Source file not accessible after Move project

After moving a project, one of the source code files cannot be opened. The message:
Resource '/Culinaria/src/SearchMenu.mxml' does not exist.
But it does exist - it's residing in the src directory as it always has and is visible in the package explorer. Double clicking to open it provokes the error. The other files in the project can be opened normally.
As said, this problem has surfaced after a Move of the project.
The problem goes away and then comes back after shutting down Flash Developer and starting it up again.
Also, I cannot view one of the source modules in Design mode - I just get an empty gray screen. Again not the case for every file but just one and it persists after shutting down and restarting Flash Developer. It happens to be the main application file and it shows up on the tab as a simple text file when opened in source mode. Here is the first line:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                xmlns:ns1="*"
                width="1500" height="1134.0151"
                backgroundImage="../image/SilvesterTischDeko.jpg" backgroundAlpha="0.85" creationComplete="initCollections();"
                layout="absolute">

Hi Amy,
yes I did Clean the project and a new .swf file is generated (dtLastMod at time of Clean). I can open the module (it's the main application) in source mode but the IDE does not offer the Source/Design buttons and the file icon on the tab is that of a simple text file.
Somehow the Flash Dev. doesn't realize that it is mxml file representing the application even though the header line (see above) is unmistakable.

Similar Messages

Error 1311, Source file not found, measurementstudio5.cab

I'm installing Measurement Studio for Visual Studio 6.0 and I encounter: Error 1311 Source file not found, measurementstudio5.cab
Any ideas?

Hello David,
I am also experiencing an Error 1311, but during the install of LabVIEW 2012 and 2013 (64-Bit).
Win7 x64, Acer laptop.
First problem I encounter is:
After putting in my info and agreeing to the licence agreements, the first error pops up says the followign:
NI LabVIEW Run-Time Engine 2011 SP1:
Error 1310. Error writing to file: Crogram Files (x86)\Internet Explorer\Plugins\LV2011ActiveXcontrol.dll. Verify that you have access to that directory.
Options: Abort/Retry/Ignore
Things I've tried:
Retry button--never get's past the error.
Uninstalling Internet Explorer and restarting--Still assumes that it's there, and error remains.
Reinstalling updated Internet Explorer and restarting -- no change.
Checking the directory file and verifying that permissions for every user and System is set to full control -- No change.
The only way to get past this error seems to be to press the Ignore button.
A few moments after ignoring the first error, another error pops up. It says:
NI Labview Run-Time Engine 2011 SP1:
Error 1311. Source file not found: C:\Users\[my U/N]\Desktop\National Instruments Downloads\LabVIEW 64-bit\2013\Products\LabVIEWruntime_mft.cab. Verify that the file exists and that you can access it.
Options: Retry/Cancel
Things I've tried:
Verifying that the file exists (it does) and that I have access to it (I do) and checking the permissions to verify full control --no changes.
Retry -- does nothing.
Cacel --aborts the installation and indicates instal failure.
Can you help me with this? I've installed LV on two other computers and they worked fine, but my laptop simply doesn't want to take the install.
Thank you in advance,
Thomas

Error 1311 Source file not found? Plus another error. I need help bad!

Error 1311. Source file not found. S:\Documents and Settings\Owner\Local Settings\Temparary Internet Files\content.IE5\45UJKXYZ\ja150000[ 1 ].cab. Verify that the file exists and that you can access it.
That appears when trying to install Java 5 update. What can I do to fix that?
This is another error I've got.
hs_err_pid424 error
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x64DAD49
Function=Java_sun_awt_windows_WToolkit_printWindowsVersion+0x1CB9
Library=C:\Program Files\Java\j2re1.4.2_08\bin\awt.dll
What's those mean and how can I fix them? Plus after installing J2re1.4.2_08 I get a fuzzy looking screen and lines look doubled or outlined some.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Error 1311 Source file not found

Hi.
I have tried to repair my Adobe Acrobat 9.0 because it's not working. I got Error 1311 source file not found.
then the following path c\ProgramFiles(x86)\Adobe\Acrobat9.0\Setup\Files\{AC76BA86-1033-F400-BA7E-000000000004}\D ata1.cab
Verify that the file still exists and that you can access it.
What do I do now? I can't open any PDF files from the net.
Also, I have rec'd the following: Unable to find Adobe PDF resource files.
C\ProgramData\Adobe\AdobePDF\Settings\*.joboptions Then it said you must have administrator privileges to install these files. Contact your local administrator. How do I do this? I am the administrator on my home computer!

Thank you Pat.
A couple of things...
First off I am disabled and sometimes a little slow on the uptake.
Subsequent to my first query, I was successful in downloading the Adobe
Reader XI. However it only allows me to view PDF's that reside on my
computer. If however I want to look at any docs on the web or that people
send me via e-mail I cannot see them They flash for a moment, like a tease
and then say there was a catastrophic crash with not much after that.
If I follow your instructions below, I presume that I will be deleting the
A R X1 as well and as it was very very difficult to get it is the first
place, would you be able to help me with a reinstall?
I think what happened is that my grandson did a "cleanup" on my computer
and deleted only parts of programs...and thus the part that are missing
will not allow for the subsequent updates.
So...thank you for your patience and confirm that I should uninstall and
using the cleaner and then reinstall using the links you provided?
Thank you so much!
Sass
On Wed, Oct 29, 2014 at 1:40 AM, Pat Willener <[email protected]>

I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

Why do they even offer a free trial version of livecycle es4, when its obviously not free??????
i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
a messsage pops up saying Error 13:11 Source file not found verify file exsist. what does that even mean?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

ERROR 1311: Source File Not Found. Data1.cab

Hi
Trying to install upgrade Acrobat Pro XI on Server 2003. We already have Acrobat Pro 9 installed.
Install starts and is halted midway by message "Error 1311: Source File not found. Data1.cab. Verify that the file exists and that you can access it."
Heeeelp me please. Thanks

See the following help document:
Errors 1311, 1335, 2350 :
http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html

Error 1311....source file not found Adobe Acrobat 8.2.0

I have Vista. I keep getting installing boxes and error messages:
Error 1311. Source file not found: C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data 1.cab.
Verify file exists and that you can access it.
I cannot find that file in the set up, so it's obviously missing. I have tried uninstalling, but still get the error messages, even though the Reader is working on my PC...it's just so annoying as I am constantly cancelling installation and cancellation boxes. Can I install this file?
Thanks!
Message was edited by: Woodlandia36

"I tried to uninstall Adobe Creative Master Suite CS3. It hasn't uninstalled completely and has left traces of it still being on my system."
You could always "wipe the slate" clean.
Any and all Adobe folders would be manually deleted. (Shift+Delete to remove them from the hard drive, not send to the recycle bin)
Click Start and Run. Type regedit and hit enter.
Under HKEY_LOCAL_MACHINE\SOFTWARE delete all Adobe Folders (not just the keys, the whole folders - click once and hit Delete)
Under HKEY_CURRENT_USER\SOFTWARE do the same
Under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Change the value for the AllocateCDRoms entry to 0. (Right click and select Modify - type 0 and hit enter)
Exit the Registry Editor.
Reboot
You should not see this error anymore
Note: I only recommend this because you indicate that you have already attempted removing the entire creative suite. This will render it unfunctional if you do it. If you aren't comfortable with editing your registry, disregard these steps.

Error 1311 - source file not found...m182.cab

Good Morning,
I am trying to reinstall Crystal Reports XI on a blade server and the installation will not complete. I receive message, "Error 1311. Source file not found: Z:\win32\m182.cab. Verify that the file exists and that you can access it."
I did a complete uninstall of Crystal Reports and removed the Crystal folders from program files directory as well. Is this a file that may be downloaded"
Thanks,
T.I. Walker
Clarendon Health Systems

Crystal Reports XI has 2 disks that I am using. It never completes installing from disc1, this is when the error occurs. It never advances and prompts to install disc2.
thanks

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

I reinstalled my OS as I do every year or so. when I install CS4 I do not have Premiere Pro Adobe Premiere Pro Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists

Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists and that you can access it.

And what exactly? You have not provided any system info or other details.
Mylenium

Avconvert: source file not found

Hello there,
I searched around here and have found no one get this same error with avconvert (a new command that lets you convert video files in os x lion, the same one used when you right click a video and choose "Encode selected video files"). Whenever I try to do this, convert a video file, I get the same error message: "avconvert: source file not found for source file://localhost/Users/(...) avconvert:failed to create an Export Session. Check setup."
I have tried using this service/command through automator, finder, and terminal, and all return the same error.
I think it's a bug in lion but please someone confirm, and apple fix.
Regards,
Firas A.

here we are 4 months (give or take) and 10.7.1 did not provde a fix. My
"avconvert: failed tocreate an export session. Check setup"
also comes for trying to convert avi files.
Something else that wasn't fully tested before the release of Lion.
I have a DivX account and can't use the player unless I wan't to stare at my desktop with whatever open files and folders that are there, listen to the video but not see it and loose ALL control of everything. I have to efectivly cut the power to the Mac in order to be able to use it.

Error 1308.Source file not found

During installation of Desigtime Component of Identity Manager I get an message:
"Error 1308.Source file not found: C:\Identity Center\DATA_UNITS\IC_DESIGNTIME_71\Setup\program files\SAP\IdM\Identity Center\...\Windows-Change authentication method for RSA Auth Mgr user.dept. Verify that the file exists and that you can access it."
Then I have option to Retry (which does not work); Ignore or Abort.
Please help
Edited by: Junaid Maniya on Dec 31, 2009 8:22 PM

Hello
Sounds like you got a corrupt installation file.
Step 1: Download it again from SAP
Step 2: Extract with 7-zip

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
What can I do?

Run the cleaner tool and install from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Source file not accessible after Move project

Similar Messages

Maybe you are looking for