Source File shows White Screen in Source + Program Monitor

Hello,
I'm having an issue with only one of three media files in my Premiere Pro CS6 project.
When I try to preview this one video file in the Source Monitor, it shows only a white screen, and I can only move the playhead to the beginning and end of the file. I then plopped the clip into the sequence to see if rendering it would give me better luck in the Program Monitor, yet to no avail. The file supposedly successfully rendered, yet when I open the subsequently created "Preview" file in VLC, the entire clip is completely white for its entire duration. (I think it's interesting to note that VLC plays the source file correctly, and that this footage has been successfully used in a separate project in Final Cut after converted to ProRes with Compressor.)
I've opened the file with GSpot to make sure I had the Codec installed, yet GSpot doesn't list any Codec information for this file. It only lists Container information.
(Screen shot of GSpot with white-screen issue in the background)
My Video Card drivers are up to date, taken directly from the chipset's manufacturer's website.
Codec: (See post below for Media Info dump)
Premiere Pro version 6.0.3 (001 (MC: 264587)), installed in English.
Sequence Settings: DVCPROHD 1080i50 default settings (framerate changed to 50FPS)
Windows 7 x64 Service Pack 1, English, 1440x900 32bit Color
Pentium(R) Dual-Core CPU  T4200 @ 2.00 GHz
2GB RAM
Mobile Intel(R) 4 Series Express Chipset Family, Driver version 8.15.10.2869
53.2GB of free space on the SSD all of the media files, the operating system, the Adobe Premiere installation, and scratch disk is located.
I'm unsure of the camera used to record this footage.
Thanks for reading my post, and let me know if you need any more information.

General
ID                                       : 255 (0xFF)
Complete name                            : C:\Video Workspace\Source Media\VSB 01 Stand Bühnenkamera VORNE.mpeg
Format                                   : MPEG-TS
Commercial name                          : HDV 1080i
File size                                : 11.4 GiB
Duration                                 : 1h 0mn
Start time                               : UTC 2011-10-16 17:36:49
End time                                 : UTC 2011-10-16 18:37:17
Overall bit rate mode                    : Constant
Overall bit rate                         : 27.0 Mbps
Maximum Overall bit rate                 : 33.0 Mbps
Encoded date                             : UTC 2011-10-16 17:36:49
Video
ID                                       : 2064 (0x810)
Menu ID                                  : 100 (0x64)
Format                                   : MPEG Video
Commercial name                          : HDV 1080i
Format version                           : Version 2
Format profile                           : Main@High 1440
Format settings, BVOP                    : Yes
Format settings, Matrix                  : Custom
Format settings, GOP                     : M=3, N=12
Codec ID                                 : 2
Duration                                 : 1h 0mn
Bit rate                                 : 25.3 Mbps
Maximum bit rate                         : 25.0 Mbps
Width                                    : 1 440 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 25.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.650
Stream size                              : 10.7 GiB (94%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2068 (0x814)
Menu ID                                  : 100 (0x64)
Format                                   : MPEG Audio
Format version                           : Version 1
Format profile                           : Layer 2
Codec ID                                 : 3
Duration                                 : 1h 0mn
Bit rate mode                            : Constant
Bit rate                                 : 384 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Delay relative to video                  : -40ms
Stream size                              : 166 MiB (1%)
Menu
ID                                       : 129 (0x81)
Menu ID                                  : 100 (0x64)
List                                     : 2064 (0x810) (MPEG Video) / 2068 (0x814) (MPEG Audio) / 2069 (0x815) () / 2065 (0x811) ()

Similar Messages

  • PHP files showing white screen

    I use Bluehost as my hosting service and this problem has
    never occurred before using them as a test server. I run Mac OS X
    and recently followed the tutorial on setting up a PHP5 environment
    on my Mac. Problem is after doing everything as told and testing
    the php to see if it is operating, which it is, I tried viewing th
    PHP files (which only have database connections for dynamic message
    comments) and they only display white screens!! I had the site
    already designed and wanted to switch to this local host method so
    I don't update my site's files when testing changes to my
    pages...but this is not acceptable. I see that many people have the
    same problem on the net, but there are no solutions, just
    complaints. All the HTML pages display in the browser fine in my
    browser:
    http://localhost/~username/Sitefolder/,
    so why is that the php files render whitescreens?
    Apache is running, PHP is running.....I am using my old
    Bluehost SQL databases, but this should not be an issue. I don't
    wish to install MYSQL on my machine when I have it through my
    rovider, and i know this isn't the cause of the issue. Is this some
    faulty php syntax on Dreamweaver's part?

    Travis Coats wrote:
    > All the HTML pages display in the browser fine in my
    browser:
    >
    http://localhost/~username/Sitefolder/,
    so why is that the php files render
    > whitescreens?
    It means that you have an error in your PHP pages, and that
    your host
    has disabled the display of error messages (good for
    security). Put the
    following code at the very top of one of your PHP pages:
    <?php ini_set('display_errors', '1'); ?>
    Reload the page, and see what error message is generated. I
    suspect that
    you have an include file that cannot be found (probably the
    wrong path
    in the include command).
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • My iphone 3gs shows white screen i restored it in itunes then to same problem once i connect my phone to charge i can hear the sound and if i put for silent mode i can fell the vibration so what the problem in my phone

    my iphone 3gs shows white screen i restored it in itunes then to same problem once i connect my phone to charge i can hear the sound and if i put for silent mode i can fell the vibration so what the problem in my phone

    Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it

  • Calendar app shows white screen

    After IOS 8.1 upgrade, Calendar App (synced with gmail calendar)shows white screen with plus sign and magnify glass in upper right, nothing else!  Chatted with Apple Support.  They had me back up IPhone to computer via ITunes and then Restore IPhone.  After Complete Restore, I reinstalled backup from computer.  Same issue.  Still no Calendar.  Any Help would be appreciated.  It is an iPhone 5C.
    Thanks,
    Rick

    I must have filled 20 bug reports at least is teh last 3-4 days (since I upgraded).
    In my early time with Apple products, I used to find one bug per month.
    Came Apple maps and that became once a day (including with wrong locations)
    Now comes iOS 7 and it is ... once every hour or more.
    I just can't believe it !!

  • My ipod restarted while sofwear update .now its just showing white screen

    my ipod restarted while sofwear update .now its just showing white screen...now how can i start my ipod...

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • W550i showing white screen plz help

    My w550i  is showing white screen .i have taken it to a technician.he says it is a software problem it is hanged.plz anyone provide me necessary software to repair it

    According to the SE website, the W550i no longer supports the update service, so you will need to contact your local service centre to get it repaired.

  • Itune showing white screen(ipad3)

    itune showing white screen after upadating my iPad3 to iOS6.
    does anyone have a solution for it or facing same problem.
    seems like iOS6 has some issues better not to update.

    Quit the iTunes app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't help. reboot the iPad. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My Mac Book Pro only show white screen

    When I restart my PC.  It only show white screen.  It cannot go on.  What should I do?

    Hello hugh betcha1,
    The following article provdies some useful troubleshooting steps that may be helpful in getting your Mac to boot.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Cheers,
    Allen

  • HT201407 I am Hamza of Iraq as possible understand me,  bought the iPhone from the owner of the device user and I do not know him and have worked formate device to show white screen and please me to activate the device via email and password Please help m

    I am Hamza of Iraq as possible understand me,  bought the iPhone from the owner of the device user and I do not know him and have worked formate device to show white screen and please me to activate the device via email and password Please help me I am po

    You need the Apple ID and password that was originally used to set up the device. Ask the seller to give it to you. If the seller is unable or unwilling to provide the information, the Phone is probably stolen. There is nothing you can do.

  • My ipod touch 4th generation showed white screen

    My ipod touch 4 has thrown on ground involuntarily. And then it showed all white on screen, i tried to hold ON/OFF SLEEP/WAKE to restart it until Apple logo appears. But it still shows white screen. I really don't know how to do, please help me to fix it. Thanks!!!!!!

    If it did not work, you'll have to get it serviced. Dropping an ipod is not covered by your warranty.
    Out-of-Warranty Service: If your iPod requires service for any other hardware failure that is determined by Apple to be repairable, Apple will service your iPod for the Out-of-Warranty Repair Service fee.
    If you want to set up your iPod for the Out-of-warranty service, we recommend that you take your iPod to a local Apple Authorised Service Provider, where available. Alternatively, you can contactApple Technical Support
    copied from Apple - Support - Service Answer Center

  • HT1414 My ipod touch shows white screen when i turn on. And, it does not register in my computer.

    My Ipod touch don't start up as usual. It doesn't register to my PC. It shows white screen and some time other colors like green and blue. I trying restarting, but that did not work. I cannot restore the IOS because my Ipod touch doesn't even shows up in my Computer.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My mac book pro only shows white screen.

    My mac book pro only shows white screen and then I rebooted with shift+command+P+R and now I have option to restore my computer but I am afraid to lose anything on my hard drive. What do i do?

    Howdy Lowana42,
    Welcome to Apple Support Communities. 
    It sounds like your MacBook Pro has a startup issue that is causing it to only display an Apple logo. Try the suggestions in the article below, they will resolve most issues like this one. 
    How to Troubleshoot iSight
    I hope this helps, 
    -Jason

  • My ipod touch always shows white screen.

    tried holding power and home button simultaneously - doesn't work.
    Tries restoring via itunes - doesn't work.
    Any suggestions to resolve this issue.

    See  Display Shows White Screen Here
    http://support.apple.com/kb/TS2771
    If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

  • My Macbook Pro Showing White Screen At startup

    Macbook pro showing white screen after loading window
    i think its not booting to hdd
    What shoud i do??
    Message was edited by: Krishnaraj7777

    Krishnaraj7777,
    you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the  OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Do you get past the white screen now?

  • My App Store is showing white screen on features and charts display

    My App Store is showing white screen on features and charts display. Any ideas what I should do?

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

Maybe you are looking for

  • Prime Infrastructure 2.0 - Fan Status

    Hi, I created a Custom SNMP template to check  the devices' Fan status. I deployed this template for all my devices (3750, 4510R, Nexus 7k and Nexus 5596). I noticed that is getting data for all unless Nexus 5596 ( 5.1(3)N2(1b)). The strange is that'

  • Table for Individual capacity of Workcenter

    Hi friends, I am working on one requirement for which I need table which is used for storing 'Iindividual capacity' . I could not find the table. Please help. I am not intrested in Capacity table like KAKO , need table for 'Individual capacity' (whic

  • Does anyone from Adobe monitor this forum? Do they even care about this program?

    I've clicked on many of the questions here as I try to learn how to use Story, but I have yet to see any responses from anyone at Adobe. It seems like they treat Story like an afterthought and don't care about its users. My frustration has grown more

  • Not able to start instance

    Hi All, we have oracle rac database 10.2.0.3 on windows server 2003. there are 8 databases on windows server. Its a two rac instance databases. Every Weekend our windows team apply a maintenance patch on windows server. However this weekend after app

  • Please Help!! I'm desperate. DefaultTableModel acting weird

    I wanted to create a JTable using DefaultTableModel so that later I can add/delete rows to the table. I created a class NonEditTable that extends DefaultTableModel that has a constructor accepting data and columnNames. It implements the getRowCount()