Source HU determination while picking

I have set up the outbound scenario with automatic pick-hu creation.
The Picking storage type is HU-managed and each bin contains only 1 HU max.
When WT is created, system determines the source bin but not the HU present inside.
When I confirm the WT in foreground, I have to dropdown(F4) which gives the HU for selection.
Why this is so?.. Why system is not determining the HU present inside the selected bin?
Is there any relation with quantity classification in General setting for Storage type settings?
Please provide your thoughts on this, whether my expectation is correct?.

Hi Santosh
Set up Level of Available Quantity>> under storage type>>
The Level of Avail. Qty determines how the available quantity is determined during a stock removal. The only two options are Storage Bin and Highest-level HU. If the available quantity is determined at the storage bin level, then no HU will be assigned to the warehouse task when it is created. This would allow the warehouse operator to select the stock from any available HU while performing the stock removal.
For example, the available quantity should be set to the storage bin level for bulk storage types. This would allow the warehouse operator to remove the product from any HU that he can access, rather than potentially being told to remove the stock from an inaccessible HU.
If the available quantity is determined at the highest-level HU, then the HU is assigned to the warehouse task when it is created, and the warehouse operator would not have flexibility to specify a different HU during the stock removal. The available quantity should be set to the highest-level HU when the HU must be specified in the warehouse task, such as for staging areas, packing stations, deconsolidation stations, and counting stations.
Regards
Suraj

Similar Messages

Item Category determination while copying

Hello Guys,
What is the difference between Normal Item Category determination and Item category determination while copying? What could be the business logic behind this?
Thanks in advance.
Ravi

I would maintain the entires to confirm what item categories could be copied from a quote AGIS to an TA order.
Normally a TA NORM drives to a TAN. If yo change the quote from a AGN to ZAG, you may want the order to drive to a TAS dropship ship. Just gives you more flexibiilty without any coding.

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

FIFO batch determination while delivery in SD

Hi Experts
I did tried to search FIFO batch determination while delivery in SD, but could not find any solution. Please suggest.
1. Strategy type -SD01
2. Batch search Procedure - SD0001
3. Allocated SD Search procedure to the sales area + Sales doc. Type
4. Activated automatic batch determination in SD.
5. Class - CLASS_FIFO is created with Char- LOBM_LWEDT
6. Sort rule - SORT_FIFO and assigned Char - LOBM_LWEDT
7. Create material and assiged Class - CLASS_FIFO and Batch management is activated
8. Maintained condition record VCH1 in keycombination - Material.
After all above configuration, I am able to do the automatic batch determiation. The suggest where I am wrong.
The same configuration I have done for FEFO and its working.
Thanks in advance.
Regards,
Kaushal Sharma.

I have resolved the problem
Happy to note you have resolved on your own but at the same time, your above comments are not going to help anybody who face similar issue. Please make it as a practice to update the forum properly as to how you resolved
G. Lakshmipathi

ERD not determined while using plain http adapter as Sender

Hi All,
ERD is not determined while using Plain Http Adpter as Sender.Is there any way to determine ERD table by using Http adapteras Sender?
Regards,
Rajesh

Are you doing synchronous scenario???
if yes should have leaving the value for the Software Component Version empty for Receiver determination .
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
/people/jin.shin/blog/2007/12/11/sap-netweaver-process-integration-enhanced-receiver-determination-for-synchronous-scenarios

SOURCE LIST DETERMINATION

Dear all,
          As i got the solution for the problem of "fixing the vendor" i thankful for that.
The problem is again regarding the source list determination as follows--
1) I maitained the inforecord for Material "X" vendors are -- "A" "B" "C"
2) I maitained the source list for Material "X" vendors are -- "A" "B" "C"( here i want the all 3 vendors are to be active for same period like from 01.04.2009 to 31.12.9999)
3) i fix the "A" vendor only.
          As i m going to make a purchase order by different then above three vendor system generates error.Now when i correct the vendor for material i.e i get the vendor list for that material from the vendor tab,i found the 3 vedors for that material A ,B & c.But as i only fix the vendor "A" system only allows the to make po bye vendor "A". no other two vendor allows in that PO. where as those vendors are assign to that..
          in short i want to make all 3 vendors as "fix vendor" for that material for same period.
Hope problem will be clear.
Hoping reply earlier,
Thanking you,
Manish.

dear sir,
           I understand what u mean,but the problem is that,my all 3 vendors are useable for specified time i.e 01.04.2009 to 31.12.2010. At the time being i cant say that ir i cant use any perticualr vendor for perticular time,likeweise follows,
sometimes the vendor "a" provides the rate for steel as 34.00/kg ,the same vendor offers the price 45.0/kg for same month whereas the vendor B" offering the price of steel for 40.00/kg.at that time it will be nothing to think about vendor "A",i will dorectly siwtch over to vendor "B" or "C",now if i have fox the vendor a for time period system should not allows me to capture vendor B" or "C" for purchasing,
Also i cant give any autorisation to user for block or fix the vendir to material or by making changes in source list.
please reply
Manish....

Output determination for picking list

Dear friends,
Where to assign procedure of o/p determination of Picking list.Give me path. Which procedure shall i assign.Pls give me immidiate solution.

Use transaction code NACE for using the o/p determination
Then select V2 for shipping as you are creating o/p for delivery
Create table, maintain access sequence, maintain output type and assign o/p to procedure. Then create the master record in VV21. In o/p you have std functionality to use EDI, email, Print, Fax, ALE
if you are having problem using NACE transaction, use this flow:
SPRO>Logistics Execution>Shipping>Basic Functions>Output Control>Outpur determination>maintain o/p determination for outbound deliveries.
reward points if helpful
Message was edited by:
Comes Naturally

Importance of "Source System Assignment While transporting the objects

Hi Friends,
What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
Thanks in advance for all......
Regards,
Ramesh.

HI Rameshpennabadi ,
This option is only enable for object like transfer rule, data source and IP if you want them to assign source systems,other wise the dialog box Choose Source system by Default? appears.
Thanks,
Deepak

How is the tax code determined while creating a new PO?

Hello,
how is the tax code determined while creating a new PO?

HI,
Tax code refers to a TAXINN /TAX INJ and it always at country level -where the business dealing happens and not dependent on any other factors like vendor or material, company code or plant. etc.
So after you have maintained a Tax code in FTXP in the category as input Tax( V) it would be appears in the Tab Invoice.
where you could manually select the same
For automatic determination as said in the top messages we can maintain an inforecord.
hope so it helps
Regards
Anjanna.
Edited by: Shiva Rajanala on Apr 28, 2009 5:03 PM

Source video determines rendering quality of vector art / type / fonts

I use the same export settings (template) for my webmovies. In this case 400x224 with WMV9 codec.
Why does the background source video determine the final quality of the vector art and type that is rendered thru this template?
The output resolution is always 400x224, but eg. JVC HDV camera images and Kodak HDV camera images generate completely different type and vecotr art after rendering thru the same settings?
I would say, it is vector art, so it will render nice and smooth on any resolution, whatever the background image is. Any help and hints will be appreciated!
Tags: rendering type, rendering vector art, influence source material on type and vector art

Thank you for you're relpy and help Hunt. I appreciate and understand you're hint.
Though it is still weird for me that the 'bad' way PrPro renderes vector art (images and type) differs when different background footage is used.
The render quality of type and vector art is completely different with different background footage. This means my customer will get ugly type and logo's on webmovies with footage from camera X, and smooth type and vector art with footage from camera Y. Both with the same final dimensions after rendering thru the same set of settings.

Error while picking

Hi Friends
I am facing an error while picking goods (after SO while doing OBD) which says "Batch / Valuation types not completely allocated" in Incompletion Log.
There are enough stock of material in batch for the order to be processed.
Can you help me please ?
Thank You
VG

Go to Va02 specify batch material no and check the status on status bar----->goto the line item put(*) in the batch field or press f4 and choose the batch no .
thanks,
Abhay..

What is the source file structure while doing the BDC of mm01

What is the source file structure while doing the BDC of mm01

Hi,
first u create a meterial note the data u enterd in the screens.
if u have created the material successfully then that data structure will be the source structure of the
file.
regards.
Jagadeesh.

How can I determine batches while picking in transaction VL02N?

Hi all, good day.
I would appreciate your suggestions.
I'm developing some RF Transactions and at this point I have to solve the following:
The program process data which the user enters using a handheld; values are send
to the transaction VL02N, using a call transaction technique, for batch split creation
and picking items of a Delivery.
The first point is that when batch is readed from a label it must be validated in the code,
How can I get the batches from the system? I need a function for batch determination.
Besides the second point is if is a good idea to use the call transaction technique,
With which standard funtion could I do the same?
I appreciate so much your support.
Thanks in advance.
Idulio

hi ,
why do u check with BAPIs, find out relavent BAPI to create deliveries , So post /put data into BAPI and SAP will take care of every thing ( like batch deternminations , based on the Config ) .
if u want more just drop a mail , i will revert back if possible
regards
Prabhu
[email protected]

Source Structure determination Dynamically

Hi ,
I got a requirement to develop a File to IDoc scenario. Below are requirement details.
1. Source system application creates maximum 9 XML files of different strucure for each run. File name is generated dynamically by the source application.
2. Each file represents one message(MATMAS, ORDERS01,etc.,) in SAP R/3 (IDoc)
3. Each file has two sections one is header and another details section.
4. Header section structure is same for all the files. and it has a key to determine the document type.
5. Details section structure differs from file to file.
6. PI has to process the source files in the order its created on the source system.
Process flow is : PI has to pick the file/s from the sources system and post the data on SAP R/3 system after data transfermations.
Hope above details help in understaning the requirement. Please suggest me how can i achive this functionaly.
Please give me some light....
Thanks & Regards
Sree

HI Jonnavarapu,
I dont think it is possible using the standard file adapter funcitonality because of the dynamic nature your items are having. For this you need to have an adapter module where you put your own code and then deploy the same and use it.
Else since your header is same for all the files and details are differnet. If you can ask the source file system guys to generate a file in this format:
first 10 fields are for Orders and next 10 fields are for matmas etc. Then you can create a source message type with 20 fields and read that file. Based upon the data inside the items you can route to the corresponding idoc. If they cannot generate this format then you cannot achieve your requirement.
Else you can request them to put the files in different folders and then you can create that many no. of interfaces.
or you need to come up with some generic file communication channel and then use java modules as mentioned in this blog:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Regards,
---Satish

How to determine delivery picking

Hi Experts,
Given delivery material's quantity (LIPS-LFIMG), how to determine this quantity picking will be from a rack storage bin loctaion or an open storgae bin location? Any function module to do that? Thanks a lot.
Yu

Hi,
Every delivery will be attached to Transfer order. You can find the storage bin in LTAP table. filed is VLPLA (Source storage bin).
Br,
Laxmi.Suryadevara

Source HU determination while picking

Similar Messages

Maybe you are looking for