Source file for MSR

Hi All,
I m working on a PoC for MSR.I have downloaded the .war file for the same but i dnt have the source file for it.Where can i find the source code to change the customization.
Suggest some help.
Thx n Regards
Priyanka

Hi,
well, no, this is the only official way to do so. But if you have the WAR file - you should get the java files from the same destination.
Unfortunately you have to buy the product from SAP first to be allowed to download it from the destination in servicemarketpkace.
Regards,
Oliver

Similar Messages

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

PSD source file for animated GIF's - Fireworks CS3

hi
i've upgraded to Web Premium Suite CS3.
Q: i have several PSD source file for animated GIF's created
with ImageReday.
how can i open/iomport/convert it in/to Fireworks CS3 without
looing the "animation"
many thanks
Ueli

ugisiger wrote:
> hi
> no any extras. simply 5 layers "distributed" on the
timeline.
> if i open a "animated" psd, so i get a file with the
layers and one frame, but
> loosing animation stuff like "when show witch layer an
for how long"
> -> there is no conversion to FW frames.
>
> Ueli
>
I don't do animations in PS or IR, but if you like, send me
the file
and I'll see if I can figure something out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

Example of a source file for Creating general maintenance task list

Hi SAP Gurus,
I need to create general maintenance task list from a source file. Reading forums i found that it is possible by using LSMW, with object 0490 and method 0000.
However, I don't know how to associate structure IBIPTLST, IBITLOP and IBIPMAT. When i assign individual source files for each structure, and I execute LSMW, a problem appears indicating that IBITLOP don't have all the required fields from the list header.
This is the structure propose by SAP in standar programa IBIP.
Structure - IBIPTLST     Task list header
|-->> IBIPTEXT (see comment below)
   |-->> IBIPTLOP   Operations
|       |-->> IBIPTEXT (see comment below)
   |       |-->> IBIPTMAT Material for one operation
   |       |-->> IBIPPRTS Production resources/tools (PRT
   |                   |-->> LONGTEXT (see comment below)
   |       |--> IBIPMPAC Maintenance packages (up to 32)
   |--->> IBIPBDCD (see comment below) from operation overview
In other forums, a possible solution is to define an unique source file, that is proposed by LSMW, but i don't know how to obtain this template.
Can you send me an excel example of how to define de input file or the steps I have to follow in order to execute an LSMW or the standard transaction IBIP?.
My e-mail is [email protected]
I have read all the SAP documentation, what i really need is an example.
Thanks a lot
Andrés.

solved

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Edit Source Files For Skins?

One of our programmers has asked about the possibility of editing the tab index for the skin on the Captivate demos I'm producing. Apparently, the stock playback skins don't meet our accessibility standards as tightly as he'd like. Anyway, I've found a folder in the Captivate 3 program folder called "Templates", within which is another folder called "PlaybackFLA" that contains what appear to be the Flash source files for the skins. The names of these Flash files correspond to the names of the skins in the dropdown menu, so I assume these are the ones.
I opened one in Flash and it was clearly the same playback controls used in my demo, so as a test I changed the button colors and saved it in the same folder under a different file name. However, when I launched Captivate and looked for my new skin in the drop down menu it wasn't listed. Now I'm confused. Can anyone tell me why my altered skin Flash files don't appear with the others? Any help would be welcome.
Thanks!

Hi there
Did you close and restart Captivate?
I ask because many things like this are read in when Captivate starts. So if it's left running (even with a project closed) it's unaware of changes until the housekeeping routines at startup read it in again.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Source files for sapjco3

Does anyone have access to/know how to get access to the source files for the sapjco library? In particular, I am seeking the .c files that were used to create libsapjco3.so. These are needed for an Android application that I am building.
Thanks!
Jim Daniel

Howdy Erhan,
The short answer is that using jco via mobile is a clean and easy interface, that doesn't involve web services. The entire point of my app (which is a PoC) is to avoid having to set up a .bsp or .jsp page and all the security concerns that comes with it. Using the jco package, you can "log-in" in an analogous manner to the SAP log-on. Again, it's clean, simple and easy.
Having access to the source files, whether in java or c, would be an immense help.
Thanks!
Jim

Source files for flash galleries

Does anybody know if the source files for the flash galleries are to be made available as were those for the CS2 galleries? I have mentioned this in another post but thought it appropriate to make a separate post.

They are. However replacing the swf file in Lightroom to generate new galleries on a windows machine is a little complicated (it is easier on a MAC). It was straightforward in CS2 but actually requires a dissembler to work with the template file inside Lightroom. So for now I think I will just try editing the xml files of the uploaded galleries as that sort of stuff is way beyond me and I have just got a headache trying to understand the Adobe instructions!
Hopefully some clever people will do all the hard work and lots of new Flash galleries will soon be around. There are some nice ones already created take a look
http://opensource.adobe.com/amg/samples/sfbay1/
http://opensource.adobe.com/amg/samples/sfbay2/
http://opensource.adobe.com/amg/samples/sfbay3/
http://opensource.adobe.com/amg/samples/sfbay4/
As these are on the Adobe developer site hopefully they will soon be available for download for Lightroom.

Where the source files for examples of FLASH of the manual (flash_as3_programming.pdf)

Good, I wanted to know where to find the source files for examples of FLASH programming manual with Adobe ActionScript 3.0 (flash_as3_programming.pdf), each sample has a link that had to change and send me the Adobe Developer Center. Thanks,.

Hi,
I had the same problems with the samples. But I got different message. but, instead of typing "ant build", I entered only "ant" on the prompt and I was able to built it.
So, in the comamnd prompt goto your example directory and enter only ant .
The ant will read the build.xml file and you should be able to get it.
bye

Can't find source file for newsservice.NewsServiceProxy in JMS Web Service

i can't find the source file for newsservice.NewsServiceProxy in JMS Web Service. The
newsservice.NewsServiceProxy is required for client to post news to server and received news from server. But
i can't find where the file located in the newsservices.jar provided in that tutorial.
Someone please help me to located it. thank you :)

Hi,
You will have to generate this file. The steps to generate this file has been provided in the Install file present under NewsService/doc/Install.html (once newsservice.jar is extracted) - Running the NewsService client application section - Step 1.
Follow the instructions, and you will be able to download the zip/jar file which contains newsservice.NewsServiceProxy within it.
Regards
Elango.

Can not set source file for Fireworks png in Dreamweaver

I recently purchased Adobe Design Premium CS5 to replace my CS3, but I have a big
problem. When I export a png in Fireworks to Dreamweaver it does not set the source
file correctly. It places the Fireworks object on the page, but when I select the table
that holds the Fireworks object, the path for the source on the Properties panel is
wrong - it says menu2.png. The correct document relative path is dress_images/menu2/menu2.png.
When I drag the Point to File icon over the menu2.png on the Files panel, it correctly displays
the full path, but when I let go of it, it sets the path back to menu2.png. I can not even type it
in the source box and get it to stay.
Here is the problem. When I click on the Edit button, it says it can't find the png. It is using
the full path from the C: drive instead of the document relative path. If I browse to the png file
and open it in Dreamweaver then click the Done button, it saves the png file but does not change
any of the content on the HTML page.
Fireworks and Dreamweaver CS3 worked perfectly here. Help!
I just tried to do this on another computer. This time when I pasted the Fireworks HTML onto the
page in Dreamweaver it set the path correctly (it was a root relative path instead of a document
relative path). I tried to edit in Fireworks using the Edit button, and it opened Fireworks without
any problem. I made some changes then clicked the Done button. Now the Done button is suppose
to be like magic. It is suppose to save the changes to the png file, make the changes on the HTML
page in Dreamweaver, and change any of the supporting files (images) that have been edited. It
always worked this way in CS3, and anything less than this would be a huge step backwards. In this
case, it saved the changes to the png, but did not make any other changes. The web page in
Dreamweaver is still the same. How do I get the Done button to work its magic using CS5.
Another problem - when I paste the code onto the page, the page looks totally messed up. If I save it
and reopen it then it looks fine. However, this never occurred with CS3. Aren't updates to software
suppose to be improvements?
Thanks.
Nathan

Yes, the web site is correctly defined in Dreamweaver. I teach web design for both high school and
adult school, and I have done this procedure 100's of times with CS3. There is something different with
CS5. I took your suggestion and imported the Fireworks HTML using Insert -> Image -> Fireworks HTML,
but it still does not work. I can edit it in Fireworks, hit the Done button, and the png file is saved but
the HTML page remains the same.
Also, the export does not get the path right, and it will not let me set the path right. The only way the path
is right is if the page that I am pasting the Fireworks HTML is in the same folder as the png. It always
sets the png's path as menu.png. Therefore, if the page is in a different folder, the document relative path
won't find it. This was never a problem with CS3. In fact, you could paste the code using Control-V and it
would work 100% of the time. That is how we always did it. When exporting from Fireworks, I would set
Export to "copy to clipboard" then move to Dreamweaver, click where I wanted the code pasted and do Control-V and presto it would
always work. You could come back a month later, select the table, click the Edit button, make changes
in Fireworks, click the Done button and the changes would be reflected on the HTML page in Dreamweaver without
doing anything more. I have tried it with "copy to clipboard" and I have tried it with "export HTML file". Neither
works. There is definitely something different between CS3 and CS5, and right now I am missing CS3.
Thanks for your help. I will keep fighting this until I get it, but any additional input would be appreciated.
Nathan

Archive/source files for web CMS

I produce video for a pair of websites, and am in the process of implementing a web video CMS (thePlatform). I am having some trouble choosing a good source format for my material as I have the following requirements:
-files smalls enough to upload to a web server (DV compression is out)
-files with sufficient quality to withstand transcoding to lossy, more compressed formats like 300k, 320x240, Flash Video, or a suitable video podcast format (h.264, mp4).
-files that will offer some hope of larger, higher quality encodes in the future (say 480x360, 600k), as my source file can live on as an "archive" in the CMS.
I'm considering
video: MPEG-4, 1200k, 640x480, 29.97fps (or source), key frame every 15 frames
audio: 44.1k, 128kbps
I suppose this is a pretty specific question, and a little outside of FCP, but if there are any web video veterans out there I'd love to hear what they are using.
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Trying to upgrade itunes says it cant find the source file for bonjour or quicktime. so it won't update. any help?

Trying to upgrade itunes. it says it needs the source file to upgrade bonjour and quicktime. I downloaded itunes from a website originally. So therefore, i do not have a "source file" now i try to open itunes and i get a message that says something like "action only valid for installed software. Any ideas? oh ya, and i tried to delete itunes and bonjour and quicktime to start all over but it also said it needs the source files.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes, QuickTime and Bonjour entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time?

How do I find source files for a specific sound...

This problem has plagued me through many version of GB. Basically, my roommate creates the garageband files, selects the instruments etc. Invariably when he gives me a copy of the Garageband file GB seems to swap in the instruments for some other instrument without ever alerting me that it's doing it. Basically, nothing sounds the same. We've both done clean installs, installed the same Jampacks. it says the same instruments but sometimes it will swap an organ sound for a string or something not even close.
In Itunes, there's a way to (command-R I believe) find the source file - is there a way to do that in GB? My roommate's computer has an instrument called Piano and Strings - we can't find any file with that name and for some reason no matter what I do I can't access that sound. We're both on MacPros. Recently I alone upgraded to Snow Leopard, but this problem has gone on for years.
What I'd like to do is sort of block GB from swapping in instruments without notifying me, or allowing me to know what those missing sounds are and some way of finding them so a GB file will play roughly the same (obviously acoustics or speakers will differ).
thanks so much for any refs or suggestions.
enzosf

Tell him which instruments you have and limit him to those. Keep everything to a subset of instruments that you both have.
Are you adding to the tracks or just listening? If just listening he can just export to iTunes.

Source file for MSR

Similar Messages

Maybe you are looking for