After Processing the first file then only my Sender adapter should pick the next file... (even though Multiple files are available in my Source Directory)
Regards
Jain

Hi,
the other option was use Adapter specific attributes in the Sender Communication channel..
or
while droping the files ask them to drop using time stamp in another directory and an external validation is required .. and after validation push single file to Source directory using batch file..
i.e use a batch file using run time operating system or make that batch file to run at OS level ..
where the batch files needs to validate the time interval of the file and needs to push a single file to the source directory.. where from there we can directly pick a single file and process..
regards,
Kishore

Source directory of file adapter

Hi.
I want to use windows share directory as source directory of sender files adapter.
So we need set the path UNC name.
for example.
<hostname>\d:\sourcedirectoy
Does this setting is supported?
And are there any problem?
regards,

>>I want to use windows share directory as source directory of sender files adapter.
Expose the Windows directory as an FTP server.
Along came a File Adapter, Mr. 'FTP' and Rest of the Gang By Shabarish Vijayakumar
Thanks
SaNv...

IDOC to EDI file scenario and EDI file to IDOC scenario without Seeburger

Hi All,
IDOC (Invoice) to EDI file scenario without Seeburger
Pls let me know if anybody have blogs for the same
EDI file to IDOC (Orders) scenario without Seeburger
Pls let me know if anybody have blogs for the same
Regards

Hi Rachit,
>>Can anybody send me blogs to convert IDoc structure to EDI or EDI to IDoc structure using Conversion Agent or using JAVA Mappings.
Using conversion Agent there is no coding, If you have a conversion agent insatlled in your landscape you will have better understanding..
Also java code for IDoc to EDI have some problems:
1. The EDI format differs based on requirement so there will always be a customized code for it.. Like we have IDco to EDIFACT and ANSX12...
2. Because most of these codes are propriety materials I doubt whether anyone be sharing the complete code here in SDN. Better to have a java consultant at your end and put him with your requirement.. From the reply in above threads you should be clear that what you are looking for can be done from java coding..
All the best
Regards
Suraj

Distribution Manager Failed To Access The Source Directory

Hello All,
I have this issue distributing content to my Distribution Points for months now. I keep running into this error below:
Distribution Manager Failed to Access the source directory (\\share\folder\file.wim)
Possible Cause: Distribution Manager does not have sufficient rights to the source directory.
Solution: Verify that the site server computer account has at least Read access to the directory you specify as the source directory.
Possible Cause: There is not enough disk space available on the site server.
Solution: Verify that there is enough free disk space available on the site server.
I checked the distmgr.log file and received these messages:
GetTempFileNameA failed; 0x80004005   SMS_DISTRIBUTION_MANAGER   3/24/2015 2:15:38 PM   13952 (0x3680)
CFileLibrary::AddFile failed; 0x80004005   SMS_DISTRIBUTION_MANAGER   3/24/2015 2:15:38 PM   13952 (0x3680)
CContentDefinition::AddFile failed; 0x80004005   SMS_DISTRIBUTION_MANAGER   3/24/2015 2:15:38 PM   13952 (0x3680)
Failed to add the file. Please check if this file exists.   SMS_DISTRIBUTION_MANAGER   3/24/2015 2:15:38 PM   13952 (0x3680)
SnapshotPackage() failed. Error = 0x80004005   SMS_DISTRIBUTION_MANAGER   3/24/2015 2:15:38 PM   13952 (0x3680)
Failed to take snapshot of package CSU0006A   SMS_DISTRIBUTION_MANAGER   3/24/2015 2:15:38 PM   13952 (0x3680)
There is enough space on the site server and the site server has full control over the source directory. I wish I can give you more information but I'm hoping this is enough info to get some assistance. If more information is needed please let me know!

We usually give the DP's computer account and the site server computer account read access to these shares in our environment.
... which is not enough for drivers and updates (as there will also files be added).
Torsten Meringer | http://www.mssccmfaq.de
... And for capture Image too if your capture destination points on that share

File Sender Adapter - Multiple Source Directory

Hi all,
I have the following file to IDoc Scenaraio:
The source file might be in any of 3 directories in source system and so created file sender adapter as follows:
File access parameters:
Source Directory : Directory1
File Name         : Filename*.XML
Addiontal Directory:
Directory2    Filename*.XML
Directory3    Filename*.XML
The porblem we are facing is the file adapter is picking the file from Directory1& 2 and not from Directory3.
If the change Directory Order in adapter as follows:
File access parameters:
Source Directory : Directory3
File Name         : Filename*.XML
Addiontal Directory:
Directory2    Filename*.XML
Directory1    Filename*.XML
... then file from Directory 2 & 3 is getting processed and not from Directory1.
Any thoughts on this will be greatly appreciated.
Thanks
Sarat.

Why use BPM for this?
Instead write an abap program to pick from any of 3 directories in source directory and place it in the shared XI folder and configure your file adapter pointing to XI shared folder...shecdule the abap report for every 5 min..
Wanna know more /people/sravya.talanki2/blog/2005/08/23/sender-xi-ftp-adapter-with-regular-path-expression-150-abap
Or write OS level scripts for doing same.

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

'Source Directory doesn't exist' error in sender file adapter

Hi All,
I m getting the error 'Source Directory doesn't exist' in sender file adapter.
The source file directory doesn't exist in XI Server. Its in a different system.
gone through other sdn t hreads.
the options seems to be
1. either to mount the Source Directory on the XI Server.
2. Install a FTP server and use FTP protocol.
My doubt is that, could nt we give necessary access rights to the XIAFUSER whihc will access the Source Directory?
Wont it be sufficient?

Hi Aarthi,
If you are using system other than XI, then you have to use FTP server
else check you have proper authorization of read/write to the source directory...
and check the name of it as well, as it is case sensetive and you have provided the proper details of server.
check these blog as well...
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Sachin
Edited by: Sachin Dhingra on Mar 24, 2009 12:16 PM

Copying files from same directory as *.java files and moving to WEB-INF/classes/ package name

In our current application we have the following source directory structure:
          src -
          - com
          - edeploy
          - subdirs ... (many directories here)
          - jsp
          -subdirs ... (many directories here)
          In com.edeploy.subdirs, there exists *.java files, and *.gxq files (query
          files). I would like to modify my build.cmd script to copy the *.gxq files
          into the same directory as the class files.
          Here's my script so far:
          @REM Create list of files to compile
          DIR /S /B /A:-D src\com\*.java >class.list
          @REM Create list of query files
          DIR /S /B /A:-D src\com\*.gxq >query.list
          @REM Compile
          javac -d stage\WEB-INF\classes @class.list
          @REM Copy query files into class directory
          .......... code needed here ......
          Can anyone help me with this?
          Thanks,
          Matt


You may want to check out:
          http://jakarta.apache.org/ant/index.html
          Gary
          "Matt Raible" <[email protected]> wrote in message
          news:[email protected]..
          > In our current application we have the following source directory
          structure:
          >
          > src -
          > - com
          > - edeploy
          > - subdirs ... (many directories here)
          > - jsp
          > -subdirs ... (many directories here)
          >
          >
          > In com.edeploy.subdirs, there exists *.java files, and *.gxq files (query
          > files). I would like to modify my build.cmd script to copy the *.gxq
          files
          > into the same directory as the class files.
          >
          > Here's my script so far:
          >
          > @REM Create list of files to compile
          > DIR /S /B /A:-D src\com\*.java >class.list
          >
          > @REM Create list of query files
          > DIR /S /B /A:-D src\com\*.gxq >query.list
          >
          > @REM Compile
          > javac -d stage\WEB-INF\classes @class.list
          >
          > @REM Copy query files into class directory
          > .......... code needed here ......
          >
          > Can anyone help me with this?
          >
          > Thanks,
          >
          > Matt
          >
          >

Dynamically construct Target/Source Directory in File Adapter

Hi All,
Is it possible to Dynamically construct target/Source Directory in File Adapter? If yes can anyone plz provide details about the same.
regards
Vinay

Hi vinay,
have a look @ these threads..u may get some help!!
Re: Dynamic directory name in Receiving File adapter
Dynamic FileName and Directory - UDF
Re: Dynamic Directory and File Naming in Receiver Adapter
Re: target directory in file adapter
Regards
BILL

Renaming the file in the Source Directory

Hi ,
I have a scenario where the file is left in the source directory after sending it to XI for processing. In order to exclude the file from next polling onwards , the file needs to be replaced . I know the solution is possible through Archiving or OS Command (which are not possible in my project)....Please let me know the feasibility through adapter module(if possible ,sample code pls) or any other solution ?
Thanks in advance
Edited by: chitra l on Aug 12, 2009 12:09 PM

Chitra,
Why do you want to go to the hardest route when you have a standard and simple route. The hardest would be to write an adapter module. The simplest way would be simply read the file and send it to the same folder with a different name. You dont need to do anything in IR also.
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Regards,
---Satish

Does anyone know how to load a file from the source directory?

I have a Photoshop panel that uses the Texturizer function. I would like to use the images in the src images directory of the project. I need to reference the /src/images directory of the panel when the project is running.
Does anyone know how to access the source directory using action script?
I have tried a number of options but only seems to work if I hard code a location
public static function Mat02(): void
// Works
var myTexture:File = new File("C:\\Users\\Ed\\Adobe Flash Builder 4.6\\LayoutBuilderSuite\\src\\images\\mat 02.psd");
// Tried - no luck
//          var file = File.applicationStorageDirectory.resolvePath("mat 02.psd");
//          var file:File = File.applicationDirectory.resolvePath("mat 02.psd");
//var file:File = File.applicationStorageDirectory;
//file = file.resolvePath("mat 02.psd");
//var myTexture:File = File.applicationDirectory.resolvePath("mat 02.psd");
//var myTexture:File = File.documentsDirectory.resolvePath("mat 02.psd");
          var desc5:ActionDescriptor = new ActionDescriptor();
          desc5.putEnumerated( app.charIDToTypeID( "GEfk" ), app.charIDToTypeID( "GEft" ), app.charIDToTypeID( "Txtz" ) );
          desc5.putPath( app.charIDToTypeID( "TxtT" ),   myTexture );
          desc5.putInteger( app.charIDToTypeID( "Scln" ), 150 );
          desc5.putInteger( app.charIDToTypeID( "Rlf " ), 4 );
          desc5.putEnumerated( app.charIDToTypeID( "LghD" ), app.charIDToTypeID( "LghD" ), app.charIDToTypeID( "LDBR" ) );
          desc5.putBoolean( app.charIDToTypeID( "InvT" ), false );
          app.executeAction( app.charIDToTypeID( "GEfc" ), desc5, DialogModes.NO );
Thanks

I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?

File Adapter Source Directory

I have set up a File Adapter comms channel that should be picking up a file from the XI SAP system directory path F:\usr\sap\temp.
I place a file in that directory and can see it via SAP transx AL11.
However my comms channel is not picking up the file so my process does not start. I had previously been using a FTP File Adapter and that was working fine. So I know my other configuration is correct. I now needed to testing something use just the plain File Adapter.
The RunTime Cache has been refreshed and I can see my CC via SXI_CACHE.
Here is what I have entered into the File Sender Adapter
Transport Protocol : File
Message Protocol : File
Adapter Engine : Integration Server
Source directory : F:\usr\sap\temp
File Name : MYFILE.XML
Processing Options :
QAS : EO
Poll Interval 60s
Processing Mode : Delete
Processing Seq : By Name
File Type : Binary
Adapter Status : ACTIVE

Hi
check the following things
first select ur message protocol as "NFS". save the changes and activate the channel.
if still not work go to the communication channel monitoring using the path
runtime work bench->compnent monitoring->dispaly->adapter ebngine->communication channel monitoring--->enter ur channel name and click on use filer button.
and check whether the channel is started or stopped.
if stopped start the channel and the try.
if u still face the problem please reply me back.
Thanks
Rinku

NFS Sender File Adapter Source Directory

Hello everybody,
I have the next problem cause company politics I can't put some files that I need in the XI Server, so I sould take them from another server directory, and cause compañy politics too I can't use FTP so I need to use NFS, but I've been reading some threads about it and some of them says I can't do it and some of them says that I can do it and even give come paths, now the file system is in a Unix Server, how can I do this????? should I put the server an path direclty in de cc or should I map the directory and how do I do this, any help would be appreciated, thanks in advance.
Regards,
Julio

Hello Julio,
If your lacation is as follows:
server01\path1\path2
Then put *
server01\path1\path2* as your source directory.
Important
For Linux ensure that the <sid>adm user can access the specific location.
For Windows ensure that the sapservice<sid> user can access the specific location. (Will probably have to be on the domain to achieve this).
Regards,
Yaghya

Source Directory same in FIle to IDOC

Similar Messages

Maybe you are looking for